diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ani.c | 47 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ani.h | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 33 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/attach.c | 23 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 2373 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/base.h | 33 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/debug.c | 128 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/debug.h | 15 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/dma.c | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/eeprom.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/pcu.c | 297 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 26 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/qcu.c | 99 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reg.h | 74 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reset.c | 34 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/rfbuffer.h | 4 |
16 files changed, 1659 insertions, 1544 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index 26dbe65fedb0..f1419198a479 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -355,41 +355,28 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) /** - * ath5k_hw_ani_get_listen_time() - Calculate time spent listening + * ath5k_hw_ani_get_listen_time() - Update counters and return listening time * * Return an approximation of the time spent "listening" in milliseconds (ms) - * since the last call of this function by deducting the cycles spent - * transmitting and receiving from the total cycle count. - * Save profile count values for debugging/statistics and because we might want - * to use them later. - * - * We assume no one else clears these registers! + * since the last call of this function. + * Save a snapshot of the counter values for debugging/statistics. */ static int ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as) { + struct ath_common *common = ath5k_hw_common(ah); int listen; - /* freeze */ - ath5k_hw_reg_write(ah, AR5K_MIBC_FMC, AR5K_MIBC); - /* read */ - as->pfc_cycles = ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE); - as->pfc_busy = ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR); - as->pfc_tx = ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX); - as->pfc_rx = ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX); - /* clear */ - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); - /* un-freeze */ - ath5k_hw_reg_write(ah, 0, AR5K_MIBC); - - /* TODO: where does 44000 come from? (11g clock rate?) */ - listen = (as->pfc_cycles - as->pfc_rx - as->pfc_tx) / 44000; - - if (as->pfc_cycles == 0 || listen < 0) - return 0; + spin_lock_bh(&common->cc_lock); + + ath_hw_cycle_counters_update(common); + memcpy(&as->last_cc, &common->cc_ani, sizeof(as->last_cc)); + + /* clears common->cc_ani */ + listen = ath_hw_get_listen_time(common); + + spin_unlock_bh(&common->cc_lock); + return listen; } @@ -552,9 +539,9 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah) if (ah->ah_sc->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) return; - /* if one of the errors triggered, we can get a superfluous second - * interrupt, even though we have already reset the register. the - * function detects that so we can return early */ + /* If one of the errors triggered, we can get a superfluous second + * interrupt, even though we have already reset the register. The + * function detects that so we can return early. */ if (ath5k_ani_save_and_clear_phy_errors(ah, as) == 0) return; diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h index 55cf26d8522c..d0a664039c87 100644 --- a/drivers/net/wireless/ath/ath5k/ani.h +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -75,10 +75,7 @@ struct ath5k_ani_state { unsigned int cck_errors; /* debug/statistics only: numbers from last ANI calibration */ - unsigned int pfc_tx; - unsigned int pfc_rx; - unsigned int pfc_busy; - unsigned int pfc_cycles; + struct ath_cycle_counters last_cc; unsigned int last_listen; unsigned int last_ofdm_errors; unsigned int last_cck_errors; diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index ea6362a8988d..308b79e1ff08 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -175,7 +175,7 @@ #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 #define AR5K_TUNE_RADAR_ALERT false #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 -#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) +#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) #define AR5K_TUNE_REGISTER_TIMEOUT 20000 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to * be the max value. */ @@ -206,6 +206,8 @@ #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ #define ATH5K_TUNE_CALIBRATION_INTERVAL_NF 60000 /* 60 sec */ +#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ + #define AR5K_INIT_CARR_SENSE_EN 1 /*Swap RX/TX Descriptor for big endian archs*/ @@ -256,8 +258,6 @@ (AR5K_INIT_PROG_IFS_TURBO) \ ) -/* token to use for aifs, cwmin, cwmax in MadWiFi */ -#define AR5K_TXQ_USEDEFAULT ((u32) -1) /* GENERIC CHIPSET DEFINITIONS */ @@ -343,15 +343,12 @@ struct ath5k_srev_name { #define AR5K_SREV_PHY_5413 0x61 #define AR5K_SREV_PHY_2425 0x70 -/* IEEE defs */ -#define IEEE80211_MAX_LEN 2500 - /* TODO add support to mac80211 for vendor-specific rates and modes */ /* * Some of this information is based on Documentation from: * - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * * Modulation for Atheros' eXtended Range - range enhancing extension that is * supposed to double the distance an Atheros client device can keep a @@ -531,9 +528,9 @@ struct ath5k_txq_info { enum ath5k_tx_queue tqi_type; enum ath5k_tx_queue_subtype tqi_subtype; u16 tqi_flags; /* Tx queue flags (see above) */ - u32 tqi_aifs; /* Arbitrated Interframe Space */ - s32 tqi_cw_min; /* Minimum Contention Window */ - s32 tqi_cw_max; /* Maximum Contention Window */ + u8 tqi_aifs; /* Arbitrated Interframe Space */ + u16 tqi_cw_min; /* Minimum Contention Window */ + u16 tqi_cw_max; /* Maximum Contention Window */ u32 tqi_cbr_period; /* Constant bit rate period */ u32 tqi_cbr_overflow_limit; u32 tqi_burst_time; @@ -1031,8 +1028,6 @@ struct ath5k_hw { bool ah_turbo; bool ah_calibration; bool ah_single_chip; - bool ah_aes_support; - bool ah_combined_mic; enum ath5k_version ah_version; enum ath5k_radio ah_radio; @@ -1046,10 +1041,6 @@ struct ath5k_hw { #define ah_modes ah_capabilities.cap_mode #define ah_ee_version ah_capabilities.cap_eeprom.ee_version - u32 ah_atim_window; - u32 ah_aifs; - u32 ah_cw_min; - u32 ah_cw_max; u32 ah_limit_tx_retries; u8 ah_coverage_class; @@ -1190,7 +1181,7 @@ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); /* BSSID Functions */ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); -void ath5k_hw_set_associd(struct ath5k_hw *ah); +void ath5k_hw_set_bssid(struct ath5k_hw *ah); void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); /* Receive start/stop functions */ void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); @@ -1204,17 +1195,13 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); void ath5k_hw_reset_tsf(struct ath5k_hw *ah); void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); +bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); /* ACK bit rate */ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); /* Clock rate related functions */ unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); -unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah); -/* Key table (WEP) functions */ -int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); -int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, - const struct ieee80211_key_conf *key, const u8 *mac); -int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); +void ath5k_hw_set_clockrate(struct ath5k_hw *ah); /* Queue Control Unit, DFS Control Unit Functions */ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index b32e28caeee2..cd0b14a0a93a 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -118,9 +118,6 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ah->ah_turbo = false; ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; ah->ah_imr = 0; - ah->ah_atim_window = 0; - ah->ah_aifs = AR5K_TUNE_AIFS; - ah->ah_cw_min = AR5K_TUNE_CWMIN; ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; ah->ah_software_retry = false; ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT; @@ -139,12 +136,12 @@ int ath5k_hw_attach(struct ath5k_softc *sc) else ah->ah_version = AR5K_AR5212; - /*Fill the ath5k_hw struct with the needed functions*/ + /* Fill the ath5k_hw struct with the needed functions */ ret = ath5k_hw_init_desc_functions(ah); if (ret) goto err_free; - /* Bring device out of sleep and reset it's units */ + /* Bring device out of sleep and reset its units */ ret = ath5k_hw_nic_wakeup(ah, 0, true); if (ret) goto err_free; @@ -158,7 +155,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) CHANNEL_5GHZ); ah->ah_phy = AR5K_PHY(0); - /* Try to identify radio chip based on it's srev */ + /* Try to identify radio chip based on its srev */ switch (ah->ah_radio_5ghz_revision & 0xf0) { case AR5K_SREV_RAD_5111: ah->ah_radio = AR5K_RF5111; @@ -314,12 +311,16 @@ int ath5k_hw_attach(struct ath5k_softc *sc) } /* Crypto settings */ - ah->ah_aes_support = srev >= AR5K_SREV_AR5212_V4 && - (ee->ee_version >= AR5K_EEPROM_VERSION_5_0 && - !AR5K_EEPROM_AES_DIS(ee->ee_misc5)); + common->keymax = (sc->ah->ah_version == AR5K_AR5210 ? + AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211); + + if (srev >= AR5K_SREV_AR5212_V4 && + (ee->ee_version >= AR5K_EEPROM_VERSION_5_0 && + !AR5K_EEPROM_AES_DIS(ee->ee_misc5))) + common->crypt_caps |= ATH_CRYPT_CAP_CIPHER_AESCCM; if (srev >= AR5K_SREV_AR2414) { - ah->ah_combined_mic = true; + common->crypt_caps |= ATH_CRYPT_CAP_MIC_COMBINED; AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE, AR5K_MISC_MODE_COMBINED_MIC); } @@ -329,7 +330,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ memcpy(common->curbssid, ath_bcast_mac, ETH_ALEN); - ath5k_hw_set_associd(ah); + ath5k_hw_set_bssid(ah); ath5k_hw_set_opmode(ah, sc->opmode); ath5k_hw_rfgain_opt_init(ah); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index d77ce9906b6c..f1ae75d35d5d 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -52,6 +52,7 @@ #include <linux/ethtool.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <linux/etherdevice.h> #include <net/ieee80211_radiotap.h> @@ -61,6 +62,7 @@ #include "reg.h" #include "debug.h" #include "ani.h" +#include "../debug.h" static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); @@ -70,11 +72,6 @@ static int modparam_all_channels; module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO); MODULE_PARM_DESC(all_channels, "Expose all channels the device can use."); - -/******************\ -* Internal defines * -\******************/ - /* Module info */ MODULE_AUTHOR("Jiri Slaby"); MODULE_AUTHOR("Nick Kossifidis"); @@ -83,6 +80,10 @@ MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION("0.6.0 (EXPERIMENTAL)"); +static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); +static int ath5k_beacon_update(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); +static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); /* Known PCI ids */ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { @@ -190,129 +191,6 @@ static const struct ieee80211_rate ath5k_rates[] = { /* XR missing */ }; -/* - * Prototypes - PCI stack related functions - */ -static int __devinit ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void __devexit ath5k_pci_remove(struct pci_dev *pdev); -#ifdef CONFIG_PM_SLEEP -static int ath5k_pci_suspend(struct device *dev); -static int ath5k_pci_resume(struct device *dev); - -static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); -#define ATH5K_PM_OPS (&ath5k_pm_ops) -#else -#define ATH5K_PM_OPS NULL -#endif /* CONFIG_PM_SLEEP */ - -static struct pci_driver ath5k_pci_driver = { - .name = KBUILD_MODNAME, - .id_table = ath5k_pci_id_table, - .probe = ath5k_pci_probe, - .remove = __devexit_p(ath5k_pci_remove), - .driver.pm = ATH5K_PM_OPS, -}; - - - -/* - * Prototypes - MAC 802.11 stack related functions - */ -static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq); -static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); -static int ath5k_start(struct ieee80211_hw *hw); -static void ath5k_stop(struct ieee80211_hw *hw); -static int ath5k_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static void ath5k_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static int ath5k_config(struct ieee80211_hw *hw, u32 changed); -static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, - struct netdev_hw_addr_list *mc_list); -static void ath5k_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *new_flags, - u64 multicast); -static int ath5k_set_key(struct ieee80211_hw *hw, - enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key); -static int ath5k_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats); -static int ath5k_get_survey(struct ieee80211_hw *hw, - int idx, struct survey_info *survey); -static u64 ath5k_get_tsf(struct ieee80211_hw *hw); -static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf); -static void ath5k_reset_tsf(struct ieee80211_hw *hw); -static int ath5k_beacon_update(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static void ath5k_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes); -static void ath5k_sw_scan_start(struct ieee80211_hw *hw); -static void ath5k_sw_scan_complete(struct ieee80211_hw *hw); -static void ath5k_set_coverage_class(struct ieee80211_hw *hw, - u8 coverage_class); - -static const struct ieee80211_ops ath5k_hw_ops = { - .tx = ath5k_tx, - .start = ath5k_start, - .stop = ath5k_stop, - .add_interface = ath5k_add_interface, - .remove_interface = ath5k_remove_interface, - .config = ath5k_config, - .prepare_multicast = ath5k_prepare_multicast, - .configure_filter = ath5k_configure_filter, - .set_key = ath5k_set_key, - .get_stats = ath5k_get_stats, - .get_survey = ath5k_get_survey, - .conf_tx = NULL, - .get_tsf = ath5k_get_tsf, - .set_tsf = ath5k_set_tsf, - .reset_tsf = ath5k_reset_tsf, - .bss_info_changed = ath5k_bss_info_changed, - .sw_scan_start = ath5k_sw_scan_start, - .sw_scan_complete = ath5k_sw_scan_complete, - .set_coverage_class = ath5k_set_coverage_class, -}; - -/* - * Prototypes - Internal functions - */ -/* Attach detach */ -static int ath5k_attach(struct pci_dev *pdev, - struct ieee80211_hw *hw); -static void ath5k_detach(struct pci_dev *pdev, - struct ieee80211_hw *hw); -/* Channel/mode setup */ -static inline short ath5k_ieee2mhz(short chan); -static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, - struct ieee80211_channel *channels, - unsigned int mode, - unsigned int max); -static int ath5k_setup_bands(struct ieee80211_hw *hw); -static int ath5k_chan_set(struct ath5k_softc *sc, - struct ieee80211_channel *chan); -static void ath5k_setcurmode(struct ath5k_softc *sc, - unsigned int mode); -static void ath5k_mode_setup(struct ath5k_softc *sc); - -/* Descriptor setup */ -static int ath5k_desc_alloc(struct ath5k_softc *sc, - struct pci_dev *pdev); -static void ath5k_desc_free(struct ath5k_softc *sc, - struct pci_dev *pdev); -/* Buffers setup */ -static int ath5k_rxbuf_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static int ath5k_txbuf_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf, - struct ath5k_txq *txq, int padsize); - static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf) { @@ -345,35 +223,6 @@ static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc, } -/* Queues setup */ -static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc, - int qtype, int subtype); -static int ath5k_beaconq_setup(struct ath5k_hw *ah); -static int ath5k_beaconq_config(struct ath5k_softc *sc); -static void ath5k_txq_drainq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_txq_cleanup(struct ath5k_softc *sc); -static void ath5k_txq_release(struct ath5k_softc *sc); -/* Rx handling */ -static int ath5k_rx_start(struct ath5k_softc *sc); -static void ath5k_rx_stop(struct ath5k_softc *sc); -static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc, - struct sk_buff *skb, - struct ath5k_rx_status *rs); -static void ath5k_tasklet_rx(unsigned long data); -/* Tx handling */ -static void ath5k_tx_processq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_tasklet_tx(unsigned long data); -/* Beacon handling */ -static int ath5k_beacon_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static void ath5k_beacon_send(struct ath5k_softc *sc); -static void ath5k_beacon_config(struct ath5k_softc *sc); -static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); -static void ath5k_tasklet_beacon(unsigned long data); -static void ath5k_tasklet_ani(unsigned long data); - static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) { u64 tsf = ath5k_hw_get_tsf64(ah); @@ -384,50 +233,6 @@ static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) return (tsf & ~0x7fff) | rstamp; } -/* Interrupt handling */ -static int ath5k_init(struct ath5k_softc *sc); -static int ath5k_stop_locked(struct ath5k_softc *sc); -static int ath5k_stop_hw(struct ath5k_softc *sc); -static irqreturn_t ath5k_intr(int irq, void *dev_id); -static void ath5k_reset_work(struct work_struct *work); - -static void ath5k_tasklet_calibrate(unsigned long data); - -/* - * Module init/exit functions - */ -static int __init -init_ath5k_pci(void) -{ - int ret; - - ath5k_debug_init(); - - ret = pci_register_driver(&ath5k_pci_driver); - if (ret) { - printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); - return ret; - } - - return 0; -} - -static void __exit -exit_ath5k_pci(void) -{ - pci_unregister_driver(&ath5k_pci_driver); - - ath5k_debug_finish(); -} - -module_init(init_ath5k_pci); -module_exit(exit_ath5k_pci); - - -/********************\ -* PCI Initialization * -\********************/ - static const char * ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) { @@ -466,299 +271,6 @@ static const struct ath_ops ath5k_common_ops = { .write = ath5k_iowrite32, }; -static int __devinit -ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - void __iomem *mem; - struct ath5k_softc *sc; - struct ath_common *common; - struct ieee80211_hw *hw; - int ret; - u8 csz; - - /* - * L0s needs to be disabled on all ath5k cards. - * - * For distributions shipping with CONFIG_PCIEASPM (this will be enabled - * by default in the future in 2.6.36) this will also mean both L1 and - * L0s will be disabled when a pre 1.1 PCIe device is detected. We do - * know L1 works correctly even for all ath5k pre 1.1 PCIe devices - * though but cannot currently undue the effect of a blacklist, for - * details you can read pcie_aspm_sanity_check() and see how it adjusts - * the device link capability. - * - * It may be possible in the future to implement some PCI API to allow - * drivers to override blacklists for pre 1.1 PCIe but for now it is - * best to accept that both L0s and L1 will be disabled completely for - * distributions shipping with CONFIG_PCIEASPM rather than having this - * issue present. Motivation for adding this new API will be to help - * with power consumption for some of these devices. - */ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, "can't enable device\n"); - goto err; - } - - /* XXX 32-bit addressing only */ - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { - dev_err(&pdev->dev, "32-bit DMA not available\n"); - goto err_dis; - } - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); - if (csz == 0) { - /* - * Linux 2.4.18 (at least) writes the cache line size - * register as a 16-bit wide register which is wrong. - * We must have this setup properly for rx buffer - * DMA to work so force a reasonable value here if it - * comes up zero. - */ - csz = L1_CACHE_BYTES >> 2; - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); - } - /* - * The default setting of latency timer yields poor results, - * set it to the value used by other systems. It may be worth - * tweaking this setting more. - */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); - - /* Enable bus mastering */ - pci_set_master(pdev); - - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_write_config_byte(pdev, 0x41, 0); - - ret = pci_request_region(pdev, 0, "ath5k"); - if (ret) { - dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); - goto err_dis; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; - ret = -EIO; - goto err_reg; - } - - /* - * Allocate hw (mac80211 main struct) - * and hw->priv (driver private data) - */ - hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); - if (hw == NULL) { - dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); - ret = -ENOMEM; - goto err_map; - } - - dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); - - /* Initialize driver private data */ - SET_IEEE80211_DEV(hw, &pdev->dev); - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_AP) | - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_MESH_POINT); - - hw->extra_tx_headroom = 2; - hw->channel_change_time = 5000; - sc = hw->priv; - sc->hw = hw; - sc->pdev = pdev; - - ath5k_debug_init_device(sc); - - /* - * Mark the device as detached to avoid processing - * interrupts until setup is complete. - */ - __set_bit(ATH_STAT_INVALID, sc->status); - - sc->iobase = mem; /* So we can unmap it on detach */ - sc->opmode = NL80211_IFTYPE_STATION; - sc->bintval = 1000; - mutex_init(&sc->lock); - spin_lock_init(&sc->rxbuflock); - spin_lock_init(&sc->txbuflock); - spin_lock_init(&sc->block); - - /* Set private data */ - pci_set_drvdata(pdev, sc); - - /* Setup interrupt handler */ - ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); - if (ret) { - ATH5K_ERR(sc, "request_irq failed\n"); - goto err_free; - } - - /*If we passed the test malloc a ath5k_hw struct*/ - sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (!sc->ah) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err_irq; - } - - sc->ah->ah_sc = sc; - sc->ah->ah_iobase = sc->iobase; - common = ath5k_hw_common(sc->ah); - common->ops = &ath5k_common_ops; - common->ah = sc->ah; - common->hw = hw; - common->cachelsz = csz << 2; /* convert to bytes */ - - /* Initialize device */ - ret = ath5k_hw_attach(sc); - if (ret) { - goto err_free_ah; - } - - /* set up multi-rate retry capabilities */ - if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_rates = 4; - hw->max_rate_tries = 11; - } - - /* Finish private driver data initialization */ - ret = ath5k_attach(pdev, hw); - if (ret) - goto err_ah; - - ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", - ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), - sc->ah->ah_mac_srev, - sc->ah->ah_phy_revision); - - if (!sc->ah->ah_single_chip) { - /* Single chip radio (!RF5111) */ - if (sc->ah->ah_radio_5ghz_revision && - !sc->ah->ah_radio_2ghz_revision) { - /* No 5GHz support -> report 2GHz radio */ - if (!test_bit(AR5K_MODE_11A, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ - } else if (!test_bit(AR5K_MODE_11B, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* Multiband radio */ - } else { - ATH5K_INFO(sc, "RF%s multiband radio found" - " (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - } - } - /* Multi chip radio (RF5111 - RF2111) -> - * report both 2GHz/5GHz radios */ - else if (sc->ah->ah_radio_5ghz_revision && - sc->ah->ah_radio_2ghz_revision){ - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_2ghz_revision), - sc->ah->ah_radio_2ghz_revision); - } - } - - - /* ready to process interrupts */ - __clear_bit(ATH_STAT_INVALID, sc->status); - - return 0; -err_ah: - ath5k_hw_detach(sc->ah); -err_irq: - free_irq(pdev->irq, sc); -err_free_ah: - kfree(sc->ah); -err_free: - ieee80211_free_hw(hw); -err_map: - pci_iounmap(pdev, mem); -err_reg: - pci_release_region(pdev, 0); -err_dis: - pci_disable_device(pdev); -err: - return ret; -} - -static void __devexit -ath5k_pci_remove(struct pci_dev *pdev) -{ - struct ath5k_softc *sc = pci_get_drvdata(pdev); - - ath5k_debug_finish_device(sc); - ath5k_detach(pdev, sc->hw); - ath5k_hw_detach(sc->ah); - kfree(sc->ah); - free_irq(pdev->irq, sc); - pci_iounmap(pdev, sc->iobase); - pci_release_region(pdev, 0); - pci_disable_device(pdev); - ieee80211_free_hw(sc->hw); -} - -#ifdef CONFIG_PM_SLEEP -static int ath5k_pci_suspend(struct device *dev) -{ - struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); - - ath5k_led_off(sc); - return 0; -} - -static int ath5k_pci_resume(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct ath5k_softc *sc = pci_get_drvdata(pdev); - - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_write_config_byte(pdev, 0x41, 0); - - ath5k_led_enable(sc); - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - - /***********************\ * Driver Initialization * \***********************/ @@ -772,170 +284,6 @@ static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *re return ath_reg_notifier_apply(wiphy, request, regulatory); } -static int -ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); - u8 mac[ETH_ALEN] = {}; - int ret; - - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); - - /* - * Check if the MAC has multi-rate retry support. - * We do this by trying to setup a fake extended - * descriptor. MAC's that don't have support will - * return false w/o doing anything. MAC's that do - * support it will return true w/o doing anything. - */ - ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); - - if (ret < 0) - goto err; - if (ret > 0) - __set_bit(ATH_STAT_MRRETRY, sc->status); - - /* - * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based - * on settings like the phy mode and regulatory - * domain restrictions. - */ - ret = ath5k_setup_bands(hw); - if (ret) { - ATH5K_ERR(sc, "can't get channels\n"); - goto err; - } - - /* NB: setup here so ath5k_rate_update is happy */ - if (test_bit(AR5K_MODE_11A, ah->ah_modes)) - ath5k_setcurmode(sc, AR5K_MODE_11A); - else - ath5k_setcurmode(sc, AR5K_MODE_11B); - - /* - * Allocate tx+rx descriptors and populate the lists. - */ - ret = ath5k_desc_alloc(sc, pdev); - if (ret) { - ATH5K_ERR(sc, "can't allocate descriptors\n"); - goto err; - } - - /* - * Allocate hardware transmit queues: one queue for - * beacon frames and one data queue for each QoS - * priority. Note that hw functions handle reseting - * these queues at the needed time. - */ - ret = ath5k_beaconq_setup(ah); - if (ret < 0) { - ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); - goto err_desc; - } - sc->bhalq = ret; - sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0); - if (IS_ERR(sc->cabq)) { - ATH5K_ERR(sc, "can't setup cab queue\n"); - ret = PTR_ERR(sc->cabq); - goto err_bhal; - } - - sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); - if (IS_ERR(sc->txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(sc->txq); - goto err_queues; - } - - tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); - tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); - tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); - tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); - tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); - - INIT_WORK(&sc->reset_work, ath5k_reset_work); - - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_queues; - } - - SET_IEEE80211_PERM_ADDR(hw, mac); - /* All MAC address bits matter for ACKs */ - memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN); - ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); - - regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain; - ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier); - if (ret) { - ATH5K_ERR(sc, "can't initialize regulatory system\n"); - goto err_queues; - } - - ret = ieee80211_register_hw(hw); - if (ret) { - ATH5K_ERR(sc, "can't register ieee80211 hw\n"); - goto err_queues; - } - - if (!ath_is_world_regd(regulatory)) - regulatory_hint(hw->wiphy, regulatory->alpha2); - - ath5k_init_leds(sc); - - ath5k_sysfs_register(sc); - - return 0; -err_queues: - ath5k_txq_release(sc); -err_bhal: - ath5k_hw_release_tx_queue(ah, sc->bhalq); -err_desc: - ath5k_desc_free(sc, pdev); -err: - return ret; -} - -static void -ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - /* - * NB: the order of these is important: - * o call the 802.11 layer before detaching ath5k_hw to - * insure callbacks into the driver to delete global - * key cache entries can be handled - * o reclaim the tx queue data structures after calling - * the 802.11 layer as we'll get called back to reclaim - * node state and potentially want to use them - * o to cleanup the tx queues the hal is called, so detach - * it last - * XXX: ??? detach ath5k_hw ??? - * Other than that, it's straightforward... - */ - ieee80211_unregister_hw(hw); - ath5k_desc_free(sc, pdev); - ath5k_txq_release(sc); - ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); - ath5k_unregister_leds(sc); - - ath5k_sysfs_unregister(sc); - /* - * NB: can't reclaim these until after ieee80211_ifdetach - * returns because we'll get called back to reclaim node - * state and potentially want to use them. - */ -} - - - - /********************\ * Channel/mode setup * \********************/ @@ -1163,8 +511,101 @@ ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) } } +struct ath_vif_iter_data { + const u8 *hw_macaddr; + u8 mask[ETH_ALEN]; + u8 active_mac[ETH_ALEN]; /* first active MAC */ + bool need_set_hw_addr; + bool found_active; + bool any_assoc; + enum nl80211_iftype opmode; +}; + +static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) +{ + struct ath_vif_iter_data *iter_data = data; + int i; + struct ath5k_vif *avf = (void *)vif->drv_priv; + + if (iter_data->hw_macaddr) + for (i = 0; i < ETH_ALEN; i++) + iter_data->mask[i] &= + ~(iter_data->hw_macaddr[i] ^ mac[i]); + + if (!iter_data->found_active) { + iter_data->found_active = true; + memcpy(iter_data->active_mac, mac, ETH_ALEN); + } + + if (iter_data->need_set_hw_addr && iter_data->hw_macaddr) + if (compare_ether_addr(iter_data->hw_macaddr, mac) == 0) + iter_data->need_set_hw_addr = false; + + if (!iter_data->any_assoc) { + if (avf->assoc) + iter_data->any_assoc = true; + } + + /* Calculate combined mode - when APs are active, operate in AP mode. + * Otherwise use the mode of the new interface. This can currently + * only deal with combinations of APs and STAs. Only one ad-hoc + * interfaces is allowed above. + */ + if (avf->opmode == NL80211_IFTYPE_AP) + iter_data->opmode = NL80211_IFTYPE_AP; + else + if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED) + iter_data->opmode = avf->opmode; +} + +static void ath_do_set_opmode(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + ath5k_hw_set_opmode(ah, sc->opmode); + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n", + sc->opmode, ath_opmode_to_string(sc->opmode)); +} + +void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc, + struct ieee80211_vif *vif) +{ + struct ath_common *common = ath5k_hw_common(sc->ah); + struct ath_vif_iter_data iter_data; + + /* + * Use the hardware MAC address as reference, the hardware uses it + * together with the BSSID mask when matching addresses. + */ + iter_data.hw_macaddr = common->macaddr; + memset(&iter_data.mask, 0xff, ETH_ALEN); + iter_data.found_active = false; + iter_data.need_set_hw_addr = true; + iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED; + + if (vif) + ath_vif_iter(&iter_data, vif->addr, vif); + + /* Get list of all active MAC addresses */ + ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter, + &iter_data); + memcpy(sc->bssidmask, iter_data.mask, ETH_ALEN); + + sc->opmode = iter_data.opmode; + if (sc->opmode == NL80211_IFTYPE_UNSPECIFIED) + /* Nothing active, default to station mode */ + sc->opmode = NL80211_IFTYPE_STATION; + + ath_do_set_opmode(sc); + + if (iter_data.need_set_hw_addr && iter_data.found_active) + ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac); + + if (ath5k_hw_hasbssidmask(sc->ah)) + ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); +} + static void -ath5k_mode_setup(struct ath5k_softc *sc) +ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif) { struct ath5k_hw *ah = sc->ah; u32 rfilt; @@ -1172,15 +613,9 @@ ath5k_mode_setup(struct ath5k_softc *sc) /* configure rx filter */ rfilt = sc->filter_flags; ath5k_hw_set_rx_filter(ah, rfilt); - - if (ath5k_hw_hasbssidmask(ah)) - ath5k_hw_set_bssid_mask(ah, sc->bssidmask); - - /* configure operational mode */ - ath5k_hw_set_opmode(ah, sc->opmode); - - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); + + ath5k_update_bssid_mask_and_opmode(sc, vif); } static inline int @@ -1352,13 +787,13 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, flags |= AR5K_TXDESC_RTSENA; cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value; duration = le16_to_cpu(ieee80211_rts_duration(sc->hw, - sc->vif, pktlen, info)); + info->control.vif, pktlen, info)); } if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { flags |= AR5K_TXDESC_CTSENA; cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value; duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw, - sc->vif, pktlen, info)); + info->control.vif, pktlen, info)); } ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), padsize, @@ -1391,6 +826,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, spin_lock_bh(&txq->lock); list_add_tail(&bf->list, &txq->q); + txq->txq_len++; if (txq->link == NULL) /* is this first packet? */ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); else /* no, so only link it */ @@ -1459,10 +895,13 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev) list_add_tail(&bf->list, &sc->txbuf); } - /* beacon buffer */ - bf->desc = ds; - bf->daddr = da; - sc->bbuf = bf; + /* beacon buffers */ + INIT_LIST_HEAD(&sc->bcbuf); + for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &sc->bcbuf); + } return 0; err_free: @@ -1477,11 +916,12 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) { struct ath5k_buf *bf; - ath5k_txbuf_free_skb(sc, sc->bbuf); list_for_each_entry(bf, &sc->txbuf, list) ath5k_txbuf_free_skb(sc, bf); list_for_each_entry(bf, &sc->rxbuf, list) ath5k_rxbuf_free_skb(sc, bf); + list_for_each_entry(bf, &sc->bcbuf, list) + ath5k_txbuf_free_skb(sc, bf); /* Free memory associated with all descriptors */ pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); @@ -1490,13 +930,9 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) kfree(sc->bufptr); sc->bufptr = NULL; - sc->bbuf = NULL; } - - - /**************\ * Queues setup * \**************/ @@ -1509,16 +945,18 @@ ath5k_txq_setup(struct ath5k_softc *sc, struct ath5k_txq *txq; struct ath5k_txq_info qi = { .tqi_subtype = subtype, - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT + /* XXX: default values not correct for B and XR channels, + * but who cares? */ + .tqi_aifs = AR5K_TUNE_AIFS, + .tqi_cw_min = AR5K_TUNE_CWMIN, + .tqi_cw_max = AR5K_TUNE_CWMAX }; int qnum; /* * Enable interrupts only for EOL and DESC conditions. * We mark tx descriptors to receive a DESC interrupt - * when a tx queue gets deep; otherwise waiting for the + * when a tx queue gets deep; otherwise we wait for the * EOL to reap descriptors. Note that this is done to * reduce interrupt load and this only defers reaping * descriptors, never transmitting frames. Aside from @@ -1550,6 +988,9 @@ ath5k_txq_setup(struct ath5k_softc *sc, INIT_LIST_HEAD(&txq->q); spin_lock_init(&txq->lock); txq->setup = true; + txq->txq_len = 0; + txq->txq_poll_mark = false; + txq->txq_stuck = 0; } return &sc->txqs[qnum]; } @@ -1558,9 +999,11 @@ static int ath5k_beaconq_setup(struct ath5k_hw *ah) { struct ath5k_txq_info qi = { - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT, + /* XXX: default values not correct for B and XR channels, + * but who cares? */ + .tqi_aifs = AR5K_TUNE_AIFS, + .tqi_cw_min = AR5K_TUNE_CWMIN, + .tqi_cw_max = AR5K_TUNE_CWMAX, /* NB: for dynamic turbo, don't enable any other interrupts */ .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE }; @@ -1594,7 +1037,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) */ qi.tqi_aifs = 0; qi.tqi_cw_min = 0; - qi.tqi_cw_max = 2 * ah->ah_cw_min; + qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN; } ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, @@ -1644,9 +1087,11 @@ ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) spin_lock_bh(&sc->txbuflock); list_move_tail(&bf->list, &sc->txbuf); sc->txbuf_len++; + txq->txq_len--; spin_unlock_bh(&sc->txbuflock); } txq->link = NULL; + txq->txq_poll_mark = false; spin_unlock_bh(&txq->lock); } @@ -1696,8 +1141,6 @@ ath5k_txq_release(struct ath5k_softc *sc) } - - /*************\ * RX Handling * \*************/ @@ -1713,7 +1156,7 @@ ath5k_rx_start(struct ath5k_softc *sc) struct ath5k_buf *bf; int ret; - common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz); + common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n", common->cachelsz, common->rx_bufsize); @@ -1732,7 +1175,7 @@ ath5k_rx_start(struct ath5k_softc *sc) spin_unlock_bh(&sc->rxbuflock); ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ - ath5k_mode_setup(sc); /* set filters, etc. */ + ath5k_mode_setup(sc, NULL); /* set filters, etc. */ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ return 0; @@ -1840,6 +1283,15 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, */ if (hw_tu >= sc->nexttbtt) ath5k_beacon_update_timers(sc, bc_tstamp); + + /* Check if the beacon timers are still correct, because a TSF + * update might have created a window between them - for a + * longer description see the comment of this function: */ + if (!ath5k_hw_check_beacon_timers(sc->ah, sc->bintval)) { + ath5k_beacon_update_timers(sc, bc_tstamp); + ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + "fixed beacon timers after beacon receive\n"); + } } } @@ -1863,7 +1315,7 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi) } /* - * Compute padding position. skb must contains an IEEE 802.11 frame + * Compute padding position. skb must contain an IEEE 802.11 frame */ static int ath5k_common_padpos(struct sk_buff *skb) { @@ -1882,10 +1334,9 @@ static int ath5k_common_padpos(struct sk_buff *skb) } /* - * This function expects a 802.11 frame and returns the number of - * bytes added, or -1 if we don't have enought header room. + * This function expects an 802.11 frame and returns the number of + * bytes added, or -1 if we don't have enough header room. */ - static int ath5k_add_padding(struct sk_buff *skb) { int padpos = ath5k_common_padpos(skb); @@ -1905,10 +1356,18 @@ static int ath5k_add_padding(struct sk_buff *skb) } /* - * This function expects a 802.11 frame and returns the number of - * bytes removed + * The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = 4 - (hdrlen & 3); however, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. We must not try to + * remove padding from short control frames that do not have a + * payload. + * + * This function expects an 802.11 frame and returns the number of + * bytes removed. */ - static int ath5k_remove_padding(struct sk_buff *skb) { int padpos = ath5k_common_padpos(skb); @@ -1929,14 +1388,6 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, { struct ieee80211_rx_status *rxs; - /* The MAC header is padded to have 32-bit boundary if the - * packet payload is non-zero. The general calculation for - * padsize would take into account odd header lengths: - * padsize = (4 - hdrlen % 4) % 4; However, since only - * even-length headers are used, padding can only be 0 or 2 - * bytes and we can optimize this a bit. In addition, we must - * not try to remove padding from short control frames that do - * not have payload. */ ath5k_remove_padding(skb); rxs = IEEE80211_SKB_RXCB(skb); @@ -2007,6 +1458,7 @@ static bool ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) { sc->stats.rx_all_count++; + sc->stats.rx_bytes_count += rs->rs_datalen; if (unlikely(rs->rs_status)) { if (rs->rs_status & AR5K_RXERR_CRC) @@ -2040,9 +1492,8 @@ ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) return true; } - /* let crypto-error packets fall through in MNTR */ - if ((rs->rs_status & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) || - sc->opmode != NL80211_IFTYPE_MONITOR) + /* reject any frames with non-crypto errors */ + if (rs->rs_status & ~(AR5K_RXERR_DECRYPT)) return false; } @@ -2123,6 +1574,118 @@ unlock: * TX Handling * \*************/ +static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ath5k_txq *txq) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_buf *bf; + unsigned long flags; + int padsize; + + ath5k_debug_dump_skb(sc, skb, "TX ", 1); + + /* + * The hardware expects the header padded to 4 byte boundaries. + * If this is not the case, we add the padding after the header. + */ + padsize = ath5k_add_padding(skb); + if (padsize < 0) { + ATH5K_ERR(sc, "tx hdrlen not %%4: not enough" + " headroom to pad"); + goto drop_packet; + } + + if (txq->txq_len >= ATH5K_TXQ_LEN_MAX) + ieee80211_stop_queue(hw, txq->qnum); + + spin_lock_irqsave(&sc->txbuflock, flags); + if (list_empty(&sc->txbuf)) { + ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); + spin_unlock_irqrestore(&sc->txbuflock, flags); + ieee80211_stop_queues(hw); + goto drop_packet; + } + bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); + list_del(&bf->list); + sc->txbuf_len--; + if (list_empty(&sc->txbuf)) + ieee80211_stop_queues(hw); + spin_unlock_irqrestore(&sc->txbuflock, flags); + + bf->skb = skb; + + if (ath5k_txbuf_setup(sc, bf, txq, padsize)) { + bf->skb = NULL; + spin_lock_irqsave(&sc->txbuflock, flags); + list_add_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + spin_unlock_irqrestore(&sc->txbuflock, flags); + goto drop_packet; + } + return NETDEV_TX_OK; + +drop_packet: + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +static void +ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb, + struct ath5k_tx_status *ts) +{ + struct ieee80211_tx_info *info; + int i; + + sc->stats.tx_all_count++; + sc->stats.tx_bytes_count += skb->len; + info = IEEE80211_SKB_CB(skb); + + ieee80211_tx_info_clear_status(info); + for (i = 0; i < 4; i++) { + struct ieee80211_tx_rate *r = + &info->status.rates[i]; + + if (ts->ts_rate[i]) { + r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]); + r->count = ts->ts_retry[i]; + } else { + r->idx = -1; + r->count = 0; + } + } + + /* count the successful attempt as well */ + info->status.rates[ts->ts_final_idx].count++; + + if (unlikely(ts->ts_status)) { + sc->stats.ack_fail++; + if (ts->ts_status & AR5K_TXERR_FILT) { + info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + sc->stats.txerr_filt++; + } + if (ts->ts_status & AR5K_TXERR_XRETRY) + sc->stats.txerr_retry++; + if (ts->ts_status & AR5K_TXERR_FIFO) + sc->stats.txerr_fifo++; + } else { + info->flags |= IEEE80211_TX_STAT_ACK; + info->status.ack_signal = ts->ts_rssi; + } + + /* + * Remove MAC header padding before giving the frame + * back to mac80211. + */ + ath5k_remove_padding(skb); + + if (ts->ts_antenna > 0 && ts->ts_antenna < 5) + sc->stats.antenna_tx[ts->ts_antenna]++; + else + sc->stats.antenna_tx[0]++; /* invalid */ + + ieee80211_tx_status(sc->hw, skb); +} + static void ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) { @@ -2130,96 +1693,51 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) struct ath5k_buf *bf, *bf0; struct ath5k_desc *ds; struct sk_buff *skb; - struct ieee80211_tx_info *info; - int i, ret; + int ret; spin_lock(&txq->lock); list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ds = bf->desc; - /* - * It's possible that the hardware can say the buffer is - * completed when it hasn't yet loaded the ds_link from - * host memory and moved on. If there are more TX - * descriptors in the queue, wait for TXDP to change - * before processing this one. - */ - if (ath5k_hw_get_txdp(sc->ah, txq->qnum) == bf->daddr && - !list_is_last(&bf->list, &txq->q)) - break; + txq->txq_poll_mark = false; - ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); - if (unlikely(ret == -EINPROGRESS)) - break; - else if (unlikely(ret)) { - ATH5K_ERR(sc, "error %d while processing queue %u\n", - ret, txq->qnum); - break; - } - - sc->stats.tx_all_count++; - skb = bf->skb; - info = IEEE80211_SKB_CB(skb); - bf->skb = NULL; - - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, - PCI_DMA_TODEVICE); + /* skb might already have been processed last time. */ + if (bf->skb != NULL) { + ds = bf->desc; - ieee80211_tx_info_clear_status(info); - for (i = 0; i < 4; i++) { - struct ieee80211_tx_rate *r = - &info->status.rates[i]; - - if (ts.ts_rate[i]) { - r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); - r->count = ts.ts_retry[i]; - } else { - r->idx = -1; - r->count = 0; + ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); + if (unlikely(ret == -EINPROGRESS)) + break; + else if (unlikely(ret)) { + ATH5K_ERR(sc, + "error %d while processing " + "queue %u\n", ret, txq->qnum); + break; } - } - /* count the successful attempt as well */ - info->status.rates[ts.ts_final_idx].count++; - - if (unlikely(ts.ts_status)) { - sc->stats.ack_fail++; - if (ts.ts_status & AR5K_TXERR_FILT) { - info->flags |= IEEE80211_TX_STAT_TX_FILTERED; - sc->stats.txerr_filt++; - } - if (ts.ts_status & AR5K_TXERR_XRETRY) - sc->stats.txerr_retry++; - if (ts.ts_status & AR5K_TXERR_FIFO) - sc->stats.txerr_fifo++; - } else { - info->flags |= IEEE80211_TX_STAT_ACK; - info->status.ack_signal = ts.ts_rssi; + skb = bf->skb; + bf->skb = NULL; + pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, + PCI_DMA_TODEVICE); + ath5k_tx_frame_completed(sc, skb, &ts); } /* - * Remove MAC header padding before giving the frame - * back to mac80211. + * It's possible that the hardware can say the buffer is + * completed when it hasn't yet loaded the ds_link from + * host memory and moved on. + * Always keep the last descriptor to avoid HW races... */ - ath5k_remove_padding(skb); - - if (ts.ts_antenna > 0 && ts.ts_antenna < 5) - sc->stats.antenna_tx[ts.ts_antenna]++; - else - sc->stats.antenna_tx[0]++; /* invalid */ - - ieee80211_tx_status(sc->hw, skb); - - spin_lock(&sc->txbuflock); - list_move_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock(&sc->txbuflock); + if (ath5k_hw_get_txdp(sc->ah, txq->qnum) != bf->daddr) { + spin_lock(&sc->txbuflock); + list_move_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + txq->txq_len--; + spin_unlock(&sc->txbuflock); + } } - if (likely(list_empty(&txq->q))) - txq->link = NULL; spin_unlock(&txq->lock); - if (sc->txbuf_len > ATH_TXBUF / 5) - ieee80211_wake_queues(sc->hw); + if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4) + ieee80211_wake_queue(sc->hw, txq->qnum); } static void @@ -2285,10 +1803,11 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * default antenna which is supposed to be an omni. * * Note2: On sectored scenarios it's possible to have - * multiple antennas (1omni -the default- and 14 sectors) - * so if we choose to actually support this mode we need - * to allow user to set how many antennas we have and tweak - * the code below to send beacons on all of them. + * multiple antennas (1 omni -- the default -- and 14 + * sectors), so if we choose to actually support this + * mode, we need to allow the user to set how many antennas + * we have and tweak the code below to send beacons + * on all of them. */ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP) antenna = sc->bsent & 4 ? 2 : 1; @@ -2314,6 +1833,44 @@ err_unmap: } /* + * Updates the beacon that is sent by ath5k_beacon_send. For adhoc, + * this is called only once at config_bss time, for AP we do it every + * SWBA interrupt so that the TIM will reflect buffered frames. + * + * Called with the beacon lock. + */ +static int +ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + int ret; + struct ath5k_softc *sc = hw->priv; + struct ath5k_vif *avf = (void *)vif->drv_priv; + struct sk_buff *skb; + + if (WARN_ON(!vif)) { + ret = -EINVAL; + goto out; + } + + skb = ieee80211_beacon_get(hw, vif); + + if (!skb) { + ret = -ENOMEM; + goto out; + } + + ath5k_debug_dump_skb(sc, skb, "BC ", 1); + + ath5k_txbuf_free_skb(sc, avf->bbuf); + avf->bbuf->skb = skb; + ret = ath5k_beacon_setup(sc, avf->bbuf); + if (ret) + avf->bbuf->skb = NULL; +out: + return ret; +} + +/* * Transmit a beacon frame at SWBA. Dynamic updates to the * frame contents are done as needed and the slot time is * also adjusted based on current state. @@ -2324,20 +1881,17 @@ err_unmap: static void ath5k_beacon_send(struct ath5k_softc *sc) { - struct ath5k_buf *bf = sc->bbuf; struct ath5k_hw *ah = sc->ah; + struct ieee80211_vif *vif; + struct ath5k_vif *avf; + struct ath5k_buf *bf; struct sk_buff *skb; ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n"); - if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } /* * Check if the previous beacon has gone out. If - * not don't don't try to post another, skip this + * not, don't don't try to post another: skip this * period and wait for the next. Missed beacons * indicate a problem and should not occur. If we * miss too many consecutive beacons reset the device. @@ -2363,6 +1917,28 @@ ath5k_beacon_send(struct ath5k_softc *sc) sc->bmisscount = 0; } + if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + u64 tsf = ath5k_hw_get_tsf64(ah); + u32 tsftu = TSF_TO_TU(tsf); + int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval; + vif = sc->bslot[(slot + 1) % ATH_BCBUF]; + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + "tsf %llx tsftu %x intval %u slot %u vif %p\n", + (unsigned long long)tsf, tsftu, sc->bintval, slot, vif); + } else /* only one interface */ + vif = sc->bslot[0]; + + if (!vif) + return; + + avf = (void *)vif->drv_priv; + bf = avf->bbuf; + if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || + sc->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); + return; + } + /* * Stop any current dma and put the new frame on the queue. * This should never fail since we check above that no frames @@ -2375,23 +1951,22 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* refresh the beacon for AP mode */ if (sc->opmode == NL80211_IFTYPE_AP) - ath5k_beacon_update(sc->hw, sc->vif); + ath5k_beacon_update(sc->hw, vif); ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); ath5k_hw_start_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", sc->bhalq, (unsigned long long)bf->daddr, bf->desc); - skb = ieee80211_get_buffered_bc(sc->hw, sc->vif); + skb = ieee80211_get_buffered_bc(sc->hw, vif); while (skb) { ath5k_tx_queue(sc->hw, skb, sc->cabq); - skb = ieee80211_get_buffered_bc(sc->hw, sc->vif); + skb = ieee80211_get_buffered_bc(sc->hw, vif); } sc->bsent++; } - /** * ath5k_beacon_update_timers - update beacon timers * @@ -2416,6 +1991,12 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) u64 hw_tsf; intval = sc->bintval & AR5K_BEACON_PERIOD; + if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + intval /= ATH_BCBUF; /* staggered multi-bss beacons */ + if (intval < 15) + ATH5K_WARN(sc, "intval %u is too low, min 15\n", + intval); + } if (WARN_ON(!intval)) return; @@ -2426,8 +2007,11 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) hw_tsf = ath5k_hw_get_tsf64(ah); hw_tu = TSF_TO_TU(hw_tsf); -#define FUDGE 3 - /* we use FUDGE to make sure the next TBTT is ahead of the current TU */ +#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3 + /* We use FUDGE to make sure the next TBTT is ahead of the current TU. + * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer + * configuration we need to make sure it is bigger than that. */ + if (bc_tsf == -1) { /* * no beacons received, called internally. @@ -2493,7 +2077,6 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : ""); } - /** * ath5k_beacon_config - Configure the beacon queues and interrupts * @@ -2572,155 +2155,6 @@ static void ath5k_tasklet_beacon(unsigned long data) * Interrupt handling * \********************/ -static int -ath5k_init(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - int ret, i; - - mutex_lock(&sc->lock); - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); - - /* - * Stop anything previously setup. This is safe - * no matter this is the first time through or not. - */ - ath5k_stop_locked(sc); - - /* - * The basic interface to setting the hardware in a good - * state is ``reset''. On return the hardware is known to - * be powered up and with interrupts disabled. This must - * be followed by initialization of the appropriate bits - * and then setup of the interrupt mask. - */ - sc->curchan = sc->hw->conf.channel; - sc->curband = &sc->sbands[sc->curchan->band]; - sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | - AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; - - ret = ath5k_reset(sc, NULL); - if (ret) - goto done; - - ath5k_rfkill_hw_start(ah); - - /* - * Reset the key cache since some parts do not reset the - * contents on initial power up or resume from suspend. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - - ath5k_hw_set_ack_bitrate_high(ah, true); - ret = 0; -done: - mmiowb(); - mutex_unlock(&sc->lock); - return ret; -} - -static int -ath5k_stop_locked(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", - test_bit(ATH_STAT_INVALID, sc->status)); - - /* - * Shutdown the hardware and driver: - * stop output from above - * disable interrupts - * turn off timers - * turn off the radio - * clear transmit machinery - * clear receive machinery - * drain and release tx queues - * reclaim beacon resources - * power down hardware - * - * Note that some of this work is not possible if the - * hardware is gone (invalid). - */ - ieee80211_stop_queues(sc->hw); - - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_led_off(sc); - ath5k_hw_set_imr(ah, 0); - synchronize_irq(sc->pdev->irq); - } - ath5k_txq_cleanup(sc); - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_rx_stop(sc); - ath5k_hw_phy_disable(ah); - } - - return 0; -} - -static void stop_tasklets(struct ath5k_softc *sc) -{ - tasklet_kill(&sc->rxtq); - tasklet_kill(&sc->txtq); - tasklet_kill(&sc->calib); - tasklet_kill(&sc->beacontq); - tasklet_kill(&sc->ani_tasklet); -} - -/* - * Stop the device, grabbing the top-level lock to protect - * against concurrent entry through ath5k_init (which can happen - * if another thread does a system call and the thread doing the - * stop is preempted). - */ -static int -ath5k_stop_hw(struct ath5k_softc *sc) -{ - int ret; - - mutex_lock(&sc->lock); - ret = ath5k_stop_locked(sc); - if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { - /* - * Don't set the card in full sleep mode! - * - * a) When the device is in this state it must be carefully - * woken up or references to registers in the PCI clock - * domain may freeze the bus (and system). This varies - * by chip and is mostly an issue with newer parts - * (madwifi sources mentioned srev >= 0x78) that go to - * sleep more quickly. - * - * b) On older chips full sleep results a weird behaviour - * during wakeup. I tested various cards with srev < 0x78 - * and they don't wake up after module reload, a second - * module reload is needed to bring the card up again. - * - * Until we figure out what's going on don't enable - * full chip reset on any chip (this is what Legacy HAL - * and Sam's HAL do anyway). Instead Perform a full reset - * on the device (same as initial state after attach) and - * leave it idle (keep MAC/BB on warm reset) */ - ret = ath5k_hw_on_hold(sc->ah); - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, - "putting device to sleep\n"); - } - ath5k_txbuf_free_skb(sc, sc->bbuf); - - mmiowb(); - mutex_unlock(&sc->lock); - - stop_tasklets(sc); - - ath5k_rfkill_hw_stop(sc->ah); - - return ret; -} - static void ath5k_intr_calibration_poll(struct ath5k_hw *ah) { @@ -2857,14 +2291,13 @@ ath5k_tasklet_calibrate(unsigned long data) sc->curchan->center_freq)); /* Noise floor calibration interrupts rx/tx path while I/Q calibration - * doesn't. We stop the queues so that calibration doesn't interfere - * with TX and don't run it as often */ + * doesn't. + * TODO: We should stop TX here, so that it doesn't interfere. + * Note that stopping the queues is not enough to stop TX! */ if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) { ah->ah_cal_next_nf = jiffies + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF); - ieee80211_stop_queues(sc->hw); ath5k_hw_update_noise_floor(ah); - ieee80211_wake_queues(sc->hw); } ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; @@ -2883,71 +2316,208 @@ ath5k_tasklet_ani(unsigned long data) } -/********************\ -* Mac80211 functions * -\********************/ +static void +ath5k_tx_complete_poll_work(struct work_struct *work) +{ + struct ath5k_softc *sc = container_of(work, struct ath5k_softc, + tx_complete_work.work); + struct ath5k_txq *txq; + int i; + bool needreset = false; + + for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) { + if (sc->txqs[i].setup) { + txq = &sc->txqs[i]; + spin_lock_bh(&txq->lock); + if (txq->txq_len > 1) { + if (txq->txq_poll_mark) { + ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, + "TX queue stuck %d\n", + txq->qnum); + needreset = true; + txq->txq_stuck++; + spin_unlock_bh(&txq->lock); + break; + } else { + txq->txq_poll_mark = true; + } + } + spin_unlock_bh(&txq->lock); + } + } + + if (needreset) { + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "TX queues stuck, resetting\n"); + ath5k_reset(sc, sc->curchan); + } + + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); +} + + +/*************************\ +* Initialization routines * +\*************************/ static int -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +ath5k_stop_locked(struct ath5k_softc *sc) { - struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", + test_bit(ATH_STAT_INVALID, sc->status)); + + /* + * Shutdown the hardware and driver: + * stop output from above + * disable interrupts + * turn off timers + * turn off the radio + * clear transmit machinery + * clear receive machinery + * drain and release tx queues + * reclaim beacon resources + * power down hardware + * + * Note that some of this work is not possible if the + * hardware is gone (invalid). + */ + ieee80211_stop_queues(sc->hw); - return ath5k_tx_queue(hw, skb, sc->txq); + if (!test_bit(ATH_STAT_INVALID, sc->status)) { + ath5k_led_off(sc); + ath5k_hw_set_imr(ah, 0); + synchronize_irq(sc->pdev->irq); + } + ath5k_txq_cleanup(sc); + if (!test_bit(ATH_STAT_INVALID, sc->status)) { + ath5k_rx_stop(sc); + ath5k_hw_phy_disable(ah); + } + + return 0; } -static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq) +static int +ath5k_init(struct ath5k_softc *sc) { - struct ath5k_softc *sc = hw->priv; - struct ath5k_buf *bf; - unsigned long flags; - int padsize; + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); + int ret, i; - ath5k_debug_dump_skb(sc, skb, "TX ", 1); + mutex_lock(&sc->lock); - if (sc->opmode == NL80211_IFTYPE_MONITOR) - ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n"); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); /* - * the hardware expects the header padded to 4 byte boundaries - * if this is not the case we add the padding after the header + * Stop anything previously setup. This is safe + * no matter this is the first time through or not. */ - padsize = ath5k_add_padding(skb); - if (padsize < 0) { - ATH5K_ERR(sc, "tx hdrlen not %%4: not enough" - " headroom to pad"); - goto drop_packet; - } + ath5k_stop_locked(sc); - spin_lock_irqsave(&sc->txbuflock, flags); - if (list_empty(&sc->txbuf)) { - ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); - spin_unlock_irqrestore(&sc->txbuflock, flags); - ieee80211_stop_queue(hw, skb_get_queue_mapping(skb)); - goto drop_packet; - } - bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); - list_del(&bf->list); - sc->txbuf_len--; - if (list_empty(&sc->txbuf)) - ieee80211_stop_queues(hw); - spin_unlock_irqrestore(&sc->txbuflock, flags); + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + sc->curchan = sc->hw->conf.channel; + sc->curband = &sc->sbands[sc->curchan->band]; + sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | + AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | + AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; - bf->skb = skb; + ret = ath5k_reset(sc, NULL); + if (ret) + goto done; - if (ath5k_txbuf_setup(sc, bf, txq, padsize)) { - bf->skb = NULL; - spin_lock_irqsave(&sc->txbuflock, flags); - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock_irqrestore(&sc->txbuflock, flags); - goto drop_packet; + ath5k_rfkill_hw_start(ah); + + /* + * Reset the key cache since some parts do not reset the + * contents on initial power up or resume from suspend. + */ + for (i = 0; i < common->keymax; i++) + ath_hw_keyreset(common, (u16) i); + + ath5k_hw_set_ack_bitrate_high(ah, true); + + for (i = 0; i < ARRAY_SIZE(sc->bslot); i++) + sc->bslot[i] = NULL; + + ret = 0; +done: + mmiowb(); + mutex_unlock(&sc->lock); + + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); + + return ret; +} + +static void stop_tasklets(struct ath5k_softc *sc) +{ + tasklet_kill(&sc->rxtq); + tasklet_kill(&sc->txtq); + tasklet_kill(&sc->calib); + tasklet_kill(&sc->beacontq); + tasklet_kill(&sc->ani_tasklet); +} + +/* + * Stop the device, grabbing the top-level lock to protect + * against concurrent entry through ath5k_init (which can happen + * if another thread does a system call and the thread doing the + * stop is preempted). + */ +static int +ath5k_stop_hw(struct ath5k_softc *sc) +{ + int ret; + + mutex_lock(&sc->lock); + ret = ath5k_stop_locked(sc); + if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { + /* + * Don't set the card in full sleep mode! + * + * a) When the device is in this state it must be carefully + * woken up or references to registers in the PCI clock + * domain may freeze the bus (and system). This varies + * by chip and is mostly an issue with newer parts + * (madwifi sources mentioned srev >= 0x78) that go to + * sleep more quickly. + * + * b) On older chips full sleep results a weird behaviour + * during wakeup. I tested various cards with srev < 0x78 + * and they don't wake up after module reload, a second + * module reload is needed to bring the card up again. + * + * Until we figure out what's going on don't enable + * full chip reset on any chip (this is what Legacy HAL + * and Sam's HAL do anyway). Instead Perform a full reset + * on the device (same as initial state after attach) and + * leave it idle (keep MAC/BB on warm reset) */ + ret = ath5k_hw_on_hold(sc->ah); + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "putting device to sleep\n"); } - return NETDEV_TX_OK; -drop_packet: - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + mmiowb(); + mutex_unlock(&sc->lock); + + stop_tasklets(sc); + + cancel_delayed_work_sync(&sc->tx_complete_work); + + ath5k_rfkill_hw_stop(sc->ah); + + return ret; } /* @@ -3024,6 +2594,208 @@ static void ath5k_reset_work(struct work_struct *work) mutex_unlock(&sc->lock); } +static int +ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); + struct ath5k_txq *txq; + u8 mac[ETH_ALEN] = {}; + int ret; + + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); + + /* + * Check if the MAC has multi-rate retry support. + * We do this by trying to setup a fake extended + * descriptor. MACs that don't have support will + * return false w/o doing anything. MACs that do + * support it will return true w/o doing anything. + */ + ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); + + if (ret < 0) + goto err; + if (ret > 0) + __set_bit(ATH_STAT_MRRETRY, sc->status); + + /* + * Collect the channel list. The 802.11 layer + * is resposible for filtering this list based + * on settings like the phy mode and regulatory + * domain restrictions. + */ + ret = ath5k_setup_bands(hw); + if (ret) { + ATH5K_ERR(sc, "can't get channels\n"); + goto err; + } + + /* NB: setup here so ath5k_rate_update is happy */ + if (test_bit(AR5K_MODE_11A, ah->ah_modes)) + ath5k_setcurmode(sc, AR5K_MODE_11A); + else + ath5k_setcurmode(sc, AR5K_MODE_11B); + + /* + * Allocate tx+rx descriptors and populate the lists. + */ + ret = ath5k_desc_alloc(sc, pdev); + if (ret) { + ATH5K_ERR(sc, "can't allocate descriptors\n"); + goto err; + } + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that hw functions handle resetting + * these queues at the needed time. + */ + ret = ath5k_beaconq_setup(ah); + if (ret < 0) { + ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); + goto err_desc; + } + sc->bhalq = ret; + sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0); + if (IS_ERR(sc->cabq)) { + ATH5K_ERR(sc, "can't setup cab queue\n"); + ret = PTR_ERR(sc->cabq); + goto err_bhal; + } + + /* This order matches mac80211's queue priority, so we can + * directly use the mac80211 queue number without any mapping */ + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); + if (IS_ERR(txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + hw->queues = 4; + + tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); + tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); + tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); + tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); + tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); + + INIT_WORK(&sc->reset_work, ath5k_reset_work); + INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work); + + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_queues; + } + + SET_IEEE80211_PERM_ADDR(hw, mac); + memcpy(&sc->lladdr, mac, ETH_ALEN); + /* All MAC address bits matter for ACKs */ + ath5k_update_bssid_mask_and_opmode(sc, NULL); + + regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain; + ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier); + if (ret) { + ATH5K_ERR(sc, "can't initialize regulatory system\n"); + goto err_queues; + } + + ret = ieee80211_register_hw(hw); + if (ret) { + ATH5K_ERR(sc, "can't register ieee80211 hw\n"); + goto err_queues; + } + + if (!ath_is_world_regd(regulatory)) + regulatory_hint(hw->wiphy, regulatory->alpha2); + + ath5k_init_leds(sc); + + ath5k_sysfs_register(sc); + + return 0; +err_queues: + ath5k_txq_release(sc); +err_bhal: + ath5k_hw_release_tx_queue(ah, sc->bhalq); +err_desc: + ath5k_desc_free(sc, pdev); +err: + return ret; +} + +static void +ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + + /* + * NB: the order of these is important: + * o call the 802.11 layer before detaching ath5k_hw to + * ensure callbacks into the driver to delete global + * key cache entries can be handled + * o reclaim the tx queue data structures after calling + * the 802.11 layer as we'll get called back to reclaim + * node state and potentially want to use them + * o to cleanup the tx queues the hal is called, so detach + * it last + * XXX: ??? detach ath5k_hw ??? + * Other than that, it's straightforward... + */ + ieee80211_unregister_hw(hw); + ath5k_desc_free(sc, pdev); + ath5k_txq_release(sc); + ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); + ath5k_unregister_leds(sc); + + ath5k_sysfs_unregister(sc); + /* + * NB: can't reclaim these until after ieee80211_ifdetach + * returns because we'll get called back to reclaim node + * state and potentially want to use them. + */ +} + +/********************\ +* Mac80211 functions * +\********************/ + +static int +ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct ath5k_softc *sc = hw->priv; + u16 qnum = skb_get_queue_mapping(skb); + + if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) { + dev_kfree_skb_any(skb); + return 0; + } + + return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]); +} + static int ath5k_start(struct ieee80211_hw *hw) { return ath5k_init(hw->priv); @@ -3039,32 +2811,78 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, { struct ath5k_softc *sc = hw->priv; int ret; + struct ath5k_vif *avf = (void *)vif->drv_priv; mutex_lock(&sc->lock); - if (sc->vif) { - ret = 0; + + if ((vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC) + && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) { + ret = -ELNRNG; goto end; } - sc->vif = vif; + /* Don't allow other interfaces if one ad-hoc is configured. + * TODO: Fix the problems with ad-hoc and multiple other interfaces. + * We would need to operate the HW in ad-hoc mode to allow TSF updates + * for the IBSS, but this breaks with additional AP or STA interfaces + * at the moment. */ + if (sc->num_adhoc_vifs || + (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) { + ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n"); + ret = -ELNRNG; + goto end; + } switch (vif->type) { case NL80211_IFTYPE_AP: case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_MESH_POINT: - case NL80211_IFTYPE_MONITOR: - sc->opmode = vif->type; + avf->opmode = vif->type; break; default: ret = -EOPNOTSUPP; goto end; } - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode); + sc->nvifs++; + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode); + + /* Assign the vap/adhoc to a beacon xmit slot. */ + if ((avf->opmode == NL80211_IFTYPE_AP) || + (avf->opmode == NL80211_IFTYPE_ADHOC)) { + int slot; + WARN_ON(list_empty(&sc->bcbuf)); + avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf, + list); + list_del(&avf->bbuf->list); + + avf->bslot = 0; + for (slot = 0; slot < ATH_BCBUF; slot++) { + if (!sc->bslot[slot]) { + avf->bslot = slot; + break; + } + } + BUG_ON(sc->bslot[avf->bslot] != NULL); + sc->bslot[avf->bslot] = vif; + if (avf->opmode == NL80211_IFTYPE_AP) + sc->num_ap_vifs++; + else + sc->num_adhoc_vifs++; + } + + /* Any MAC address is fine, all others are included through the + * filter. + */ + memcpy(&sc->lladdr, vif->addr, ETH_ALEN); ath5k_hw_set_lladdr(sc->ah, vif->addr); - ath5k_mode_setup(sc); + + memcpy(&avf->lladdr, vif->addr, ETH_ALEN); + + ath5k_mode_setup(sc, vif); ret = 0; end: @@ -3077,15 +2895,29 @@ ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct ath5k_softc *sc = hw->priv; - u8 mac[ETH_ALEN] = {}; + struct ath5k_vif *avf = (void *)vif->drv_priv; + unsigned int i; mutex_lock(&sc->lock); - if (sc->vif != vif) - goto end; + sc->nvifs--; + + if (avf->bbuf) { + ath5k_txbuf_free_skb(sc, avf->bbuf); + list_add_tail(&avf->bbuf->list, &sc->bcbuf); + for (i = 0; i < ATH_BCBUF; i++) { + if (sc->bslot[i] == vif) { + sc->bslot[i] = NULL; + break; + } + } + avf->bbuf = NULL; + } + if (avf->opmode == NL80211_IFTYPE_AP) + sc->num_ap_vifs--; + else if (avf->opmode == NL80211_IFTYPE_ADHOC) + sc->num_adhoc_vifs--; - ath5k_hw_set_lladdr(sc->ah, mac); - sc->vif = NULL; -end: + ath5k_update_bssid_mask_and_opmode(sc, NULL); mutex_unlock(&sc->lock); } @@ -3168,6 +3000,19 @@ static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, return ((u64)(mfilt[1]) << 32) | mfilt[0]; } +static bool ath_any_vif_assoc(struct ath5k_softc *sc) +{ + struct ath_vif_iter_data iter_data; + iter_data.hw_macaddr = NULL; + iter_data.any_assoc = false; + iter_data.need_set_hw_addr = false; + iter_data.found_active = true; + + ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter, + &iter_data); + return iter_data.any_assoc; +} + #define SUPPORTED_FIF_FLAGS \ FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ @@ -3237,9 +3082,9 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, rfilt |= AR5K_RX_FILTER_PHYERR; /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons - * and probes for any BSSID, this needs testing */ - if (*new_flags & FIF_BCN_PRBRESP_PROMISC) - rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ; + * and probes for any BSSID */ + if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1)) + rfilt |= AR5K_RX_FILTER_BEACON; /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not * set we should only pass on control frames for this @@ -3255,7 +3100,6 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, switch (sc->opmode) { case NL80211_IFTYPE_MESH_POINT: - case NL80211_IFTYPE_MONITOR: rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ | @@ -3278,7 +3122,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, /* Set multicast bits */ ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); - /* Set the cached hw filter flags, this will alter actually + /* Set the cached hw filter flags, this will later actually * be set in HW */ sc->filter_flags = rfilt; @@ -3298,17 +3142,14 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (modparam_nohwcrypt) return -EOPNOTSUPP; - if (sc->opmode == NL80211_IFTYPE_AP) - return -EOPNOTSUPP; - - switch (key->alg) { - case ALG_WEP: - case ALG_TKIP: + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + case WLAN_CIPHER_SUITE_TKIP: break; - case ALG_CCMP: - if (sc->ah->ah_aes_support) + case WLAN_CIPHER_SUITE_CCMP: + if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM) break; - return -EOPNOTSUPP; default: WARN_ON(1); @@ -3319,27 +3160,25 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, switch (cmd) { case SET_KEY: - ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, - sta ? sta->addr : NULL); - if (ret) { - ATH5K_ERR(sc, "can't set the key\n"); - goto unlock; + ret = ath_key_config(common, vif, sta, key); + if (ret >= 0) { + key->hw_key_idx = ret; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (key->cipher == WLAN_CIPHER_SUITE_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + if (key->cipher == WLAN_CIPHER_SUITE_CCMP) + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT; + ret = 0; } - __set_bit(key->keyidx, common->keymap); - key->hw_key_idx = key->keyidx; - key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV | - IEEE80211_KEY_FLAG_GENERATE_MMIC); break; case DISABLE_KEY: - ath5k_hw_reset_key(sc->ah, key->keyidx); - __clear_bit(key->keyidx, common->keymap); + ath_key_delete(common, key); break; default: ret = -EINVAL; - goto unlock; } -unlock: mmiowb(); mutex_unlock(&sc->lock); return ret; @@ -3409,43 +3248,6 @@ ath5k_reset_tsf(struct ieee80211_hw *hw) ath5k_hw_reset_tsf(sc->ah); } -/* - * Updates the beacon that is sent by ath5k_beacon_send. For adhoc, - * this is called only once at config_bss time, for AP we do it every - * SWBA interrupt so that the TIM will reflect buffered frames. - * - * Called with the beacon lock. - */ -static int -ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) -{ - int ret; - struct ath5k_softc *sc = hw->priv; - struct sk_buff *skb; - - if (WARN_ON(!vif)) { - ret = -EINVAL; - goto out; - } - - skb = ieee80211_beacon_get(hw, vif); - - if (!skb) { - ret = -ENOMEM; - goto out; - } - - ath5k_debug_dump_skb(sc, skb, "BC ", 1); - - ath5k_txbuf_free_skb(sc, sc->bbuf); - sc->bbuf->skb = skb; - ret = ath5k_beacon_setup(sc, sc->bbuf); - if (ret) - sc->bbuf->skb = NULL; -out: - return ret; -} - static void set_beacon_filter(struct ieee80211_hw *hw, bool enable) { @@ -3466,20 +3268,19 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_bss_conf *bss_conf, u32 changes) { + struct ath5k_vif *avf = (void *)vif->drv_priv; struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); unsigned long flags; mutex_lock(&sc->lock); - if (WARN_ON(sc->vif != vif)) - goto unlock; if (changes & BSS_CHANGED_BSSID) { /* Cache for later use during resets */ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); common->curaid = 0; - ath5k_hw_set_associd(ah); + ath5k_hw_set_bssid(ah); mmiowb(); } @@ -3487,7 +3288,12 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, sc->bintval = bss_conf->beacon_int; if (changes & BSS_CHANGED_ASSOC) { - sc->assoc = bss_conf->assoc; + avf->assoc = bss_conf->assoc; + if (bss_conf->assoc) + sc->assoc = bss_conf->assoc; + else + sc->assoc = ath_any_vif_assoc(sc); + if (sc->opmode == NL80211_IFTYPE_STATION) set_beacon_filter(hw, sc->assoc); ath5k_hw_set_ledstate(sc->ah, sc->assoc ? @@ -3497,7 +3303,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, "Bss Info ASSOC %d, bssid: %pM\n", bss_conf->aid, common->curbssid); common->curaid = bss_conf->aid; - ath5k_hw_set_associd(ah); + ath5k_hw_set_bssid(ah); /* Once ANI is available you would start it here */ } } @@ -3515,7 +3321,6 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, BSS_CHANGED_BEACON_INT)) ath5k_beacon_config(sc); - unlock: mutex_unlock(&sc->lock); } @@ -3551,3 +3356,399 @@ static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) ath5k_hw_set_coverage_class(sc->ah, coverage_class); mutex_unlock(&sc->lock); } + +static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq_info qi; + int ret = 0; + + if (queue >= ah->ah_capabilities.cap_queues.q_tx_num) + return 0; + + mutex_lock(&sc->lock); + + ath5k_hw_get_tx_queueprops(ah, queue, &qi); + + qi.tqi_aifs = params->aifs; + qi.tqi_cw_min = params->cw_min; + qi.tqi_cw_max = params->cw_max; + qi.tqi_burst_time = params->txop; + + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, + "Configure tx [queue %d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + queue, params->aifs, params->cw_min, + params->cw_max, params->txop); + + if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) { + ATH5K_ERR(sc, + "Unable to update hardware queue %u!\n", queue); + ret = -EIO; + } else + ath5k_hw_reset_tx_queue(ah, queue); + + mutex_unlock(&sc->lock); + + return ret; +} + +static const struct ieee80211_ops ath5k_hw_ops = { + .tx = ath5k_tx, + .start = ath5k_start, + .stop = ath5k_stop, + .add_interface = ath5k_add_interface, + .remove_interface = ath5k_remove_interface, + .config = ath5k_config, + .prepare_multicast = ath5k_prepare_multicast, + .configure_filter = ath5k_configure_filter, + .set_key = ath5k_set_key, + .get_stats = ath5k_get_stats, + .get_survey = ath5k_get_survey, + .conf_tx = ath5k_conf_tx, + .get_tsf = ath5k_get_tsf, + .set_tsf = ath5k_set_tsf, + .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, + .sw_scan_start = ath5k_sw_scan_start, + .sw_scan_complete = ath5k_sw_scan_complete, + .set_coverage_class = ath5k_set_coverage_class, +}; + +/********************\ +* PCI Initialization * +\********************/ + +static int __devinit +ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath5k_softc *sc; + struct ath_common *common; + struct ieee80211_hw *hw; + int ret; + u8 csz; + + /* + * L0s needs to be disabled on all ath5k cards. + * + * For distributions shipping with CONFIG_PCIEASPM (this will be enabled + * by default in the future in 2.6.36) this will also mean both L1 and + * L0s will be disabled when a pre 1.1 PCIe device is detected. We do + * know L1 works correctly even for all ath5k pre 1.1 PCIe devices + * though but cannot currently undue the effect of a blacklist, for + * details you can read pcie_aspm_sanity_check() and see how it adjusts + * the device link capability. + * + * It may be possible in the future to implement some PCI API to allow + * drivers to override blacklists for pre 1.1 PCIe but for now it is + * best to accept that both L0s and L1 will be disabled completely for + * distributions shipping with CONFIG_PCIEASPM rather than having this + * issue present. Motivation for adding this new API will be to help + * with power consumption for some of these devices. + */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device\n"); + goto err; + } + + /* XXX 32-bit addressing only */ + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "32-bit DMA not available\n"); + goto err_dis; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES >> 2; + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* Enable bus mastering */ + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + ret = pci_request_region(pdev, 0, "ath5k"); + if (ret) { + dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); + goto err_dis; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; + ret = -EIO; + goto err_reg; + } + + /* + * Allocate hw (mac80211 main struct) + * and hw->priv (driver private data) + */ + hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); + ret = -ENOMEM; + goto err_map; + } + + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); + + /* Initialize driver private data */ + SET_IEEE80211_DEV(hw, &pdev->dev); + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + + hw->extra_tx_headroom = 2; + hw->channel_change_time = 5000; + sc = hw->priv; + sc->hw = hw; + sc->pdev = pdev; + + /* + * Mark the device as detached to avoid processing + * interrupts until setup is complete. + */ + __set_bit(ATH_STAT_INVALID, sc->status); + + sc->iobase = mem; /* So we can unmap it on detach */ + sc->opmode = NL80211_IFTYPE_STATION; + sc->bintval = 1000; + mutex_init(&sc->lock); + spin_lock_init(&sc->rxbuflock); + spin_lock_init(&sc->txbuflock); + spin_lock_init(&sc->block); + + /* Set private data */ + pci_set_drvdata(pdev, sc); + + /* Setup interrupt handler */ + ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (ret) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_free; + } + + /* If we passed the test, malloc an ath5k_hw struct */ + sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); + if (!sc->ah) { + ret = -ENOMEM; + ATH5K_ERR(sc, "out of memory\n"); + goto err_irq; + } + + sc->ah->ah_sc = sc; + sc->ah->ah_iobase = sc->iobase; + common = ath5k_hw_common(sc->ah); + common->ops = &ath5k_common_ops; + common->ah = sc->ah; + common->hw = hw; + common->cachelsz = csz << 2; /* convert to bytes */ + + /* Initialize device */ + ret = ath5k_hw_attach(sc); + if (ret) { + goto err_free_ah; + } + + /* set up multi-rate retry capabilities */ + if (sc->ah->ah_version == AR5K_AR5212) { + hw->max_rates = 4; + hw->max_rate_tries = 11; + } + + hw->vif_data_size = sizeof(struct ath5k_vif); + + /* Finish private driver data initialization */ + ret = ath5k_attach(pdev, hw); + if (ret) + goto err_ah; + + ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", + ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), + sc->ah->ah_mac_srev, + sc->ah->ah_phy_revision); + + if (!sc->ah->ah_single_chip) { + /* Single chip radio (!RF5111) */ + if (sc->ah->ah_radio_5ghz_revision && + !sc->ah->ah_radio_2ghz_revision) { + /* No 5GHz support -> report 2GHz radio */ + if (!test_bit(AR5K_MODE_11A, + sc->ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* No 2GHz support (5110 and some + * 5Ghz only cards) -> report 5Ghz radio */ + } else if (!test_bit(AR5K_MODE_11B, + sc->ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* Multiband radio */ + } else { + ATH5K_INFO(sc, "RF%s multiband radio found" + " (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + } + } + /* Multi chip radio (RF5111 - RF2111) -> + * report both 2GHz/5GHz radios */ + else if (sc->ah->ah_radio_5ghz_revision && + sc->ah->ah_radio_2ghz_revision){ + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_2ghz_revision), + sc->ah->ah_radio_2ghz_revision); + } + } + + ath5k_debug_init_device(sc); + + /* ready to process interrupts */ + __clear_bit(ATH_STAT_INVALID, sc->status); + + return 0; +err_ah: + ath5k_hw_detach(sc->ah); +err_free_ah: + kfree(sc->ah); +err_irq: + free_irq(pdev->irq, sc); +err_free: + ieee80211_free_hw(hw); +err_map: + pci_iounmap(pdev, mem); +err_reg: + pci_release_region(pdev, 0); +err_dis: + pci_disable_device(pdev); +err: + return ret; +} + +static void __devexit +ath5k_pci_remove(struct pci_dev *pdev) +{ + struct ath5k_softc *sc = pci_get_drvdata(pdev); + + ath5k_debug_finish_device(sc); + ath5k_detach(pdev, sc->hw); + ath5k_hw_detach(sc->ah); + kfree(sc->ah); + free_irq(pdev->irq, sc); + pci_iounmap(pdev, sc->iobase); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(sc->hw); +} + +#ifdef CONFIG_PM_SLEEP +static int ath5k_pci_suspend(struct device *dev) +{ + struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); + + ath5k_led_off(sc); + return 0; +} + +static int ath5k_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ath5k_softc *sc = pci_get_drvdata(pdev); + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_write_config_byte(pdev, 0x41, 0); + + ath5k_led_enable(sc); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); +#define ATH5K_PM_OPS (&ath5k_pm_ops) +#else +#define ATH5K_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct pci_driver ath5k_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ath5k_pci_id_table, + .probe = ath5k_pci_probe, + .remove = __devexit_p(ath5k_pci_remove), + .driver.pm = ATH5K_PM_OPS, +}; + +/* + * Module init/exit functions + */ +static int __init +init_ath5k_pci(void) +{ + int ret; + + ret = pci_register_driver(&ath5k_pci_driver); + if (ret) { + printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); + return ret; + } + + return 0; +} + +static void __exit +exit_ath5k_pci(void) +{ + pci_unregister_driver(&ath5k_pci_driver); +} + +module_init(init_ath5k_pci); +module_exit(exit_ath5k_pci); diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index dc1241f9c4e8..9a79773cdc2a 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -58,7 +58,9 @@ #define ATH_RXBUF 40 /* number of RX buffers */ #define ATH_TXBUF 200 /* number of TX buffers */ -#define ATH_BCBUF 1 /* number of beacon buffers */ +#define ATH_BCBUF 4 /* number of beacon buffers */ +#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ +#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ struct ath5k_buf { struct list_head list; @@ -83,6 +85,9 @@ struct ath5k_txq { struct list_head q; /* transmit queue */ spinlock_t lock; /* lock on q and link */ bool setup; + int txq_len; /* number of queued buffers */ + bool txq_poll_mark; + unsigned int txq_stuck; /* informational counter */ }; #define ATH5K_LED_MAX_NAME_LEN 31 @@ -116,6 +121,13 @@ struct ath5k_statistics { /* frame errors */ unsigned int rx_all_count; /* all RX frames, including errors */ unsigned int tx_all_count; /* all TX frames, including errors */ + unsigned int rx_bytes_count; /* all RX bytes, including errored pks + * and the MAC headers for each packet + */ + unsigned int tx_bytes_count; /* all TX bytes, including errored pkts + * and the MAC headers and padding for + * each packet. + */ unsigned int rxerr_crc; unsigned int rxerr_phy; unsigned int rxerr_phy_code[32]; @@ -146,6 +158,14 @@ struct ath5k_statistics { #define ATH_CHAN_MAX (14+14+14+252+20) #endif +struct ath5k_vif { + bool assoc; /* are we associated or not */ + enum nl80211_iftype opmode; + int bslot; + struct ath5k_buf *bbuf; /* beacon buffer */ + u8 lladdr[ETH_ALEN]; +}; + /* Software Carrier, keeps track of the driver state * associated with an instance of a device */ struct ath5k_softc { @@ -182,10 +202,11 @@ struct ath5k_softc { unsigned int curmode; /* current phy mode */ struct ieee80211_channel *curchan; /* current h/w channel */ - struct ieee80211_vif *vif; + u16 nvifs; enum ath5k_int imask; /* interrupt mask copy */ + u8 lladdr[ETH_ALEN]; u8 bssidmask[ETH_ALEN]; unsigned int led_pin, /* GPIO pin for driving LED */ @@ -204,7 +225,6 @@ struct ath5k_softc { spinlock_t txbuflock; unsigned int txbuf_len; /* buf count in txbuf list */ struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ - struct ath5k_txq *txq; /* main tx queue */ struct tasklet_struct txtq; /* tx intr tasklet */ struct ath5k_led tx_led; /* tx led */ @@ -214,7 +234,10 @@ struct ath5k_softc { spinlock_t block; /* protects beacon */ struct tasklet_struct beacontq; /* beacon intr tasklet */ - struct ath5k_buf *bbuf; /* beacon buffer */ + struct list_head bcbuf; /* beacon buffer */ + struct ieee80211_vif *bslot[ATH_BCBUF]; + u16 num_ap_vifs; + u16 num_adhoc_vifs; unsigned int bhalq, /* SW q for outgoing beacons */ bmisscount, /* missed beacon transmits */ bintval, /* beacon interval in TU */ @@ -230,6 +253,8 @@ struct ath5k_softc { struct ath5k_ani_state ani_state; struct tasklet_struct ani_tasklet; /* ANI calibration */ + + struct delayed_work tx_complete_work; }; #define ath5k_hw_hasbssidmask(_ah) \ diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 4cccc29964f6..acda56ee521b 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -60,6 +60,7 @@ #include "base.h" #include "debug.h" +#include "../debug.h" static unsigned int ath5k_debug; module_param_named(debug, ath5k_debug, uint, 0); @@ -71,8 +72,6 @@ module_param_named(debug, ath5k_debug, uint, 0); #include "reg.h" #include "ani.h" -static struct dentry *ath5k_global_debugfs; - static int ath5k_debugfs_open(struct inode *inode, struct file *file) { file->private_data = inode->i_private; @@ -271,6 +270,7 @@ static const struct file_operations fops_beacon = { .write = write_file_beacon, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -290,6 +290,7 @@ static const struct file_operations fops_reset = { .write = write_file_reset, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = noop_llseek, }; @@ -312,6 +313,7 @@ static const struct { { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, { ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" }, + { ATH5K_DEBUG_DESC, "desc", "descriptor chains" }, { ATH5K_DEBUG_ANY, "all", "show all debug levels" }, }; @@ -369,6 +371,7 @@ static const struct file_operations fops_debug = { .write = write_file_debug, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -480,6 +483,61 @@ static const struct file_operations fops_antenna = { .write = write_file_antenna, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +/* debugfs: misc */ + +static ssize_t read_file_misc(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + char buf[700]; + unsigned int len = 0; + u32 filt = ath5k_hw_get_rx_filter(sc->ah); + + len += snprintf(buf+len, sizeof(buf)-len, "bssid-mask: %pM\n", + sc->bssidmask); + len += snprintf(buf+len, sizeof(buf)-len, "filter-flags: 0x%x ", + filt); + if (filt & AR5K_RX_FILTER_UCAST) + len += snprintf(buf+len, sizeof(buf)-len, " UCAST"); + if (filt & AR5K_RX_FILTER_MCAST) + len += snprintf(buf+len, sizeof(buf)-len, " MCAST"); + if (filt & AR5K_RX_FILTER_BCAST) + len += snprintf(buf+len, sizeof(buf)-len, " BCAST"); + if (filt & AR5K_RX_FILTER_CONTROL) + len += snprintf(buf+len, sizeof(buf)-len, " CONTROL"); + if (filt & AR5K_RX_FILTER_BEACON) + len += snprintf(buf+len, sizeof(buf)-len, " BEACON"); + if (filt & AR5K_RX_FILTER_PROM) + len += snprintf(buf+len, sizeof(buf)-len, " PROM"); + if (filt & AR5K_RX_FILTER_XRPOLL) + len += snprintf(buf+len, sizeof(buf)-len, " XRPOLL"); + if (filt & AR5K_RX_FILTER_PROBEREQ) + len += snprintf(buf+len, sizeof(buf)-len, " PROBEREQ"); + if (filt & AR5K_RX_FILTER_PHYERR_5212) + len += snprintf(buf+len, sizeof(buf)-len, " PHYERR-5212"); + if (filt & AR5K_RX_FILTER_RADARERR_5212) + len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5212"); + if (filt & AR5K_RX_FILTER_PHYERR_5211) + snprintf(buf+len, sizeof(buf)-len, " PHYERR-5211"); + if (filt & AR5K_RX_FILTER_RADARERR_5211) + len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5211"); + + len += snprintf(buf+len, sizeof(buf)-len, "\nopmode: %s (%d)\n", + ath_opmode_to_string(sc->opmode), sc->opmode); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static const struct file_operations fops_misc = { + .read = read_file_misc, + .open = ath5k_debugfs_open, + .owner = THIS_MODULE, }; @@ -533,6 +591,8 @@ static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf, st->rxerr_jumbo*100/st->rx_all_count : 0); len += snprintf(buf+len, sizeof(buf)-len, "[RX all\t%d]\n", st->rx_all_count); + len += snprintf(buf+len, sizeof(buf)-len, "RX-all-bytes\t%d\n", + st->rx_bytes_count); len += snprintf(buf+len, sizeof(buf)-len, "\nTX\n---------------------\n"); @@ -550,6 +610,8 @@ static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf, st->txerr_filt*100/st->tx_all_count : 0); len += snprintf(buf+len, sizeof(buf)-len, "[TX all\t%d]\n", st->tx_all_count); + len += snprintf(buf+len, sizeof(buf)-len, "TX-all-bytes\t%d\n", + st->tx_bytes_count); if (len > sizeof(buf)) len = sizeof(buf); @@ -591,6 +653,7 @@ static const struct file_operations fops_frameerrors = { .write = write_file_frameerrors, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -657,20 +720,21 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf, len += snprintf(buf+len, sizeof(buf)-len, "beacon RSSI average:\t%d\n", sc->ah->ah_beacon_rssi_avg.avg); + +#define CC_PRINT(_struct, _field) \ + _struct._field, \ + _struct.cycles > 0 ? \ + _struct._field*100/_struct.cycles : 0 + len += snprintf(buf+len, sizeof(buf)-len, "profcnt tx\t\t%u\t(%d%%)\n", - as->pfc_tx, - as->pfc_cycles > 0 ? - as->pfc_tx*100/as->pfc_cycles : 0); + CC_PRINT(as->last_cc, tx_frame)); len += snprintf(buf+len, sizeof(buf)-len, "profcnt rx\t\t%u\t(%d%%)\n", - as->pfc_rx, - as->pfc_cycles > 0 ? - as->pfc_rx*100/as->pfc_cycles : 0); + CC_PRINT(as->last_cc, rx_frame)); len += snprintf(buf+len, sizeof(buf)-len, "profcnt busy\t\t%u\t(%d%%)\n", - as->pfc_busy, - as->pfc_cycles > 0 ? - as->pfc_busy*100/as->pfc_cycles : 0); + CC_PRINT(as->last_cc, rx_busy)); +#undef CC_PRINT len += snprintf(buf+len, sizeof(buf)-len, "profcnt cycles\t\t%u\n", - as->pfc_cycles); + as->last_cc.cycles); len += snprintf(buf+len, sizeof(buf)-len, "listen time\t\t%d\tlast: %d\n", as->listen_time, as->last_listen); @@ -748,6 +812,7 @@ static const struct file_operations fops_ani = { .write = write_file_ani, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -762,7 +827,7 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, struct ath5k_txq *txq; struct ath5k_buf *bf, *bf0; - int i, n = 0; + int i, n; len += snprintf(buf+len, sizeof(buf)-len, "available txbuffers: %d\n", sc->txbuf_len); @@ -776,9 +841,16 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, if (!txq->setup) continue; + n = 0; + spin_lock_bh(&txq->lock); list_for_each_entry_safe(bf, bf0, &txq->q, list) n++; - len += snprintf(buf+len, sizeof(buf)-len, " len: %d\n", n); + spin_unlock_bh(&txq->lock); + + len += snprintf(buf+len, sizeof(buf)-len, + " len: %d bufs: %d\n", txq->txq_len, n); + len += snprintf(buf+len, sizeof(buf)-len, + " stuck: %d\n", txq->txq_stuck); } if (len > sizeof(buf)) @@ -811,24 +883,17 @@ static const struct file_operations fops_queue = { .write = write_file_queue, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; -/* init */ - -void -ath5k_debug_init(void) -{ - ath5k_global_debugfs = debugfs_create_dir("ath5k", NULL); -} - void ath5k_debug_init_device(struct ath5k_softc *sc) { sc->debug.level = ath5k_debug; - sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), - ath5k_global_debugfs); + sc->debug.debugfs_phydir = debugfs_create_dir("ath5k", + sc->hw->wiphy->debugfsdir); sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUSR, @@ -848,6 +913,10 @@ ath5k_debug_init_device(struct ath5k_softc *sc) S_IWUSR | S_IRUSR, sc->debug.debugfs_phydir, sc, &fops_antenna); + sc->debug.debugfs_misc = debugfs_create_file("misc", + S_IRUSR, + sc->debug.debugfs_phydir, sc, &fops_misc); + sc->debug.debugfs_frameerrors = debugfs_create_file("frameerrors", S_IWUSR | S_IRUSR, sc->debug.debugfs_phydir, sc, @@ -865,12 +934,6 @@ ath5k_debug_init_device(struct ath5k_softc *sc) } void -ath5k_debug_finish(void) -{ - debugfs_remove(ath5k_global_debugfs); -} - -void ath5k_debug_finish_device(struct ath5k_softc *sc) { debugfs_remove(sc->debug.debugfs_debug); @@ -878,6 +941,7 @@ ath5k_debug_finish_device(struct ath5k_softc *sc) debugfs_remove(sc->debug.debugfs_beacon); debugfs_remove(sc->debug.debugfs_reset); debugfs_remove(sc->debug.debugfs_antenna); + debugfs_remove(sc->debug.debugfs_misc); debugfs_remove(sc->debug.debugfs_frameerrors); debugfs_remove(sc->debug.debugfs_ani); debugfs_remove(sc->debug.debugfs_queue); @@ -955,7 +1019,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) struct ath5k_rx_status rs = {}; int status; - if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET))) + if (likely(!(sc->debug.level & ATH5K_DEBUG_DESC))) return; printk(KERN_DEBUG "rxdp %x, rxlink %p\n", @@ -997,7 +1061,7 @@ ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) struct ath5k_tx_status ts = {}; int done; - if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET))) + if (likely(!(sc->debug.level & ATH5K_DEBUG_DESC))) return; done = sc->ah->ah_proc_tx_desc(sc->ah, bf->desc, &ts); diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h index 606ae94a9157..236edbd2507d 100644 --- a/drivers/net/wireless/ath/ath5k/debug.h +++ b/drivers/net/wireless/ath/ath5k/debug.h @@ -75,6 +75,7 @@ struct ath5k_dbg_info { struct dentry *debugfs_beacon; struct dentry *debugfs_reset; struct dentry *debugfs_antenna; + struct dentry *debugfs_misc; struct dentry *debugfs_frameerrors; struct dentry *debugfs_ani; struct dentry *debugfs_queue; @@ -95,6 +96,7 @@ struct ath5k_dbg_info { * @ATH5K_DEBUG_DUMP_TX: print transmit skb content * @ATH5K_DEBUG_DUMPBANDS: dump bands * @ATH5K_DEBUG_TRACE: trace function calls + * @ATH5K_DEBUG_DESC: descriptor setup * @ATH5K_DEBUG_ANY: show at any debug level * * The debug level is used to control the amount and type of debugging output @@ -117,6 +119,7 @@ enum ath5k_debug_level { ATH5K_DEBUG_DUMP_TX = 0x00000200, ATH5K_DEBUG_DUMPBANDS = 0x00000400, ATH5K_DEBUG_ANI = 0x00002000, + ATH5K_DEBUG_DESC = 0x00004000, ATH5K_DEBUG_ANY = 0xffffffff }; @@ -135,15 +138,9 @@ enum ath5k_debug_level { } while (0) void -ath5k_debug_init(void); - -void ath5k_debug_init_device(struct ath5k_softc *sc); void -ath5k_debug_finish(void); - -void ath5k_debug_finish_device(struct ath5k_softc *sc); void @@ -171,15 +168,9 @@ ATH5K_DBG_UNLIMIT(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) {} static inline void -ath5k_debug_init(void) {} - -static inline void ath5k_debug_init_device(struct ath5k_softc *sc) {} static inline void -ath5k_debug_finish(void) {} - -static inline void ath5k_debug_finish_device(struct ath5k_softc *sc) {} static inline void diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 484f31870ba8..923c9ca5c4f0 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -244,7 +244,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Force channel idle high */ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, - AR5K_DIAG_SW_CHANEL_IDLE_HIGH); + AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); /* Wait a while and disable mechanism */ udelay(200); @@ -261,7 +261,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) } while (--i && pending); AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, - AR5K_DIAG_SW_CHANEL_IDLE_HIGH); + AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); } /* Clear register */ @@ -377,11 +377,11 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) * * This function increases/decreases the tx trigger level for the tx fifo * buffer (aka FIFO threshold) that is used to indicate when PCU flushes - * the buffer and transmits it's data. Lowering this results sending small + * the buffer and transmits its data. Lowering this results sending small * frames more quickly but can lead to tx underruns, raising it a lot can * result other problems (i think bmiss is related). Right now we start with * the lowest possible (64Bytes) and if we get tx underrun we increase it using - * the increase flag. Returns -EIO if we have have reached maximum/minimum. + * the increase flag. Returns -EIO if we have reached maximum/minimum. * * XXX: Link this with tx DMA size ? * XXX: Use it to save interrupts ? diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index ae316fec4a6a..39722dd73e43 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -661,7 +661,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC * steps that match with the power values we read from eeprom. On * older eeprom versions (< 3.2) these steps are equaly spaced at - * 10% of the pcdac curve -until the curve reaches it's maximum- + * 10% of the pcdac curve -until the curve reaches its maximum- * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) * these 11 steps are spaced in a different way. This function returns * the pcdac steps based on eeprom version and curve min/max so that we @@ -1113,7 +1113,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) */ /* For RF2413 power calibration data doesn't start on a fixed location and - * if a mode is not supported, it's section is missing -not zeroed-. + * if a mode is not supported, its section is missing -not zeroed-. * So we need to calculate the starting offset for each section by using * these two functions */ diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 86fdb6ddfaaa..074b4c644399 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -137,11 +137,11 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) * ath5k_hw_set_ack_bitrate - set bitrate for ACKs * * @ah: The &struct ath5k_hw - * @high: Flag to determine if we want to use high transmition rate + * @high: Flag to determine if we want to use high transmission rate * for ACKs or not * * If high flag is set, we tell hw to use a set of control rates based on - * the current transmition rate (check out control_rates array inside reset.c). + * the current transmission rate (check out control_rates array inside reset.c). * If not hw just uses the lowest rate available for the current modulation * scheme being used (1Mbit for CCK and 6Mbits for OFDM). */ @@ -207,7 +207,8 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) */ unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) { - return usec * ath5k_hw_get_clockrate(ah); + struct ath_common *common = ath5k_hw_common(ah); + return usec * common->clockrate; } /** @@ -216,17 +217,19 @@ unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) */ unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) { - return clock / ath5k_hw_get_clockrate(ah); + struct ath_common *common = ath5k_hw_common(ah); + return clock / common->clockrate; } /** - * ath5k_hw_get_clockrate - Get the clock rate for current mode + * ath5k_hw_set_clockrate - Set common->clockrate for the current channel * * @ah: The &struct ath5k_hw */ -unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah) +void ath5k_hw_set_clockrate(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; + struct ath_common *common = ath5k_hw_common(ah); int clock; if (channel->hw_value & CHANNEL_5GHZ) @@ -240,7 +243,7 @@ unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah) if (channel->hw_value & CHANNEL_TURBO) clock *= 2; - return clock; + common->clockrate = clock; } /** @@ -308,27 +311,26 @@ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) } /** - * ath5k_hw_set_associd - Set BSSID for association + * ath5k_hw_set_bssid - Set current BSSID on hw * * @ah: The &struct ath5k_hw - * @bssid: BSSID - * @assoc_id: Assoc id * - * Sets the BSSID which trigers the "SME Join" operation + * Sets the current BSSID and BSSID mask we have from the + * common struct into the hardware */ -void ath5k_hw_set_associd(struct ath5k_hw *ah) +void ath5k_hw_set_bssid(struct ath5k_hw *ah) { struct ath_common *common = ath5k_hw_common(ah); u16 tim_offset = 0; /* - * Set simple BSSID mask on 5212 + * Set BSSID mask on 5212 */ if (ah->ah_version == AR5K_AR5212) ath_hw_setbssidmask(common); /* - * Set BSSID which triggers the "SME Join" operation + * Set BSSID */ ath5k_hw_reg_write(ah, get_unaligned_le32(common->curbssid), @@ -496,6 +498,10 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) { u32 tsf_lower, tsf_upper1, tsf_upper2; int i; + unsigned long flags; + + /* This code is time critical - we don't want to be interrupted here */ + local_irq_save(flags); /* * While reading TSF upper and then lower part, the clock is still @@ -518,6 +524,8 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) tsf_upper1 = tsf_upper2; } + local_irq_restore(flags); + WARN_ON( i == ATH5K_MAX_TSF_READ ); return (((u64)tsf_upper1 << 32) | tsf_lower); @@ -601,7 +609,7 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* Timer3 marks the end of our ATIM window * a zero length window is not allowed because * we 'll get no beacons */ - timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); + timer3 = next_beacon + 1; /* * Set the beacon register and enable all timers. @@ -641,198 +649,95 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) } - -/*********************\ -* Key table functions * -\*********************/ - -/* - * Reset a key entry on the table +/** + * ath5k_check_timer_win - Check if timer B is timer A + window + * + * @a: timer a (before b) + * @b: timer b (after a) + * @window: difference between a and b + * @intval: timers are increased by this interval + * + * This helper function checks if timer B is timer A + window and covers + * cases where timer A or B might have already been updated or wrapped + * around (Timers are 16 bit). + * + * Returns true if O.K. */ -int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +static inline bool +ath5k_check_timer_win(int a, int b, int window, int intval) { - unsigned int i, type; - u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; - - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry)); - - for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); - - /* Reset associated MIC entry if TKIP - * is enabled located at offset (entry + 64) */ - if (type == AR5K_KEYTABLE_TYPE_TKIP) { - AR5K_ASSERT_ENTRY(micentry, AR5K_KEYTABLE_SIZE); - for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++) - ath5k_hw_reg_write(ah, 0, - AR5K_KEYTABLE_OFF(micentry, i)); - } - /* - * Set NULL encryption on AR5212+ - * - * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) - * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 - * - * Note2: Windows driver (ndiswrapper) sets this to - * 0x00000714 instead of 0x00000007 + * 1.) usually B should be A + window + * 2.) A already updated, B not updated yet + * 3.) A already updated and has wrapped around + * 4.) B has wrapped around */ - if (ah->ah_version >= AR5K_AR5211) { - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(entry)); - - if (type == AR5K_KEYTABLE_TYPE_TKIP) { - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(micentry)); - } - } - - return 0; + if ((b - a == window) || /* 1.) */ + (a - b == intval - window) || /* 2.) */ + ((a | 0x10000) - b == intval - window) || /* 3.) */ + ((b | 0x10000) - a == window)) /* 4.) */ + return true; /* O.K. */ + return false; } -static -int ath5k_keycache_type(const struct ieee80211_key_conf *key) -{ - switch (key->alg) { - case ALG_TKIP: - return AR5K_KEYTABLE_TYPE_TKIP; - case ALG_CCMP: - return AR5K_KEYTABLE_TYPE_CCM; - case ALG_WEP: - if (key->keylen == WLAN_KEY_LEN_WEP40) - return AR5K_KEYTABLE_TYPE_40; - else if (key->keylen == WLAN_KEY_LEN_WEP104) - return AR5K_KEYTABLE_TYPE_104; - return -EINVAL; - default: - return -EINVAL; - } - return -EINVAL; -} - -/* - * Set a key entry on the table +/** + * ath5k_hw_check_beacon_timers - Check if the beacon timers are correct + * + * @ah: The &struct ath5k_hw + * @intval: beacon interval + * + * This is a workaround for IBSS mode: + * + * The need for this function arises from the fact that we have 4 separate + * HW timer registers (TIMER0 - TIMER3), which are closely related to the + * next beacon target time (NBTT), and that the HW updates these timers + * seperately based on the current TSF value. The hardware increments each + * timer by the beacon interval, when the local TSF coverted to TU is equal + * to the value stored in the timer. + * + * The reception of a beacon with the same BSSID can update the local HW TSF + * at any time - this is something we can't avoid. If the TSF jumps to a + * time which is later than the time stored in a timer, this timer will not + * be updated until the TSF in TU wraps around at 16 bit (the size of the + * timers) and reaches the time which is stored in the timer. + * + * The problem is that these timers are closely related to TIMER0 (NBTT) and + * that they define a time "window". When the TSF jumps between two timers + * (e.g. ATIM and NBTT), the one in the past will be left behind (not + * updated), while the one in the future will be updated every beacon + * interval. This causes the window to get larger, until the TSF wraps + * around as described above and the timer which was left behind gets + * updated again. But - because the beacon interval is usually not an exact + * divisor of the size of the timers (16 bit), an unwanted "window" between + * these timers has developed! + * + * This is especially important with the ATIM window, because during + * the ATIM window only ATIM frames and no data frames are allowed to be + * sent, which creates transmission pauses after each beacon. This symptom + * has been described as "ramping ping" because ping times increase linearly + * for some time and then drop down again. A wrong window on the DMA beacon + * timer has the same effect, so we check for these two conditions. + * + * Returns true if O.K. */ -int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, - const struct ieee80211_key_conf *key, const u8 *mac) -{ - unsigned int i; - int keylen; - __le32 key_v[5] = {}; - __le32 key0 = 0, key1 = 0; - __le32 *rxmic, *txmic; - int keytype; - u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; - bool is_tkip; - const u8 *key_ptr; - - is_tkip = (key->alg == ALG_TKIP); - - /* - * key->keylen comes in from mac80211 in bytes. - * TKIP is 128 bit + 128 bit mic - */ - keylen = (is_tkip) ? (128 / 8) : key->keylen; - - if (entry > AR5K_KEYTABLE_SIZE || - (is_tkip && micentry > AR5K_KEYTABLE_SIZE)) - return -EOPNOTSUPP; - - if (unlikely(keylen > 16)) - return -EOPNOTSUPP; - - keytype = ath5k_keycache_type(key); - if (keytype < 0) - return keytype; - - /* - * each key block is 6 bytes wide, written as pairs of - * alternating 32 and 16 bit le values. - */ - key_ptr = key->key; - for (i = 0; keylen >= 6; keylen -= 6) { - memcpy(&key_v[i], key_ptr, 6); - i += 2; - key_ptr += 6; - } - if (keylen) - memcpy(&key_v[i], key_ptr, keylen); - - /* intentionally corrupt key until mic is installed */ - if (is_tkip) { - key0 = key_v[0] = ~key_v[0]; - key1 = key_v[1] = ~key_v[1]; - } - - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(entry, i)); - - ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); - - if (is_tkip) { - /* Install rx/tx MIC */ - rxmic = (__le32 *) &key->key[16]; - txmic = (__le32 *) &key->key[24]; - - if (ah->ah_combined_mic) { - key_v[0] = rxmic[0]; - key_v[1] = cpu_to_le32(le32_to_cpu(txmic[0]) >> 16); - key_v[2] = rxmic[1]; - key_v[3] = cpu_to_le32(le32_to_cpu(txmic[0]) & 0xffff); - key_v[4] = txmic[1]; - } else { - key_v[0] = rxmic[0]; - key_v[1] = 0; - key_v[2] = rxmic[1]; - key_v[3] = 0; - key_v[4] = 0; - } - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(micentry, i)); - - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(micentry)); - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC0(micentry)); - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC1(micentry)); - - /* restore first 2 words of key */ - ath5k_hw_reg_write(ah, le32_to_cpu(~key0), - AR5K_KEYTABLE_OFF(entry, 0)); - ath5k_hw_reg_write(ah, le32_to_cpu(~key1), - AR5K_KEYTABLE_OFF(entry, 1)); - } - - return ath5k_hw_set_key_lladdr(ah, entry, mac); -} - -int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) +bool +ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) { - u32 low_id, high_id; - - /* Invalid entry (key table overflow) */ - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + unsigned int nbtt, atim, dma; - /* - * MAC may be NULL if it's a broadcast key. In this case no need to - * to compute get_unaligned_le32 and get_unaligned_le16 as we - * already know it. - */ - if (!mac) { - low_id = 0xffffffff; - high_id = 0xffff | AR5K_KEYTABLE_VALID; - } else { - low_id = get_unaligned_le32(mac); - high_id = get_unaligned_le16(mac + 4) | AR5K_KEYTABLE_VALID; - } + nbtt = ath5k_hw_reg_read(ah, AR5K_TIMER0); + atim = ath5k_hw_reg_read(ah, AR5K_TIMER3); + dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3; - ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); - ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); + /* NOTE: SWBA is different. Having a wrong window there does not + * stop us from sending data and this condition is catched thru + * other means (SWBA interrupt) */ - return 0; + if (ath5k_check_timer_win(nbtt, atim, 1, intval) && + ath5k_check_timer_win(dma, nbtt, AR5K_TUNE_DMA_BEACON_RESP, + intval)) + return true; /* O.K. */ + return false; } /** diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 6284c389ba18..219367884e64 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -115,7 +115,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, \**********************/ /* - * This code is used to optimize rf gain on different environments + * This code is used to optimize RF gain on different environments * (temperature mostly) based on feedback from a power detector. * * It's only used on RF5111 and RF5112, later RF chips seem to have @@ -302,7 +302,7 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) } /* Perform gain_F adjustment by choosing the right set - * of parameters from rf gain optimization ladder */ + * of parameters from RF gain optimization ladder */ static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) { const struct ath5k_gain_opt *go; @@ -367,7 +367,7 @@ done: return ret; } -/* Main callback for thermal rf gain calibration engine +/* Main callback for thermal RF gain calibration engine * Check for a new gain reading and schedule an adjustment * if needed. * @@ -433,7 +433,7 @@ done: return ah->ah_gain.g_state; } -/* Write initial rf gain table to set the RF sensitivity +/* Write initial RF gain table to set the RF sensitivity * this one works on all RF chips and has nothing to do * with gain_F calibration */ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) @@ -496,7 +496,7 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) /* - * Setup RF registers by writing rf buffer on hw + * Setup RF registers by writing RF buffer on hw */ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode) @@ -571,7 +571,7 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EINVAL; } - /* If it's the first time we set rf buffer, allocate + /* If it's the first time we set RF buffer, allocate * ah->ah_rf_banks based on ah->ah_rf_banks_size * we set above */ if (ah->ah_rf_banks == NULL) { @@ -1093,6 +1093,7 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) ah->ah_current_channel = channel; ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false; + ath5k_hw_set_clockrate(ah); return 0; } @@ -1257,7 +1258,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, * Disable beacons and RX/TX queues, wait */ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210, - AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); + AR5K_DIAG_SW_DIS_TX_5210 | AR5K_DIAG_SW_DIS_RX_5210); beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); @@ -1336,7 +1337,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, * Re-enable RX/TX and beacons */ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210, - AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); + AR5K_DIAG_SW_DIS_TX_5210 | AR5K_DIAG_SW_DIS_RX_5210); ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210); return 0; @@ -1377,7 +1378,7 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) /* protect against divide by 0 and loss of sign bits */ if (i_coffd == 0 || q_coffd < 2) - return -1; + return 0; i_coff = (-iq_corr) / i_coffd; i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */ @@ -1582,7 +1583,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, else if (curr_sym_off >= 31 && curr_sym_off <= 46) mag_mask[2] |= plt_mag_map << (curr_sym_off - 31) * 2; - else if (curr_sym_off >= 46 && curr_sym_off <= 53) + else if (curr_sym_off >= 47 && curr_sym_off <= 53) mag_mask[3] |= plt_mag_map << (curr_sym_off - 47) * 2; @@ -2987,7 +2988,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, /* - * Set transmition power + * Set transmission power */ int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, @@ -3035,9 +3036,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Limit max power if we have a CTL available */ ath5k_get_max_ctl_power(ah, channel); - /* FIXME: Tx power limit for this regdomain - * XXX: Mac80211/CRDA will do that anyway ? */ - /* FIXME: Antenna reduction stuff */ /* FIXME: Limit power on turbo modes */ diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 4186ff4c6e9c..84c717ded1c5 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -36,24 +36,58 @@ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, } /* + * Make sure cw is a power of 2 minus 1 and smaller than 1024 + */ +static u16 ath5k_cw_validate(u16 cw_req) +{ + u32 cw = 1; + cw_req = min(cw_req, (u16)1023); + + while (cw < cw_req) + cw = (cw << 1) | 1; + + return cw; +} + +/* * Set properties for a transmit queue */ int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info) + const struct ath5k_txq_info *qinfo) { + struct ath5k_txq_info *qi; + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + qi = &ah->ah_txq[queue]; + + if (qi->tqi_type == AR5K_TX_QUEUE_INACTIVE) return -EIO; - memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); + /* copy and validate values */ + qi->tqi_type = qinfo->tqi_type; + qi->tqi_subtype = qinfo->tqi_subtype; + qi->tqi_flags = qinfo->tqi_flags; + /* + * According to the docs: Although the AIFS field is 8 bit wide, + * the maximum supported value is 0xFC. Setting it higher than that + * will cause the DCU to hang. + */ + qi->tqi_aifs = min(qinfo->tqi_aifs, (u8)0xFC); + qi->tqi_cw_min = ath5k_cw_validate(qinfo->tqi_cw_min); + qi->tqi_cw_max = ath5k_cw_validate(qinfo->tqi_cw_max); + qi->tqi_cbr_period = qinfo->tqi_cbr_period; + qi->tqi_cbr_overflow_limit = qinfo->tqi_cbr_overflow_limit; + qi->tqi_burst_time = qinfo->tqi_burst_time; + qi->tqi_ready_time = qinfo->tqi_ready_time; /*XXX: Is this supported on 5210 ?*/ - if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && - ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || - (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || - queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) - ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + /*XXX: Is this correct for AR5K_WME_AC_VI,VO ???*/ + if ((qinfo->tqi_type == AR5K_TX_QUEUE_DATA && + ((qinfo->tqi_subtype == AR5K_WME_AC_VI) || + (qinfo->tqi_subtype == AR5K_WME_AC_VO))) || + qinfo->tqi_type == AR5K_TX_QUEUE_UAPSD) + qi->tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; return 0; } @@ -186,7 +220,7 @@ void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) */ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) { - u32 cw_min, cw_max, retry_lg, retry_sh; + u32 retry_lg, retry_sh; struct ath5k_txq_info *tq = &ah->ah_txq[queue]; AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); @@ -217,14 +251,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) /* Set IFS0 */ if (ah->ah_turbo) { ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME_TURBO) << + tq->tqi_aifs * AR5K_INIT_SLOT_TIME_TURBO) << AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, AR5K_IFS0); } else { ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | + tq->tqi_aifs * AR5K_INIT_SLOT_TIME) << + AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS, AR5K_IFS0); } @@ -248,35 +281,6 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) } /* - * Calculate cwmin/max by channel mode - */ - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; - ah->ah_aifs = AR5K_TUNE_AIFS; - /*XR is only supported on 5212*/ - if (IS_CHAN_XR(ah->ah_current_channel) && - ah->ah_version == AR5K_AR5212) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; - ah->ah_aifs = AR5K_TUNE_AIFS_XR; - /*B mode is not supported on 5210*/ - } else if (IS_CHAN_B(ah->ah_current_channel) && - ah->ah_version != AR5K_AR5210) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; - ah->ah_aifs = AR5K_TUNE_AIFS_11B; - } - - cw_min = 1; - while (cw_min < ah->ah_cw_min) - cw_min = (cw_min << 1) | 1; - - cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : - ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); - cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : - ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); - - /* * Calculate and set retry limits */ if (ah->ah_software_retry) { @@ -292,7 +296,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) /*No QCU/DCU [5210]*/ if (ah->ah_version == AR5K_AR5210) { ath5k_hw_reg_write(ah, - (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + (tq->tqi_cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, AR5K_NODCU_RETRY_LMT_SLG_RETRY) | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, @@ -314,14 +318,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) /*===Rest is also for QCU/DCU only [5211+]===*/ /* - * Set initial content window (cw_min/cw_max) + * Set contention window (cw_min/cw_max) * and arbitrated interframe space (aifs)... */ ath5k_hw_reg_write(ah, - AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | - AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | - AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, - AR5K_DCU_LCL_IFS_AIFS), + AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS), AR5K_QUEUE_DFS_LOCAL_IFS(queue)); /* diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 55b4ac6d236f..ca79ecd832fd 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -26,7 +26,6 @@ * Atheros presentations and papers like these: * * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf * @@ -1387,10 +1386,9 @@ /* - * PCU control register + * PCU Diagnostic register * - * Only DIS_RX is used in the code, the rest i guess are - * for tweaking/diagnostics. + * Used for tweaking/diagnostics. */ #define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ #define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ @@ -1399,22 +1397,22 @@ #define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ #define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ #define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ -#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */ -#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */ -#define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ -#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ +#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable HW encryption */ +#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable HW decryption */ +#define AR5K_DIAG_SW_DIS_TX_5210 0x00000020 /* Disable transmit [5210] */ +#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable receive */ #define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 #define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) -#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */ +#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* TX Data Loopback (i guess it goes with DIS_TX) [5210] */ #define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 #define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) -#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */ +#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Generate invalid TX FCS */ #define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 #define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) -#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */ +#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Add 56 bytes of channel info before the frame data in the RX buffer */ #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) @@ -1426,17 +1424,17 @@ #define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ #define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ #define AR5K_DIAG_SW_SCRAM_SEED_S 10 -#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ +#define AR5K_DIAG_SW_DIS_SEQ_INC_5210 0x00040000 /* Disable seqnum increment (?)[5210] */ #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 #define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ #define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) #define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ #define AR5K_DIAG_SW_OBSPT_S 18 -#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */ -#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */ -#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */ -#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */ +#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x00100000 /* Ignore carrier sense */ +#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x00200000 /* Ignore virtual carrier sense */ +#define AR5K_DIAG_SW_CHANNEL_IDLE_HIGH 0x00400000 /* Force channel idle high */ +#define AR5K_DIAG_SW_PHEAR_ME 0x00800000 /* ??? */ /* * TSF (clock) register (lower 32 bits) @@ -1822,50 +1820,8 @@ /*===5212 end===*/ -/* - * Key table (WEP) register - */ -#define AR5K_KEYTABLE_0_5210 0x9000 -#define AR5K_KEYTABLE_0_5211 0x8800 -#define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5)) -#define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5)) -#define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \ - AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n)) -#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2)) -#define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5) -#define AR5K_KEYTABLE_TYPE_40 0x00000000 -#define AR5K_KEYTABLE_TYPE_104 0x00000001 -#define AR5K_KEYTABLE_TYPE_128 0x00000003 -#define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */ -#define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */ -#define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */ -#define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */ -#define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */ -#define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6) -#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7) -#define AR5K_KEYTABLE_VALID 0x00008000 - -/* If key type is TKIP and MIC is enabled - * MIC key goes in offset entry + 64 */ -#define AR5K_KEYTABLE_MIC_OFFSET 64 - -/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit - * WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit - * WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit - * - * Some vendors have introduced bigger WEP keys to address - * security vulnerabilities in WEP. This includes: - * - * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit - * - * We can expand this if we find ar5k Atheros cards with a larger - * key table size. - */ #define AR5K_KEYTABLE_SIZE_5210 64 #define AR5K_KEYTABLE_SIZE_5211 128 -#define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \ - AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211) - /*===PHY REGISTERS===*/ @@ -1911,7 +1867,7 @@ #define AR5K_PHY_TURBO 0x9804 /* Register Address */ #define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ #define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ -#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */ +#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo */ /* * PHY agility command register diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 498aa28ea9e6..5b179d01f97d 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -167,7 +167,7 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, * ieee80211_duration() for a brief description of * what rate we should choose to TX ACKs. */ tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - sc->vif, 10, rate)); + NULL, 10, rate)); ath5k_hw_reg_write(ah, tx_time, reg); @@ -326,7 +326,7 @@ commit: * register). After this MAC and Baseband are * disabled and a full reset is needed to come * back. This way we save as much power as possible - * without puting the card on full sleep. + * without putting the card on full sleep. */ int ath5k_hw_on_hold(struct ath5k_hw *ah) { @@ -344,7 +344,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) /* * Put chipset on warm reset... * - * Note: puting PCI core on warm reset on PCI-E cards + * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so * we ingore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. @@ -400,7 +400,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) /* * Put chipset on warm reset... * - * Note: puting PCI core on warm reset on PCI-E cards + * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so * we ingore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. @@ -959,7 +959,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, AR5K_QUEUE_DCU_SEQNUM(0)); } - /* TSF accelerates on AR5211 durring reset + /* TSF accelerates on AR5211 during reset * As a workaround save it here and restore * it later so that it's back in time after * reset. This way it'll get re-synced on the @@ -1060,7 +1060,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, * XXX: rethink this after new mode changes to * mac80211 are integrated */ if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->vif != NULL) + ah->ah_sc->nvifs) ath5k_hw_write_rate_duration(ah, mode); /* @@ -1080,7 +1080,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, return ret; /* Spur info is available only from EEPROM versions - * bigger than 5.3 but but the EEPOM routines will use + * greater than 5.3, but the EEPROM routines will use * static values for older versions */ if (ah->ah_mac_srev >= AR5K_SREV_AR5424) ath5k_hw_set_spur_mitigation_filter(ah, @@ -1160,7 +1160,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, */ /* Restore bssid and bssid mask */ - ath5k_hw_set_associd(ah); + ath5k_hw_set_bssid(ah); /* Set PCU config */ ath5k_hw_set_opmode(ah, op_mode); @@ -1173,11 +1173,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Set RSSI/BRSSI thresholds * * Note: If we decide to set this value - * dynamicaly, have in mind that when AR5K_RSSI_THR - * register is read it might return 0x40 if we haven't - * wrote anything to it plus BMISS RSSI threshold is zeroed. + * dynamically, keep in mind that when AR5K_RSSI_THR + * register is read, it might return 0x40 if we haven't + * written anything to it. Also, BMISS RSSI threshold is zeroed. * So doing a save/restore procedure here isn't the right - * choice. Instead store it on ath5k_hw */ + * choice. Instead, store it in ath5k_hw */ ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S), @@ -1235,7 +1235,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* * Perform ADC test to see if baseband is ready - * Set tx hold and check adc test register + * Set TX hold and check ADC test register */ phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); @@ -1254,15 +1254,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, * * This method is used to calibrate some static offsets * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), that doesn't + * one performed via ath5k_hw_phy_calibrate), which doesn't * interrupt rx path. * * While rx path is re-routed to the power detector we also - * start a noise floor calibration, to measure the + * start a noise floor calibration to measure the * card's noise floor (the noise we measure when we are not - * transmiting or receiving anything). + * transmitting or receiving anything). * - * If we are in a noisy environment AGC calibration may time + * If we are in a noisy environment, AGC calibration may time * out and/or noise floor calibration might timeout. */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h index e50baff66175..3ac4cff4239d 100644 --- a/drivers/net/wireless/ath/ath5k/rfbuffer.h +++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h @@ -25,10 +25,10 @@ * * We don't write on those registers directly but * we send a data packet on the chip, using a special register, - * that holds all the settings we need. After we 've sent the + * that holds all the settings we need. After we've sent the * data packet, we write on another special register to notify hw * to apply the settings. This is done so that control registers - * can be dynamicaly programmed during operation and the settings + * can be dynamically programmed during operation and the settings * are applied faster on the hw. * * We call each data packet an "RF Bank" and all the data we write |