diff options
Diffstat (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c')
| -rw-r--r-- | drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 2548 |
1 files changed, 2548 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c new file mode 100644 index 000000000000..12b0978ba4fa --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c @@ -0,0 +1,2548 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2012 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../efuse.h" +#include "../base.h" +#include "../regd.h" +#include "../cam.h" +#include "../ps.h" +#include "../pci.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "fw.h" +#include "led.h" +#include "hw.h" + +void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + switch (variable) { + case HW_VAR_RCR: { + *((u32 *) (val)) = rtlpci->receive_config; + break; + } + case HW_VAR_RF_STATE: { + *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; + break; + } + case HW_VAR_FW_PSMODE_STATUS: { + *((bool *) (val)) = ppsc->fw_current_inpsmode; + break; + } + case HW_VAR_CORRECT_TSF: { + u64 tsf; + u32 *ptsf_low = (u32 *)&tsf; + u32 *ptsf_high = ((u32 *)&tsf) + 1; + + *ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4)); + *ptsf_low = rtl_read_dword(rtlpriv, TSFR); + + *((u64 *) (val)) = tsf; + + break; + } + case HW_VAR_MRC: { + *((bool *)(val)) = rtlpriv->dm.current_mrc_switch; + break; + } + default: { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "switch case not processed\n"); + break; + } + } +} + +void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + switch (variable) { + case HW_VAR_ETHER_ADDR:{ + rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]); + rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]); + break; + } + case HW_VAR_BASIC_RATE:{ + u16 rate_cfg = ((u16 *) val)[0]; + u8 rate_index = 0; + + if (rtlhal->version == VERSION_8192S_ACUT) + rate_cfg = rate_cfg & 0x150; + else + rate_cfg = rate_cfg & 0x15f; + + rate_cfg |= 0x01; + + rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff); + rtl_write_byte(rtlpriv, RRSR + 1, + (rate_cfg >> 8) & 0xff); + + while (rate_cfg > 0x1) { + rate_cfg = (rate_cfg >> 1); + rate_index++; + } + rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index); + + break; + } + case HW_VAR_BSSID:{ + rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]); + rtl_write_word(rtlpriv, BSSIDR + 4, + ((u16 *)(val + 4))[0]); + break; + } + case HW_VAR_SIFS:{ + rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]); + rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]); + break; + } + case HW_VAR_SLOT_TIME:{ + u8 e_aci; + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + "HW_VAR_SLOT_TIME %x\n", val[0]); + + rtl_write_byte(rtlpriv, SLOT_TIME, val[0]); + + for (e_aci = 0; e_aci < AC_MAX; e_aci++) { + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_AC_PARAM, + (&e_aci)); + } + break; + } + case HW_VAR_ACK_PREAMBLE:{ + u8 reg_tmp; + u8 short_preamble = (bool) (*val); + reg_tmp = (mac->cur_40_prime_sc) << 5; + if (short_preamble) + reg_tmp |= 0x80; + + rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp); + break; + } + case HW_VAR_AMPDU_MIN_SPACE:{ + u8 min_spacing_to_set; + u8 sec_min_space; + + min_spacing_to_set = *val; + if (min_spacing_to_set <= 7) { + if (rtlpriv->sec.pairwise_enc_algorithm == + NO_ENCRYPTION) + sec_min_space = 0; + else + sec_min_space = 1; + + if (min_spacing_to_set < sec_min_space) + min_spacing_to_set = sec_min_space; + if (min_spacing_to_set > 5) + min_spacing_to_set = 5; + + mac->min_space_cfg = + ((mac->min_space_cfg & 0xf8) | + min_spacing_to_set); + + *val = min_spacing_to_set; + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", + mac->min_space_cfg); + + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, + mac->min_space_cfg); + } + break; + } + case HW_VAR_SHORTGI_DENSITY:{ + u8 density_to_set; + + density_to_set = *val; + mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg; + mac->min_space_cfg |= (density_to_set << 3); + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + "Set HW_VAR_SHORTGI_DENSITY: %#x\n", + mac->min_space_cfg); + + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, + mac->min_space_cfg); + + break; + } + case HW_VAR_AMPDU_FACTOR:{ + u8 factor_toset; + u8 regtoset; + u8 factorlevel[18] = { + 2, 4, 4, 7, 7, 13, 13, + 13, 2, 7, 7, 13, 13, + 15, 15, 15, 15, 0}; + u8 index = 0; + + factor_toset = *val; + if (factor_toset <= 3) { + factor_toset = (1 << (factor_toset + 2)); + if (factor_toset > 0xf) + factor_toset = 0xf; + + for (index = 0; index < 17; index++) { + if (factorlevel[index] > factor_toset) + factorlevel[index] = + factor_toset; + } + + for (index = 0; index < 8; index++) { + regtoset = ((factorlevel[index * 2]) | + (factorlevel[index * + 2 + 1] << 4)); + rtl_write_byte(rtlpriv, + AGGLEN_LMT_L + index, + regtoset); + } + + regtoset = ((factorlevel[16]) | + (factorlevel[17] << 4)); + rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset); + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + "Set HW_VAR_AMPDU_FACTOR: %#x\n", + factor_toset); + } + break; + } + case HW_VAR_AC_PARAM:{ + u8 e_aci = *val; + rtl92s_dm_init_edca_turbo(hw); + + if (rtlpci->acm_method != EACMWAY2_SW) + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_ACM_CTRL, + &e_aci); + break; + } + case HW_VAR_ACM_CTRL:{ + u8 e_aci = *val; + union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&( + mac->ac[0].aifs)); + u8 acm = p_aci_aifsn->f.acm; + u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl); + + acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? + 0x0 : 0x1); + + if (acm) { + switch (e_aci) { + case AC0_BE: + acm_ctrl |= AcmHw_BeqEn; + break; + case AC2_VI: + acm_ctrl |= AcmHw_ViqEn; + break; + case AC3_VO: + acm_ctrl |= AcmHw_VoqEn; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", + acm); + break; + } + } else { + switch (e_aci) { + case AC0_BE: + acm_ctrl &= (~AcmHw_BeqEn); + break; + case AC2_VI: + acm_ctrl &= (~AcmHw_ViqEn); + break; + case AC3_VO: + acm_ctrl &= (~AcmHw_VoqEn); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "switch case not processed\n"); + break; + } + } + + RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE, + "HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl); + rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl); + break; + } + case HW_VAR_RCR:{ + rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]); + rtlpci->receive_config = ((u32 *) (val))[0]; + break; + } + case HW_VAR_RETRY_LIMIT:{ + u8 retry_limit = val[0]; + + rtl_write_word(rtlpriv, RETRY_LIMIT, + retry_limit << RETRY_LIMIT_SHORT_SHIFT | + retry_limit << RETRY_LIMIT_LONG_SHIFT); + break; + } + case HW_VAR_DUAL_TSF_RST: { + break; + } + case HW_VAR_EFUSE_BYTES: { + rtlefuse->efuse_usedbytes = *((u16 *) val); + break; + } + case HW_VAR_EFUSE_USAGE: { + rtlefuse->efuse_usedpercentage = *val; + break; + } + case HW_VAR_IO_CMD: { + break; + } + case HW_VAR_WPA_CONFIG: { + rtl_write_byte(rtlpriv, REG_SECR, *val); + break; + } + case HW_VAR_SET_RPWM:{ + break; + } + case HW_VAR_H2C_FW_PWRMODE:{ + break; + } + case HW_VAR_FW_PSMODE_STATUS: { + ppsc->fw_current_inpsmode = *((bool *) val); + break; + } + case HW_VAR_H2C_FW_JOINBSSRPT:{ + break; + } + case HW_VAR_AID:{ + break; + } + case HW_VAR_CORRECT_TSF:{ + break; + } + case HW_VAR_MRC: { + bool bmrc_toset = *((bool *)val); + u8 u1bdata = 0; + + if (bmrc_toset) { + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE0, 0x33); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM1_TRXPATHENABLE, + MASKBYTE0); + rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, + MASKBYTE0, + ((u1bdata & 0xf0) | 0x03)); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM0_TRXPATHENABLE, + MASKBYTE1); + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE1, + (u1bdata | 0x04)); + + /* Update current settings. */ + rtlpriv->dm.current_mrc_switch = bmrc_toset; + } else { + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE0, 0x13); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM1_TRXPATHENABLE, + MASKBYTE0); + rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, + MASKBYTE0, + ((u1bdata & 0xf0) | 0x01)); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM0_TRXPATHENABLE, + MASKBYTE1); + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE1, (u1bdata & 0xfb)); + + /* Update current settings. */ + rtlpriv->dm.current_mrc_switch = bmrc_toset; + } + + break; + } + case HW_VAR_FW_LPS_ACTION: { + bool enter_fwlps = *((bool *)val); + u8 rpwm_val, fw_pwrmode; + bool fw_current_inps; + + if (enter_fwlps) { + rpwm_val = 0x02; /* RF off */ + fw_current_inps = true; + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_FW_PSMODE_STATUS, + (u8 *)(&fw_current_inps)); + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_H2C_FW_PWRMODE, + &ppsc->fwctrl_psmode); + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, + &rpwm_val); + } else { + rpwm_val = 0x0C; /* RF on */ + fw_pwrmode = FW_PS_ACTIVE_MODE; + fw_current_inps = false; + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, + &rpwm_val); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE, + &fw_pwrmode); + + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_FW_PSMODE_STATUS, + (u8 *)(&fw_current_inps)); + } + break; } + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "switch case not processed\n"); + break; + } + +} + +void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 sec_reg_value = 0x0; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n", + rtlpriv->sec.pairwise_enc_algorithm, + rtlpriv->sec.group_enc_algorithm); + + if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + "not open hw encryption\n"); + return; + } + + sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE; + + if (rtlpriv->sec.use_defaultkey) { + sec_reg_value |= SCR_TXUSEDK; + sec_reg_value |= SCR_RXUSEDK; + } + + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n", + sec_reg_value); + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); + +} + +static u8 _rtl92se_halset_sysclk(struct ieee80211_hw *hw, u8 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 waitcount = 100; + bool bresult = false; + u8 tmpvalue; + + rtl_write_byte(rtlpriv, SYS_CLKR + 1, data); + + /* Wait the MAC synchronized. */ + udelay(400); + + /* Check if it is set ready. */ + tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + bresult = ((tmpvalue & BIT(7)) == (data & BIT(7))); + + if ((data & (BIT(6) | BIT(7))) == false) { + waitcount = 100; + tmpvalue = 0; + + while (1) { + waitcount--; + + tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + if ((tmpvalue & BIT(6))) + break; + + pr_err("wait for BIT(6) return value %x\n", tmpvalue); + if (waitcount == 0) + break; + + udelay(10); + } + + if (waitcount == 0) + bresult = false; + else + bresult = true; + } + + return bresult; +} + +void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 u1tmp; + + /* The following config GPIO function */ + rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO)); + u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL); + + /* config GPIO3 to input */ + u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK; + rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp); + +} + +static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 u1tmp; + u8 retval = ERFON; + + /* The following config GPIO function */ + rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO)); + u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL); + + /* config GPIO3 to input */ + u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK; + rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp); + + /* On some of the platform, driver cannot read correct + * value without delay between Write_GPIO_SEL and Read_GPIO_IN */ + mdelay(10); + + /* check GPIO3 */ + u1tmp = rtl_read_byte(rtlpriv, GPIO_IN_SE); + retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF; + + return retval; +} + +static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + u8 i; + u8 tmpu1b; + u16 tmpu2b; + u8 pollingcnt = 20; + + if (rtlpci->first_init) { + /* Reset PCIE Digital */ + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + tmpu1b &= 0xFE; + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b); + udelay(1); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0)); + } + + /* Switch to SW IO control */ + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + if (tmpu1b & BIT(7)) { + tmpu1b &= ~(BIT(6) | BIT(7)); + + /* Set failed, return to prevent hang. */ + if (!_rtl92se_halset_sysclk(hw, tmpu1b)) + return; + } + + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0); + udelay(50); + rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34); + udelay(50); + + /* Clear FW RPWM for FW control LPS.*/ + rtl_write_byte(rtlpriv, RPWM, 0x0); + + /* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */ + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + tmpu1b &= 0x73; + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b); + /* wait for BIT 10/11/15 to pull high automatically!! */ + mdelay(1); + + rtl_write_byte(rtlpriv, CMDR, 0); + rtl_write_byte(rtlpriv, TCR, 0); + + /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */ + tmpu1b = rtl_read_byte(rtlpriv, 0x562); + tmpu1b |= 0x08; + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + tmpu1b &= ~(BIT(3)); + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + + /* Enable AFE clock source */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01)); + /* Delay 1.5ms */ + mdelay(2); + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb)); + + /* Enable AFE Macro Block's Bandgap */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0))); + mdelay(1); + + /* Enable AFE Mbias */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02)); + mdelay(1); + + /* Enable LDOA15 block */ + tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL); + rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0))); + + /* Set Digital Vdd to Retention isolation Path. */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL); + rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11))); + + /* For warm reboot NIC disappera bug. */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13))); + + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68); + + /* Enable AFE PLL Macro Block */ + /* We need to delay 100u before enabling PLL. */ + udelay(200); + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4))); + + /* for divider reset */ + udelay(100); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | + BIT(4) | BIT(6))); + udelay(10); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4))); + udelay(10); + + /* Enable MAC 80MHZ clock */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0))); + mdelay(1); + + /* Release isolation AFE PLL & MD */ + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6); + + /* Enable MAC clock */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11))); + + /* Enable Core digital and enable IOREG R/W */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11))); + + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7))); + + /* enable REG_EN */ + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15))); + + /* Switch the control path. */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2)))); + + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6))); + if (!_rtl92se_halset_sysclk(hw, tmpu1b)) + return; /* Set failed, return to prevent hang. */ + + rtl_write_word(rtlpriv, CMDR, 0x07FC); + + /* MH We must enable the section of code to prevent load IMEM fail. */ + /* Load MAC register from WMAc temporarily We simulate macreg. */ + /* txt HW will provide MAC txt later */ + rtl_write_byte(rtlpriv, 0x6, 0x30); + rtl_write_byte(rtlpriv, 0x49, 0xf0); + + rtl_write_byte(rtlpriv, 0x4b, 0x81); + + rtl_write_byte(rtlpriv, 0xb5, 0x21); + + rtl_write_byte(rtlpriv, 0xdc, 0xff); + rtl_write_byte(rtlpriv, 0xdd, 0xff); + rtl_write_byte(rtlpriv, 0xde, 0xff); + rtl_write_byte(rtlpriv, 0xdf, 0xff); + + rtl_write_byte(rtlpriv, 0x11a, 0x00); + rtl_write_byte(rtlpriv, 0x11b, 0x00); + + for (i = 0; i < 32; i++) + rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b); + + rtl_write_byte(rtlpriv, 0x236, 0xff); + + rtl_write_byte(rtlpriv, 0x503, 0x22); + + if (ppsc->support_aspm && !ppsc->support_backdoor) + rtl_write_byte(rtlpriv, 0x560, 0x40); + else + rtl_write_byte(rtlpriv, 0x560, 0x00); + + rtl_write_byte(rtlpriv, DBG_PORT, 0x91); + + /* Set RX Desc Address */ + rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma); + rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma); + + /* Set TX Desc Address */ + rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma); + rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma); + rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma); + rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma); + rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma); + rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma); + rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma); + rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma); + rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma); + + rtl_write_word(rtlpriv, CMDR, 0x37FC); + + /* To make sure that TxDMA can ready to download FW. */ + /* We should reset TxDMA if IMEM RPT was not ready. */ + do { + tmpu1b = rtl_read_byte(rtlpriv, TCR); + if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE) + break; + + udelay(5); + } while (pollingcnt--); + + if (pollingcnt <= 0) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n", + tmpu1b); + tmpu1b = rtl_read_byte(rtlpriv, CMDR); + rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN)); + udelay(2); + /* Reset TxDMA */ + rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN); + } + + /* After MACIO reset,we must refresh LED state. */ + if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) || + (ppsc->rfoff_reason == 0)) { + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); + enum rf_pwrstate rfpwr_state_toset; + rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw); + + if (rfpwr_state_toset == ERFON) + rtl92se_sw_led_on(hw, pLed0); + } +} + +static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u8 i; + u16 tmpu2b; + + /* 1. System Configure Register (Offset: 0x0000 - 0x003F) */ + + /* 2. Command Control Register (Offset: 0x0040 - 0x004F) */ + /* Turn on 0x40 Command register */ + rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN | + SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN | + RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN)); + + /* Set TCR TX DMA pre 2 FULL enable bit */ + rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) | + TXDMAPRE2FULL); + + /* Set RCR */ + rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config); + + /* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */ + + /* 4. Timing Control Register (Offset: 0x0080 - 0x009F) */ + /* Set CCK/OFDM SIFS */ + /* CCK SIFS shall always be 10us. */ + rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a); + rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010); + + /* Set AckTimeout */ + rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40); + + /* Beacon related */ + rtl_write_word(rtlpriv, BCN_INTERVAL, 100); + rtl_write_word(rtlpriv, ATIMWND, 2); + + /* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */ + /* 5.1 Initialize Number of Reserved Pages in Firmware Queue */ + /* Firmware allocate now, associate with FW internal setting.!!! */ + + /* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */ + /* 5.3 Set driver info, we only accept PHY status now. */ + /* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO */ + rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6)); + + /* 6. Adaptive Control Register (Offset: 0x0160 - 0x01CF) */ + /* Set RRSR to all legacy rate and HT rate + * CCK rate is supported by default. + * CCK rate will be filtered out only when associated + * AP does not support it. + * Only enable ACK rate to OFDM 24M + * Disable RRSR for CCK rate in A-Cut */ + + if (rtlhal->version == VERSION_8192S_ACUT) + rtl_write_byte(rtlpriv, RRSR, 0xf0); + else if (rtlhal->version == VERSION_8192S_BCUT) + rtl_write_byte(rtlpriv, RRSR, 0xff); + rtl_write_byte(rtlpriv, RRSR + 1, 0x01); + rtl_write_byte(rtlpriv, RRSR + 2, 0x00); + + /* A-Cut IC do not support CCK rate. We forbid ARFR to */ + /* fallback to CCK rate */ + for (i = 0; i < 8; i++) { + /*Disable RRSR for CCK rate in A-Cut */ + if (rtlhal->version == VERSION_8192S_ACUT) + rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0); + } + + /* Different rate use different AMPDU size */ + /* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */ + rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f); + /* MCS0/1/2/3 use max AMPDU size 4*2=8K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442); + /* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7); + /* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772); + /* MCS12/13/14/15 use max AMPDU size 15*2=30K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd); + + /* Set Data / Response auto rate fallack retry count */ + rtl_write_dword(rtlpriv, DARFRC, 0x04010000); + rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605); + rtl_write_dword(rtlpriv, RARFRC, 0x04010000); + rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605); + + /* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */ + /* Set all rate to support SG */ + rtl_write_word(rtlpriv, SG_RATE, 0xFFFF); + + /* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */ + /* Set NAV protection length */ + rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080); + /* CF-END Threshold */ + rtl_write_byte(rtlpriv, CFEND_TH, 0xFF); + /* Set AMPDU minimum space */ + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07); + /* Set TXOP stall control for several queue/HI/BCN/MGT/ */ + rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00); + + /* 9. Security Control Register (Offset: 0x0240 - 0x025F) */ + /* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */ + /* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */ + /* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */ + /* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */ + + /* 14. Set driver info, we only accept PHY status now. */ + rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4); + + /* 15. For EEPROM R/W Workaround */ + /* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */ + tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13)); + tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL); + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8))); + + /* 17. For EFUSE */ + /* We may R/W EFUSE in EEPROM mode */ + if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { + u8 tempval; + + tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1); + tempval &= 0xFE; + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval); + + /* Change Program timing */ + rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72); + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "EFUSE CONFIG OK\n"); + } + + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "OK\n"); + +} + +static void _rtl92se_hw_configure(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + + u8 reg_bw_opmode = 0; + u32 reg_rrsr = 0; + u8 regtmp = 0; + + reg_bw_opmode = BW_OPMODE_20MHZ; + reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; + + regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL); + reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp; + rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr); + rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode); + + /* Set Retry Limit here */ + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT, + (u8 *)(&rtlpci->shortretry_limit)); + + rtl_write_byte(rtlpriv, MLT, 0x8f); + + /* For Min Spacing configuration. */ + switch (rtlphy->rf_type) { + case RF_1T2R: + case RF_1T1R: + rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); + break; + case RF_2T2R: + case RF_2T2R_GREEN: + rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); + break; + } + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg); +} + +int rtl92se_hw_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 tmp_byte = 0; + unsigned long flags; + bool rtstatus = true; + u8 tmp_u1b; + int err = false; + u8 i; + int wdcapra_add[] = { + EDCAPARA_BE, EDCAPARA_BK, + EDCAPARA_VI, EDCAPARA_VO}; + u8 secr_value = 0x0; + + rtlpci->being_init_adapter = true; + + /* As this function can take a very long time (up to 350 ms) + * and can be called with irqs disabled, reenable the irqs + * to let the other devices continue being serviced. + * + * It is safe doing so since our own interrupts will only be enabled + * in a subsequent step. + */ + local_save_flags(flags); + local_irq_enable(); + + rtlpriv->intf_ops->disable_aspm(hw); + + /* 1. MAC Initialize */ + /* Before FW download, we have to set some MAC register */ + _rtl92se_macconfig_before_fwdownload(hw); + + rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv, + PMC_FSM) >> 16) & 0xF); + + rtl8192se_gpiobit3_cfg_inputmode(hw); + + /* 2. download firmware */ + rtstatus = rtl92s_download_fw(hw); + if (!rtstatus) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + "Failed to download FW. Init HW without FW now... " + "Please copy FW into /lib/firmware/rtlwifi\n"); + err = 1; + goto exit; + } + + /* After FW download, we have to reset MAC register */ + _rtl92se_macconfig_after_fwdownload(hw); + + /*Retrieve default FW Cmd IO map. */ + rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, LBUS_MON_ADDR); + rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK); + + /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */ + if (!rtl92s_phy_mac_config(hw)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n"); + err = rtstatus; + goto exit; + } + + /* because last function modify RCR, so we update + * rcr var here, or TP will unstable for receive_config + * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx + * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252 + */ + rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR); + rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); + rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config); + + /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */ + /* We must set flag avoid BB/RF config period later!! */ + rtl_write_dword(rtlpriv, CMDR, 0x37FC); + + /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */ + if (!rtl92s_phy_bb_config(hw)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n"); + err = rtstatus; + goto exit; + } + + /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */ + /* Before initalizing RF. We can not use FW to do RF-R/W. */ + + rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; + + /* Before RF-R/W we must execute the IO from Scott's suggestion. */ + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB); + if (rtlhal->version == VERSION_8192S_ACUT) + rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07); + else + rtl_write_byte(rtlpriv, RF_CTRL, 0x07); + + if (!rtl92s_phy_rf_config(hw)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n"); + err = rtstatus; + goto exit; + } + + /* After read predefined TXT, we must set BB/MAC/RF + * register as our requirement */ + + rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw, + (enum radio_path)0, + RF_CHNLBW, + RFREG_OFFSET_MASK); + rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw, + (enum radio_path)1, + RF_CHNLBW, + RFREG_OFFSET_MASK); + + /*---- Set CCK and OFDM Block "ON"----*/ + rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); + rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); + + /*3 Set Hardware(Do nothing now) */ + _rtl92se_hw_configure(hw); + + /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ + /* TX power index for different rate set. */ + /* Get original hw reg values */ + rtl92s_phy_get_hw_reg_originalvalue(hw); + /* Write correct tx power index */ + rtl92s_phy_set_txpower(hw, rtlphy->current_channel); + + /* We must set MAC address after firmware download. */ + for (i = 0; i < 6; i++) + rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]); + + /* EEPROM R/W workaround */ + tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG); + rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3))); + + rtl_write_byte(rtlpriv, 0x4d, 0x0); + + if (hal_get_firmwareversion(rtlpriv) >= 0x49) { + tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4)); + tmp_byte = tmp_byte | BIT(5); + rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte); + rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF); + } + + /* We enable high power and RA related mechanism after NIC + * initialized. */ + if (hal_get_firmwareversion(rtlpriv) >= 0x35) { + /* Fw v.53 and later. */ + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT); + } else if (hal_get_firmwareversion(rtlpriv) == 0x34) { + /* Fw v.52. */ + rtl_write_dword(rtlpriv, WFM5, FW_RA_INIT); + rtl92s_phy_chk_fwcmd_iodone(hw); + } else { + /* Compatible earlier FW version. */ + rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET); + rtl92s_phy_chk_fwcmd_iodone(hw); + rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE); + rtl92s_phy_chk_fwcmd_iodone(hw); + rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH); + rtl92s_phy_chk_fwcmd_iodone(hw); + } + + /* Add to prevent ASPM bug. */ + /* Always enable hst and NIC clock request. */ + rtl92s_phy_switch_ephy_parameter(hw); + + /* Security related + * 1. Clear all H/W keys. + * 2. Enable H/W encryption/decryption. */ + rtl_cam_reset_all_entry(hw); + secr_value |= SCR_TXENCENABLE; + secr_value |= SCR_RXENCENABLE; + secr_value |= SCR_NOSKMC; + rtl_write_byte(rtlpriv, REG_SECR, secr_value); + + for (i = 0; i < 4; i++) + rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322); + + if (rtlphy->rf_type == RF_1T2R) { + bool mrc2set = true; + /* Turn on B-Path */ + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set); + } + + rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON); + rtl92s_dm_init(hw); +exit: + local_irq_restore(flags); + rtlpci->being_init_adapter = false; + return err; +} + +void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr) +{ + /* This is a stub. */ +} + +void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 reg_rcr; + + if (rtlpriv->psc.rfpwr_state != ERFON) + return; + + rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + + if (check_bssid) { + reg_rcr |= (RCR_CBSSID); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + } else if (!check_bssid) { + reg_rcr &= (~RCR_CBSSID); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + } + +} + +static int _rtl92se_set_media_status(struct ieee80211_hw *hw, + enum nl80211_iftype type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 bt_msr = rtl_read_byte(rtlpriv, MSR); + u32 temp; + bt_msr &= ~MSR_LINK_MASK; + + switch (type) { + case NL80211_IFTYPE_UNSPECIFIED: + bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + "Set Network type to NO LINK!\n"); + break; + case NL80211_IFTYPE_ADHOC: + bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + "Set Network type to Ad Hoc!\n"); + break; + case NL80211_IFTYPE_STATION: + bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + "Set Network type to STA!\n"); + break; + case NL80211_IFTYPE_AP: + bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + "Set Network type to AP!\n"); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "Network type %d not supported!\n", type); + return 1; + + } + + if (type != NL80211_IFTYPE_AP && + rtlpriv->mac80211.link_state < MAC80211_LINKED) + bt_msr = rtl_read_byte(rtlpriv, MSR) & ~MSR_LINK_MASK; + rtl_write_byte(rtlpriv, MSR, bt_msr); + + temp = rtl_read_dword(rtlpriv, TCR); + rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8))); + rtl_write_dword(rtlpriv, TCR, temp | BIT(8)); + + + return 0; +} + +/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */ +int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (_rtl92se_set_media_status(hw, type)) + return -EOPNOTSUPP; + + if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { + if (type != NL80211_IFTYPE_AP) + rtl92se_set_check_bssid(hw, true); + } else { + rtl92se_set_check_bssid(hw, false); + } + + return 0; +} + +/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */ +void rtl92se_set_qos(struct ieee80211_hw *hw, int aci) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + rtl92s_dm_init_edca_turbo(hw); + + switch (aci) { + case AC1_BK: + rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f); + break; + case AC0_BE: + /* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */ + break; + case AC2_VI: + rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322); + break; + case AC3_VO: + rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222); + break; + default: + RT_ASSERT(false, "invalid aci: %d !\n", aci); + break; + } +} + +void rtl92se_enable_interrupt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]); + /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */ + rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F); + rtlpci->irq_enabled = true; +} + +void rtl92se_disable_interrupt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv; + struct rtl_pci *rtlpci; + + rtlpriv = rtl_priv(hw); + /* if firmware not available, no interrupts */ + if (!rtlpriv || !rtlpriv->max_fw_size) + return; + rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + rtl_write_dword(rtlpriv, INTA_MASK, 0); + rtl_write_dword(rtlpriv, INTA_MASK + 4, 0); + rtlpci->irq_enabled = false; +} + +static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 waitcnt = 100; + bool result = false; + u8 tmp; + + rtl_write_byte(rtlpriv, SYS_CLKR + 1, data); + + /* Wait the MAC synchronized. */ + udelay(400); + + /* Check if it is set ready. */ + tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + result = ((tmp & BIT(7)) == (data & BIT(7))); + + if ((data & (BIT(6) | BIT(7))) == false) { + waitcnt = 100; + tmp = 0; + + while (1) { + waitcnt--; + tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + + if ((tmp & BIT(6))) + break; + + pr_err("wait for BIT(6) return value %x\n", tmp); + + if (waitcnt == 0) + break; + udelay(10); + } + + if (waitcnt == 0) + result = false; + else + result = true; + } + + return result; +} + +static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + u8 u1btmp; + + if (rtlhal->driver_going2unload) + rtl_write_byte(rtlpriv, 0x560, 0x0); + + /* Power save for BB/RF */ + u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL); + u1btmp |= BIT(0); + rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp); + rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0); + rtl_write_byte(rtlpriv, TXPAUSE, 0xFF); + rtl_write_word(rtlpriv, CMDR, 0x57FC); + udelay(100); + rtl_write_word(rtlpriv, CMDR, 0x77FC); + rtl_write_byte(rtlpriv, PHY_CCA, 0x0); + udelay(10); + rtl_write_word(rtlpriv, CMDR, 0x37FC); + udelay(10); + rtl_write_word(rtlpriv, CMDR, 0x77FC); + udelay(10); + rtl_write_word(rtlpriv, CMDR, 0x57FC); + rtl_write_word(rtlpriv, CMDR, 0x0000); + + if (rtlhal->driver_going2unload) { + u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1)); + u1btmp &= ~(BIT(0)); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp); + } + + u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + + /* Add description. After switch control path. register + * after page1 will be invisible. We can not do any IO + * for register>0x40. After resume&MACIO reset, we need + * to remember previous reg content. */ + if (u1btmp & BIT(7)) { + u1btmp &= ~(BIT(6) | BIT(7)); + if (!_rtl92s_set_sysclk(hw, u1btmp)) { + pr_err("Switch ctrl path fail\n"); + return; + } + } + + /* Power save for MAC */ + if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS && + !rtlhal->driver_going2unload) { + /* enable LED function */ + rtl_write_byte(rtlpriv, 0x03, 0xF9); + /* SW/HW radio off or halt adapter!! For example S3/S4 */ + } else { + /* LED function disable. Power range is about 8mA now. */ + /* if write 0xF1 disconnet_pci power + * ifconfig wlan0 down power are both high 35:70 */ + /* if write oxF9 disconnet_pci power + * ifconfig wlan0 down power are both low 12:45*/ + rtl_write_byte(rtlpriv, 0x03, 0xF9); + } + + rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x00); + rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E); + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + +} + +static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); + + if (rtlpci->up_first_time == 1) + return; + + if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS) + rtl92se_sw_led_on(hw, pLed0); + else + rtl92se_sw_led_off(hw, pLed0); +} + + +static void _rtl92se_power_domain_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u16 tmpu2b; + u8 tmpu1b; + + rtlpriv->psc.pwrdomain_protect = true; + + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + if (tmpu1b & BIT(7)) { + tmpu1b &= ~(BIT(6) | BIT(7)); + if (!_rtl92s_set_sysclk(hw, tmpu1b)) { + rtlpriv->psc.pwrdomain_protect = false; + return; + } + } + + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0); + rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34); + + /* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */ + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + + /* If IPS we need to turn LED on. So we not + * not disable BIT 3/7 of reg3. */ + if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW)) + tmpu1b &= 0xFB; + else + tmpu1b &= 0x73; + + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b); + /* wait for BIT 10/11/15 to pull high automatically!! */ + mdelay(1); + + rtl_write_byte(rtlpriv, CMDR, 0); + rtl_write_byte(rtlpriv, TCR, 0); + + /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */ + tmpu1b = rtl_read_byte(rtlpriv, 0x562); + tmpu1b |= 0x08; + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + tmpu1b &= ~(BIT(3)); + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + + /* Enable AFE clock source */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01)); + /* Delay 1.5ms */ + udelay(1500); + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb)); + + /* Enable AFE Macro Block's Bandgap */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0))); + mdelay(1); + + /* Enable AFE Mbias */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02)); + mdelay(1); + + /* Enable LDOA15 block */ + tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL); + rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0))); + + /* Set Digital Vdd to Retention isolation Path. */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL); + rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11))); + + + /* For warm reboot NIC disappera bug. */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13))); + + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68); + + /* Enable AFE PLL Macro Block */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4))); + /* Enable MAC 80MHZ clock */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0))); + mdelay(1); + + /* Release isolation AFE PLL & MD */ + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6); + + /* Enable MAC clock */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11))); + + /* Enable Core digital and enable IOREG R/W */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11))); + /* enable REG_EN */ + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15))); + + /* Switch the control path. */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2)))); + + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6))); + if (!_rtl92s_set_sysclk(hw, tmpu1b)) { + rtlpriv->psc.pwrdomain_protect = false; + return; + } + + rtl_write_word(rtlpriv, CMDR, 0x37FC); + + /* After MACIO reset,we must refresh LED state. */ + _rtl92se_gen_refreshledstate(hw); + + rtlpriv->psc.pwrdomain_protect = false; +} + +void rtl92se_card_disable(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + enum nl80211_iftype opmode; + u8 wait = 30; + + rtlpriv->intf_ops->enable_aspm(hw); + + if (rtlpci->driver_is_goingto_unload || + ppsc->rfoff_reason > RF_CHANGE_BY_PS) + rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); + + /* we should chnge GPIO to input mode + * this will drop away current about 25mA*/ + rtl8192se_gpiobit3_cfg_inputmode(hw); + + /* this is very important for ips power save */ + while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) { + if (rtlpriv->psc.pwrdomain_protect) + mdelay(20); + else + break; + } + + mac->link_state = MAC80211_NOLINK; + opmode = NL80211_IFTYPE_UNSPECIFIED; + _rtl92se_set_media_status(hw, opmode); + + _rtl92s_phy_set_rfhalt(hw); + udelay(100); +} + +void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta, + u32 *p_intb) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; + rtl_write_dword(rtlpriv, ISR, *p_inta); + + *p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1]; + rtl_write_dword(rtlpriv, ISR + 4, *p_intb); +} + +void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 bcntime_cfg = 0; + u16 bcn_cw = 6, bcn_ifs = 0xf; + u16 atim_window = 2; + + /* ATIM Window (in unit of TU). */ + rtl_write_word(rtlpriv, ATIMWND, atim_window); + + /* Beacon interval (in unit of TU). */ + rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval); + + /* DrvErlyInt (in unit of TU). (Time to send + * interrupt to notify driver to change + * beacon content) */ + rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4); + + /* BcnDMATIM(in unit of us). Indicates the + * time before TBTT to perform beacon queue DMA */ + rtl_write_word(rtlpriv, BCN_DMATIME, 256); + + /* Force beacon frame transmission even + * after receiving beacon frame from + * other ad hoc STA */ + rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100); + + /* Beacon Time Configuration */ + if (mac->opmode == NL80211_IFTYPE_ADHOC) + bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT); + + /* TODO: bcn_ifs may required to be changed on ASIC */ + bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS; + + /*for beacon changed */ + rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval); +} + +void rtl92se_set_beacon_interval(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 bcn_interval = mac->beacon_interval; + + /* Beacon interval (in unit of TU). */ + rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval); + /* 2008.10.24 added by tynli for beacon changed. */ + rtl92s_phy_set_beacon_hwreg(hw, bcn_interval); +} + +void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw, + u32 add_msr, u32 rm_msr) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n", + add_msr, rm_msr); + + if (add_msr) + rtlpci->irq_mask[0] |= add_msr; + + if (rm_msr) + rtlpci->irq_mask[0] &= (~rm_msr); + + rtl92se_disable_interrupt(hw); + rtl92se_enable_interrupt(hw); +} + +static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw) +{ + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u8 efuse_id; + + rtlhal->ic_class = IC_INFERIORITY_A; + + /* Only retrieving while using EFUSE. */ + if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) && + !rtlefuse->autoload_failflag) { + efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET); + + if (efuse_id == 0xfe) + rtlhal->ic_class = IC_INFERIORITY_B; + } +} + +static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u16 i, usvalue; + u16 eeprom_id; + u8 tempval; + u8 hwinfo[HWSET_MAX_SIZE_92S]; + u8 rf_path, index; + + if (rtlefuse->epromtype == EEPROM_93C46) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "RTL819X Not boot from eeprom, check it !!\n"); + } else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { + rtl_efuse_shadow_map_update(hw); + + memcpy((void *)hwinfo, (void *) + &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], + HWSET_MAX_SIZE_92S); + } + + RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP", + hwinfo, HWSET_MAX_SIZE_92S); + + eeprom_id = *((u16 *)&hwinfo[0]); + if (eeprom_id != RTL8190_EEPROM_ID) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + "EEPROM ID(%#x) is invalid!!\n", eeprom_id); + rtlefuse->autoload_failflag = true; + } else { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); + rtlefuse->autoload_failflag = false; + } + + if (rtlefuse->autoload_failflag) + return; + + _rtl8192se_get_IC_Inferiority(hw); + + /* Read IC Version && Channel Plan */ + /* VID, DID SE 0xA-D */ + rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID]; + rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID]; + rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID]; + rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID]; + rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION]; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROMId = 0x%4x\n", eeprom_id); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid); + + for (i = 0; i < 6; i += 2) { + usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i]; + *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; + } + + for (i = 0; i < 6; i++) + rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]); + + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr); + + /* Get Tx Power Level by Channel */ + /* Read Tx power of Channel 1 ~ 14 from EEPROM. */ + /* 92S suupport RF A & B */ + for (rf_path = 0; rf_path < 2; rf_path++) { + for (i = 0; i < 3; i++) { + /* Read CCK RF A & B Tx power */ + rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] = + hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i]; + + /* Read OFDM RF A & B Tx power for 1T */ + rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] = + hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i]; + + /* Read OFDM RF A & B Tx power for 2T */ + rtlefuse->eprom_chnl_txpwr_ht40_2sdf[rf_path][i] + = hwinfo[EEPROM_TXPOWERBASE + 12 + + rf_path * 3 + i]; + } + } + + for (rf_path = 0; rf_path < 2; rf_path++) + for (i = 0; i < 3; i++) + RTPRINT(rtlpriv, FINIT, INIT_EEPROM, + "RF(%d) EEPROM CCK Area(%d) = 0x%x\n", + rf_path, i, + rtlefuse->eeprom_chnlarea_txpwr_cck + [rf_path][i]); + for (rf_path = 0; rf_path < 2; rf_path++) + for (i = 0; i < 3; i++) + RTPRINT(rtlpriv, FINIT, INIT_EEPROM, + "RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n", + rf_path, i, + rtlefuse->eeprom_chnlarea_txpwr_ht40_1s + [rf_path][i]); + for (rf_path = 0; rf_path < 2; rf_path++) + for (i = 0; i < 3; i++) + RTPRINT(rtlpriv, FINIT, INIT_EEPROM, + "RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n", + rf_path, i, + rtlefuse->eprom_chnl_txpwr_ht40_2sdf + [rf_path][i]); + + for (rf_path = 0; rf_path < 2; rf_path++) { + + /* Assign dedicated channel tx power */ + for (i = 0; i < 14; i++) { + /* channel 1~3 use the same Tx Power Level. */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 1; + /* Channel 9-14 */ + else + index = 2; + + /* Record A & B CCK /OFDM - 1T/2T Channel area + * tx power */ + rtlefuse->txpwrlevel_cck[rf_path][i] = + rtlefuse->eeprom_chnlarea_txpwr_cck + [rf_path][index]; + rtlefuse->txpwrlevel_ht40_1s[rf_path][i] = + rtlefuse->eeprom_chnlarea_txpwr_ht40_1s + [rf_path][index]; + rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = + rtlefuse->eprom_chnl_txpwr_ht40_2sdf + [rf_path][index]; + } + + for (i = 0; i < 14; i++) { + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n", + rf_path, i, + rtlefuse->txpwrlevel_cck[rf_path][i], + rtlefuse->txpwrlevel_ht40_1s[rf_path][i], + rtlefuse->txpwrlevel_ht40_2s[rf_path][i]); + } + } + + for (rf_path = 0; rf_path < 2; rf_path++) { + for (i = 0; i < 3; i++) { + /* Read Power diff limit. */ + rtlefuse->eeprom_pwrgroup[rf_path][i] = + hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i]; + } + } + + for (rf_path = 0; rf_path < 2; rf_path++) { + /* Fill Pwr group */ + for (i = 0; i < 14; i++) { + /* Chanel 1-3 */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 1; + /* Channel 9-13 */ + else + index = 2; + + rtlefuse->pwrgroup_ht20[rf_path][i] = + (rtlefuse->eeprom_pwrgroup[rf_path][index] & + 0xf); + rtlefuse->pwrgroup_ht40[rf_path][i] = + ((rtlefuse->eeprom_pwrgroup[rf_path][index] & + 0xf0) >> 4); + + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF-%d pwrgroup_ht20[%d] = 0x%x\n", + rf_path, i, + rtlefuse->pwrgroup_ht20[rf_path][i]); + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF-%d pwrgroup_ht40[%d] = 0x%x\n", + rf_path, i, + rtlefuse->pwrgroup_ht40[rf_path][i]); + } + } + + for (i = 0; i < 14; i++) { + /* Read tx power difference between HT OFDM 20/40 MHZ */ + /* channel 1-3 */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 1; + /* Channel 9-14 */ + else + index = 2; + + tempval = hwinfo[EEPROM_TX_PWR_HT20_DIFF + index] & 0xff; + rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF); + rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] = + ((tempval >> 4) & 0xF); + + /* Read OFDM<->HT tx power diff */ + /* Channel 1-3 */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 0x11; + /* Channel 9-14 */ + else + index = 1; + + tempval = hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index] & 0xff; + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] = + (tempval & 0xF); + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] = + ((tempval >> 4) & 0xF); + + tempval = hwinfo[TX_PWR_SAFETY_CHK]; + rtlefuse->txpwr_safetyflag = (tempval & 0x01); + } + + rtlefuse->eeprom_regulatory = 0; + if (rtlefuse->eeprom_version >= 2) { + /* BIT(0)~2 */ + if (rtlefuse->eeprom_version >= 4) + rtlefuse->eeprom_regulatory = + (hwinfo[EEPROM_REGULATORY] & 0x7); + else /* BIT(0) */ + rtlefuse->eeprom_regulatory = + (hwinfo[EEPROM_REGULATORY] & 0x1); + } + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory); + + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", + i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]); + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", + i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]); + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", + i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]); + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "RF-B Legacy to HT40 Diff[%d] = 0x%x\n", + i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]); + + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag); + + /* Read RF-indication and Tx Power gain + * index diff of legacy to HT OFDM rate. */ + tempval = hwinfo[EEPROM_RFIND_POWERDIFF] & 0xff; + rtlefuse->eeprom_txpowerdiff = tempval; + rtlefuse->legacy_httxpowerdiff = + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0]; + + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff); + + /* Get TSSI value for each path. */ + usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A]; + rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8); + usvalue = hwinfo[EEPROM_TSSI_B]; + rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff); + + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TSSI_A = 0x%x, TSSI_B = 0x%x\n", + rtlefuse->eeprom_tssi[RF90_PATH_A], + rtlefuse->eeprom_tssi[RF90_PATH_B]); + + /* Read antenna tx power offset of B/C/D to A from EEPROM */ + /* and read ThermalMeter from EEPROM */ + tempval = hwinfo[EEPROM_THERMALMETER]; + rtlefuse->eeprom_thermalmeter = tempval; + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter); + + /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */ + rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f); + rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100; + + /* Read CrystalCap from EEPROM */ + tempval = hwinfo[EEPROM_CRYSTALCAP] >> 4; + rtlefuse->eeprom_crystalcap = tempval; + /* CrystalCap, BIT(12)~15 */ + rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap; + + /* Read IC Version && Channel Plan */ + /* Version ID, Channel plan */ + rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN]; + rtlefuse->txpwr_fromeprom = true; + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, + "EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan); + + /* Read Customer ID or Board Type!!! */ + tempval = hwinfo[EEPROM_BOARDTYPE]; + /* Change RF type definition */ + if (tempval == 0) + rtlphy->rf_type = RF_2T2R; + else if (tempval == 1) + rtlphy->rf_type = RF_1T2R; + else if (tempval == 2) + rtlphy->rf_type = RF_1T2R; + else if (tempval == 3) + rtlphy->rf_type = RF_1T1R; + + /* 1T2R but 1SS (1x1 receive combining) */ + rtlefuse->b1x1_recvcombine = false; + if (rtlphy->rf_type == RF_1T2R) { + tempval = rtl_read_byte(rtlpriv, 0x07); + if (!(tempval & BIT(0))) { + rtlefuse->b1x1_recvcombine = true; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + "RF_TYPE=1T2R but only 1SS\n"); + } + } + rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine; + rtlefuse->eeprom_oemid = *&hwinfo[EEPROM_CUSTOMID]; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x", + rtlefuse->eeprom_oemid); + + /* set channel paln to world wide 13 */ + rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13; +} + +void rtl92se_read_eeprom_info(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 tmp_u1b = 0; + + tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD); + + if (tmp_u1b & BIT(4)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n"); + rtlefuse->epromtype = EEPROM_93C46; + } else { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n"); + rtlefuse->epromtype = EEPROM_BOOT_EFUSE; + } + + if (tmp_u1b & BIT(5)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); + rtlefuse->autoload_failflag = false; + _rtl92se_read_adapter_info(hw); + } else { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n"); + rtlefuse->autoload_failflag = true; + } +} + +static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u32 ratr_value; + u8 ratr_index = 0; + u8 nmode = mac->ht_enable; + u8 mimo_ps = IEEE80211_SMPS_OFF; + u16 shortgi_rate = 0; + u32 tmp_ratr_value = 0; + u8 curtxbw_40mhz = mac->bw_40; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = mac->mode; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_value = sta->supp_rates[1] << 4; + else + ratr_value = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_value = 0xfff; + ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); + switch (wirelessmode) { + case WIRELESS_MODE_B: + ratr_value &= 0x0000000D; + break; + case WIRELESS_MODE_G: + ratr_value &= 0x00000FF5; + break; + case WIRELESS_MODE_N_24G: + case WIRELESS_MODE_N_5G: + nmode = 1; + if (mimo_ps == IEEE80211_SMPS_STATIC) { + ratr_value &= 0x0007F005; + } else { + u32 ratr_mask; + + if (get_rf_type(rtlphy) == RF_1T2R || + get_rf_type(rtlphy) == RF_1T1R) { + if (curtxbw_40mhz) + ratr_mask = 0x000ff015; + else + ratr_mask = 0x000ff005; + } else { + if (curtxbw_40mhz) + ratr_mask = 0x0f0ff015; + else + ratr_mask = 0x0f0ff005; + } + + ratr_value &= ratr_mask; + } + break; + default: + if (rtlphy->rf_type == RF_1T2R) + ratr_value &= 0x000ff0ff; + else + ratr_value &= 0x0f0ff0ff; + + break; + } + + if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT) + ratr_value &= 0x0FFFFFFF; + else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT) + ratr_value &= 0x0FFFFFF0; + + if (nmode && ((curtxbw_40mhz && + curshortgi_40mhz) || (!curtxbw_40mhz && + curshortgi_20mhz))) { + + ratr_value |= 0x10000000; + tmp_ratr_value = (ratr_value >> 12); + + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { + if ((1 << shortgi_rate) & tmp_ratr_value) + break; + } + + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | + (shortgi_rate << 4) | (shortgi_rate); + + rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate); + } + + rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value); + if (ratr_value & 0xfffff000) + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N); + else + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", + rtl_read_dword(rtlpriv, ARFR0)); +} + +static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_sta_info *sta_entry = NULL; + u32 ratr_bitmap; + u8 ratr_index = 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = 0; + bool shortgi = false; + u32 ratr_value = 0; + u8 shortgi_rate = 0; + u32 mask = 0; + u32 band = 0; + bool bmulticast = false; + u8 macid = 0; + u8 mimo_ps = IEEE80211_SMPS_OFF; + + sta_entry = (struct rtl_sta_info *) sta->drv_priv; + wirelessmode = sta_entry->wireless_mode; + if (mac->opmode == NL80211_IFTYPE_STATION) + curtxbw_40mhz = mac->bw_40; + else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) + macid = sta->aid + 1; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_bitmap = sta->supp_rates[1] << 4; + else + ratr_bitmap = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_bitmap = 0xfff; + ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); + switch (wirelessmode) { + case WIRELESS_MODE_B: + band |= WIRELESS_11B; + ratr_index = RATR_INX_WIRELESS_B; + if (ratr_bitmap & 0x0000000c) + ratr_bitmap &= 0x0000000d; + else + ratr_bitmap &= 0x0000000f; + break; + case WIRELESS_MODE_G: + band |= (WIRELESS_11G | WIRELESS_11B); + ratr_index = RATR_INX_WIRELESS_GB; + + if (rssi_level == 1) + ratr_bitmap &= 0x00000f00; + else if (rssi_level == 2) + ratr_bitmap &= 0x00000ff0; + else + ratr_bitmap &= 0x00000ff5; + break; + case WIRELESS_MODE_A: + band |= WIRELESS_11A; + ratr_index = RATR_INX_WIRELESS_A; + ratr_bitmap &= 0x00000ff0; + break; + case WIRELESS_MODE_N_24G: + case WIRELESS_MODE_N_5G: + band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B); + ratr_index = RATR_INX_WIRELESS_NGB; + + if (mimo_ps == IEEE80211_SMPS_STATIC) { + if (rssi_level == 1) + ratr_bitmap &= 0x00070000; + else if (rssi_level == 2) + ratr_bitmap &= 0x0007f000; + else + ratr_bitmap &= 0x0007f005; + } else { + if (rtlphy->rf_type == RF_1T2R || + rtlphy->rf_type == RF_1T1R) { + if (rssi_level == 1) { + ratr_bitmap &= 0x000f0000; + } else if (rssi_level == 3) { + ratr_bitmap &= 0x000fc000; + } else if (rssi_level == 5) { + ratr_bitmap &= 0x000ff000; + } else { + if (curtxbw_40mhz) + ratr_bitmap &= 0x000ff015; + else + ratr_bitmap &= 0x000ff005; + } + } else { + if (rssi_level == 1) { + ratr_bitmap &= 0x0f8f0000; + } else if (rssi_level == 3) { + ratr_bitmap &= 0x0f8fc000; + } else if (rssi_level == 5) { + ratr_bitmap &= 0x0f8ff000; + } else { + if (curtxbw_40mhz) + ratr_bitmap &= 0x0f8ff015; + else + ratr_bitmap &= 0x0f8ff005; + } + } + } + + if ((curtxbw_40mhz && curshortgi_40mhz) || + (!curtxbw_40mhz && curshortgi_20mhz)) { + if (macid == 0) + shortgi = true; + else if (macid == 1) + shortgi = false; + } + break; + default: + band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B); + ratr_index = RATR_INX_WIRELESS_NGB; + + if (rtlphy->rf_type == RF_1T2R) + ratr_bitmap &= 0x000ff0ff; + else + ratr_bitmap &= 0x0f8ff0ff; + break; + } + sta_entry->ratr_index = ratr_index; + + if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT) + ratr_bitmap &= 0x0FFFFFFF; + else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT) + ratr_bitmap &= 0x0FFFFFF0; + + if (shortgi) { + ratr_bitmap |= 0x10000000; + /* Get MAX MCS available. */ + ratr_value = (ratr_bitmap >> 12); + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { + if ((1 << shortgi_rate) & ratr_value) + break; + } + + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | + (shortgi_rate << 4) | (shortgi_rate); + rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate); + } + + mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, "mask = %x, bitmap = %x\n", + mask, ratr_bitmap); + rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap); + rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8))); + + if (macid != 0) + sta_entry->ratr_index = ratr_index; +} + +void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->dm.useramask) + rtl92se_update_hal_rate_mask(hw, sta, rssi_level); + else + rtl92se_update_hal_rate_table(hw, sta); +} + +void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 sifs_timer; + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, + &mac->slot_time); + sifs_timer = 0x0e0e; + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); + +} + +/* this ifunction is for RFKILL, it's different with windows, + * because UI will disable wireless when GPIO Radio Off. + * And here we not check or Disable/Enable ASPM like windows*/ +bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + enum rf_pwrstate rfpwr_toset /*, cur_rfstate */; + unsigned long flag = 0; + bool actuallyset = false; + bool turnonbypowerdomain = false; + + /* just 8191se can check gpio before firstup, 92c/92d have fixed it */ + if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter)) + return false; + + if (ppsc->swrf_processing) + return false; + + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + if (ppsc->rfchange_inprogress) { + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + return false; + } else { + ppsc->rfchange_inprogress = true; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } + + /* cur_rfstate = ppsc->rfpwr_state;*/ + + /* because after _rtl92s_phy_set_rfhalt, all power + * closed, so we must open some power for GPIO check, + * or we will always check GPIO RFOFF here, + * And we should close power after GPIO check */ + if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) { + _rtl92se_power_domain_init(hw); + turnonbypowerdomain = true; + } + + rfpwr_toset = _rtl92se_rf_onoff_detect(hw); + + if ((ppsc->hwradiooff) && (rfpwr_toset == ERFON)) { + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + "RFKILL-HW Radio ON, RF ON\n"); + + rfpwr_toset = ERFON; + ppsc->hwradiooff = false; + actuallyset = true; + } else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) { + RT_TRACE(rtlpriv, COMP_RF, + DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n"); + + rfpwr_toset = ERFOFF; + ppsc->hwradiooff = true; + actuallyset = true; + } + + if (actuallyset) { + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + ppsc->rfchange_inprogress = false; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + + /* this not include ifconfig wlan0 down case */ + /* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */ + } else { + /* because power_domain_init may be happen when + * _rtl92s_phy_set_rfhalt, this will open some powers + * and cause current increasing about 40 mA for ips, + * rfoff and ifconfig down, so we set + * _rtl92s_phy_set_rfhalt again here */ + if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC && + turnonbypowerdomain) { + _rtl92s_phy_set_rfhalt(hw); + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + } + + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + ppsc->rfchange_inprogress = false; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } + + *valid = 1; + return !ppsc->hwradiooff; + +} + +/* Is_wepkey just used for WEP used as group & pairwise key + * if pairwise is AES ang group is WEP Is_wepkey == false.*/ +void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr, + bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 *macaddr = p_macaddr; + + u32 entry_id = 0; + bool is_pairwise = false; + + static u8 cam_const_addr[4][6] = { + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x01}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x02}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} + }; + static u8 cam_const_broad[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + }; + + if (clear_all) { + u8 idx = 0; + u8 cam_offset = 0; + u8 clear_number = 5; + + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n"); + + for (idx = 0; idx < clear_number; idx++) { + rtl_cam_mark_invalid(hw, cam_offset + idx); + rtl_cam_empty_entry(hw, cam_offset + idx); + + if (idx < 5) { + memset(rtlpriv->sec.key_buf[idx], 0, + MAX_KEY_LEN); + rtlpriv->sec.key_len[idx] = 0; + } + } + + } else { + switch (enc_algo) { + case WEP40_ENCRYPTION: + enc_algo = CAM_WEP40; + break; + case WEP104_ENCRYPTION: + enc_algo = CAM_WEP104; + break; + case TKIP_ENCRYPTION: + enc_algo = CAM_TKIP; + break; + case AESCCMP_ENCRYPTION: + enc_algo = CAM_AES; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "switch case not processed\n"); + enc_algo = CAM_TKIP; + break; + } + + if (is_wepkey || rtlpriv->sec.use_defaultkey) { + macaddr = cam_const_addr[key_index]; + entry_id = key_index; + } else { + if (is_group) { + macaddr = cam_const_broad; + entry_id = key_index; + } else { + if (mac->opmode == NL80211_IFTYPE_AP) { + entry_id = rtl_cam_get_free_entry(hw, + p_macaddr); + if (entry_id >= TOTAL_CAM_ENTRY) { + RT_TRACE(rtlpriv, + COMP_SEC, DBG_EMERG, + "Can not find free hw security cam entry\n"); + return; + } + } else { + entry_id = CAM_PAIRWISE_KEY_POSITION; + } + + key_index = PAIRWISE_KEYIDX; + is_pairwise = true; + } + } + + if (rtlpriv->sec.key_len[key_index] == 0) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + "delete one entry, entry_id is %d\n", + entry_id); + if (mac->opmode == NL80211_IFTYPE_AP) + rtl_cam_del_entry(hw, p_macaddr); + rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); + } else { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + "add one entry\n"); + if (is_pairwise) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + "set Pairwise key\n"); + + rtl_cam_add_one_entry(hw, macaddr, key_index, + entry_id, enc_algo, + CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[key_index]); + } else { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + "set group key\n"); + + if (mac->opmode == NL80211_IFTYPE_ADHOC) { + rtl_cam_add_one_entry(hw, + rtlefuse->dev_addr, + PAIRWISE_KEYIDX, + CAM_PAIRWISE_KEY_POSITION, + enc_algo, CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[entry_id]); + } + + rtl_cam_add_one_entry(hw, macaddr, key_index, + entry_id, enc_algo, + CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[entry_id]); + } + + } + } +} + +void rtl92se_suspend(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtlpci->up_first_time = true; +} + +void rtl92se_resume(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u32 val; + + pci_read_config_dword(rtlpci->pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(rtlpci->pdev, 0x40, + val & 0xffff00ff); +} |