diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/mac80211-ops.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 43 |
4 files changed, 40 insertions, 17 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 64a453a6dfe4..3150def17193 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1331,7 +1331,6 @@ struct ath5k_hw { unsigned int nexttbtt; /* next beacon time in TU */ struct ath5k_txq *cabq; /* content after beacon */ - int power_level; /* Requested tx power in dBm */ bool assoc; /* associate state */ bool enable_beacon; /* true if beacons are on */ @@ -1425,6 +1424,7 @@ struct ath5k_hw { /* Value in dB units */ s16 txp_cck_ofdm_pwr_delta; bool txp_setup; + int txp_requested; /* Requested tx power in dBm */ } ah_txpower; struct ath5k_nfcal_hist ah_nfcal_hist; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 8c4c040a47b8..9d48f9a461e1 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -723,7 +723,7 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), padsize, get_hw_packet_type(skb), - (ah->power_level * 2), + (ah->ah_txpower.txp_requested * 2), hw_rate, info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags, cts_rate, duration); @@ -1778,7 +1778,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, ieee80211_get_hdrlen_from_skb(skb), padsize, - AR5K_PKT_TYPE_BEACON, (ah->power_level * 2), + AR5K_PKT_TYPE_BEACON, + (ah->ah_txpower.txp_requested * 2), ieee80211_get_tx_rate(ah->hw, info)->hw_value, 1, AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0); diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 260e7dc7f751..c89fa6ead615 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -55,7 +55,8 @@ \********************/ static void -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ath5k_hw *ah = hw->priv; u16 qnum = skb_get_queue_mapping(skb); @@ -207,8 +208,8 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) } if ((changed & IEEE80211_CONF_CHANGE_POWER) && - (ah->power_level != conf->power_level)) { - ah->power_level = conf->power_level; + (ah->ah_txpower.txp_requested != conf->power_level)) { + ah->ah_txpower.txp_requested = conf->power_level; /* Half dB steps */ ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 8b71a2d947e0..01c90ed58453 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -3516,6 +3516,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, { unsigned int i; u16 *rates; + s16 rate_idx_scaled = 0; /* max_pwr is power level we got from driver/user in 0.5dB * units, switch to 0.25dB units so we can compare */ @@ -3562,20 +3563,32 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, for (i = 8; i <= 15; i++) rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + /* Save min/max and current tx power for this channel + * in 0.25dB units. + * + * Note: We use rates[0] for current tx power because + * it covers most of the rates, in most cases. It's our + * tx power limit and what the user expects to see. */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; + + /* Set max txpower for correct OFDM operation on all rates + * -that is the txpower for 54Mbit-, it's used for the PAPD + * gain probe and it's in 0.5dB units */ + ah->ah_txpower.txp_ofdm = rates[7]; + /* Now that we have all rates setup use table offset to * match the power range set by user with the power indices * on PCDAC/PDADC table */ for (i = 0; i < 16; i++) { - rates[i] += ah->ah_txpower.txp_offset; + rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset; /* Don't get out of bounds */ - if (rates[i] > 63) - rates[i] = 63; + if (rate_idx_scaled > 63) + rate_idx_scaled = 63; + if (rate_idx_scaled < 0) + rate_idx_scaled = 0; + rates[i] = rate_idx_scaled; } - - /* Min/max in 0.25dB units */ - ah->ah_txpower.txp_min_pwr = 2 * rates[7]; - ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; - ah->ah_txpower.txp_ofdm = rates[7]; } @@ -3639,10 +3652,17 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (!ah->ah_txpower.txp_setup || (channel->hw_value != curr_channel->hw_value) || (channel->center_freq != curr_channel->center_freq)) { - /* Reset TX power values */ + /* Reset TX power values but preserve requested + * tx power from above */ + int requested_txpower = ah->ah_txpower.txp_requested; + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + + /* Restore TPC setting and requested tx power */ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_txpower.txp_requested = requested_txpower; + /* Calculate the powertable */ ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); @@ -3789,8 +3809,9 @@ ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * RF buffer settings on 5211/5212+ so that we * properly set curve indices. */ - ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ? - ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER); + ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ? + ah->ah_txpower.txp_requested * 2 : + AR5K_TUNE_MAX_TXPOWER); if (ret) return ret; |