diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800lib.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 289 |
1 files changed, 135 insertions, 154 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 88ce656f96cd..c5738f14c4ba 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -278,12 +278,9 @@ static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = { [EEPROM_LNA] = 0x0026, [EEPROM_EXT_LNA2] = 0x0027, [EEPROM_RSSI_BG] = 0x0028, - [EEPROM_TXPOWER_DELTA] = 0x0028, /* Overlaps with RSSI_BG */ [EEPROM_RSSI_BG2] = 0x0029, - [EEPROM_TXMIXER_GAIN_BG] = 0x0029, /* Overlaps with RSSI_BG2 */ [EEPROM_RSSI_A] = 0x002a, [EEPROM_RSSI_A2] = 0x002b, - [EEPROM_TXMIXER_GAIN_A] = 0x002b, /* Overlaps with RSSI_A2 */ [EEPROM_TXPOWER_BG1] = 0x0030, [EEPROM_TXPOWER_BG2] = 0x0037, [EEPROM_EXT_TXPOWER_BG3] = 0x003e, @@ -1783,7 +1780,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) rt2800_bbp_read(rt2x00dev, 3, &r3); if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2800_config_3572bt_ant(rt2x00dev); /* @@ -1795,7 +1792,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) break; case 2: if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1); else rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); @@ -1825,7 +1822,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) break; case 2: if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + rt2x00_has_cap_bt_coexist(rt2x00dev)) { rt2x00_set_field8(&r3, BBP3_RX_ADC, 1); rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); @@ -2029,13 +2026,6 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, rt2x00dev->default_ant.tx_chain_num <= 2); rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); @@ -2141,7 +2131,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rf->channel <= 14) { rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); @@ -2674,7 +2664,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, if (rf->channel <= 14) { int idx = rf->channel-1; - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { /* r55/r59 value array of channel 1~14 */ static const char r55_bt_rev[] = {0x83, 0x83, @@ -3152,6 +3142,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, case RF3322: rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); break; + case RF3070: case RF5360: case RF5370: case RF5372: @@ -3166,7 +3157,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); } - if (rt2x00_rf(rt2x00dev, RF3290) || + if (rt2x00_rf(rt2x00dev, RF3070) || + rt2x00_rf(rt2x00dev, RF3290) || rt2x00_rf(rt2x00dev, RF3322) || rt2x00_rf(rt2x00dev, RF5360) || rt2x00_rf(rt2x00dev, RF5370) || @@ -3218,8 +3210,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, if (rf->channel <= 14) { if (!rt2x00_rt(rt2x00dev, RT5390) && !rt2x00_rt(rt2x00dev, RT5392)) { - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, - &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { rt2800_bbp_write(rt2x00dev, 82, 0x62); rt2800_bbp_write(rt2x00dev, 75, 0x46); } else { @@ -3244,7 +3235,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, if (rt2x00_rt(rt2x00dev, RT3593)) rt2800_bbp_write(rt2x00dev, 83, 0x9a); - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 75, 0x46); else rt2800_bbp_write(rt2x00dev, 75, 0x50); @@ -3280,7 +3271,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, /* Turn on primary PAs */ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); else rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, @@ -3311,33 +3302,50 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - if (rt2x00_rt(rt2x00dev, RT3572)) + if (rt2x00_rt(rt2x00dev, RT3572)) { rt2800_rfcsr_write(rt2x00dev, 8, 0x80); + /* AGC init */ + if (rf->channel <= 14) + reg = 0x1c + (2 * rt2x00dev->lna_gain); + else + reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3); + + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + } + if (rt2x00_rt(rt2x00dev, RT3593)) { - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); + rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - /* Band selection. GPIO #8 controls all paths */ + /* Band selection */ + if (rt2x00_is_usb(rt2x00dev) || + rt2x00_is_pcie(rt2x00dev)) { + /* GPIO #8 controls all paths */ rt2x00_set_field32(®, GPIO_CTRL_DIR8, 0); if (rf->channel <= 14) rt2x00_set_field32(®, GPIO_CTRL_VAL8, 1); else rt2x00_set_field32(®, GPIO_CTRL_VAL8, 0); + } + /* LNA PE control. */ + if (rt2x00_is_usb(rt2x00dev)) { + /* GPIO #4 controls PE0 and PE1, + * GPIO #7 controls PE2 + */ rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0); - /* LNA PE control. - * GPIO #4 controls PE0 and PE1, - * GPIO #7 controls PE2 - */ rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1); - - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + } else if (rt2x00_is_pcie(rt2x00dev)) { + /* GPIO #4 controls PE0, PE1 and PE2 */ + rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); + rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); } + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + /* AGC init */ if (rf->channel <= 14) reg = 0x1c + 2 * rt2x00dev->lna_gain; @@ -3565,7 +3573,7 @@ static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev, { int delta; - if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_power_limit(rt2x00dev)) return 0; /* @@ -3594,7 +3602,7 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, if (rt2x00_rt(rt2x00dev, RT3593)) return min_t(u8, txpower, 0xc); - if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_power_limit(rt2x00dev)) { /* * Check if eirp txpower exceed txpower_limit. * We use OFDM 6M as criterion and its eirp txpower @@ -4264,6 +4272,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); break; case RF3053: + case RF3070: case RF3290: case RF5360: case RF5370: @@ -4405,6 +4414,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) rt2x00_rt(rt2x00dev, RT3290) || rt2x00_rt(rt2x00dev, RT3390) || rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392) || rt2x00_rt(rt2x00dev, RT5592)) @@ -4412,8 +4422,8 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) else vgc = 0x2e + rt2x00dev->lna_gain; } else { /* 5GHZ band */ - if (rt2x00_rt(rt2x00dev, RT3572)) - vgc = 0x22 + (rt2x00dev->lna_gain * 5) / 3; + if (rt2x00_rt(rt2x00dev, RT3593)) + vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; else if (rt2x00_rt(rt2x00dev, RT5592)) vgc = 0x24 + (2 * rt2x00dev->lna_gain); else { @@ -4431,11 +4441,17 @@ static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, u8 vgc_level) { if (qual->vgc_level != vgc_level) { - if (rt2x00_rt(rt2x00dev, RT5592)) { + if (rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593)) { + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, + vgc_level); + } else if (rt2x00_rt(rt2x00dev, RT5592)) { rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a); rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level); - } else + } else { rt2800_bbp_write(rt2x00dev, 66, vgc_level); + } + qual->vgc_level = vgc_level; qual->vgc_level_reg = vgc_level; } @@ -4454,17 +4470,35 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) return; - /* - * When RSSI is better then -80 increase VGC level with 0x10, except - * for rt5592 chip. + + /* When RSSI is better than a certain threshold, increase VGC + * with a chip specific value in order to improve the balance + * between sensibility and noise isolation. */ vgc = rt2800_get_default_vgc(rt2x00dev); - if (rt2x00_rt(rt2x00dev, RT5592) && qual->rssi > -65) - vgc += 0x20; - else if (qual->rssi > -80) - vgc += 0x10; + switch (rt2x00dev->chip.rt) { + case RT3572: + case RT3593: + if (qual->rssi > -65) { + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) + vgc += 0x20; + else + vgc += 0x10; + } + break; + + case RT5592: + if (qual->rssi > -65) + vgc += 0x20; + break; + + default: + if (qual->rssi > -80) + vgc += 0x10; + break; + } rt2800_set_vgc(rt2x00dev, qual, vgc); } @@ -5489,7 +5523,7 @@ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) ant = (div_mode == 3) ? 1 : 0; /* check if this is a Bluetooth combo card */ - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { u32 reg; rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); @@ -5798,7 +5832,7 @@ static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev) rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { - if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_external_lna_bg(rt2x00dev)) rt2x00_set_field8(&rfcsr, RFCSR17_R, 1); } @@ -5985,7 +6019,7 @@ static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 20, 0xba); rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 25, 0x03); rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { @@ -6441,7 +6475,7 @@ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 28, 0x00); rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); rt2800_rfcsr_write(rt2x00dev, 31, 0x80); rt2800_rfcsr_write(rt2x00dev, 32, 0x80); rt2800_rfcsr_write(rt2x00dev, 33, 0x00); @@ -6479,7 +6513,7 @@ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 56, 0x22); rt2800_rfcsr_write(rt2x00dev, 57, 0x80); rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x63); + rt2800_rfcsr_write(rt2x00dev, 59, 0x8f); rt2800_rfcsr_write(rt2x00dev, 60, 0x45); if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) @@ -6499,7 +6533,6 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) rt2800_rf_init_calibration(rt2x00dev, 2); rt2800_rfcsr_write(rt2x00dev, 1, 0x17); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); rt2800_rfcsr_write(rt2x00dev, 3, 0x88); rt2800_rfcsr_write(rt2x00dev, 5, 0x10); rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); @@ -6653,17 +6686,20 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) u16 word; /* - * Initialize all registers. + * Initialize MAC registers. */ if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || rt2800_init_registers(rt2x00dev))) return -EIO; + /* + * Wait BBP/RF to wake up. + */ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev))) return -EIO; /* - * Send signal to firmware during boot time. + * Send signal during boot time to initialize firmware. */ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); @@ -6672,9 +6708,15 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); msleep(1); + /* + * Make sure BBP is up and running. + */ if (unlikely(rt2800_wait_bbp_ready(rt2x00dev))) return -EIO; + /* + * Initialize BBP/RF registers. + */ rt2800_init_bbp(rt2x00dev); rt2800_init_rfcsr(rt2x00dev); @@ -7021,6 +7063,7 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) case RF3022: case RF3052: case RF3053: + case RF3070: case RF3290: case RF3320: case RF3322: @@ -7203,7 +7246,7 @@ static const struct rf_channel rf_vals[] = { /* * RF value list for rt3xxx - * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052) + * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053) */ static const struct rf_channel rf_vals_3x[] = { {1, 241, 2, 2 }, @@ -7399,72 +7442,6 @@ static const struct rf_channel rf_vals_5592_xtal40[] = { {196, 83, 0, 12, 1}, }; -static const struct rf_channel rf_vals_3053[] = { - /* Channel, N, R, K */ - {1, 241, 2, 2}, - {2, 241, 2, 7}, - {3, 242, 2, 2}, - {4, 242, 2, 7}, - {5, 243, 2, 2}, - {6, 243, 2, 7}, - {7, 244, 2, 2}, - {8, 244, 2, 7}, - {9, 245, 2, 2}, - {10, 245, 2, 7}, - {11, 246, 2, 2}, - {12, 246, 2, 7}, - {13, 247, 2, 2}, - {14, 248, 2, 4}, - - {36, 0x56, 0, 4}, - {38, 0x56, 0, 6}, - {40, 0x56, 0, 8}, - {44, 0x57, 0, 0}, - {46, 0x57, 0, 2}, - {48, 0x57, 0, 4}, - {52, 0x57, 0, 8}, - {54, 0x57, 0, 10}, - {56, 0x58, 0, 0}, - {60, 0x58, 0, 4}, - {62, 0x58, 0, 6}, - {64, 0x58, 0, 8}, - - {100, 0x5B, 0, 8}, - {102, 0x5B, 0, 10}, - {104, 0x5C, 0, 0}, - {108, 0x5C, 0, 4}, - {110, 0x5C, 0, 6}, - {112, 0x5C, 0, 8}, - - /* NOTE: Channel 114 has been removed intentionally. - * The EEPROM contains no TX power values for that, - * and it is disabled in the vendor driver as well. - */ - - {116, 0x5D, 0, 0}, - {118, 0x5D, 0, 2}, - {120, 0x5D, 0, 4}, - {124, 0x5D, 0, 8}, - {126, 0x5D, 0, 10}, - {128, 0x5E, 0, 0}, - {132, 0x5E, 0, 4}, - {134, 0x5E, 0, 6}, - {136, 0x5E, 0, 8}, - {140, 0x5F, 0, 0}, - - {149, 0x5F, 0, 9}, - {151, 0x5F, 0, 11}, - {153, 0x60, 0, 1}, - {157, 0x60, 0, 5}, - {159, 0x60, 0, 7}, - {161, 0x60, 0, 9}, - {165, 0x61, 0, 1}, - {167, 0x61, 0, 3}, - {169, 0x61, 0, 5}, - {171, 0x61, 0, 7}, - {173, 0x61, 0, 9}, -}; - static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; @@ -7473,7 +7450,6 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) char *default_power2; char *default_power3; unsigned int i; - u16 eeprom; u32 reg; /* @@ -7522,48 +7498,48 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->max_report_rates = 7; rt2x00dev->hw->max_rate_tries = 1; - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); - /* * Initialize hw_mode information. */ - spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - if (rt2x00_rf(rt2x00dev, RF2820) || - rt2x00_rf(rt2x00dev, RF2720)) { + switch (rt2x00dev->chip.rf) { + case RF2720: + case RF2820: spec->num_channels = 14; spec->channels = rf_vals; - } else if (rt2x00_rf(rt2x00dev, RF2850) || - rt2x00_rf(rt2x00dev, RF2750)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; + break; + + case RF2750: + case RF2850: spec->num_channels = ARRAY_SIZE(rf_vals); spec->channels = rf_vals; - } else if (rt2x00_rf(rt2x00dev, RF3020) || - rt2x00_rf(rt2x00dev, RF2020) || - rt2x00_rf(rt2x00dev, RF3021) || - rt2x00_rf(rt2x00dev, RF3022) || - rt2x00_rf(rt2x00dev, RF3290) || - rt2x00_rf(rt2x00dev, RF3320) || - rt2x00_rf(rt2x00dev, RF3322) || - rt2x00_rf(rt2x00dev, RF5360) || - rt2x00_rf(rt2x00dev, RF5370) || - rt2x00_rf(rt2x00dev, RF5372) || - rt2x00_rf(rt2x00dev, RF5390) || - rt2x00_rf(rt2x00dev, RF5392)) { + break; + + case RF2020: + case RF3020: + case RF3021: + case RF3022: + case RF3070: + case RF3290: + case RF3320: + case RF3322: + case RF5360: + case RF5370: + case RF5372: + case RF5390: + case RF5392: spec->num_channels = 14; spec->channels = rf_vals_3x; - } else if (rt2x00_rf(rt2x00dev, RF3052)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; + break; + + case RF3052: + case RF3053: spec->num_channels = ARRAY_SIZE(rf_vals_3x); spec->channels = rf_vals_3x; - } else if (rt2x00_rf(rt2x00dev, RF3053)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_3053); - spec->channels = rf_vals_3053; - } else if (rt2x00_rf(rt2x00dev, RF5592)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; + break; + case RF5592: rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, ®); if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) { spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40); @@ -7572,11 +7548,16 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20); spec->channels = rf_vals_5592_xtal20; } + break; } if (WARN_ON_ONCE(!spec->channels)) return -ENODEV; + spec->supported_bands = SUPPORT_BAND_2GHZ; + if (spec->num_channels > 14) + spec->supported_bands |= SUPPORT_BAND_5GHZ; + /* * Initialize HT information. */ @@ -7591,22 +7572,21 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40; - if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) >= 2) + if (rt2x00dev->default_ant.tx_chain_num >= 2) spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC; - spec->ht.cap |= - rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) << - IEEE80211_HT_CAP_RX_STBC_SHIFT; + spec->ht.cap |= rt2x00dev->default_ant.rx_chain_num << + IEEE80211_HT_CAP_RX_STBC_SHIFT; spec->ht.ampdu_factor = 3; spec->ht.ampdu_density = 4; spec->ht.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED | IEEE80211_HT_MCS_TX_RX_DIFF | - ((rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); + ((rt2x00dev->default_ant.tx_chain_num - 1) << + IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - switch (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH)) { + switch (rt2x00dev->default_ant.rx_chain_num) { case 3: spec->ht.mcs.rx_mask[2] = 0xff; case 2: @@ -7671,6 +7651,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) case RF3320: case RF3052: case RF3053: + case RF3070: case RF3290: case RF5360: case RF5370: |