diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2500usb.c | 33 |
1 files changed, 29 insertions, 4 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3558cb210747..cd5af656932d 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -633,6 +633,16 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.vgc_level = value; } +/* + * NOTE: This function is directly ported from legacy driver, but + * despite it being declared it was never called. Although link tuning + * sounds like a good idea, and usually works well for the other drivers, + * it does _not_ work with rt2500usb. Enabling this function will result + * in TX capabilities only until association kicks in. Immediately + * after the successful association all TX frames will be kept in the + * hardware queue and never transmitted. + */ +#if 0 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) { int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); @@ -752,6 +762,9 @@ dynamic_cca_tune: rt2x00dev->link.vgc_level = r17; } } +#else +#define rt2500usb_link_tuner NULL +#endif /* * Initialization functions. @@ -1121,6 +1134,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) int pipe = usb_sndbulkpipe(usb_dev, 1); int length; u16 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1130,6 +1144,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1364,6 +1389,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); + } else { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); @@ -1372,9 +1400,6 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); - } else { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); @@ -1650,7 +1675,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; @@ -1726,6 +1750,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); /* * Set the rssi offset. |