1 files changed, 46 insertions, 98 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index e0678d921055..bde3b4cbab9d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
@@ -191,12 +192,12 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
+#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
 
 static const char *iwl3945_get_tx_fail_reason(u32 status)
 {
 	switch (status & TX_STATUS_MSK) {
-	case TX_STATUS_SUCCESS:
+	case TX_3945_STATUS_SUCCESS:
 		return "SUCCESS";
 		TX_STATUS_ENTRY(SHORT_LIMIT);
 		TX_STATUS_ENTRY(LONG_LIMIT);
@@ -242,7 +243,7 @@ int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
 			next_rate = IWL_RATE_6M_INDEX;
 		break;
 	case IEEE80211_BAND_2GHZ:
-		if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
+		if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
 		    iwl_is_associated(priv)) {
 			if (rate == IWL_RATE_11M_INDEX)
 				next_rate = IWL_RATE_5M_INDEX;
@@ -359,7 +360,7 @@ void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
 		     (int)sizeof(struct iwl3945_notif_statistics),
 		     le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
-	memcpy(&priv->statistics_39, pkt->u.raw, sizeof(priv->statistics_39));
+	memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
 }
 
 /******************************************************************************
@@ -486,7 +487,7 @@ static void _iwl3945_dbg_report_frame(struct iwl_priv *priv,
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
 			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
+				     "len=%u, rssi=%d, chnl=%d, rate=%d,\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, rate);
 		else {
@@ -548,7 +549,6 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 	u16 len = le16_to_cpu(rx_hdr->len);
 	struct sk_buff *skb;
-	int ret;
 	__le16 fc = hdr->frame_control;
 
 	/* We received data from the HW, so stop the watchdog */
@@ -565,9 +565,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
 		return;
 	}
 
-	skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC);
+	skb = dev_alloc_skb(128);
 	if (!skb) {
-		IWL_ERR(priv, "alloc_skb failed\n");
+		IWL_ERR(priv, "dev_alloc_skb failed\n");
 		return;
 	}
 
@@ -576,37 +576,13 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
 				       (struct ieee80211_hdr *)rxb_addr(rxb),
 				       le32_to_cpu(rx_end->status), stats);
 
-	skb_reserve(skb, IWL_LINK_HDR_MAX);
 	skb_add_rx_frag(skb, 0, rxb->page,
 			(void *)rx_hdr->payload - (void *)pkt, len);
 
-	/* mac80211 currently doesn't support paged SKB. Convert it to
-	 * linear SKB for management frame and data frame requires
-	 * software decryption or software defragementation. */
-	if (ieee80211_is_mgmt(fc) ||
-	    ieee80211_has_protected(fc) ||
-	    ieee80211_has_morefrags(fc) ||
-	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
-		ret = skb_linearize(skb);
-	else
-		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
-			0 : -ENOMEM;
-
-	if (ret) {
-		kfree_skb(skb);
-		goto out;
-	}
-
-	/*
-	 * XXX: We cannot touch the page and its virtual memory (pkt) after
-	 * here. It might have already been freed by the above skb change.
-	 */
-
 	iwl_update_stats(priv, false, fc, len);
 	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
 
 	ieee80211_rx(priv->hw, skb);
- out:
 	priv->alloc_rxb_page--;
 	rxb->page = NULL;
 }
@@ -622,9 +598,8 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 	struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
-	int snr;
-	u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg);
-	u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff);
+	u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
+	u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
 	u8 network_packet;
 
 	rx_status.flag = 0;
@@ -662,53 +637,29 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 	/* Convert 3945's rssi indicator to dBm */
 	rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
 
-	/* Set default noise value to -127 */
-	if (priv->last_rx_noise == 0)
-		priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-
-	/* 3945 provides noise info for OFDM frames only.
-	 * sig_avg and noise_diff are measured by the 3945's digital signal
-	 *   processor (DSP), and indicate linear levels of signal level and
-	 *   distortion/noise within the packet preamble after
-	 *   automatic gain control (AGC).  sig_avg should stay fairly
-	 *   constant if the radio's AGC is working well.
-	 * Since these values are linear (not dB or dBm), linear
-	 *   signal-to-noise ratio (SNR) is (sig_avg / noise_diff).
-	 * Convert linear SNR to dB SNR, then subtract that from rssi dBm
-	 *   to obtain noise level in dBm.
-	 * Calculate rx_status.signal (quality indicator in %) based on SNR. */
-	if (rx_stats_noise_diff) {
-		snr = rx_stats_sig_avg / rx_stats_noise_diff;
-		rx_status.noise = rx_status.signal -
-					iwl3945_calc_db_from_ratio(snr);
-	} else {
-		rx_status.noise = priv->last_rx_noise;
-	}
-
-
-	IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
-			rx_status.signal, rx_status.noise,
-			rx_stats_sig_avg, rx_stats_noise_diff);
+	IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
+			rx_status.signal, rx_stats_sig_avg,
+			rx_stats_noise_diff);
 
 	header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 
 	network_packet = iwl3945_is_network_packet(priv, header);
 
-	IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
+	IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
 			      network_packet ? '*' : ' ',
 			      le16_to_cpu(rx_hdr->channel),
 			      rx_status.signal, rx_status.signal,
-			      rx_status.noise, rx_status.rate_idx);
+			      rx_status.rate_idx);
 
 	/* Set "1" to report good data frames in groups of 100 */
 	iwl3945_dbg_report_frame(priv, pkt, header, 1);
 	iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
 
 	if (network_packet) {
-		priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
-		priv->last_tsf = le64_to_cpu(rx_end->timestamp);
-		priv->last_rx_rssi = rx_status.signal;
-		priv->last_rx_noise = rx_status.noise;
+		priv->_3945.last_beacon_time =
+			le32_to_cpu(rx_end->beacon_timestamp);
+		priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
+		priv->_3945.last_rx_rssi = rx_status.signal;
 	}
 
 	iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
@@ -956,7 +907,7 @@ static int iwl3945_tx_reset(struct iwl_priv *priv)
 	iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
 
 	iwl_write_direct32(priv, FH39_TSSR_CBB_BASE,
-			     priv->shared_phys);
+			     priv->_3945.shared_phys);
 
 	iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
 		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
@@ -1048,7 +999,7 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
 
 	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
-		IWL_DEBUG_INFO(priv, "RTP type \n");
+		IWL_DEBUG_INFO(priv, "RTP type\n");
 	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
 		IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
@@ -1606,7 +1557,7 @@ static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
 	int power;
 
 	/* Get this chnlgrp's rate-to-max/clip-powers table */
-	clip_pwrs = priv->clip39_groups[ch_info->group_index].clip_powers;
+	clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
 
 	/* Get this channel's rate-to-current-power settings table */
 	power_info = ch_info->power_info;
@@ -1732,7 +1683,7 @@ static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
 		}
 
 		/* Get this chnlgrp's rate-to-max/clip-powers table */
-		clip_pwrs = priv->clip39_groups[ch_info->group_index].clip_powers;
+		clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
 
 		/* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
 		for (scan_tbl_index = 0;
@@ -1910,6 +1861,8 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
 				  "configuration (%d).\n", rc);
 			return rc;
 		}
+		iwl_clear_ucode_stations(priv, false);
+		iwl_restore_stations(priv);
 	}
 
 	IWL_DEBUG_INFO(priv, "Sending RXON\n"
@@ -1940,7 +1893,10 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
 
 	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
 
-	iwl_clear_stations_table(priv);
+	if (!new_assoc) {
+		iwl_clear_ucode_stations(priv, false);
+		iwl_restore_stations(priv);
+	}
 
 	/* If we issue a new RXON command which required a tune then we must
 	 * send a new TXPOWER command or we won't be able to Tx any frames */
@@ -1950,19 +1906,6 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
 		return rc;
 	}
 
-	/* Add the broadcast address so we can send broadcast frames */
-	priv->cfg->ops->lib->add_bcast_station(priv);
-
-	/* If we have set the ASSOC_MSK and we are in BSS mode then
-	 * add the IWL_AP_ID to the station rate table */
-	if (iwl_is_associated(priv) &&
-	    (priv->iw_mode == NL80211_IFTYPE_STATION))
-		if (iwl_add_station(priv, priv->active_rxon.bssid_addr,
-				true, CMD_SYNC, NULL) == IWL_INVALID_STATION) {
-			IWL_ERR(priv, "Error adding AP address for transmit\n");
-			return -EIO;
-		}
-
 	/* Init the hardware's rate fallback order based on the band */
 	rc = iwl3945_init_hw_rate_table(priv);
 	if (rc) {
@@ -1997,13 +1940,13 @@ void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
 
  reschedule:
 	queue_delayed_work(priv->workqueue,
-			   &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ);
+			   &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
 }
 
 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
 {
 	struct iwl_priv *priv = container_of(work, struct iwl_priv,
-					     thermal_periodic.work);
+					     _3945.thermal_periodic.work);
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
@@ -2139,7 +2082,7 @@ static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
 		 *   power peaks, without too much distortion (clipping).
 		 */
 		/* we'll fill in this array with h/w max power levels */
-		clip_pwrs = (s8 *) priv->clip39_groups[i].clip_powers;
+		clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
 
 		/* divide factory saturation power by 2 to find -3dB level */
 		satur_pwr = (s8) (group->saturation_power >> 1);
@@ -2223,7 +2166,7 @@ int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
 			iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
 
 		/* Get this chnlgrp's rate->max/clip-powers table */
-		clip_pwrs = priv->clip39_groups[ch_info->group_index].clip_powers;
+		clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
 
 		/* calculate power index *adjustment* value according to
 		 *  diff between current temperature and factory temperature */
@@ -2331,7 +2274,7 @@ int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 {
 	int txq_id = txq->q.id;
 
-	struct iwl3945_shared *shared_data = priv->shared_virt;
+	struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
 
 	shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
 
@@ -2431,7 +2374,7 @@ int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
 		/* If an OFDM rate is used, have it fall back to the
 		 * 1M CCK rates */
 
-		if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
+		if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
 		    iwl_is_associated(priv)) {
 
 			index = IWL_FIRST_CCK_RATE;
@@ -2470,10 +2413,11 @@ int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
 	memset((void *)&priv->hw_params, 0,
 	       sizeof(struct iwl_hw_params));
 
-	priv->shared_virt = dma_alloc_coherent(&priv->pci_dev->dev,
-					       sizeof(struct iwl3945_shared),
-					       &priv->shared_phys, GFP_KERNEL);
-	if (!priv->shared_virt) {
+	priv->_3945.shared_virt =
+		dma_alloc_coherent(&priv->pci_dev->dev,
+				   sizeof(struct iwl3945_shared),
+				   &priv->_3945.shared_phys, GFP_KERNEL);
+	if (!priv->_3945.shared_virt) {
 		IWL_ERR(priv, "failed to allocate pci memory\n");
 		mutex_unlock(&priv->mutex);
 		return -ENOMEM;
@@ -2536,13 +2480,13 @@ void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
 
 void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
 {
-	INIT_DELAYED_WORK(&priv->thermal_periodic,
+	INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
 			  iwl3945_bg_reg_txpower_periodic);
 }
 
 void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
 {
-	cancel_delayed_work(&priv->thermal_periodic);
+	cancel_delayed_work(&priv->_3945.thermal_periodic);
 }
 
 /* check contents of special bootstrap uCode SRAM */
@@ -2826,6 +2770,8 @@ static struct iwl_cfg iwl3945_bg_cfg = {
 	.led_compensation = 64,
 	.broken_powersave = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.monitor_recover_period = IWL_MONITORING_PERIOD,
+	.max_event_log_size = 512,
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2844,6 +2790,8 @@ static struct iwl_cfg iwl3945_abg_cfg = {
 	.led_compensation = 64,
 	.broken_powersave = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.monitor_recover_period = IWL_MONITORING_PERIOD,
+	.max_event_log_size = 512,
 };
 
 DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {