diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800pci.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 57 |
1 files changed, 13 insertions, 44 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index dfc886fcb44d..d64181cbc9cb 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -48,14 +48,6 @@ #include "rt2800.h" #include "rt2800pci.h" -#ifdef CONFIG_RT2800PCI_PCI_MODULE -#define CONFIG_RT2800PCI_PCI -#endif - -#ifdef CONFIG_RT2800PCI_WISOC_MODULE -#define CONFIG_RT2800PCI_WISOC -#endif - /* * Allow hardware encryption to be disabled. */ @@ -87,7 +79,7 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } -#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_SOC static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */ @@ -98,7 +90,7 @@ static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { } -#endif /* CONFIG_RT2800PCI_WISOC */ +#endif /* CONFIG_RT2800PCI_SOC */ #ifdef CONFIG_RT2800PCI_PCI static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) @@ -461,24 +453,6 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); } -static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && - !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) - return 0; - - msleep(1); - } - - ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); - return -EACCES; -} - static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -487,10 +461,10 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || + if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || rt2800pci_init_queues(rt2x00dev) || rt2800_init_registers(rt2x00dev) || - rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800_wait_wpdma_ready(rt2x00dev) || rt2800_init_bbp(rt2x00dev) || rt2800_init_rfcsr(rt2x00dev))) return -EIO; @@ -570,7 +544,7 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); /* Wait for DMA, ignore error */ - rt2800pci_wait_wpdma_ready(rt2x00dev); + rt2800_wait_wpdma_ready(rt2x00dev); } static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -835,7 +809,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *rxd = entry_priv->desc; __le32 *rxwi = (__le32 *)entry->skb->data; @@ -883,10 +856,8 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; - if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) { + if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) rxdesc->dev_flags |= RXDONE_L2PAD; - skbdesc->flags |= SKBDESC_L2_PADDED; - } if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) rxdesc->flags |= RX_FLAG_SHORT_GI; @@ -927,7 +898,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, * Remove TXWI descriptor from start of buffer. */ skb_pull(entry->skb, RXWI_DESC_SIZE); - skb_trim(entry->skb, rxdesc->size); } /* @@ -1133,8 +1103,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires firmware. */ - if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && - !rt2x00_rt(&rt2x00dev->chip, RT3052)) + if (!rt2x00_rt(rt2x00dev, RT2880) && !rt2x00_rt(rt2x00dev, RT3052)) __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); @@ -1221,7 +1190,7 @@ static const struct rt2x00_ops rt2800pci_ops = { /* * RT2800pci module information. */ -static struct pci_device_id rt2800pci_device_table[] = { +static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) }, @@ -1255,7 +1224,7 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); #endif /* CONFIG_RT2800PCI_PCI */ MODULE_LICENSE("GPL"); -#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_SOC #if defined(CONFIG_RALINK_RT288X) __rt2x00soc_probe(RT2880, &rt2800pci_ops); #elif defined(CONFIG_RALINK_RT305X) @@ -1273,7 +1242,7 @@ static struct platform_driver rt2800soc_driver = { .suspend = rt2x00soc_suspend, .resume = rt2x00soc_resume, }; -#endif /* CONFIG_RT2800PCI_WISOC */ +#endif /* CONFIG_RT2800PCI_SOC */ #ifdef CONFIG_RT2800PCI_PCI static struct pci_driver rt2800pci_driver = { @@ -1290,7 +1259,7 @@ static int __init rt2800pci_init(void) { int ret = 0; -#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_SOC ret = platform_driver_register(&rt2800soc_driver); if (ret) return ret; @@ -1298,7 +1267,7 @@ static int __init rt2800pci_init(void) #ifdef CONFIG_RT2800PCI_PCI ret = pci_register_driver(&rt2800pci_driver); if (ret) { -#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_SOC platform_driver_unregister(&rt2800soc_driver); #endif return ret; @@ -1313,7 +1282,7 @@ static void __exit rt2800pci_exit(void) #ifdef CONFIG_RT2800PCI_PCI pci_unregister_driver(&rt2800pci_driver); #endif -#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_SOC platform_driver_unregister(&rt2800soc_driver); #endif } |