diff options
Diffstat (limited to 'drivers/net/wan')
| -rw-r--r-- | drivers/net/wan/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/net/wan/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/wan/dscc4.c | 2057 | ||||
| -rw-r--r-- | drivers/net/wan/lmc/lmc_main.c | 2 |
4 files changed, 1 insertions, 2073 deletions
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 09fdd619ac67..dd1a147f2971 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -267,20 +267,6 @@ config FARSYNC To compile this driver as a module, choose M here: the module will be called farsync. -config DSCC4 - tristate "Etinc PCISYNC serial board support" - depends on HDLC && PCI && m - help - Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) - DSCC4 chipset. - - This is supposed to work with the four port card. Take a look at - <http://www.cogenit.fr/dscc4/> for further information about the - driver. - - To compile this driver as a module, choose M here: the - module will be called dscc4. - config FSL_UCC_HDLC tristate "Freescale QUICC Engine HDLC support" depends on HDLC diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 9532e69fda87..701f5d2fe3b6 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o -obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_X25_ASY) += x25_asy.o obj-$(CONFIG_LANMEDIA) += lmc/ diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c deleted file mode 100644 index fa78d2b14136..000000000000 --- a/drivers/net/wan/dscc4.c +++ /dev/null @@ -1,2057 +0,0 @@ -/* - * drivers/net/wan/dscc4/dscc4.c: a DSCC4 HDLC driver for Linux - * - * This software may be used and distributed according to the terms of the - * GNU General Public License. - * - * The author may be reached as romieu@cogenit.fr. - * Specific bug reports/asian food will be welcome. - * - * Special thanks to the nice people at CS-Telecom for the hardware and the - * access to the test/measure tools. - * - * - * Theory of Operation - * - * I. Board Compatibility - * - * This device driver is designed for the Siemens PEB20534 4 ports serial - * controller as found on Etinc PCISYNC cards. The documentation for the - * chipset is available at http://www.infineon.com: - * - Data Sheet "DSCC4, DMA Supported Serial Communication Controller with - * 4 Channels, PEB 20534 Version 2.1, PEF 20534 Version 2.1"; - * - Application Hint "Management of DSCC4 on-chip FIFO resources". - * - Errata sheet DS5 (courtesy of Michael Skerritt). - * Jens David has built an adapter based on the same chipset. Take a look - * at http://www.afthd.tu-darmstadt.de/~dg1kjd/pciscc4 for a specific - * driver. - * Sample code (2 revisions) is available at Infineon. - * - * II. Board-specific settings - * - * Pcisync can transmit some clock signal to the outside world on the - * *first two* ports provided you put a quartz and a line driver on it and - * remove the jumpers. The operation is described on Etinc web site. If you - * go DCE on these ports, don't forget to use an adequate cable. - * - * Sharing of the PCI interrupt line for this board is possible. - * - * III. Driver operation - * - * The rx/tx operations are based on a linked list of descriptors. The driver - * doesn't use HOLD mode any more. HOLD mode is definitely buggy and the more - * I tried to fix it, the more it started to look like (convoluted) software - * mutation of LxDA method. Errata sheet DS5 suggests to use LxDA: consider - * this a rfc2119 MUST. - * - * Tx direction - * When the tx ring is full, the xmit routine issues a call to netdev_stop. - * The device is supposed to be enabled again during an ALLS irq (we could - * use HI but as it's easy to lose events, it's fscked). - * - * Rx direction - * The received frames aren't supposed to span over multiple receiving areas. - * I may implement it some day but it isn't the highest ranked item. - * - * IV. Notes - * The current error (XDU, RFO) recovery code is untested. - * So far, RDO takes his RX channel down and the right sequence to enable it - * again is still a mystery. If RDO happens, plan a reboot. More details - * in the code (NB: as this happens, TX still works). - * Don't mess the cables during operation, especially on DTE ports. I don't - * suggest it for DCE either but at least one can get some messages instead - * of a complete instant freeze. - * Tests are done on Rev. 20 of the silicium. The RDO handling changes with - * the documentation/chipset releases. - * - * TODO: - * - test X25. - * - use polling at high irq/s, - * - performance analysis, - * - endianness. - * - * 2001/12/10 Daniela Squassoni <daniela@cyclades.com> - * - Contribution to support the new generic HDLC layer. - * - * 2002/01 Ueimor - * - old style interface removal - * - dscc4_release_ring fix (related to DMA mapping) - * - hard_start_xmit fix (hint: TxSizeMax) - * - misc crapectomy. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/list.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/slab.h> - -#include <asm/cache.h> -#include <asm/byteorder.h> -#include <linux/uaccess.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/string.h> - -#include <linux/if_arp.h> -#include <linux/netdevice.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/hdlc.h> -#include <linux/mutex.h> - -/* Version */ -static const char version[] = "$Id: dscc4.c,v 1.173 2003/09/20 23:55:34 romieu Exp $ for Linux\n"; -static int debug; -static int quartz; - -#ifdef CONFIG_DSCC4_PCI_RST -static DEFINE_MUTEX(dscc4_mutex); -static u32 dscc4_pci_config_store[16]; -#endif - -#define DRV_NAME "dscc4" - -#undef DSCC4_POLLING - -/* Module parameters */ - -MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>"); -MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller"); -MODULE_LICENSE("GPL"); -module_param(debug, int, 0); -MODULE_PARM_DESC(debug,"Enable/disable extra messages"); -module_param(quartz, int, 0); -MODULE_PARM_DESC(quartz,"If present, on-board quartz frequency (Hz)"); - -/* Structures */ - -struct thingie { - int define; - u32 bits; -}; - -struct TxFD { - __le32 state; - __le32 next; - __le32 data; - __le32 complete; - u32 jiffies; /* Allows sizeof(TxFD) == sizeof(RxFD) + extra hack */ - /* FWIW, datasheet calls that "dummy" and says that card - * never looks at it; neither does the driver */ -}; - -struct RxFD { - __le32 state1; - __le32 next; - __le32 data; - __le32 state2; - __le32 end; -}; - -#define DUMMY_SKB_SIZE 64 -#define TX_LOW 8 -#define TX_RING_SIZE 32 -#define RX_RING_SIZE 32 -#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct TxFD) -#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct RxFD) -#define IRQ_RING_SIZE 64 /* Keep it a multiple of 32 */ -#define TX_TIMEOUT (HZ/10) -#define DSCC4_HZ_MAX 33000000 -#define BRR_DIVIDER_MAX 64*0x00004000 /* Cf errata DS5 p.10 */ -#define dev_per_card 4 -#define SCC_REGISTERS_MAX 23 /* Cf errata DS5 p.4 */ - -#define SOURCE_ID(flags) (((flags) >> 28) & 0x03) -#define TO_SIZE(state) (((state) >> 16) & 0x1fff) - -/* - * Given the operating range of Linux HDLC, the 2 defines below could be - * made simpler. However they are a fine reminder for the limitations of - * the driver: it's better to stay < TxSizeMax and < RxSizeMax. - */ -#define TO_STATE_TX(len) cpu_to_le32(((len) & TxSizeMax) << 16) -#define TO_STATE_RX(len) cpu_to_le32((RX_MAX(len) % RxSizeMax) << 16) -#define RX_MAX(len) ((((len) >> 5) + 1) << 5) /* Cf RLCR */ -#define SCC_REG_START(dpriv) (SCC_START+(dpriv->dev_id)*SCC_OFFSET) - -struct dscc4_pci_priv { - __le32 *iqcfg; - int cfg_cur; - spinlock_t lock; - struct pci_dev *pdev; - - struct dscc4_dev_priv *root; - dma_addr_t iqcfg_dma; - u32 xtal_hz; -}; - -struct dscc4_dev_priv { - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - - struct RxFD *rx_fd; - struct TxFD *tx_fd; - __le32 *iqrx; - __le32 *iqtx; - - /* FIXME: check all the volatile are required */ - volatile u32 tx_current; - u32 rx_current; - u32 iqtx_current; - u32 iqrx_current; - - volatile u32 tx_dirty; - volatile u32 ltda; - u32 rx_dirty; - u32 lrda; - - dma_addr_t tx_fd_dma; - dma_addr_t rx_fd_dma; - dma_addr_t iqtx_dma; - dma_addr_t iqrx_dma; - - u32 scc_regs[SCC_REGISTERS_MAX]; /* Cf errata DS5 p.4 */ - - struct dscc4_pci_priv *pci_priv; - spinlock_t lock; - - int dev_id; - volatile u32 flags; - u32 timer_help; - - unsigned short encoding; - unsigned short parity; - struct net_device *dev; - sync_serial_settings settings; - void __iomem *base_addr; - u32 __pad __attribute__ ((aligned (4))); -}; - -/* GLOBAL registers definitions */ -#define GCMDR 0x00 -#define GSTAR 0x04 -#define GMODE 0x08 -#define IQLENR0 0x0C -#define IQLENR1 0x10 -#define IQRX0 0x14 -#define IQTX0 0x24 -#define IQCFG 0x3c -#define FIFOCR1 0x44 -#define FIFOCR2 0x48 -#define FIFOCR3 0x4c -#define FIFOCR4 0x34 -#define CH0CFG 0x50 -#define CH0BRDA 0x54 -#define CH0BTDA 0x58 -#define CH0FRDA 0x98 -#define CH0FTDA 0xb0 -#define CH0LRDA 0xc8 -#define CH0LTDA 0xe0 - -/* SCC registers definitions */ -#define SCC_START 0x0100 -#define SCC_OFFSET 0x80 -#define CMDR 0x00 -#define STAR 0x04 -#define CCR0 0x08 -#define CCR1 0x0c -#define CCR2 0x10 -#define BRR 0x2C -#define RLCR 0x40 -#define IMR 0x54 -#define ISR 0x58 - -#define GPDIR 0x0400 -#define GPDATA 0x0404 -#define GPIM 0x0408 - -/* Bit masks */ -#define EncodingMask 0x00700000 -#define CrcMask 0x00000003 - -#define IntRxScc0 0x10000000 -#define IntTxScc0 0x01000000 - -#define TxPollCmd 0x00000400 -#define RxActivate 0x08000000 -#define MTFi 0x04000000 -#define Rdr 0x00400000 -#define Rdt 0x00200000 -#define Idr 0x00100000 -#define Idt 0x00080000 -#define TxSccRes 0x01000000 -#define RxSccRes 0x00010000 -#define TxSizeMax 0x1fff /* Datasheet DS1 - 11.1.1.1 */ -#define RxSizeMax 0x1ffc /* Datasheet DS1 - 11.1.2.1 */ - -#define Ccr0ClockMask 0x0000003f -#define Ccr1LoopMask 0x00000200 -#define IsrMask 0x000fffff -#define BrrExpMask 0x00000f00 -#define BrrMultMask 0x0000003f -#define EncodingMask 0x00700000 -#define Hold cpu_to_le32(0x40000000) -#define SccBusy 0x10000000 -#define PowerUp 0x80000000 -#define Vis 0x00001000 -#define FrameOk (FrameVfr | FrameCrc) -#define FrameVfr 0x80 -#define FrameRdo 0x40 -#define FrameCrc 0x20 -#define FrameRab 0x10 -#define FrameAborted cpu_to_le32(0x00000200) -#define FrameEnd cpu_to_le32(0x80000000) -#define DataComplete cpu_to_le32(0x40000000) -#define LengthCheck 0x00008000 -#define SccEvt 0x02000000 -#define NoAck 0x00000200 -#define Action 0x00000001 -#define HiDesc cpu_to_le32(0x20000000) - -/* SCC events */ -#define RxEvt 0xf0000000 -#define TxEvt 0x0f000000 -#define Alls 0x00040000 -#define Xdu 0x00010000 -#define Cts 0x00004000 -#define Xmr 0x00002000 -#define Xpr 0x00001000 -#define Rdo 0x00000080 -#define Rfs 0x00000040 -#define Cd 0x00000004 -#define Rfo 0x00000002 -#define Flex 0x00000001 - -/* DMA core events */ -#define Cfg 0x00200000 -#define Hi 0x00040000 -#define Fi 0x00020000 -#define Err 0x00010000 -#define Arf 0x00000002 -#define ArAck 0x00000001 - -/* State flags */ -#define Ready 0x00000000 -#define NeedIDR 0x00000001 -#define NeedIDT 0x00000002 -#define RdoSet 0x00000004 -#define FakeReset 0x00000008 - -/* Don't mask RDO. Ever. */ -#ifdef DSCC4_POLLING -#define EventsMask 0xfffeef7f -#else -#define EventsMask 0xfffa8f7a -#endif - -/* Functions prototypes */ -static void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *); -static void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *); -static int dscc4_found1(struct pci_dev *, void __iomem *ioaddr); -static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent); -static int dscc4_open(struct net_device *); -static netdev_tx_t dscc4_start_xmit(struct sk_buff *, - struct net_device *); -static int dscc4_close(struct net_device *); -static int dscc4_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static int dscc4_init_ring(struct net_device *); -static void dscc4_release_ring(struct dscc4_dev_priv *); -static void dscc4_tx_timeout(struct net_device *); -static irqreturn_t dscc4_irq(int irq, void *dev_id); -static int dscc4_hdlc_attach(struct net_device *, unsigned short, unsigned short); -static int dscc4_set_iface(struct dscc4_dev_priv *, struct net_device *); -#ifdef DSCC4_POLLING -static int dscc4_tx_poll(struct dscc4_dev_priv *, struct net_device *); -#endif - -static inline struct dscc4_dev_priv *dscc4_priv(struct net_device *dev) -{ - return dev_to_hdlc(dev)->priv; -} - -static inline struct net_device *dscc4_to_dev(struct dscc4_dev_priv *p) -{ - return p->dev; -} - -static void scc_patchl(u32 mask, u32 value, struct dscc4_dev_priv *dpriv, - struct net_device *dev, int offset) -{ - u32 state; - - /* Cf scc_writel for concern regarding thread-safety */ - state = dpriv->scc_regs[offset >> 2]; - state &= ~mask; - state |= value; - dpriv->scc_regs[offset >> 2] = state; - writel(state, dpriv->base_addr + SCC_REG_START(dpriv) + offset); -} - -static void scc_writel(u32 bits, struct dscc4_dev_priv *dpriv, - struct net_device *dev, int offset) -{ - /* - * Thread-UNsafe. - * As of 2002/02/16, there are no thread racing for access. - */ - dpriv->scc_regs[offset >> 2] = bits; - writel(bits, dpriv->base_addr + SCC_REG_START(dpriv) + offset); -} - -static inline u32 scc_readl(struct dscc4_dev_priv *dpriv, int offset) -{ - return dpriv->scc_regs[offset >> 2]; -} - -static u32 scc_readl_star(struct dscc4_dev_priv *dpriv, struct net_device *dev) -{ - /* Cf errata DS5 p.4 */ - readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR); - return readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR); -} - -static inline void dscc4_do_tx(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - dpriv->ltda = dpriv->tx_fd_dma + - ((dpriv->tx_current-1)%TX_RING_SIZE)*sizeof(struct TxFD); - writel(dpriv->ltda, dpriv->base_addr + CH0LTDA + dpriv->dev_id*4); - /* Flush posted writes *NOW* */ - readl(dpriv->base_addr + CH0LTDA + dpriv->dev_id*4); -} - -static inline void dscc4_rx_update(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - dpriv->lrda = dpriv->rx_fd_dma + - ((dpriv->rx_dirty - 1)%RX_RING_SIZE)*sizeof(struct RxFD); - writel(dpriv->lrda, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4); -} - -static inline unsigned int dscc4_tx_done(struct dscc4_dev_priv *dpriv) -{ - return dpriv->tx_current == dpriv->tx_dirty; -} - -static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda; -} - -static int state_check(u32 state, struct dscc4_dev_priv *dpriv, - struct net_device *dev, const char *msg) -{ - int ret = 0; - - if (debug > 1) { - if (SOURCE_ID(state) != dpriv->dev_id) { - printk(KERN_DEBUG "%s (%s): Source Id=%d, state=%08x\n", - dev->name, msg, SOURCE_ID(state), state); - ret = -1; - } - if (state & 0x0df80c00) { - printk(KERN_DEBUG "%s (%s): state=%08x (UFO alert)\n", - dev->name, msg, state); - ret = -1; - } - } - return ret; -} - -static void dscc4_tx_print(struct net_device *dev, - struct dscc4_dev_priv *dpriv, - char *msg) -{ - printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n", - dev->name, dpriv->tx_current, dpriv->tx_dirty, msg); -} - -static void dscc4_release_ring(struct dscc4_dev_priv *dpriv) -{ - struct device *d = &dpriv->pci_priv->pdev->dev; - struct TxFD *tx_fd = dpriv->tx_fd; - struct RxFD *rx_fd = dpriv->rx_fd; - struct sk_buff **skbuff; - int i; - - dma_free_coherent(d, TX_TOTAL_SIZE, tx_fd, dpriv->tx_fd_dma); - dma_free_coherent(d, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma); - - skbuff = dpriv->tx_skbuff; - for (i = 0; i < TX_RING_SIZE; i++) { - if (*skbuff) { - dma_unmap_single(d, le32_to_cpu(tx_fd->data), - (*skbuff)->len, DMA_TO_DEVICE); - dev_kfree_skb(*skbuff); - } - skbuff++; - tx_fd++; - } - - skbuff = dpriv->rx_skbuff; - for (i = 0; i < RX_RING_SIZE; i++) { - if (*skbuff) { - dma_unmap_single(d, le32_to_cpu(rx_fd->data), - RX_MAX(HDLC_MAX_MRU), - DMA_FROM_DEVICE); - dev_kfree_skb(*skbuff); - } - skbuff++; - rx_fd++; - } -} - -static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE; - struct device *d = &dpriv->pci_priv->pdev->dev; - struct RxFD *rx_fd = dpriv->rx_fd + dirty; - const int len = RX_MAX(HDLC_MAX_MRU); - struct sk_buff *skb; - dma_addr_t addr; - - skb = dev_alloc_skb(len); - if (!skb) - goto err_out; - - skb->protocol = hdlc_type_trans(skb, dev); - addr = dma_map_single(d, skb->data, len, DMA_FROM_DEVICE); - if (dma_mapping_error(d, addr)) - goto err_free_skb; - - dpriv->rx_skbuff[dirty] = skb; - rx_fd->data = cpu_to_le32(addr); - return 0; - -err_free_skb: - dev_kfree_skb_any(skb); -err_out: - rx_fd->data = 0; - return -1; -} - -/* - * IRQ/thread/whatever safe - */ -static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv, - struct net_device *dev, char *msg) -{ - s8 i = 0; - - do { - if (!(scc_readl_star(dpriv, dev) & SccBusy)) { - printk(KERN_DEBUG "%s: %s ack (%d try)\n", dev->name, - msg, i); - goto done; - } - schedule_timeout_uninterruptible(msecs_to_jiffies(100)); - rmb(); - } while (++i > 0); - netdev_err(dev, "%s timeout\n", msg); -done: - return (i >= 0) ? i : -EAGAIN; -} - -static int dscc4_do_action(struct net_device *dev, char *msg) -{ - void __iomem *ioaddr = dscc4_priv(dev)->base_addr; - s16 i = 0; - - writel(Action, ioaddr + GCMDR); - ioaddr += GSTAR; - do { - u32 state = readl(ioaddr); - - if (state & ArAck) { - netdev_dbg(dev, "%s ack\n", msg); - writel(ArAck, ioaddr); - goto done; - } else if (state & Arf) { - netdev_err(dev, "%s failed\n", msg); - writel(Arf, ioaddr); - i = -1; - goto done; - } - rmb(); - } while (++i > 0); - netdev_err(dev, "%s timeout\n", msg); -done: - return i; -} - -static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv) -{ - int cur = dpriv->iqtx_current%IRQ_RING_SIZE; - s8 i = 0; - - do { - if (!(dpriv->flags & (NeedIDR | NeedIDT)) || - (dpriv->iqtx[cur] & cpu_to_le32(Xpr))) - break; - smp_rmb(); - schedule_timeout_uninterruptible(msecs_to_jiffies(100)); - } while (++i > 0); - - return (i >= 0 ) ? i : -EAGAIN; -} - -#if 0 /* dscc4_{rx/tx}_reset are both unreliable - more tweak needed */ -static void dscc4_rx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&dpriv->pci_priv->lock, flags); - /* Cf errata DS5 p.6 */ - writel(0x00000000, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4); - scc_patchl(PowerUp, 0, dpriv, dev, CCR0); - readl(dpriv->base_addr + CH0LRDA + dpriv->dev_id*4); - writel(MTFi|Rdr, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG); - writel(Action, dpriv->base_addr + GCMDR); - spin_unlock_irqrestore(&dpriv->pci_priv->lock, flags); -} - -#endif - -#if 0 -static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev) -{ - u16 i = 0; - - /* Cf errata DS5 p.7 */ - scc_patchl(PowerUp, 0, dpriv, dev, CCR0); - scc_writel(0x00050000, dpriv, dev, CCR2); - /* - * Must be longer than the time required to fill the fifo. - */ - while (!dscc4_tx_quiescent(dpriv, dev) && ++i) { - udelay(1); - wmb(); - } - - writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG); - if (dscc4_do_action(dev, "Rdt") < 0) - netdev_err(dev, "Tx reset failed\n"); -} -#endif - -/* TODO: (ab)use this function to refill a completely depleted RX ring. */ -static inline void dscc4_rx_skb(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - struct RxFD *rx_fd = dpriv->rx_fd + dpriv->rx_current%RX_RING_SIZE; - struct device *d = &dpriv->pci_priv->pdev->dev; - struct sk_buff *skb; - int pkt_len; - - skb = dpriv->rx_skbuff[dpriv->rx_current++%RX_RING_SIZE]; - if (!skb) { - printk(KERN_DEBUG "%s: skb=0 (%s)\n", dev->name, __func__); - goto refill; - } - pkt_len = TO_SIZE(le32_to_cpu(rx_fd->state2)); - dma_unmap_single(d, le32_to_cpu(rx_fd->data), - RX_MAX(HDLC_MAX_MRU), DMA_FROM_DEVICE); - if ((skb->data[--pkt_len] & FrameOk) == FrameOk) { - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - skb_put(skb, pkt_len); - if (netif_running(dev)) - skb->protocol = hdlc_type_trans(skb, dev); - netif_rx(skb); - } else { - if (skb->data[pkt_len] & FrameRdo) - dev->stats.rx_fifo_errors++; - else if (!(skb->data[pkt_len] & FrameCrc)) - dev->stats.rx_crc_errors++; - else if ((skb->data[pkt_len] & (FrameVfr | FrameRab)) != - (FrameVfr | FrameRab)) - dev->stats.rx_length_errors++; - dev->stats.rx_errors++; - dev_kfree_skb_irq(skb); - } -refill: - while ((dpriv->rx_dirty - dpriv->rx_current) % RX_RING_SIZE) { - if (try_get_rx_skb(dpriv, dev) < 0) - break; - dpriv->rx_dirty++; - } - dscc4_rx_update(dpriv, dev); - rx_fd->state2 = 0x00000000; - rx_fd->end = cpu_to_le32(0xbabeface); -} - -static void dscc4_free1(struct pci_dev *pdev) -{ - struct dscc4_pci_priv *ppriv; - struct dscc4_dev_priv *root; - int i; - - ppriv = pci_get_drvdata(pdev); - root = ppriv->root; - - for (i = 0; i < dev_per_card; i++) - unregister_hdlc_device(dscc4_to_dev(root + i)); - - for (i = 0; i < dev_per_card; i++) - free_netdev(root[i].dev); - kfree(root); - kfree(ppriv); -} - -static int dscc4_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct dscc4_pci_priv *priv; - struct dscc4_dev_priv *dpriv; - void __iomem *ioaddr; - int i, rc; - - printk(KERN_DEBUG "%s", version); - - rc = pci_enable_device(pdev); - if (rc < 0) - goto out; - - rc = pci_request_region(pdev, 0, "registers"); - if (rc < 0) { - pr_err("can't reserve MMIO region (regs)\n"); - goto err_disable_0; - } - rc = pci_request_region(pdev, 1, "LBI interface"); - if (rc < 0) { - pr_err("can't reserve MMIO region (lbi)\n"); - goto err_free_mmio_region_1; - } - - ioaddr = pci_ioremap_bar(pdev, 0); - if (!ioaddr) { - pr_err("cannot remap MMIO region %llx @ %llx\n", - (unsigned long long)pci_resource_len(pdev, 0), - (unsigned long long)pci_resource_start(pdev, 0)); - rc = -EIO; - goto err_free_mmio_regions_2; - } - printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#llx (regs), %#llx (lbi), IRQ %d\n", - (unsigned long long)pci_resource_start(pdev, 0), - (unsigned long long)pci_resource_start(pdev, 1), pdev->irq); - - /* Cf errata DS5 p.2 */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xf8); - pci_set_master(pdev); - - rc = dscc4_found1(pdev, ioaddr); - if (rc < 0) - goto err_iounmap_3; - - priv = pci_get_drvdata(pdev); - - rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root); - if (rc < 0) { - pr_warn("IRQ %d busy\n", pdev->irq); - goto err_release_4; - } - - /* power up/little endian/dma core controlled via lrda/ltda */ - writel(0x00000001, ioaddr + GMODE); - /* Shared interrupt queue */ - { - u32 bits; - - bits = (IRQ_RING_SIZE >> 5) - 1; - bits |= bits << 4; - bits |= bits << 8; - bits |= bits << 16; - writel(bits, ioaddr + IQLENR0); - } - /* Global interrupt queue */ - writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1); - - rc = -ENOMEM; - - priv->iqcfg = (__le32 *)dma_alloc_coherent(&pdev->dev, - IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma, GFP_KERNEL); - if (!priv->iqcfg) - goto err_free_irq_5; - writel(priv->iqcfg_dma, ioaddr + IQCFG); - - /* - * SCC 0-3 private rx/tx irq structures - * IQRX/TXi needs to be set soon. Learned it the hard way... - */ - for (i = 0; i < dev_per_card; i++) { - dpriv = priv->root + i; - dpriv->iqtx = (__le32 *)dma_alloc_coherent(&pdev->dev, - IRQ_RING_SIZE*sizeof(u32), &dpriv->iqtx_dma, - GFP_KERNEL); - if (!dpriv->iqtx) - goto err_free_iqtx_6; - writel(dpriv->iqtx_dma, ioaddr + IQTX0 + i*4); - } - for (i = 0; i < dev_per_card; i++) { - dpriv = priv->root + i; - dpriv->iqrx = (__le32 *)dma_alloc_coherent(&pdev->dev, - IRQ_RING_SIZE*sizeof(u32), &dpriv->iqrx_dma, - GFP_KERNEL); - if (!dpriv->iqrx) - goto err_free_iqrx_7; - writel(dpriv->iqrx_dma, ioaddr + IQRX0 + i*4); - } - - /* Cf application hint. Beware of hard-lock condition on threshold. */ - writel(0x42104000, ioaddr + FIFOCR1); - //writel(0x9ce69800, ioaddr + FIFOCR2); - writel(0xdef6d800, ioaddr + FIFOCR2); - //writel(0x11111111, ioaddr + FIFOCR4); - writel(0x18181818, ioaddr + FIFOCR4); - // FIXME: should depend on the chipset revision - writel(0x0000000e, ioaddr + FIFOCR3); - - writel(0xff200001, ioaddr + GCMDR); - - rc = 0; -out: - return rc; - -err_free_iqrx_7: - while (--i >= 0) { - dpriv = priv->root + i; - dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), - dpriv->iqrx, dpriv->iqrx_dma); - } - i = dev_per_card; -err_free_iqtx_6: - while (--i >= 0) { - dpriv = priv->root + i; - dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), - dpriv->iqtx, dpriv->iqtx_dma); - } - dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), priv->iqcfg, - priv->iqcfg_dma); -err_free_irq_5: - free_irq(pdev->irq, priv->root); -err_release_4: - dscc4_free1(pdev); -err_iounmap_3: - iounmap (ioaddr); -err_free_mmio_regions_2: - pci_release_region(pdev, 1); -err_free_mmio_region_1: - pci_release_region(pdev, 0); -err_disable_0: - pci_disable_device(pdev); - goto out; -}; - -/* - * Let's hope the default values are decent enough to protect my - * feet from the user's gun - Ueimor - */ -static void dscc4_init_registers(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - /* No interrupts, SCC core disabled. Let's relax */ - scc_writel(0x00000000, dpriv, dev, CCR0); - - scc_writel(LengthCheck | (HDLC_MAX_MRU >> 5), dpriv, dev, RLCR); - - /* - * No address recognition/crc-CCITT/cts enabled - * Shared flags transmission disabled - cf errata DS5 p.11 - * Carrier detect disabled - cf errata p.14 - * FIXME: carrier detection/polarity may be handled more gracefully. - */ - scc_writel(0x02408000, dpriv, dev, CCR1); - - /* crc not forwarded - Cf errata DS5 p.11 */ - scc_writel(0x00050008 & ~RxActivate, dpriv, dev, CCR2); - // crc forwarded - //scc_writel(0x00250008 & ~RxActivate, dpriv, dev, CCR2); -} - -static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz) -{ - int ret = 0; - - if ((hz < 0) || (hz > DSCC4_HZ_MAX)) - ret = -EOPNOTSUPP; - else - dpriv->pci_priv->xtal_hz = hz; - - return ret; -} - -static const struct net_device_ops dscc4_ops = { - .ndo_open = dscc4_open, - .ndo_stop = dscc4_close, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = dscc4_ioctl, - .ndo_tx_timeout = dscc4_tx_timeout, -}; - -static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr) -{ - struct dscc4_pci_priv *ppriv; - struct dscc4_dev_priv *root; - int i, ret = -ENOMEM; - - root = kcalloc(dev_per_card, sizeof(*root), GFP_KERNEL); - if (!root) - goto err_out; - - for (i = 0; i < dev_per_card; i++) { - root[i].dev = alloc_hdlcdev(root + i); - if (!root[i].dev) - goto err_free_dev; - } - - ppriv = kzalloc(sizeof(*ppriv), GFP_KERNEL); - if (!ppriv) - goto err_free_dev; - - ppriv->root = root; - spin_lock_init(&ppriv->lock); - - for (i = 0; i < dev_per_card; i++) { - struct dscc4_dev_priv *dpriv = root + i; - struct net_device *d = dscc4_to_dev(dpriv); - hdlc_device *hdlc = dev_to_hdlc(d); - - d->base_addr = (unsigned long)ioaddr; - d->irq = pdev->irq; - d->netdev_ops = &dscc4_ops; - d->watchdog_timeo = TX_TIMEOUT; - SET_NETDEV_DEV(d, &pdev->dev); - - dpriv->dev_id = i; - dpriv->pci_priv = ppriv; - dpriv->base_addr = ioaddr; - spin_lock_init(&dpriv->lock); - - hdlc->xmit = dscc4_start_xmit; - hdlc->attach = dscc4_hdlc_attach; - - dscc4_init_registers(dpriv, d); - dpriv->parity = PARITY_CRC16_PR0_CCITT; - dpriv->encoding = ENCODING_NRZ; - - ret = dscc4_init_ring(d); - if (ret < 0) - goto err_unregister; - - ret = register_hdlc_device(d); - if (ret < 0) { - pr_err("unable to register\n"); - dscc4_release_ring(dpriv); - goto err_unregister; - } - } - - ret = dscc4_set_quartz(root, quartz); - if (ret < 0) - goto err_unregister; - - pci_set_drvdata(pdev, ppriv); - return ret; - -err_unregister: - while (i-- > 0) { - dscc4_release_ring(root + i); - unregister_hdlc_device(dscc4_to_dev(root + i)); - } - kfree(ppriv); - i = dev_per_card; -err_free_dev: - while (i-- > 0) - free_netdev(root[i].dev); - kfree(root); -err_out: - return ret; -}; - -static void dscc4_tx_timeout(struct net_device *dev) -{ - /* FIXME: something is missing there */ -} - -static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv) -{ - sync_serial_settings *settings = &dpriv->settings; - - if (settings->loopback && (settings->clock_type != CLOCK_INT)) { - struct net_device *dev = dscc4_to_dev(dpriv); - - netdev_info(dev, "loopback requires clock\n"); - return -1; - } - return 0; -} - -#ifdef CONFIG_DSCC4_PCI_RST -/* - * Some DSCC4-based cards wires the GPIO port and the PCI #RST pin together - * so as to provide a safe way to reset the asic while not the whole machine - * rebooting. - * - * This code doesn't need to be efficient. Keep It Simple - */ -static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr) -{ - int i; - - mutex_lock(&dscc4_mutex); - for (i = 0; i < 16; i++) - pci_read_config_dword(pdev, i << 2, dscc4_pci_config_store + i); - - /* Maximal LBI clock divider (who cares ?) and whole GPIO range. */ - writel(0x001c0000, ioaddr + GMODE); - /* Configure GPIO port as output */ - writel(0x0000ffff, ioaddr + GPDIR); - /* Disable interruption */ - writel(0x0000ffff, ioaddr + GPIM); - - writel(0x0000ffff, ioaddr + GPDATA); - writel(0x00000000, ioaddr + GPDATA); - - /* Flush posted writes */ - readl(ioaddr + GSTAR); - - schedule_timeout_uninterruptible(msecs_to_jiffies(100)); - - for (i = 0; i < 16; i++) - pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]); - mutex_unlock(&dscc4_mutex); -} -#else -#define dscc4_pci_reset(pdev,ioaddr) do {} while (0) -#endif /* CONFIG_DSCC4_PCI_RST */ - -static int dscc4_open(struct net_device *dev) -{ - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - int ret = -EAGAIN; - - if ((dscc4_loopback_check(dpriv) < 0)) - goto err; - - if ((ret = hdlc_open(dev))) - goto err; - - /* - * Due to various bugs, there is no way to reliably reset a - * specific port (manufacturer's dependent special PCI #RST wiring - * apart: it affects all ports). Thus the device goes in the best - * silent mode possible at dscc4_close() time and simply claims to - * be up if it's opened again. It still isn't possible to change - * the HDLC configuration without rebooting but at least the ports - * can be up/down ifconfig'ed without killing the host. - */ - if (dpriv->flags & FakeReset) { - dpriv->flags &= ~FakeReset; - scc_patchl(0, PowerUp, dpriv, dev, CCR0); - scc_patchl(0, 0x00050000, dpriv, dev, CCR2); - scc_writel(EventsMask, dpriv, dev, IMR); - netdev_info(dev, "up again\n"); - goto done; - } - - /* IDT+IDR during XPR */ - dpriv->flags = NeedIDR | NeedIDT; - - scc_patchl(0, PowerUp | Vis, dpriv, dev, CCR0); - - /* - * The following is a bit paranoid... - * - * NB: the datasheet "...CEC will stay active if the SCC is in - * power-down mode or..." and CCR2.RAC = 1 are two different - * situations. - */ - if (scc_readl_star(dpriv, dev) & SccBusy) { - netdev_err(dev, "busy - try later\n"); - ret = -EAGAIN; - goto err_out; - } else - netdev_info(dev, "available - good\n"); - - scc_writel(EventsMask, dpriv, dev, IMR); - - /* Posted write is flushed in the wait_ack loop */ - scc_writel(TxSccRes | RxSccRes, dpriv, dev, CMDR); - - if ((ret = dscc4_wait_ack_cec(dpriv, dev, "Cec")) < 0) - goto err_disable_scc_events; - - /* - * I would expect XPR near CE completion (before ? after ?). - * At worst, this code won't see a late XPR and people - * will have to re-issue an ifconfig (this is harmless). - * WARNING, a really missing XPR usually means a hardware - * reset is needed. Suggestions anyone ? - */ - if ((ret = dscc4_xpr_ack(dpriv)) < 0) { - pr_err("XPR timeout\n"); - goto err_disable_scc_events; - } - - if (debug > 2) - dscc4_tx_print(dev, dpriv, "Open"); - -done: - netif_start_queue(dev); - - netif_carrier_on(dev); - - return 0; - -err_disable_scc_events: - scc_writel(0xffffffff, dpriv, dev, IMR); - scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0); -err_out: - hdlc_close(dev); -err: - return ret; -} - -#ifdef DSCC4_POLLING -static int dscc4_tx_poll(struct dscc4_dev_priv *dpriv, struct net_device *dev) -{ - /* FIXME: it's gonna be easy (TM), for sure */ -} -#endif /* DSCC4_POLLING */ - -static netdev_tx_t dscc4_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - struct device *d = &dpriv->pci_priv->pdev->dev; - struct TxFD *tx_fd; - dma_addr_t addr; - int next; - - addr = dma_map_single(d, skb->data, skb->len, DMA_TO_DEVICE); - if (dma_mapping_error(d, addr)) { - dev_kfree_skb_any(skb); - dev->stats.tx_dropped++; - return NETDEV_TX_OK; - } - - next = dpriv->tx_current%TX_RING_SIZE; - dpriv->tx_skbuff[next] = skb; - tx_fd = dpriv->tx_fd + next; - tx_fd->state = FrameEnd | TO_STATE_TX(skb->len); - tx_fd->data = cpu_to_le32(addr); - tx_fd->complete = 0x00000000; - tx_fd->jiffies = jiffies; - mb(); - -#ifdef DSCC4_POLLING - spin_lock(&dpriv->lock); - while (dscc4_tx_poll(dpriv, dev)); - spin_unlock(&dpriv->lock); -#endif - - if (debug > 2) - dscc4_tx_print(dev, dpriv, "Xmit"); - /* To be cleaned(unsigned int)/optimized. Later, ok ? */ - if (!((++dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE)) - netif_stop_queue(dev); - - if (dscc4_tx_quiescent(dpriv, dev)) - dscc4_do_tx(dpriv, dev); - - return NETDEV_TX_OK; -} - -static int dscc4_close(struct net_device *dev) -{ - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - - netif_stop_queue(dev); - - scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0); - scc_patchl(0x00050000, 0, dpriv, dev, CCR2); - scc_writel(0xffffffff, dpriv, dev, IMR); - - dpriv->flags |= FakeReset; - - hdlc_close(dev); - - return 0; -} - -static inline int dscc4_check_clock_ability(int port) -{ - int ret = 0; - -#ifdef CONFIG_DSCC4_PCISYNC - if (port >= 2) - ret = -1; -#endif - return ret; -} - -/* - * DS1 p.137: "There are a total of 13 different clocking modes..." - * ^^ - * Design choices: - * - by default, assume a clock is provided on pin RxClk/TxClk (clock mode 0a). - * Clock mode 3b _should_ work but the testing seems to make this point - * dubious (DIY testing requires setting CCR0 at 0x00000033). - * This is supposed to provide least surprise "DTE like" behavior. - * - if line rate is specified, clocks are assumed to be locally generated. - * A quartz must be available (on pin XTAL1). Modes 6b/7b are used. Choosing - * between these it automagically done according on the required frequency - * scaling. Of course some rounding may take place. - * - no high speed mode (40Mb/s). May be trivial to do but I don't have an - * appropriate external clocking device for testing. - * - no time-slot/clock mode 5: shameless laziness. - * - * The clock signals wiring can be (is ?) manufacturer dependent. Good luck. - * - * BIG FAT WARNING: if the device isn't provided enough clocking signal, it - * won't pass the init sequence. For example, straight back-to-back DTE without - * external clock will fail when dscc4_open() (<- 'ifconfig hdlcx xxx') is - * called. - * - * Typos lurk in datasheet (missing divier in clock mode 7a figure 51 p.153 - * DS0 for example) - * - * Clock mode related bits of CCR0: - * +------------ TOE: output TxClk (0b/2b/3a/3b/6b/7a/7b only) - * | +---------- SSEL: sub-mode select 0 -> a, 1 -> b - * | | +-------- High Speed: say 0 - * | | | +-+-+-- Clock Mode: 0..7 - * | | | | | | - * -+-+-+-+-+-+-+-+ - * x|x|5|4|3|2|1|0| lower bits - * - * Division factor of BRR: k = (N+1)x2^M (total divider = 16xk in mode 6b) - * +-+-+-+------------------ M (0..15) - * | | | | +-+-+-+-+-+-- N (0..63) - * 0 0 0 0 | | | | 0 0 | | | | | | - * ...-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - * f|e|d|c|b|a|9|8|7|6|5|4|3|2|1|0| lower bits - * - */ -static int dscc4_set_clock(struct net_device *dev, u32 *bps, u32 *state) -{ - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - int ret = -1; - u32 brr; - - *state &= ~Ccr0ClockMask; - if (*bps) { /* Clock generated - required for DCE */ - u32 n = 0, m = 0, divider; - int xtal; - - xtal = dpriv->pci_priv->xtal_hz; - if (!xtal) - goto done; - if (dscc4_check_clock_ability(dpriv->dev_id) < 0) - goto done; - divider = xtal / *bps; - if (divider > BRR_DIVIDER_MAX) { - divider >>= 4; - *state |= 0x00000036; /* Clock mode 6b (BRG/16) */ - } else - *state |= 0x00000037; /* Clock mode 7b (BRG) */ - if (divider >> 22) { - n = 63; - m = 15; - } else if (divider) { - /* Extraction of the 6 highest weighted bits */ - m = 0; - while (0xffffffc0 & divider) { - m++; - divider >>= 1; - } - n = divider; - } - brr = (m << 8) | n; - divider = n << m; - if (!(*state & 0x00000001)) /* ?b mode mask => clock mode 6b */ - divider <<= 4; - *bps = xtal / divider; - } else { - /* - * External clock - DTE - * "state" already reflects Clock mode 0a (CCR0 = 0xzzzzzz00). - * Nothing more to be done - */ - brr = 0; - } - scc_writel(brr, dpriv, dev, BRR); - ret = 0; -done: - return ret; -} - -static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - const size_t size = sizeof(dpriv->settings); - int ret = 0; - - if (dev->flags & IFF_UP) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return -EOPNOTSUPP; - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - if (copy_to_user(line, &dpriv->settings, size)) - return -EFAULT; - break; - - case IF_IFACE_SYNC_SERIAL: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if (dpriv->flags & FakeReset) { - netdev_info(dev, "please reset the device before this command\n"); - return -EPERM; - } - if (copy_from_user(&dpriv->settings, line, size)) - return -EFAULT; - ret = dscc4_set_iface(dpriv, dev); - break; - - default: - ret = hdlc_ioctl(dev, ifr, cmd); - break; - } - - return ret; -} - -static int dscc4_match(const struct thingie *p, int value) -{ - int i; - - for (i = 0; p[i].define != -1; i++) { - if (value == p[i].define) - break; - } - if (p[i].define == -1) - return -1; - else - return i; -} - -static int dscc4_clock_setting(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - sync_serial_settings *settings = &dpriv->settings; - int ret = -EOPNOTSUPP; - u32 bps, state; - - bps = settings->clock_rate; - state = scc_readl(dpriv, CCR0); - if (dscc4_set_clock(dev, &bps, &state) < 0) - goto done; - if (bps) { /* DCE */ - printk(KERN_DEBUG "%s: generated RxClk (DCE)\n", dev->name); - if (settings->clock_rate != bps) { - printk(KERN_DEBUG "%s: clock adjusted (%08d -> %08d)\n", - dev->name, settings->clock_rate, bps); - settings->clock_rate = bps; - } - } else { /* DTE */ - state |= PowerUp | Vis; - printk(KERN_DEBUG "%s: external RxClk (DTE)\n", dev->name); - } - scc_writel(state, dpriv, dev, CCR0); - ret = 0; -done: - return ret; -} - -static int dscc4_encoding_setting(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - static const struct thingie encoding[] = { - { ENCODING_NRZ, 0x00000000 }, - { ENCODING_NRZI, 0x00200000 }, - { ENCODING_FM_MARK, 0x00400000 }, - { ENCODING_FM_SPACE, 0x00500000 }, - { ENCODING_MANCHESTER, 0x00600000 }, - { -1, 0} - }; - int i, ret = 0; - - i = dscc4_match(encoding, dpriv->encoding); - if (i >= 0) - scc_patchl(EncodingMask, encoding[i].bits, dpriv, dev, CCR0); - else - ret = -EOPNOTSUPP; - return ret; -} - -static int dscc4_loopback_setting(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - sync_serial_settings *settings = &dpriv->settings; - u32 state; - - state = scc_readl(dpriv, CCR1); - if (settings->loopback) { - printk(KERN_DEBUG "%s: loopback\n", dev->name); - state |= 0x00000100; - } else { - printk(KERN_DEBUG "%s: normal\n", dev->name); - state &= ~0x00000100; - } - scc_writel(state, dpriv, dev, CCR1); - return 0; -} - -static int dscc4_crc_setting(struct dscc4_dev_priv *dpriv, - struct net_device *dev) -{ - static const struct thingie crc[] = { - { PARITY_CRC16_PR0_CCITT, 0x00000010 }, - { PARITY_CRC16_PR1_CCITT, 0x00000000 }, - { PARITY_CRC32_PR0_CCITT, 0x00000011 }, - { PARITY_CRC32_PR1_CCITT, 0x00000001 } - }; - int i, ret = 0; - - i = dscc4_match(crc, dpriv->parity); - if (i >= 0) - scc_patchl(CrcMask, crc[i].bits, dpriv, dev, CCR1); - else - ret = -EOPNOTSUPP; - return ret; -} - -static int dscc4_set_iface(struct dscc4_dev_priv *dpriv, struct net_device *dev) -{ - struct { - int (*action)(struct dscc4_dev_priv *, struct net_device *); - } *p, do_setting[] = { - { dscc4_encoding_setting }, - { dscc4_clock_setting }, - { dscc4_loopback_setting }, - { dscc4_crc_setting }, - { NULL } - }; - int ret = 0; - - for (p = do_setting; p->action; p++) { - if ((ret = p->action(dpriv, dev)) < 0) - break; - } - return ret; -} - -static irqreturn_t dscc4_irq(int irq, void *token) -{ - struct dscc4_dev_priv *root = token; - struct dscc4_pci_priv *priv; - struct net_device *dev; - void __iomem *ioaddr; - u32 state; - unsigned long flags; - int i, handled = 1; - - priv = root->pci_priv; - dev = dscc4_to_dev(root); - - spin_lock_irqsave(&priv->lock, flags); - - ioaddr = root->base_addr; - - state = readl(ioaddr + GSTAR); - if (!state) { - handled = 0; - goto out; - } - if (debug > 3) - printk(KERN_DEBUG "%s: GSTAR = 0x%08x\n", DRV_NAME, state); - writel(state, ioaddr + GSTAR); - - if (state & Arf) { - netdev_err(dev, "failure (Arf). Harass the maintainer\n"); - goto out; - } - state &= ~ArAck; - if (state & Cfg) { - if (debug > 0) - printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME); - if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & cpu_to_le32(Arf)) - netdev_err(dev, "CFG failed\n"); - if (!(state &= ~Cfg)) - goto out; - } - if (state & RxEvt) { - i = dev_per_card - 1; - do { - dscc4_rx_irq(priv, root + i); - } while (--i >= 0); - state &= ~RxEvt; - } - if (state & TxEvt) { - i = dev_per_card - 1; - do { - dscc4_tx_irq(priv, root + i); - } while (--i >= 0); - state &= ~TxEvt; - } -out: - spin_unlock_irqrestore(&priv->lock, flags); - return IRQ_RETVAL(handled); -} - -static void dscc4_tx_irq(struct dscc4_pci_priv *ppriv, - struct dscc4_dev_priv *dpriv) -{ - struct net_device *dev = dscc4_to_dev(dpriv); - u32 state; - int cur, loop = 0; - -try: - cur = dpriv->iqtx_current%IRQ_RING_SIZE; - state = le32_to_cpu(dpriv->iqtx[cur]); - if (!state) { - if (debug > 4) - printk(KERN_DEBUG "%s: Tx ISR = 0x%08x\n", dev->name, - state); - if ((debug > 1) && (loop > 1)) - printk(KERN_DEBUG "%s: Tx irq loop=%d\n", dev->name, loop); - if (loop && netif_queue_stopped(dev)) - if ((dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE) - netif_wake_queue(dev); - - if (netif_running(dev) && dscc4_tx_quiescent(dpriv, dev) && - !dscc4_tx_done(dpriv)) - dscc4_do_tx(dpriv, dev); - return; - } - loop++; - dpriv->iqtx[cur] = 0; - dpriv->iqtx_current++; - - if (state_check(state, dpriv, dev, "Tx") < 0) - return; - - if (state & SccEvt) { - if (state & Alls) { - struct sk_buff *skb; - struct TxFD *tx_fd; - - if (debug > 2) - dscc4_tx_print(dev, dpriv, "Alls"); - /* - * DataComplete can't be trusted for Tx completion. - * Cf errata DS5 p.8 - */ - cur = dpriv->tx_dirty%TX_RING_SIZE; - tx_fd = dpriv->tx_fd + cur; - skb = dpriv->tx_skbuff[cur]; - if (skb) { - dma_unmap_single(&ppriv->pdev->dev, - le32_to_cpu(tx_fd->data), - skb->len, DMA_TO_DEVICE); - if (tx_fd->state & FrameEnd) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - } - dev_consume_skb_irq(skb); - dpriv->tx_skbuff[cur] = NULL; - ++dpriv->tx_dirty; - } else { - if (debug > 1) - netdev_err(dev, "Tx: NULL skb %d\n", - cur); - } - /* - * If the driver ends sending crap on the wire, it - * will be way easier to diagnose than the (not so) - * random freeze induced by null sized tx frames. - */ - tx_fd->data = tx_fd->next; - tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE); - tx_fd->complete = 0x00000000; - tx_fd->jiffies = 0; - - if (!(state &= ~Alls)) - goto try; - } - /* - * Transmit Data Underrun - */ - if (state & Xdu) { - netdev_err(dev, "Tx Data Underrun. Ask maintainer\n"); - dpriv->flags = NeedIDT; - /* Tx reset */ - writel(MTFi | Rdt, - dpriv->base_addr + 0x0c*dpriv->dev_id + CH0CFG); - writel(Action, dpriv->base_addr + GCMDR); - return; - } - if (state & Cts) { - netdev_info(dev, "CTS transition\n"); - if (!(state &= ~Cts)) /* DEBUG */ - goto try; - } - if (state & Xmr) { - /* Frame needs to be sent again - FIXME */ - netdev_err(dev, "Tx ReTx. Ask maintainer\n"); - if (!(state &= ~Xmr)) /* DEBUG */ - goto try; - } - if (state & Xpr) { - void __iomem *scc_addr; - unsigned long ring; - unsigned int i; - - /* - * - the busy condition happens (sometimes); - * - it doesn't seem to make the handler unreliable. - */ - for (i = 1; i; i <<= 1) { - if (!(scc_readl_star(dpriv, dev) & SccBusy)) - break; - } - if (!i) - netdev_info(dev, "busy in irq\n"); - - scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id; - /* Keep this order: IDT before IDR */ - if (dpriv->flags & NeedIDT) { - if (debug > 2) - dscc4_tx_print(dev, dpriv, "Xpr"); - ring = dpriv->tx_fd_dma + - (dpriv->tx_dirty%TX_RING_SIZE)* - sizeof(struct TxFD); - writel(ring, scc_addr + CH0BTDA); - dscc4_do_tx(dpriv, dev); - writel(MTFi | Idt, scc_addr + CH0CFG); - if (dscc4_do_action(dev, "IDT") < 0) - goto err_xpr; - dpriv->flags &= ~NeedIDT; - } - if (dpriv->flags & NeedIDR) { - ring = dpriv->rx_fd_dma + - (dpriv->rx_current%RX_RING_SIZE)* - sizeof(struct RxFD); - writel(ring, scc_addr + CH0BRDA); - dscc4_rx_update(dpriv, dev); - writel(MTFi | Idr, scc_addr + CH0CFG); - if (dscc4_do_action(dev, "IDR") < 0) - goto err_xpr; - dpriv->flags &= ~NeedIDR; - smp_wmb(); - /* Activate receiver and misc */ - scc_writel(0x08050008, dpriv, dev, CCR2); - } - err_xpr: - if (!(state &= ~Xpr)) - goto try; - } - if (state & Cd) { - if (debug > 0) - netdev_info(dev, "CD transition\n"); - if (!(state &= ~Cd)) /* DEBUG */ - goto try; - } - } else { /* ! SccEvt */ - if (state & Hi) { -#ifdef DSCC4_POLLING - while (!dscc4_tx_poll(dpriv, dev)); -#endif - netdev_info(dev, "Tx Hi\n"); - state &= ~Hi; - } - if (state & Err) { - netdev_info(dev, "Tx ERR\n"); - dev->stats.tx_errors++; - state &= ~Err; - } - } - goto try; -} - -static void dscc4_rx_irq(struct dscc4_pci_priv *priv, - struct dscc4_dev_priv *dpriv) -{ - struct net_device *dev = dscc4_to_dev(dpriv); - u32 state; - int cur; - -try: - cur = dpriv->iqrx_current%IRQ_RING_SIZE; - state = le32_to_cpu(dpriv->iqrx[cur]); - if (!state) - return; - dpriv->iqrx[cur] = 0; - dpriv->iqrx_current++; - - if (state_check(state, dpriv, dev, "Rx") < 0) - return; - - if (!(state & SccEvt)){ - struct RxFD *rx_fd; - - if (debug > 4) - printk(KERN_DEBUG "%s: Rx ISR = 0x%08x\n", dev->name, - state); - state &= 0x00ffffff; - if (state & Err) { /* Hold or reset */ - printk(KERN_DEBUG "%s: Rx ERR\n", dev->name); - cur = dpriv->rx_current%RX_RING_SIZE; - rx_fd = dpriv->rx_fd + cur; - /* - * Presume we're not facing a DMAC receiver reset. - * As We use the rx size-filtering feature of the - * DSCC4, the beginning of a new frame is waiting in - * the rx fifo. I bet a Receive Data Overflow will - * happen most of time but let's try and avoid it. - * Btw (as for RDO) if one experiences ERR whereas - * the system looks rather idle, there may be a - * problem with latency. In this case, increasing - * RX_RING_SIZE may help. - */ - //while (dpriv->rx_needs_refill) { - while (!(rx_fd->state1 & Hold)) { - rx_fd++; - cur++; - if (!(cur = cur%RX_RING_SIZE)) - rx_fd = dpriv->rx_fd; - } - //dpriv->rx_needs_refill--; - try_get_rx_skb(dpriv, dev); - if (!rx_fd->data) - goto try; - rx_fd->state1 &= ~Hold; - rx_fd->state2 = 0x00000000; - rx_fd->end = cpu_to_le32(0xbabeface); - //} - goto try; - } - if (state & Fi) { - dscc4_rx_skb(dpriv, dev); - goto try; - } - if (state & Hi ) { /* HI bit */ - netdev_info(dev, "Rx Hi\n"); - state &= ~Hi; - goto try; - } - } else { /* SccEvt */ - if (debug > 1) { - //FIXME: verifier la presence de tous les evenements - static struct { - u32 mask; - const char *irq_name; - } evts[] = { - { 0x00008000, "TIN"}, - { 0x00000020, "RSC"}, - { 0x00000010, "PCE"}, - { 0x00000008, "PLLA"}, - { 0, NULL} - }, *evt; - - for (evt = evts; evt->irq_name; evt++) { - if (state & evt->mask) { - printk(KERN_DEBUG "%s: %s\n", - dev->name, evt->irq_name); - if (!(state &= ~evt->mask)) - goto try; - } - } - } else { - if (!(state &= ~0x0000c03c)) - goto try; - } - if (state & Cts) { - netdev_info(dev, "CTS transition\n"); - if (!(state &= ~Cts)) /* DEBUG */ - goto try; - } - /* - * Receive Data Overflow (FIXME: fscked) - */ - if (state & Rdo) { - struct RxFD *rx_fd; - void __iomem *scc_addr; - int cur; - - //if (debug) - // dscc4_rx_dump(dpriv); - scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id; - - scc_patchl(RxActivate, 0, dpriv, dev, CCR2); - /* - * This has no effect. Why ? - * ORed with TxSccRes, one sees the CFG ack (for - * the TX part only). - */ - scc_writel(RxSccRes, dpriv, dev, CMDR); - dpriv->flags |= RdoSet; - - /* - * Let's try and save something in the received data. - * rx_current must be incremented at least once to - * avoid HOLD in the BRDA-to-be-pointed desc. - */ - do { - cur = dpriv->rx_current++%RX_RING_SIZE; - rx_fd = dpriv->rx_fd + cur; - if (!(rx_fd->state2 & DataComplete)) - break; - if (rx_fd->state2 & FrameAborted) { - dev->stats.rx_over_errors++; - rx_fd->state1 |= Hold; - rx_fd->state2 = 0x00000000; - rx_fd->end = cpu_to_le32(0xbabeface); - } else - dscc4_rx_skb(dpriv, dev); - } while (1); - - if (debug > 0) { - if (dpriv->flags & RdoSet) - printk(KERN_DEBUG - "%s: no RDO in Rx data\n", DRV_NAME); - } -#ifdef DSCC4_RDO_EXPERIMENTAL_RECOVERY - /* - * FIXME: must the reset be this violent ? - */ -#warning "FIXME: CH0BRDA" - writel(dpriv->rx_fd_dma + - (dpriv->rx_current%RX_RING_SIZE)* - sizeof(struct RxFD), scc_addr + CH0BRDA); - writel(MTFi|Rdr|Idr, scc_addr + CH0CFG); - if (dscc4_do_action(dev, "RDR") < 0) { - netdev_err(dev, "RDO recovery failed(RDR)\n"); - goto rdo_end; - } - writel(MTFi|Idr, scc_addr + CH0CFG); - if (dscc4_do_action(dev, "IDR") < 0) { - netdev_err(dev, "RDO recovery failed(IDR)\n"); - goto rdo_end; - } - rdo_end: -#endif - scc_patchl(0, RxActivate, dpriv, dev, CCR2); - goto try; - } - if (state & Cd) { - netdev_info(dev, "CD transition\n"); - if (!(state &= ~Cd)) /* DEBUG */ - goto try; - } - if (state & Flex) { - printk(KERN_DEBUG "%s: Flex. Ttttt...\n", DRV_NAME); - if (!(state &= ~Flex)) - goto try; - } - } -} - -/* - * I had expected the following to work for the first descriptor - * (tx_fd->state = 0xc0000000) - * - Hold=1 (don't try and branch to the next descripto); - * - No=0 (I want an empty data section, i.e. size=0); - * - Fe=1 (required by No=0 or we got an Err irq and must reset). - * It failed and locked solid. Thus the introduction of a dummy skb. - * Problem is acknowledged in errata sheet DS5. Joy :o/ - */ -static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv) -{ - struct sk_buff *skb; - - skb = dev_alloc_skb(DUMMY_SKB_SIZE); - if (skb) { - struct device *d = &dpriv->pci_priv->pdev->dev; - int last = dpriv->tx_dirty%TX_RING_SIZE; - struct TxFD *tx_fd = dpriv->tx_fd + last; - dma_addr_t addr; - - skb->len = DUMMY_SKB_SIZE; - skb_copy_to_linear_data(skb, version, - strlen(version) % DUMMY_SKB_SIZE); - addr = dma_map_single(d, skb->data, DUMMY_SKB_SIZE, - DMA_TO_DEVICE); - if (dma_mapping_error(d, addr)) { - dev_kfree_skb_any(skb); - return NULL; - } - tx_fd->state = FrameEnd | TO_STATE_TX(DUMMY_SKB_SIZE); - tx_fd->data = cpu_to_le32(addr); - dpriv->tx_skbuff[last] = skb; - } - return skb; -} - -static int dscc4_init_ring(struct net_device *dev) -{ - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - struct device *d = &dpriv->pci_priv->pdev->dev; - struct TxFD *tx_fd; - struct RxFD *rx_fd; - void *ring; - int i; - - ring = dma_alloc_coherent(d, RX_TOTAL_SIZE, &dpriv->rx_fd_dma, - GFP_KERNEL); - if (!ring) - goto err_out; - dpriv->rx_fd = rx_fd = (struct RxFD *) ring; - - ring = dma_alloc_coherent(d, TX_TOTAL_SIZE, &dpriv->tx_fd_dma, - GFP_KERNEL); - if (!ring) - goto err_free_dma_rx; - dpriv->tx_fd = tx_fd = (struct TxFD *) ring; - - memset(dpriv->tx_skbuff, 0, sizeof(struct sk_buff *)*TX_RING_SIZE); - dpriv->tx_dirty = 0xffffffff; - i = dpriv->tx_current = 0; - do { - tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE); - tx_fd->complete = 0x00000000; - /* FIXME: NULL should be ok - to be tried */ - tx_fd->data = cpu_to_le32(dpriv->tx_fd_dma); - (tx_fd++)->next = cpu_to_le32(dpriv->tx_fd_dma + - (++i%TX_RING_SIZE)*sizeof(*tx_fd)); - } while (i < TX_RING_SIZE); - - if (!dscc4_init_dummy_skb(dpriv)) - goto err_free_dma_tx; - - memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE); - i = dpriv->rx_dirty = dpriv->rx_current = 0; - do { - /* size set by the host. Multiple of 4 bytes please */ - rx_fd->state1 = HiDesc; - rx_fd->state2 = 0x00000000; - rx_fd->end = cpu_to_le32(0xbabeface); - rx_fd->state1 |= TO_STATE_RX(HDLC_MAX_MRU); - // FIXME: return value verifiee mais traitement suspect - if (try_get_rx_skb(dpriv, dev) >= 0) - dpriv->rx_dirty++; - (rx_fd++)->next = cpu_to_le32(dpriv->rx_fd_dma + - (++i%RX_RING_SIZE)*sizeof(*rx_fd)); - } while (i < RX_RING_SIZE); - - return 0; - -err_free_dma_tx: - dma_free_coherent(d, TX_TOTAL_SIZE, ring, dpriv->tx_fd_dma); -err_free_dma_rx: - dma_free_coherent(d, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma); -err_out: - return -ENOMEM; -} - -static void dscc4_remove_one(struct pci_dev *pdev) -{ - struct dscc4_pci_priv *ppriv; - struct dscc4_dev_priv *root; - void __iomem *ioaddr; - int i; - - ppriv = pci_get_drvdata(pdev); - root = ppriv->root; - - ioaddr = root->base_addr; - - dscc4_pci_reset(pdev, ioaddr); - - free_irq(pdev->irq, root); - dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), ppriv->iqcfg, - ppriv->iqcfg_dma); - for (i = 0; i < dev_per_card; i++) { - struct dscc4_dev_priv *dpriv = root + i; - - dscc4_release_ring(dpriv); - dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), - dpriv->iqrx, dpriv->iqrx_dma); - dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), - dpriv->iqtx, dpriv->iqtx_dma); - } - - dscc4_free1(pdev); - - iounmap(ioaddr); - - pci_release_region(pdev, 1); - pci_release_region(pdev, 0); - - pci_disable_device(pdev); -} - -static int dscc4_hdlc_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - struct dscc4_dev_priv *dpriv = dscc4_priv(dev); - - if (encoding != ENCODING_NRZ && - encoding != ENCODING_NRZI && - encoding != ENCODING_FM_MARK && - encoding != ENCODING_FM_SPACE && - encoding != ENCODING_MANCHESTER) - return -EINVAL; - - if (parity != PARITY_NONE && - parity != PARITY_CRC16_PR0_CCITT && - parity != PARITY_CRC16_PR1_CCITT && - parity != PARITY_CRC32_PR0_CCITT && - parity != PARITY_CRC32_PR1_CCITT) - return -EINVAL; - - dpriv->encoding = encoding; - dpriv->parity = parity; - return 0; -} - -#ifndef MODULE -static int __init dscc4_setup(char *str) -{ - int *args[] = { &debug, &quartz, NULL }, **p = args; - - while (*p && (get_option(&str, *p) == 2)) - p++; - return 1; -} - -__setup("dscc4.setup=", dscc4_setup); -#endif - -static const struct pci_device_id dscc4_pci_tbl[] = { - { PCI_VENDOR_ID_SIEMENS, PCI_DEVICE_ID_SIEMENS_DSCC4, - PCI_ANY_ID, PCI_ANY_ID, }, - { 0,} -}; -MODULE_DEVICE_TABLE(pci, dscc4_pci_tbl); - -static struct pci_driver dscc4_driver = { - .name = DRV_NAME, - .id_table = dscc4_pci_tbl, - .probe = dscc4_init_one, - .remove = dscc4_remove_one, -}; - -module_pci_driver(dscc4_driver); diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index d74349628db2..0e6a51525d91 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -1115,7 +1115,7 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN); LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); - lmc_trace(dev, "lmc_runnin_reset_out"); + lmc_trace(dev, "lmc_running_reset_out"); } |