summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h')
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h423
1 files changed, 423 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h
new file mode 100644
index 000000000000..0fee5e0e55c2
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h
@@ -0,0 +1,423 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_PWRSEQ_H__
+#define __RTL8723BE_PWRSEQ_H__
+
+#include "../pwrseqcmd.h"
+/**
+ * Check document WM-20130425-JackieLau-RTL8723B_Power_Architecture v05.vsd
+ * There are 6 HW Power States:
+ * 0: POFF--Power Off
+ * 1: PDN--Power Down
+ * 2: CARDEMU--Card Emulation
+ * 3: ACT--Active Mode
+ * 4: LPS--Low Power State
+ * 5: SUS--Suspend
+ *
+ * The transision from different states are defined below
+ * TRANS_CARDEMU_TO_ACT
+ * TRANS_ACT_TO_CARDEMU
+ * TRANS_CARDEMU_TO_SUS
+ * TRANS_SUS_TO_CARDEMU
+ * TRANS_CARDEMU_TO_PDN
+ * TRANS_ACT_TO_LPS
+ * TRANS_LPS_TO_ACT
+ *
+ * TRANS_END
+ */
+#define RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS 23
+#define RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS 15
+#define RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS 15
+#define RTL8723B_TRANS_SUS_TO_CARDEMU_STEPS 15
+#define RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS 15
+#define RTL8723B_TRANS_PDN_TO_CARDEMU_STEPS 15
+#define RTL8723B_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8723B_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8723B_TRANS_END_STEPS 1
+
+#define RTL8723B_TRANS_CARDEMU_TO_ACT \
+ /* format */ \
+ /* comments here */ \
+ /* {offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value}, */\
+ /*0x20[0] = 1b'1 enable LDOA12 MACRO block for all interface*/ \
+ {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*0x67[0] = 0 to disable BT_GPS_SEL pins*/ \
+ {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ /*Delay 1ms*/ \
+ {0x0001, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 1, PWRSEQ_DELAY_MS}, \
+ /*0x00[5] = 1b'0 release analog Ips to digital ,1:isolation*/ \
+ {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), 0}, \
+ /* disable SW LPS 0x04[10]=0 and WLSUS_EN 0x04[11]=0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)|BIT(2)), 0}, \
+ /* Disable USB suspend */ \
+ {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , BIT(0)}, \
+ /* wait till 0x04[17] = 1 power ready*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ /* Enable USB suspend */ \
+ {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , 0}, \
+ /* release WLON reset 0x04[16]=1*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /* disable HWPDN 0x04[15]=0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
+ /* disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0}, \
+ /* polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \
+ /* Enable WL control XTAL setting*/ \
+ {0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)}, \
+ /*Enable falling edge triggering interrupt*/ \
+ {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*Enable GPIO9 interrupt mode*/ \
+ {0x0063, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*Enable GPIO9 input mode*/ \
+ {0x0062, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ /*Enable HSISR GPIO[C:0] interrupt*/ \
+ {0x0058, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*Enable HSISR GPIO9 interrupt*/ \
+ {0x005A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*For GPIO9 internal pull high setting by test chip*/ \
+ {0x0068, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3), BIT(3)}, \
+ /*For GPIO9 internal pull high setting*/ \
+ {0x0069, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)},
+
+#define RTL8723B_TRANS_ACT_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*0x1F[7:0] = 0 turn off RF*/ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ /*0x4C[24] = 0x4F[0] = 0, */ \
+ /*switch DPDT_SEL_P output from register 0x65[2] */ \
+ {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ /*Enable rising edge triggering interrupt*/ \
+ {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \
+ /* Enable BT control XTAL setting*/ \
+ {0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), 0}, \
+ /*0x00[5] = 1b'1 analog Ips to digital ,1:isolation*/ \
+ {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(5), BIT(5)}, \
+ /*0x20[0] = 1b'0 disable LDOA12 MACRO block*/ \
+ {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(0), 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_SUS \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))}, \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
+ /*0x23[4] = 1b'1 12H LDO enter sleep mode*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ /*0x07[7:0] = 0x20 SDIO SOP option to disable BG/MB/ACK/SWR*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, \
+ /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8723B_TRANS_SUS_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*clear suspend enable and power down enable*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ /*0x23[4] = 1b'0 12H LDO enter normal mode*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_CARDDIS \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*0x07=0x20 , SOP option to disable BG/MB*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ /*0x04[10] = 1, enable SW LPS*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), BIT(2)}, \
+ /*0x48[16] = 1 to enable GPIO9 as EXT WAKEUP*/ \
+ {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 1}, \
+ /*0x23[4] = 1b'1 12H LDO enter sleep mode*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8723B_TRANS_CARDDIS_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*clear suspend enable and power down enable*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/ \
+ {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \
+ /*0x23[4] = 1b'0 12H LDO enter normal mode*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ /*PCIe DMA start*/ \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_PDN \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*0x23[4] = 1b'1 12H LDO enter sleep mode*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ /*0x07[7:0] = 0x20 SOP option to disable BG/MB/ACK/SWR*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_SDIO_MSK | PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, 0xFF, 0x20}, \
+ /* 0x04[16] = 0*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ /* 0x04[15] = 1*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},
+
+#define RTL8723B_TRANS_PDN_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /* 0x04[15] = 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},
+
+#define RTL8723B_TRANS_ACT_TO_LPS \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*PCIe DMA stop*/ \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /*Tx Pause*/ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ /*Delay 1us*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
+ /*Whole BB is reset*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ /*Reset MAC TRX*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03}, \
+ /*check if removed later*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ /*When driver enter Sus/ Disable, enable LOP for BT*/ \
+ {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00}, \
+ /*Respond TxOK to scheduler*/ \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},
+
+#define RTL8723B_TRANS_LPS_TO_ACT \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ /*SDIO RPWM*/ \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*USB RPWM*/ \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*PCIe RPWM*/ \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*Delay*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \
+ /*. 0x08[4] = 0 switch TSF to 40M*/ \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ /*Polling 0x109[7]=0 TSF in 40M*/ \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \
+ /*. 0x29[7:6] = 2b'00 enable BB clock*/ \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \
+ /*. 0x101[1] = 1*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*. 0x100[7:0] = 0xFF enable WMAC TRX*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /*. 0x02[1:0] = 2b'11 enable BB macro*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
+ /*. 0x522 = 0*/ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},
+
+#define RTL8723B_TRANS_END \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \
+ PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8723B_power_on_flow
+ [RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_radio_off_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_card_disable_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_card_enable_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_suspend_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_resume_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_hwpdn_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_enter_lps_flow
+ [RTL8723B_TRANS_ACT_TO_LPS_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_leave_lps_flow
+ [RTL8723B_TRANS_LPS_TO_ACT_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+
+/* RTL8723 Power Configuration CMDs for PCIe interface */
+#define RTL8723_NIC_PWR_ON_FLOW rtl8723B_power_on_flow
+#define RTL8723_NIC_RF_OFF_FLOW rtl8723B_radio_off_flow
+#define RTL8723_NIC_DISABLE_FLOW rtl8723B_card_disable_flow
+#define RTL8723_NIC_ENABLE_FLOW rtl8723B_card_enable_flow
+#define RTL8723_NIC_SUSPEND_FLOW rtl8723B_suspend_flow
+#define RTL8723_NIC_RESUME_FLOW rtl8723B_resume_flow
+#define RTL8723_NIC_PDN_FLOW rtl8723B_hwpdn_flow
+#define RTL8723_NIC_LPS_ENTER_FLOW rtl8723B_enter_lps_flow
+#define RTL8723_NIC_LPS_LEAVE_FLOW rtl8723B_leave_lps_flow
+
+#endif
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 19:02:51 +0300