diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-csr.h')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-csr.h | 32 |
1 files changed, 22 insertions, 10 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 12725796ea5f..9d6e5d2072d2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -95,8 +95,7 @@ #define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) #define CSR_LED_REG (CSR_BASE+0x094) -/* Analog phase-lock-loop configuration (3945 only) - * Set bit 24. */ +/* Analog phase-lock-loop configuration */ #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) /* * Indicates hardware rev, to determine CCK backoff for txpower calculation. @@ -107,9 +106,9 @@ /* Bits for CSR_HW_IF_CONFIG_REG */ #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) -#define CSR49_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) -#define CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) -#define CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) +#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) +#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) +#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100) #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200) @@ -170,6 +169,10 @@ #define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ CSR_FH_INT_BIT_TX_CHNL0) +/* GPIO */ +#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) +#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) +#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) /* RESET */ #define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) @@ -191,6 +194,16 @@ #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) +/* HW REV */ +#define CSR_HW_REV_TYPE_MSK (0x00000F0) +#define CSR_HW_REV_TYPE_3945 (0x00000D0) +#define CSR_HW_REV_TYPE_4965 (0x0000000) +#define CSR_HW_REV_TYPE_5300 (0x0000020) +#define CSR_HW_REV_TYPE_5350 (0x0000030) +#define CSR_HW_REV_TYPE_5100 (0x0000050) +#define CSR_HW_REV_TYPE_5150 (0x0000040) +#define CSR_HW_REV_TYPE_NONE (0x00000F0) + /* EEPROM REG */ #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) #define CSR_EEPROM_REG_BIT_CMD (0x00000002) @@ -206,11 +219,6 @@ #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) -/* GPIO */ -#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) -#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) -#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC CSR_GPIO_IN_BIT_AUX_POWER - /* GI Chicken Bits */ #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) @@ -220,6 +228,10 @@ #define CSR_LED_REG_TRUN_ON (0x78) #define CSR_LED_REG_TRUN_OFF (0x38) +/* ANA_PLL */ +#define CSR39_ANA_PLL_CFG_VAL (0x01000000) +#define CSR50_ANA_PLL_CFG_VAL (0x00880300) + /*=== HBUS (Host-side Bus) ===*/ #define HBUS_BASE (0x400) /* |