diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/phy.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/phy.c | 978 |
1 files changed, 0 insertions, 978 deletions
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c deleted file mode 100644 index 2547b3c4a26c..000000000000 --- a/drivers/net/wireless/ath/ath9k/phy.c +++ /dev/null @@ -1,978 +0,0 @@ -/* - * Copyright (c) 2008-2009 Atheros Communications Inc. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -/** - * DOC: Programming Atheros 802.11n analog front end radios - * - * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express - * devices have either an external AR2133 analog front end radio for single - * band 2.4 GHz communication or an AR5133 analog front end radio for dual - * band 2.4 GHz / 5 GHz communication. - * - * All devices after the AR5416 and AR5418 family starting with the AR9280 - * have their analog front radios, MAC/BB and host PCIe/USB interface embedded - * into a single-chip and require less programming. - * - * The following single-chips exist with a respective embedded radio: - * - * AR9280 - 11n dual-band 2x2 MIMO for PCIe - * AR9281 - 11n single-band 1x2 MIMO for PCIe - * AR9285 - 11n single-band 1x1 for PCIe - * AR9287 - 11n single-band 2x2 MIMO for PCIe - * - * AR9220 - 11n dual-band 2x2 MIMO for PCI - * AR9223 - 11n single-band 2x2 MIMO for PCI - * - * AR9287 - 11n single-band 1x1 MIMO for USB - */ - -#include <linux/slab.h> - -#include "hw.h" - -/** - * ath9k_hw_write_regs - ?? - * - * @ah: atheros hardware structure - * @freqIndex: - * @regWrites: - * - * Used for both the chipsets with an external AR2133/AR5133 radios and - * single-chip devices. - */ -void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites) -{ - REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites); -} - -/** - * ath9k_hw_ar9280_set_channel - set channel on single-chip device - * @ah: atheros hardware structure - * @chan: - * - * This is the function to change channel on single-chip devices, that is - * all devices after ar9280. - * - * This function takes the channel value in MHz and sets - * hardware channel value. Assumes writes have been enabled to analog bus. - * - * Actual Expression, - * - * For 2GHz channel, - * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) - * (freq_ref = 40MHz) - * - * For 5GHz channel, - * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) - * (freq_ref = 40MHz/(24>>amodeRefSel)) - */ -int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) -{ - u16 bMode, fracMode, aModeRefSel = 0; - u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0; - struct chan_centers centers; - u32 refDivA = 24; - - ath9k_hw_get_channel_centers(ah, chan, ¢ers); - freq = centers.synth_center; - - reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL); - reg32 &= 0xc0000000; - - if (freq < 4800) { /* 2 GHz, fractional mode */ - u32 txctl; - int regWrites = 0; - - bMode = 1; - fracMode = 1; - aModeRefSel = 0; - channelSel = (freq * 0x10000) / 15; - - if (AR_SREV_9287_11_OR_LATER(ah)) { - if (freq == 2484) { - /* Enable channel spreading for channel 14 */ - REG_WRITE_ARRAY(&ah->iniCckfirJapan2484, - 1, regWrites); - } else { - REG_WRITE_ARRAY(&ah->iniCckfirNormal, - 1, regWrites); - } - } else { - txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); - if (freq == 2484) { - /* Enable channel spreading for channel 14 */ - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl | AR_PHY_CCK_TX_CTRL_JAPAN); - } else { - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN); - } - } - } else { - bMode = 0; - fracMode = 0; - - switch(ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) { - case 0: - if ((freq % 20) == 0) { - aModeRefSel = 3; - } else if ((freq % 10) == 0) { - aModeRefSel = 2; - } - if (aModeRefSel) - break; - case 1: - default: - aModeRefSel = 0; - /* - * Enable 2G (fractional) mode for channels - * which are 5MHz spaced. - */ - fracMode = 1; - refDivA = 1; - channelSel = (freq * 0x8000) / 15; - - /* RefDivA setting */ - REG_RMW_FIELD(ah, AR_AN_SYNTH9, - AR_AN_SYNTH9_REFDIVA, refDivA); - - } - - if (!fracMode) { - ndiv = (freq * (refDivA >> aModeRefSel)) / 60; - channelSel = ndiv & 0x1ff; - channelFrac = (ndiv & 0xfffffe00) * 2; - channelSel = (channelSel << 17) | channelFrac; - } - } - - reg32 = reg32 | - (bMode << 29) | - (fracMode << 28) | (aModeRefSel << 26) | (channelSel); - - REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32); - - ah->curchan = chan; - ah->curchan_rad_index = -1; - - return 0; -} - -/** - * ath9k_hw_9280_spur_mitigate - convert baseband spur frequency - * @ah: atheros hardware structure - * @chan: - * - * For single-chip solutions. Converts to baseband spur frequency given the - * input channel frequency and compute register settings below. - */ -void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int bb_spur = AR_NO_SPUR; - int freq; - int bin, cur_bin; - int bb_spur_off, spur_subchannel_sd; - int spur_freq_sd; - int spur_delta_phase; - int denominator; - int upper, lower, cur_vit_mask; - int tmp, newVal; - int i; - int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, - AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 - }; - int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, - AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 - }; - int inc[4] = { 0, 100, 0, 0 }; - struct chan_centers centers; - - int8_t mask_m[123]; - int8_t mask_p[123]; - int8_t mask_amt; - int tmp_mask; - int cur_bb_spur; - bool is2GHz = IS_CHAN_2GHZ(chan); - - memset(&mask_m, 0, sizeof(int8_t) * 123); - memset(&mask_p, 0, sizeof(int8_t) * 123); - - ath9k_hw_get_channel_centers(ah, chan, ¢ers); - freq = centers.synth_center; - - ah->config.spurmode = SPUR_ENABLE_EEPROM; - for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { - cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); - - if (is2GHz) - cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; - else - cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; - - if (AR_NO_SPUR == cur_bb_spur) - break; - cur_bb_spur = cur_bb_spur - freq; - - if (IS_CHAN_HT40(chan)) { - if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && - (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { - bb_spur = cur_bb_spur; - break; - } - } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && - (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { - bb_spur = cur_bb_spur; - break; - } - } - - if (AR_NO_SPUR == bb_spur) { - REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, - AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); - return; - } else { - REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, - AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); - } - - bin = bb_spur * 320; - - tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); - - newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | - AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | - AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | - AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); - REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); - - newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | - AR_PHY_SPUR_REG_ENABLE_MASK_PPM | - AR_PHY_SPUR_REG_MASK_RATE_SELECT | - AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | - SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); - REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); - - if (IS_CHAN_HT40(chan)) { - if (bb_spur < 0) { - spur_subchannel_sd = 1; - bb_spur_off = bb_spur + 10; - } else { - spur_subchannel_sd = 0; - bb_spur_off = bb_spur - 10; - } - } else { - spur_subchannel_sd = 0; - bb_spur_off = bb_spur; - } - - if (IS_CHAN_HT40(chan)) - spur_delta_phase = - ((bb_spur * 262144) / - 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; - else - spur_delta_phase = - ((bb_spur * 524288) / - 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; - - denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; - spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; - - newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | - SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | - SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); - REG_WRITE(ah, AR_PHY_TIMING11, newVal); - - newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; - REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); - - cur_bin = -6000; - upper = bin + 100; - lower = bin - 100; - - for (i = 0; i < 4; i++) { - int pilot_mask = 0; - int chan_mask = 0; - int bp = 0; - for (bp = 0; bp < 30; bp++) { - if ((cur_bin > lower) && (cur_bin < upper)) { - pilot_mask = pilot_mask | 0x1 << bp; - chan_mask = chan_mask | 0x1 << bp; - } - cur_bin += 100; - } - cur_bin += inc[i]; - REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); - REG_WRITE(ah, chan_mask_reg[i], chan_mask); - } - - cur_vit_mask = 6100; - upper = bin + 120; - lower = bin - 120; - - for (i = 0; i < 123; i++) { - if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { - - /* workaround for gcc bug #37014 */ - volatile int tmp_v = abs(cur_vit_mask - bin); - - if (tmp_v < 75) - mask_amt = 1; - else - mask_amt = 0; - if (cur_vit_mask < 0) - mask_m[abs(cur_vit_mask / 100)] = mask_amt; - else - mask_p[cur_vit_mask / 100] = mask_amt; - } - cur_vit_mask -= 100; - } - - tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) - | (mask_m[48] << 26) | (mask_m[49] << 24) - | (mask_m[50] << 22) | (mask_m[51] << 20) - | (mask_m[52] << 18) | (mask_m[53] << 16) - | (mask_m[54] << 14) | (mask_m[55] << 12) - | (mask_m[56] << 10) | (mask_m[57] << 8) - | (mask_m[58] << 6) | (mask_m[59] << 4) - | (mask_m[60] << 2) | (mask_m[61] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); - REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); - - tmp_mask = (mask_m[31] << 28) - | (mask_m[32] << 26) | (mask_m[33] << 24) - | (mask_m[34] << 22) | (mask_m[35] << 20) - | (mask_m[36] << 18) | (mask_m[37] << 16) - | (mask_m[48] << 14) | (mask_m[39] << 12) - | (mask_m[40] << 10) | (mask_m[41] << 8) - | (mask_m[42] << 6) | (mask_m[43] << 4) - | (mask_m[44] << 2) | (mask_m[45] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); - - tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) - | (mask_m[18] << 26) | (mask_m[18] << 24) - | (mask_m[20] << 22) | (mask_m[20] << 20) - | (mask_m[22] << 18) | (mask_m[22] << 16) - | (mask_m[24] << 14) | (mask_m[24] << 12) - | (mask_m[25] << 10) | (mask_m[26] << 8) - | (mask_m[27] << 6) | (mask_m[28] << 4) - | (mask_m[29] << 2) | (mask_m[30] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); - - tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) - | (mask_m[2] << 26) | (mask_m[3] << 24) - | (mask_m[4] << 22) | (mask_m[5] << 20) - | (mask_m[6] << 18) | (mask_m[7] << 16) - | (mask_m[8] << 14) | (mask_m[9] << 12) - | (mask_m[10] << 10) | (mask_m[11] << 8) - | (mask_m[12] << 6) | (mask_m[13] << 4) - | (mask_m[14] << 2) | (mask_m[15] << 0); - REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); - - tmp_mask = (mask_p[15] << 28) - | (mask_p[14] << 26) | (mask_p[13] << 24) - | (mask_p[12] << 22) | (mask_p[11] << 20) - | (mask_p[10] << 18) | (mask_p[9] << 16) - | (mask_p[8] << 14) | (mask_p[7] << 12) - | (mask_p[6] << 10) | (mask_p[5] << 8) - | (mask_p[4] << 6) | (mask_p[3] << 4) - | (mask_p[2] << 2) | (mask_p[1] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); - - tmp_mask = (mask_p[30] << 28) - | (mask_p[29] << 26) | (mask_p[28] << 24) - | (mask_p[27] << 22) | (mask_p[26] << 20) - | (mask_p[25] << 18) | (mask_p[24] << 16) - | (mask_p[23] << 14) | (mask_p[22] << 12) - | (mask_p[21] << 10) | (mask_p[20] << 8) - | (mask_p[19] << 6) | (mask_p[18] << 4) - | (mask_p[17] << 2) | (mask_p[16] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); - - tmp_mask = (mask_p[45] << 28) - | (mask_p[44] << 26) | (mask_p[43] << 24) - | (mask_p[42] << 22) | (mask_p[41] << 20) - | (mask_p[40] << 18) | (mask_p[39] << 16) - | (mask_p[38] << 14) | (mask_p[37] << 12) - | (mask_p[36] << 10) | (mask_p[35] << 8) - | (mask_p[34] << 6) | (mask_p[33] << 4) - | (mask_p[32] << 2) | (mask_p[31] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); - - tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) - | (mask_p[59] << 26) | (mask_p[58] << 24) - | (mask_p[57] << 22) | (mask_p[56] << 20) - | (mask_p[55] << 18) | (mask_p[54] << 16) - | (mask_p[53] << 14) | (mask_p[52] << 12) - | (mask_p[51] << 10) | (mask_p[50] << 8) - | (mask_p[49] << 6) | (mask_p[48] << 4) - | (mask_p[47] << 2) | (mask_p[46] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); -} - -/* All code below is for non single-chip solutions */ - -/** - * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters - * @rfbuf: - * @reg32: - * @numBits: - * @firstBit: - * @column: - * - * Performs analog "swizzling" of parameters into their location. - * Used on external AR2133/AR5133 radios. - */ -static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, - u32 numBits, u32 firstBit, - u32 column) -{ - u32 tmp32, mask, arrayEntry, lastBit; - int32_t bitPosition, bitsLeft; - - tmp32 = ath9k_hw_reverse_bits(reg32, numBits); - arrayEntry = (firstBit - 1) / 8; - bitPosition = (firstBit - 1) % 8; - bitsLeft = numBits; - while (bitsLeft > 0) { - lastBit = (bitPosition + bitsLeft > 8) ? - 8 : bitPosition + bitsLeft; - mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) << - (column * 8); - rfBuf[arrayEntry] &= ~mask; - rfBuf[arrayEntry] |= ((tmp32 << bitPosition) << - (column * 8)) & mask; - bitsLeft -= 8 - bitPosition; - tmp32 = tmp32 >> (8 - bitPosition); - bitPosition = 0; - arrayEntry++; - } -} - -/* - * Fix on 2.4 GHz band for orientation sensitivity issue by increasing - * rf_pwd_icsyndiv. - * - * Theoretical Rules: - * if 2 GHz band - * if forceBiasAuto - * if synth_freq < 2412 - * bias = 0 - * else if 2412 <= synth_freq <= 2422 - * bias = 1 - * else // synth_freq > 2422 - * bias = 2 - * else if forceBias > 0 - * bias = forceBias & 7 - * else - * no change, use value from ini file - * else - * no change, invalid band - * - * 1st Mod: - * 2422 also uses value of 2 - * <approved> - * - * 2nd Mod: - * Less than 2412 uses value of 0, 2412 and above uses value of 2 - */ -static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq) -{ - struct ath_common *common = ath9k_hw_common(ah); - u32 tmp_reg; - int reg_writes = 0; - u32 new_bias = 0; - - if (!AR_SREV_5416(ah) || synth_freq >= 3000) { - return; - } - - BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); - - if (synth_freq < 2412) - new_bias = 0; - else if (synth_freq < 2422) - new_bias = 1; - else - new_bias = 2; - - /* pre-reverse this field */ - tmp_reg = ath9k_hw_reverse_bits(new_bias, 3); - - ath_print(common, ATH_DBG_CONFIG, - "Force rf_pwd_icsyndiv to %1d on %4d\n", - new_bias, synth_freq); - - /* swizzle rf_pwd_icsyndiv */ - ath9k_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3); - - /* write Bank 6 with new params */ - REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes); -} - -/** - * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios - * @ah: atheros hardware stucture - * @chan: - * - * For the external AR2133/AR5133 radios, takes the MHz channel value and set - * the channel value. Assumes writes enabled to analog bus and bank6 register - * cache in ah->analogBank6Data. - */ -int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) -{ - struct ath_common *common = ath9k_hw_common(ah); - u32 channelSel = 0; - u32 bModeSynth = 0; - u32 aModeRefSel = 0; - u32 reg32 = 0; - u16 freq; - struct chan_centers centers; - - ath9k_hw_get_channel_centers(ah, chan, ¢ers); - freq = centers.synth_center; - - if (freq < 4800) { - u32 txctl; - - if (((freq - 2192) % 5) == 0) { - channelSel = ((freq - 672) * 2 - 3040) / 10; - bModeSynth = 0; - } else if (((freq - 2224) % 5) == 0) { - channelSel = ((freq - 704) * 2 - 3040) / 10; - bModeSynth = 1; - } else { - ath_print(common, ATH_DBG_FATAL, - "Invalid channel %u MHz\n", freq); - return -EINVAL; - } - - channelSel = (channelSel << 2) & 0xff; - channelSel = ath9k_hw_reverse_bits(channelSel, 8); - - txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); - if (freq == 2484) { - - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl | AR_PHY_CCK_TX_CTRL_JAPAN); - } else { - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); - } - - } else if ((freq % 20) == 0 && freq >= 5120) { - channelSel = - ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8); - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else if ((freq % 10) == 0) { - channelSel = - ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8); - if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) - aModeRefSel = ath9k_hw_reverse_bits(2, 2); - else - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else if ((freq % 5) == 0) { - channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8); - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else { - ath_print(common, ATH_DBG_FATAL, - "Invalid channel %u MHz\n", freq); - return -EINVAL; - } - - ath9k_hw_force_bias(ah, freq); - - reg32 = - (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) | - (1 << 5) | 0x1; - - REG_WRITE(ah, AR_PHY(0x37), reg32); - - ah->curchan = chan; - ah->curchan_rad_index = -1; - - return 0; -} - -/** - * ath9k_hw_spur_mitigate - convert baseband spur frequency for external radios - * @ah: atheros hardware structure - * @chan: - * - * For non single-chip solutions. Converts to baseband spur frequency given the - * input channel frequency and compute register settings below. - */ -void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int bb_spur = AR_NO_SPUR; - int bin, cur_bin; - int spur_freq_sd; - int spur_delta_phase; - int denominator; - int upper, lower, cur_vit_mask; - int tmp, new; - int i; - int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, - AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 - }; - int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, - AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 - }; - int inc[4] = { 0, 100, 0, 0 }; - - int8_t mask_m[123]; - int8_t mask_p[123]; - int8_t mask_amt; - int tmp_mask; - int cur_bb_spur; - bool is2GHz = IS_CHAN_2GHZ(chan); - - memset(&mask_m, 0, sizeof(int8_t) * 123); - memset(&mask_p, 0, sizeof(int8_t) * 123); - - for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { - cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); - if (AR_NO_SPUR == cur_bb_spur) - break; - cur_bb_spur = cur_bb_spur - (chan->channel * 10); - if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { - bb_spur = cur_bb_spur; - break; - } - } - - if (AR_NO_SPUR == bb_spur) - return; - - bin = bb_spur * 32; - - tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); - new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | - AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | - AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | - AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); - - REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new); - - new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | - AR_PHY_SPUR_REG_ENABLE_MASK_PPM | - AR_PHY_SPUR_REG_MASK_RATE_SELECT | - AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | - SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); - REG_WRITE(ah, AR_PHY_SPUR_REG, new); - - spur_delta_phase = ((bb_spur * 524288) / 100) & - AR_PHY_TIMING11_SPUR_DELTA_PHASE; - - denominator = IS_CHAN_2GHZ(chan) ? 440 : 400; - spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; - - new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | - SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | - SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); - REG_WRITE(ah, AR_PHY_TIMING11, new); - - cur_bin = -6000; - upper = bin + 100; - lower = bin - 100; - - for (i = 0; i < 4; i++) { - int pilot_mask = 0; - int chan_mask = 0; - int bp = 0; - for (bp = 0; bp < 30; bp++) { - if ((cur_bin > lower) && (cur_bin < upper)) { - pilot_mask = pilot_mask | 0x1 << bp; - chan_mask = chan_mask | 0x1 << bp; - } - cur_bin += 100; - } - cur_bin += inc[i]; - REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); - REG_WRITE(ah, chan_mask_reg[i], chan_mask); - } - - cur_vit_mask = 6100; - upper = bin + 120; - lower = bin - 120; - - for (i = 0; i < 123; i++) { - if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { - - /* workaround for gcc bug #37014 */ - volatile int tmp_v = abs(cur_vit_mask - bin); - - if (tmp_v < 75) - mask_amt = 1; - else - mask_amt = 0; - if (cur_vit_mask < 0) - mask_m[abs(cur_vit_mask / 100)] = mask_amt; - else - mask_p[cur_vit_mask / 100] = mask_amt; - } - cur_vit_mask -= 100; - } - - tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) - | (mask_m[48] << 26) | (mask_m[49] << 24) - | (mask_m[50] << 22) | (mask_m[51] << 20) - | (mask_m[52] << 18) | (mask_m[53] << 16) - | (mask_m[54] << 14) | (mask_m[55] << 12) - | (mask_m[56] << 10) | (mask_m[57] << 8) - | (mask_m[58] << 6) | (mask_m[59] << 4) - | (mask_m[60] << 2) | (mask_m[61] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); - REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); - - tmp_mask = (mask_m[31] << 28) - | (mask_m[32] << 26) | (mask_m[33] << 24) - | (mask_m[34] << 22) | (mask_m[35] << 20) - | (mask_m[36] << 18) | (mask_m[37] << 16) - | (mask_m[48] << 14) | (mask_m[39] << 12) - | (mask_m[40] << 10) | (mask_m[41] << 8) - | (mask_m[42] << 6) | (mask_m[43] << 4) - | (mask_m[44] << 2) | (mask_m[45] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); - - tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) - | (mask_m[18] << 26) | (mask_m[18] << 24) - | (mask_m[20] << 22) | (mask_m[20] << 20) - | (mask_m[22] << 18) | (mask_m[22] << 16) - | (mask_m[24] << 14) | (mask_m[24] << 12) - | (mask_m[25] << 10) | (mask_m[26] << 8) - | (mask_m[27] << 6) | (mask_m[28] << 4) - | (mask_m[29] << 2) | (mask_m[30] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); - - tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) - | (mask_m[2] << 26) | (mask_m[3] << 24) - | (mask_m[4] << 22) | (mask_m[5] << 20) - | (mask_m[6] << 18) | (mask_m[7] << 16) - | (mask_m[8] << 14) | (mask_m[9] << 12) - | (mask_m[10] << 10) | (mask_m[11] << 8) - | (mask_m[12] << 6) | (mask_m[13] << 4) - | (mask_m[14] << 2) | (mask_m[15] << 0); - REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); - - tmp_mask = (mask_p[15] << 28) - | (mask_p[14] << 26) | (mask_p[13] << 24) - | (mask_p[12] << 22) | (mask_p[11] << 20) - | (mask_p[10] << 18) | (mask_p[9] << 16) - | (mask_p[8] << 14) | (mask_p[7] << 12) - | (mask_p[6] << 10) | (mask_p[5] << 8) - | (mask_p[4] << 6) | (mask_p[3] << 4) - | (mask_p[2] << 2) | (mask_p[1] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); - - tmp_mask = (mask_p[30] << 28) - | (mask_p[29] << 26) | (mask_p[28] << 24) - | (mask_p[27] << 22) | (mask_p[26] << 20) - | (mask_p[25] << 18) | (mask_p[24] << 16) - | (mask_p[23] << 14) | (mask_p[22] << 12) - | (mask_p[21] << 10) | (mask_p[20] << 8) - | (mask_p[19] << 6) | (mask_p[18] << 4) - | (mask_p[17] << 2) | (mask_p[16] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); - - tmp_mask = (mask_p[45] << 28) - | (mask_p[44] << 26) | (mask_p[43] << 24) - | (mask_p[42] << 22) | (mask_p[41] << 20) - | (mask_p[40] << 18) | (mask_p[39] << 16) - | (mask_p[38] << 14) | (mask_p[37] << 12) - | (mask_p[36] << 10) | (mask_p[35] << 8) - | (mask_p[34] << 6) | (mask_p[33] << 4) - | (mask_p[32] << 2) | (mask_p[31] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); - - tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) - | (mask_p[59] << 26) | (mask_p[58] << 24) - | (mask_p[57] << 22) | (mask_p[56] << 20) - | (mask_p[55] << 18) | (mask_p[54] << 16) - | (mask_p[53] << 14) | (mask_p[52] << 12) - | (mask_p[51] << 10) | (mask_p[50] << 8) - | (mask_p[49] << 6) | (mask_p[48] << 4) - | (mask_p[47] << 2) | (mask_p[46] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); -} - -/** - * ath9k_hw_rf_alloc_ext_banks - allocates banks for external radio programming - * @ah: atheros hardware structure - * - * Only required for older devices with external AR2133/AR5133 radios. - */ -int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah) -{ -#define ATH_ALLOC_BANK(bank, size) do { \ - bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \ - if (!bank) { \ - ath_print(common, ATH_DBG_FATAL, \ - "Cannot allocate RF banks\n"); \ - return -ENOMEM; \ - } \ - } while (0); - - struct ath_common *common = ath9k_hw_common(ah); - - BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); - - ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows); - ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows); - ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows); - ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows); - ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows); - ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows); - ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows); - ATH_ALLOC_BANK(ah->addac5416_21, - ah->iniAddac.ia_rows * ah->iniAddac.ia_columns); - ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows); - - return 0; -#undef ATH_ALLOC_BANK -} - - -/** - * ath9k_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers - * @ah: atheros hardware struture - * For the external AR2133/AR5133 radios banks. - */ -void -ath9k_hw_rf_free_ext_banks(struct ath_hw *ah) -{ -#define ATH_FREE_BANK(bank) do { \ - kfree(bank); \ - bank = NULL; \ - } while (0); - - BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); - - ATH_FREE_BANK(ah->analogBank0Data); - ATH_FREE_BANK(ah->analogBank1Data); - ATH_FREE_BANK(ah->analogBank2Data); - ATH_FREE_BANK(ah->analogBank3Data); - ATH_FREE_BANK(ah->analogBank6Data); - ATH_FREE_BANK(ah->analogBank6TPCData); - ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->addac5416_21); - ATH_FREE_BANK(ah->bank6Temp); - -#undef ATH_FREE_BANK -} - -/* * - * ath9k_hw_set_rf_regs - programs rf registers based on EEPROM - * @ah: atheros hardware structure - * @chan: - * @modesIndex: - * - * Used for the external AR2133/AR5133 radios. - * - * Reads the EEPROM header info from the device structure and programs - * all rf registers. This routine requires access to the analog - * rf device. This is not required for single-chip devices. - */ -bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, - u16 modesIndex) -{ - u32 eepMinorRev; - u32 ob5GHz = 0, db5GHz = 0; - u32 ob2GHz = 0, db2GHz = 0; - int regWrites = 0; - - /* - * Software does not need to program bank data - * for single chip devices, that is AR9280 or anything - * after that. - */ - if (AR_SREV_9280_10_OR_LATER(ah)) - return true; - - /* Setup rf parameters */ - eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV); - - /* Setup Bank 0 Write */ - RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1); - - /* Setup Bank 1 Write */ - RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1); - - /* Setup Bank 2 Write */ - RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1); - - /* Setup Bank 6 Write */ - RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3, - modesIndex); - { - int i; - for (i = 0; i < ah->iniBank6TPC.ia_rows; i++) { - ah->analogBank6Data[i] = - INI_RA(&ah->iniBank6TPC, i, modesIndex); - } - } - - /* Only the 5 or 2 GHz OB/DB need to be set for a mode */ - if (eepMinorRev >= 2) { - if (IS_CHAN_2GHZ(chan)) { - ob2GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_2); - db2GHz = ah->eep_ops->get_eeprom(ah, EEP_DB_2); - ath9k_phy_modify_rx_buffer(ah->analogBank6Data, - ob2GHz, 3, 197, 0); - ath9k_phy_modify_rx_buffer(ah->analogBank6Data, - db2GHz, 3, 194, 0); - } else { - ob5GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_5); - db5GHz = ah->eep_ops->get_eeprom(ah, EEP_DB_5); - ath9k_phy_modify_rx_buffer(ah->analogBank6Data, - ob5GHz, 3, 203, 0); - ath9k_phy_modify_rx_buffer(ah->analogBank6Data, - db5GHz, 3, 200, 0); - } - } - - /* Setup Bank 7 Setup */ - RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1); - - /* Write Analog registers */ - REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data, - regWrites); - REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data, - regWrites); - REG_WRITE_RF_ARRAY(&ah->iniBank2, ah->analogBank2Data, - regWrites); - REG_WRITE_RF_ARRAY(&ah->iniBank3, ah->analogBank3Data, - regWrites); - REG_WRITE_RF_ARRAY(&ah->iniBank6TPC, ah->analogBank6Data, - regWrites); - REG_WRITE_RF_ARRAY(&ah->iniBank7, ah->analogBank7Data, - regWrites); - - return true; -} |