summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43/main.c')
-rw-r--r--drivers/net/wireless/b43/main.c234
1 files changed, 142 insertions, 92 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index d74bc5ff8e13..cae31463ead9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -113,6 +113,16 @@ static int b43_modparam_pio = B43_PIO_DEFAULT;
module_param_named(pio, b43_modparam_pio, int, 0644);
MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
+#ifdef CONFIG_B43_BCMA
+static const struct bcma_device_id b43_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl);
+#endif
+
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
@@ -548,7 +558,7 @@ void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
{
u32 low, high;
- B43_WARN_ON(dev->sdev->id.revision < 3);
+ B43_WARN_ON(dev->dev->core_rev < 3);
/* The hardware guarantees us an atomic read, if we
* read the low register first. */
@@ -586,7 +596,7 @@ static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
{
u32 low, high;
- B43_WARN_ON(dev->sdev->id.revision < 3);
+ B43_WARN_ON(dev->dev->core_rev < 3);
low = tsf;
high = (tsf >> 32);
@@ -714,7 +724,7 @@ void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
b43_ram_write(dev, i * 4, buffer[i]);
b43_write16(dev, 0x0568, 0x0000);
- if (dev->sdev->id.revision < 11)
+ if (dev->dev->core_rev < 11)
b43_write16(dev, 0x07C0, 0x0000);
else
b43_write16(dev, 0x07C0, 0x0100);
@@ -1132,7 +1142,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
b43_write32(dev, B43_MMIO_MACCTL, macctl);
/* Commit write */
b43_read32(dev, B43_MMIO_MACCTL);
- if (awake && dev->sdev->id.revision >= 5) {
+ if (awake && dev->dev->core_rev >= 5) {
/* Wait for the microcode to wake up. */
for (i = 0; i < 100; i++) {
ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
@@ -1144,35 +1154,39 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
}
}
-static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
+static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
+ struct ssb_device *sdev = dev->dev->sdev;
u32 tmslow;
+ u32 flags = 0;
+ if (gmode)
+ flags |= B43_TMSLOW_GMODE;
flags |= B43_TMSLOW_PHYCLKEN;
flags |= B43_TMSLOW_PHYRESET;
if (dev->phy.type == B43_PHYTYPE_N)
flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */
- ssb_device_enable(dev->sdev, flags);
+ b43_device_enable(dev, flags);
msleep(2); /* Wait for the PLL to turn on. */
/* Now take the PHY out of Reset again */
- tmslow = ssb_read32(dev->sdev, SSB_TMSLOW);
+ tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmslow |= SSB_TMSLOW_FGC;
tmslow &= ~B43_TMSLOW_PHYRESET;
- ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
- ssb_read32(dev->sdev, SSB_TMSLOW); /* flush */
+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
+ ssb_read32(sdev, SSB_TMSLOW); /* flush */
msleep(1);
tmslow &= ~SSB_TMSLOW_FGC;
- ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
- ssb_read32(dev->sdev, SSB_TMSLOW); /* flush */
+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
+ ssb_read32(sdev, SSB_TMSLOW); /* flush */
msleep(1);
}
-void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
+void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
u32 macctl;
- b43_ssb_wireless_core_reset(dev, flags);
+ b43_ssb_wireless_core_reset(dev, gmode);
/* Turn Analog ON, but only if we already know the PHY-type.
* This protects against very early setup where we don't know the
@@ -1183,7 +1197,7 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
macctl = b43_read32(dev, B43_MMIO_MACCTL);
macctl &= ~B43_MACCTL_GMODE;
- if (flags & B43_TMSLOW_GMODE)
+ if (gmode)
macctl |= B43_MACCTL_GMODE;
macctl |= B43_MACCTL_IHR_ENABLED;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
@@ -1221,7 +1235,7 @@ static void drain_txstatus_queue(struct b43_wldev *dev)
{
u32 dummy;
- if (dev->sdev->id.revision < 5)
+ if (dev->dev->core_rev < 5)
return;
/* Read all entries from the microcode TXstatus FIFO
* and throw them away.
@@ -1427,9 +1441,9 @@ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
/* Get the mask of available antennas. */
if (dev->phy.gmode)
- antenna_mask = dev->sdev->bus->sprom.ant_available_bg;
+ antenna_mask = dev->dev->bus_sprom->ant_available_bg;
else
- antenna_mask = dev->sdev->bus->sprom.ant_available_a;
+ antenna_mask = dev->dev->bus_sprom->ant_available_a;
if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
/* This antenna is not available. Fall back to default. */
@@ -1644,7 +1658,7 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
/* wl->mutex is enough. */
b43_do_beacon_update_trigger_work(dev);
mmiowb();
@@ -1689,7 +1703,7 @@ static void b43_update_templates(struct b43_wl *wl)
static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
{
b43_time_lock(dev);
- if (dev->sdev->id.revision >= 3) {
+ if (dev->dev->core_rev >= 3) {
b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
} else {
@@ -2063,7 +2077,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
B43_WARN_ON(1);
return -ENOSYS;
}
- err = request_firmware(&blob, ctx->fwname, ctx->dev->sdev->dev);
+ err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev);
if (err == -ENOENT) {
snprintf(ctx->errors[ctx->req_type],
sizeof(ctx->errors[ctx->req_type]),
@@ -2113,7 +2127,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
{
struct b43_wldev *dev = ctx->dev;
struct b43_firmware *fw = &ctx->dev->fw;
- const u8 rev = ctx->dev->sdev->id.revision;
+ const u8 rev = ctx->dev->dev->core_rev;
const char *filename;
u32 tmshigh;
int err;
@@ -2157,7 +2171,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
switch (dev->phy.type) {
case B43_PHYTYPE_A:
if ((rev >= 5) && (rev <= 10)) {
- tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+ tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
filename = "a0g1initvals5";
else
@@ -2202,7 +2216,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
switch (dev->phy.type) {
case B43_PHYTYPE_A:
if ((rev >= 5) && (rev <= 10)) {
- tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+ tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
filename = "a0g1bsinitvals5";
else
@@ -2448,7 +2462,7 @@ static int b43_upload_microcode(struct b43_wldev *dev)
snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
dev->fw.rev, dev->fw.patch);
- wiphy->hw_version = dev->sdev->id.coreid;
+ wiphy->hw_version = dev->dev->core_id;
if (b43_is_old_txhdr_format(dev)) {
/* We're over the deadline, but we keep support for old fw
@@ -2566,7 +2580,7 @@ out:
*/
static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
#ifdef CONFIG_SSB_DRIVER_PCICORE
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
@@ -2588,7 +2602,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
mask = 0x0000001F;
set = 0x0000000F;
- if (dev->sdev->bus->chip_id == 0x4301) {
+ if (dev->dev->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
}
@@ -2599,14 +2613,14 @@ static int b43_gpio_init(struct b43_wldev *dev)
mask |= 0x0180;
set |= 0x0180;
}
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0200);
mask |= 0x0200;
set |= 0x0200;
}
- if (dev->sdev->id.revision >= 2)
+ if (dev->dev->core_rev >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
gpiodev = b43_ssb_gpio_dev(dev);
@@ -2741,15 +2755,15 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
/* Workaround: On old hardware the HW-MAC-address-filter
* doesn't work properly, so always run promisc in filter
* it in software. */
- if (dev->sdev->id.revision <= 4)
+ if (dev->dev->core_rev <= 4)
ctl |= B43_MACCTL_PROMISC;
b43_write32(dev, B43_MMIO_MACCTL, ctl);
cfp_pretbtt = 2;
if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
- if (dev->sdev->bus->chip_id == 0x4306 &&
- dev->sdev->bus->chip_rev == 3)
+ if (dev->dev->chip_id == 0x4306 &&
+ dev->dev->chip_rev == 3)
cfp_pretbtt = 100;
else
cfp_pretbtt = 50;
@@ -2907,7 +2921,7 @@ static int b43_chip_init(struct b43_wldev *dev)
b43_write16(dev, 0x005E, value16);
}
b43_write32(dev, 0x0100, 0x01000000);
- if (dev->sdev->id.revision < 5)
+ if (dev->dev->core_rev < 5)
b43_write32(dev, 0x010C, 0x01000000);
b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
@@ -2922,7 +2936,7 @@ static int b43_chip_init(struct b43_wldev *dev)
/* Initially set the wireless operation mode. */
b43_adjust_opmode(dev);
- if (dev->sdev->id.revision < 3) {
+ if (dev->dev->core_rev < 3) {
b43_write16(dev, 0x060E, 0x0000);
b43_write16(dev, 0x0610, 0x8000);
b43_write16(dev, 0x0604, 0x0000);
@@ -3105,7 +3119,7 @@ static int b43_validate_chipaccess(struct b43_wldev *dev)
b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);
- if ((dev->sdev->id.revision >= 3) && (dev->sdev->id.revision <= 10)) {
+ if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) {
/* The 32bit register shadows the two 16bit registers
* with update sideeffects. Validate this. */
b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
@@ -3954,7 +3968,7 @@ redo:
/* Disable interrupts on the device. */
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
/* wl->mutex is locked. That is enough. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
@@ -3967,11 +3981,11 @@ redo:
/* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
orig_dev = dev;
mutex_unlock(&wl->mutex);
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
b43_sdio_free_irq(dev);
} else {
- synchronize_irq(dev->sdev->irq);
- free_irq(dev->sdev->irq, dev);
+ synchronize_irq(dev->dev->irq);
+ free_irq(dev->dev->irq, dev);
}
mutex_lock(&wl->mutex);
dev = wl->current_dev;
@@ -4004,19 +4018,19 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
drain_txstatus_queue(dev);
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
if (err) {
b43err(dev->wl, "Cannot request SDIO IRQ\n");
goto out;
}
} else {
- err = request_threaded_irq(dev->sdev->irq, b43_interrupt_handler,
+ err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
b43_interrupt_thread_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
b43err(dev->wl, "Cannot request IRQ-%d\n",
- dev->sdev->irq);
+ dev->dev->irq);
goto out;
}
}
@@ -4096,10 +4110,10 @@ static int b43_phy_versioning(struct b43_wldev *dev)
analog_type, phy_type, phy_rev);
/* Get RADIO versioning */
- if (dev->sdev->bus->chip_id == 0x4317) {
- if (dev->sdev->bus->chip_rev == 0)
+ if (dev->dev->chip_id == 0x4317) {
+ if (dev->dev->chip_rev == 0)
tmp = 0x3205017F;
- else if (dev->sdev->bus->chip_rev == 1)
+ else if (dev->dev->chip_rev == 1)
tmp = 0x4205017F;
else
tmp = 0x5205017F;
@@ -4204,7 +4218,7 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev)
static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
{
- struct ssb_sprom *sprom = &dev->sdev->bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
u64 hf;
if (!modparam_btcoex)
@@ -4231,16 +4245,21 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus;
u32 tmp;
+ if (dev->dev->bus_type != B43_BUS_SSB)
+ return;
+
+ bus = dev->dev->sdev->bus;
+
if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
(bus->chip_id == 0x4312)) {
- tmp = ssb_read32(dev->sdev, SSB_IMCFGLO);
+ tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO);
tmp &= ~SSB_IMCFGLO_REQTO;
tmp &= ~SSB_IMCFGLO_SERTO;
tmp |= 0x3;
- ssb_write32(dev->sdev, SSB_IMCFGLO, tmp);
+ ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp);
ssb_commit_settings(bus);
}
}
@@ -4310,29 +4329,26 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
dev->wl->current_beacon = NULL;
}
- ssb_device_disable(dev->sdev, 0);
- ssb_bus_may_powerdown(dev->sdev->bus);
+ b43_device_disable(dev, 0);
+ b43_bus_may_powerdown(dev);
}
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
- struct ssb_sprom *sprom = &bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
int err;
u64 hf;
- u32 tmp;
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
- err = ssb_bus_powerup(bus, 0);
+ err = b43_bus_powerup(dev, 0);
if (err)
goto out;
- if (!ssb_device_is_enabled(dev->sdev)) {
- tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
- b43_wireless_core_reset(dev, tmp);
- }
+ if (!b43_device_is_enabled(dev))
+ b43_wireless_core_reset(dev, phy->gmode);
/* Reset all data structures. */
setup_struct_wldev_for_init(dev);
@@ -4352,7 +4368,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
if (err)
goto err_busdown;
b43_shm_write16(dev, B43_SHM_SHARED,
- B43_SHM_SH_WLCOREREV, dev->sdev->id.revision);
+ B43_SHM_SH_WLCOREREV, dev->dev->core_rev);
hf = b43_hf_read(dev);
if (phy->type == B43_PHYTYPE_G) {
hf |= B43_HF_SYMW;
@@ -4399,8 +4415,8 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
/* Maximum Contention Window */
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
- if ((dev->sdev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
- (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) ||
+ if (b43_bus_host_is_pcmcia(dev->dev) ||
+ b43_bus_host_is_sdio(dev->dev) ||
dev->use_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
@@ -4414,7 +4430,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
b43_set_synth_pu_delay(dev, 1);
b43_bluetooth_coext_enable(dev);
- ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
+ b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
@@ -4431,7 +4447,7 @@ out:
err_chip_exit:
b43_chip_exit(dev);
err_busdown:
- ssb_bus_may_powerdown(bus);
+ b43_bus_may_powerdown(dev);
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
return err;
}
@@ -4741,7 +4757,6 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
int err;
bool have_2ghz_phy = 0, have_5ghz_phy = 0;
- u32 tmp;
/* Do NOT do any device initialization here.
* Do it in wireless_core_init() instead.
@@ -4750,13 +4765,13 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
* that in core_init(), too.
*/
- err = ssb_bus_powerup(bus, 0);
+ err = b43_bus_powerup(dev, 0);
if (err) {
b43err(wl, "Bus powerup failed\n");
goto out;
}
/* Get the PHY type. */
- if (dev->sdev->id.revision >= 5) {
+ if (dev->dev->core_rev >= 5) {
u32 tmshigh;
tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
@@ -4767,8 +4782,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
dev->phy.gmode = have_2ghz_phy;
dev->phy.radio_on = 1;
- tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
- b43_wireless_core_reset(dev, tmp);
+ b43_wireless_core_reset(dev, dev->phy.gmode);
err = b43_phy_versioning(dev);
if (err)
@@ -4816,8 +4830,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
goto err_powerdown;
dev->phy.gmode = have_2ghz_phy;
- tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
- b43_wireless_core_reset(dev, tmp);
+ b43_wireless_core_reset(dev, dev->phy.gmode);
err = b43_validate_chipaccess(dev);
if (err)
@@ -4832,8 +4845,8 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
INIT_WORK(&dev->restart_work, b43_chip_reset);
dev->phy.ops->switch_analog(dev, 0);
- ssb_device_disable(dev->sdev, 0);
- ssb_bus_may_powerdown(bus);
+ b43_device_disable(dev, 0);
+ b43_bus_may_powerdown(dev);
out:
return err;
@@ -4841,11 +4854,11 @@ out:
err_phy_free:
b43_phy_free(dev);
err_powerdown:
- ssb_bus_may_powerdown(bus);
+ b43_bus_may_powerdown(dev);
return err;
}
-static void b43_one_core_detach(struct ssb_device *dev)
+static void b43_one_core_detach(struct b43_bus_dev *dev)
{
struct b43_wldev *wldev;
struct b43_wl *wl;
@@ -4853,17 +4866,17 @@ static void b43_one_core_detach(struct ssb_device *dev)
/* Do not cancel ieee80211-workqueue based work here.
* See comment in b43_remove(). */
- wldev = ssb_get_drvdata(dev);
+ wldev = ssb_get_drvdata(dev->sdev);
wl = wldev->wl;
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
wl->nr_devs--;
- ssb_set_drvdata(dev, NULL);
+ ssb_set_drvdata(dev->sdev, NULL);
kfree(wldev);
}
-static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
+static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl)
{
struct b43_wldev *wldev;
int err = -ENOMEM;
@@ -4873,7 +4886,8 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
goto out;
wldev->use_pio = b43_modparam_pio;
- wldev->sdev = dev;
+ wldev->dev = dev;
+ wldev->sdev = dev->sdev; /* TODO: Remove when not needed */
wldev->wl = wl;
b43_set_status(wldev, B43_STAT_UNINIT);
wldev->bad_frames_preempt = modparam_bad_frames_preempt;
@@ -4885,7 +4899,7 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
list_add(&wldev->list, &wl->devlist);
wl->nr_devs++;
- ssb_set_drvdata(dev, wldev);
+ ssb_set_drvdata(dev->sdev, wldev);
b43_debugfs_add_device(wldev);
out:
@@ -4926,11 +4940,11 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
}
}
-static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
+static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl)
{
struct ieee80211_hw *hw = wl->hw;
- ssb_set_devtypedata(dev, NULL);
+ ssb_set_devtypedata(dev->sdev, NULL);
ieee80211_free_hw(hw);
}
@@ -4982,24 +4996,48 @@ static struct b43_wl *b43_wireless_init(struct ssb_device *dev)
return wl;
}
-static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
+#ifdef CONFIG_B43_BCMA
+static int b43_bcma_probe(struct bcma_device *core)
+{
+ b43err(NULL, "BCMA is not supported yet!");
+ return -EOPNOTSUPP;
+}
+
+static void b43_bcma_remove(struct bcma_device *core)
+{
+ /* TODO */
+}
+
+static struct bcma_driver b43_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = b43_bcma_tbl,
+ .probe = b43_bcma_probe,
+ .remove = b43_bcma_remove,
+};
+#endif
+
+static
+int b43_ssb_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
{
+ struct b43_bus_dev *dev;
struct b43_wl *wl;
int err;
int first = 0;
- wl = ssb_get_devtypedata(dev);
+ dev = b43_bus_dev_ssb_init(sdev);
+
+ wl = ssb_get_devtypedata(sdev);
if (!wl) {
/* Probing the first core. Must setup common struct b43_wl */
first = 1;
- b43_sprom_fixup(dev->bus);
- wl = b43_wireless_init(dev);
+ b43_sprom_fixup(sdev->bus);
+ wl = b43_wireless_init(sdev);
if (IS_ERR(wl)) {
err = PTR_ERR(wl);
goto out;
}
- ssb_set_devtypedata(dev, wl);
- B43_WARN_ON(ssb_get_devtypedata(dev) != wl);
+ ssb_set_devtypedata(sdev, wl);
+ B43_WARN_ON(ssb_get_devtypedata(sdev) != wl);
}
err = b43_one_core_attach(dev, wl);
if (err)
@@ -5023,10 +5061,10 @@ static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
return err;
}
-static void b43_ssb_remove(struct ssb_device *dev)
+static void b43_ssb_remove(struct ssb_device *sdev)
{
- struct b43_wl *wl = ssb_get_devtypedata(dev);
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ struct b43_wl *wl = ssb_get_devtypedata(sdev);
+ struct b43_wldev *wldev = ssb_get_drvdata(sdev);
/* We must cancel any work here before unregistering from ieee80211,
* as the ieee80211 unreg will destroy the workqueue. */
@@ -5042,14 +5080,14 @@ static void b43_ssb_remove(struct ssb_device *dev)
ieee80211_unregister_hw(wl->hw);
}
- b43_one_core_detach(dev);
+ b43_one_core_detach(wldev->dev);
if (list_empty(&wl->devlist)) {
b43_leds_unregister(wl);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/
- b43_wireless_exit(dev, wl);
+ b43_wireless_exit(wldev->dev, wl);
}
}
@@ -5108,14 +5146,23 @@ static int __init b43_init(void)
err = b43_sdio_init();
if (err)
goto err_pcmcia_exit;
- err = ssb_driver_register(&b43_ssb_driver);
+#ifdef CONFIG_B43_BCMA
+ err = bcma_driver_register(&b43_bcma_driver);
if (err)
goto err_sdio_exit;
+#endif
+ err = ssb_driver_register(&b43_ssb_driver);
+ if (err)
+ goto err_bcma_driver_exit;
b43_print_driverinfo();
return err;
+err_bcma_driver_exit:
+#ifdef CONFIG_B43_BCMA
+ bcma_driver_unregister(&b43_bcma_driver);
err_sdio_exit:
+#endif
b43_sdio_exit();
err_pcmcia_exit:
b43_pcmcia_exit();
@@ -5127,6 +5174,9 @@ err_dfs_exit:
static void __exit b43_exit(void)
{
ssb_driver_unregister(&b43_ssb_driver);
+#ifdef CONFIG_B43_BCMA
+ bcma_driver_unregister(&b43_bcma_driver);
+#endif
b43_sdio_exit();
b43_pcmcia_exit();
b43_debugfs_exit();