diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.c | 167 |
1 files changed, 163 insertions, 4 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index e5b861f8416d..e69ef4b19239 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -29,12 +29,171 @@ #include "rt2x00.h" #include "rt2x00lib.h" +void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct ieee80211_rate *rate = + ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); + const struct rt2x00_rate *hwrate; + unsigned int data_length; + unsigned int duration; + unsigned int residual; + u16 frame_control; + + memset(txdesc, 0, sizeof(*txdesc)); + + /* + * Initialize information from queue + */ + txdesc->queue = entry->queue->qid; + txdesc->cw_min = entry->queue->cw_min; + txdesc->cw_max = entry->queue->cw_max; + txdesc->aifs = entry->queue->aifs; + + /* Data length should be extended with 4 bytes for CRC */ + data_length = entry->skb->len + 4; + + /* + * Read required fields from ieee80211 header. + */ + frame_control = le16_to_cpu(hdr->frame_control); + + /* + * Check whether this frame is to be acked. + */ + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) + __set_bit(ENTRY_TXD_ACK, &txdesc->flags); + + /* + * Check if this is a RTS/CTS frame + */ + if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { + __set_bit(ENTRY_TXD_BURST, &txdesc->flags); + if (is_rts_frame(frame_control)) + __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags); + else + __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags); + if (tx_info->control.rts_cts_rate_idx >= 0) + rate = + ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info); + } + + /* + * Determine retry information. + */ + txdesc->retry_limit = tx_info->control.retry_limit; + if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); + + /* + * Check if more fragments are pending + */ + if (ieee80211_get_morefrag(hdr)) { + __set_bit(ENTRY_TXD_BURST, &txdesc->flags); + __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags); + } + + /* + * Beacons and probe responses require the tsf timestamp + * to be inserted into the frame. + */ + if (txdesc->queue == QID_BEACON || is_probe_resp(frame_control)) + __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags); + + /* + * Determine with what IFS priority this frame should be send. + * Set ifs to IFS_SIFS when the this is not the first fragment, + * or this fragment came after RTS/CTS. + */ + if (test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { + txdesc->ifs = IFS_SIFS; + } else if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) { + __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags); + txdesc->ifs = IFS_BACKOFF; + } else { + txdesc->ifs = IFS_SIFS; + } + + /* + * PLCP setup + * Length calculation depends on OFDM/CCK rate. + */ + hwrate = rt2x00_get_rate(rate->hw_value); + txdesc->signal = hwrate->plcp; + txdesc->service = 0x04; + + if (hwrate->flags & DEV_RATE_OFDM) { + __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags); + + txdesc->length_high = (data_length >> 6) & 0x3f; + txdesc->length_low = data_length & 0x3f; + } else { + /* + * Convert length to microseconds. + */ + residual = get_duration_res(data_length, hwrate->bitrate); + duration = get_duration(data_length, hwrate->bitrate); + + if (residual != 0) { + duration++; + + /* + * Check if we need to set the Length Extension + */ + if (hwrate->bitrate == 110 && residual <= 30) + txdesc->service |= 0x80; + } + + txdesc->length_high = (duration >> 8) & 0xff; + txdesc->length_low = duration & 0xff; + + /* + * When preamble is enabled we should set the + * preamble bit for the signal. + */ + if (rt2x00_get_rate_preamble(rate->hw_value)) + txdesc->signal |= 0x08; + } +} +EXPORT_SYMBOL_GPL(rt2x00queue_create_tx_descriptor); + +void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + + rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc); + + /* + * All processing on the frame has been completed, this means + * it is now ready to be dumped to userspace through debugfs. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb); + + /* + * We are done writing the frame to the queue entry, + * also kick the queue in case the correct flags are set, + * note that this will automatically filter beacons and + * RTS/CTS frames since those frames don't have this flag + * set. + */ + if (rt2x00dev->ops->lib->kick_tx_queue && + !(skbdesc->flags & FRAME_DESC_DRIVER_GENERATED)) + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, + entry->queue->qid); +} +EXPORT_SYMBOL_GPL(rt2x00queue_write_tx_descriptor); + struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, const enum data_queue_qid queue) { int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); - if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) + if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx) return &rt2x00dev->tx[queue]; if (!rt2x00dev->bcn) @@ -255,11 +414,11 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) /* * We need the following queues: * RX: 1 - * TX: hw->queues + * TX: ops->tx_queues * Beacon: 1 * Atim: 1 (if required) */ - rt2x00dev->data_queues = 2 + rt2x00dev->hw->queues + req_atim; + rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim; queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL); if (!queue) { @@ -272,7 +431,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->rx = queue; rt2x00dev->tx = &queue[1]; - rt2x00dev->bcn = &queue[1 + rt2x00dev->hw->queues]; + rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues]; /* * Initialize queue parameters. |