summaryrefslogtreecommitdiff
path: root/drivers/net/wan
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan')
-rw-r--r--drivers/net/wan/Kconfig81
-rw-r--r--drivers/net/wan/cosa.c4
-rw-r--r--drivers/net/wan/hostess_sv11.c2
-rw-r--r--drivers/net/wan/pc300_drv.c2
-rw-r--r--drivers/net/wan/pc300_tty.c25
-rw-r--r--drivers/net/wan/x25_asy.c8
6 files changed, 63 insertions, 59 deletions
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index b5d0d7fb647a..21f76f51c95e 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -57,44 +57,6 @@ config COSA
The driver will be compiled as a module: the
module will be called cosa.
-config DSCC4
- tristate "Etinc PCISYNC serial board support"
- depends on WAN && PCI && m
- help
- Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
- DSCC4 chipset.
-
- This is supposed to work with the four port card. Take a look at
- <http://www.cogenit.fr/dscc4/> for further information about the
- driver.
-
- To compile this driver as a module, choose M here: the
- module will be called dscc4.
-
-config DSCC4_PCISYNC
- bool "Etinc PCISYNC features"
- depends on DSCC4
- help
- Due to Etinc's design choice for its PCISYNC cards, some operations
- are only allowed on specific ports of the DSCC4. This option is the
- only way for the driver to know that it shouldn't return a success
- code for these operations.
-
- Please say Y if your card is an Etinc's PCISYNC.
-
-config DSCC4_PCI_RST
- bool "Hard reset support"
- depends on DSCC4
- help
- Various DSCC4 bugs forbid any reliable software reset of the ASIC.
- As a replacement, some vendors provide a way to assert the PCI #RST
- pin of DSCC4 through the GPIO port of the card. If you choose Y,
- the driver will make use of this feature before module removal
- (i.e. rmmod). The feature is known to be available on Commtech's
- cards. Contact your manufacturer for details.
-
- Say Y if your card supports this feature.
-
#
# Lan Media's board. Currently 1000, 1200, 5200, 5245
#
@@ -323,6 +285,44 @@ config FARSYNC
To compile this driver as a module, choose M here: the
module will be called farsync.
+config DSCC4
+ tristate "Etinc PCISYNC serial board support"
+ depends on HDLC && PCI && m
+ help
+ Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
+ DSCC4 chipset.
+
+ This is supposed to work with the four port card. Take a look at
+ <http://www.cogenit.fr/dscc4/> for further information about the
+ driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dscc4.
+
+config DSCC4_PCISYNC
+ bool "Etinc PCISYNC features"
+ depends on DSCC4
+ help
+ Due to Etinc's design choice for its PCISYNC cards, some operations
+ are only allowed on specific ports of the DSCC4. This option is the
+ only way for the driver to know that it shouldn't return a success
+ code for these operations.
+
+ Please say Y if your card is an Etinc's PCISYNC.
+
+config DSCC4_PCI_RST
+ bool "Hard reset support"
+ depends on DSCC4
+ help
+ Various DSCC4 bugs forbid any reliable software reset of the ASIC.
+ As a replacement, some vendors provide a way to assert the PCI #RST
+ pin of DSCC4 through the GPIO port of the card. If you choose Y,
+ the driver will make use of this feature before module removal
+ (i.e. rmmod). The feature is known to be available on Commtech's
+ cards. Contact your manufacturer for details.
+
+ Say Y if your card supports this feature.
+
config DLCI
tristate "Frame Relay DLCI support"
depends on WAN
@@ -382,7 +382,7 @@ config SDLA
# Wan router core.
config WAN_ROUTER_DRIVERS
- bool "WAN router drivers"
+ tristate "WAN router drivers"
depends on WAN && WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
@@ -393,7 +393,8 @@ config WAN_ROUTER_DRIVERS
<file:Documentation/networking/wan-router.txt>.
Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
+ kernel except for how subordinate drivers may be built:
+ saying N will just cause the configurator to skip all
the questions about WAN router drivers.
If unsure, say N.
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index e1bf8b93f958..6c7dfb50143f 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -974,12 +974,12 @@ static int cosa_open(struct inode *inode, struct file *file)
unsigned long flags;
int n;
- if ((n=iminor(file->f_dentry->d_inode)>>CARD_MINOR_BITS)
+ if ((n=iminor(file->f_path.dentry->d_inode)>>CARD_MINOR_BITS)
>= nr_cards)
return -ENODEV;
cosa = cosa_cards+n;
- if ((n=iminor(file->f_dentry->d_inode)
+ if ((n=iminor(file->f_path.dentry->d_inode)
& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels)
return -ENODEV;
chan = cosa->chan + n;
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index a4f735723c41..a02c5fb40567 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -231,7 +231,7 @@ static struct sv11_device *sv11_init(int iobase, int irq)
return NULL;
}
- sv=(struct sv11_device *)kmalloc(sizeof(struct sv11_device), GFP_KERNEL);
+ sv = kmalloc(sizeof(struct sv11_device), GFP_KERNEL);
if(!sv)
goto fail3;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 36d1c3ff7078..62184dee377c 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -3455,7 +3455,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if ((err = pci_enable_device(pdev)) < 0)
return err;
- card = (pc300_t *) kmalloc(sizeof(pc300_t), GFP_KERNEL);
+ card = kmalloc(sizeof(pc300_t), GFP_KERNEL);
if (card == NULL) {
printk("PC300 found at RAM 0x%016llx, "
"but could not allocate card structure.\n",
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
index 931cbdf6d791..5873c346e7e9 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/net/wan/pc300_tty.c
@@ -125,8 +125,8 @@ static int cpc_tty_write_room(struct tty_struct *tty);
static int cpc_tty_chars_in_buffer(struct tty_struct *tty);
static void cpc_tty_flush_buffer(struct tty_struct *tty);
static void cpc_tty_hangup(struct tty_struct *tty);
-static void cpc_tty_rx_work(void *data);
-static void cpc_tty_tx_work(void *data);
+static void cpc_tty_rx_work(struct work_struct *work);
+static void cpc_tty_tx_work(struct work_struct *work);
static int cpc_tty_send_to_card(pc300dev_t *dev,void *buf, int len);
static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx);
static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char);
@@ -261,8 +261,8 @@ void cpc_tty_init(pc300dev_t *pc300dev)
cpc_tty->tty_minor = port + CPC_TTY_MINOR_START;
cpc_tty->pc300dev = pc300dev;
- INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work, (void *)cpc_tty);
- INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work, (void *)port);
+ INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work);
+ INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work);
cpc_tty->buf_rx.first = cpc_tty->buf_rx.last = NULL;
@@ -659,21 +659,23 @@ static void cpc_tty_hangup(struct tty_struct *tty)
* o call the line disc. read
* o free memory
*/
-static void cpc_tty_rx_work(void * data)
+static void cpc_tty_rx_work(struct work_struct *work)
{
+ st_cpc_tty_area *cpc_tty;
unsigned long port;
int i, j;
- st_cpc_tty_area *cpc_tty;
volatile st_cpc_rx_buf *buf;
char flags=0,flg_rx=1;
struct tty_ldisc *ld;
if (cpc_tty_cnt == 0) return;
-
for (i=0; (i < 4) && flg_rx ; i++) {
flg_rx = 0;
- port = (unsigned long)data;
+
+ cpc_tty = container_of(work, st_cpc_tty_area, tty_rx_work);
+ port = cpc_tty - cpc_tty_area;
+
for (j=0; j < CPC_TTY_NPORTS; j++) {
cpc_tty = &cpc_tty_area[port];
@@ -782,7 +784,7 @@ void cpc_tty_receive(pc300dev_t *pc300dev)
continue;
}
- new = (st_cpc_rx_buf *)kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC);
+ new = kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC);
if (new == 0) {
cpc_tty_rx_disc_frame(pc300chan);
continue;
@@ -882,9 +884,10 @@ void cpc_tty_receive(pc300dev_t *pc300dev)
* o if need call line discipline wakeup
* o call wake_up_interruptible
*/
-static void cpc_tty_tx_work(void *data)
+static void cpc_tty_tx_work(struct work_struct *work)
{
- st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *) data;
+ st_cpc_tty_area *cpc_tty =
+ container_of(work, st_cpc_tty_area, tty_tx_work);
struct tty_struct *tty;
CPC_TTY_DBG("%s: cpc_tty_tx_work init\n",cpc_tty->name);
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 9c3ccc669143..1c9edd97accd 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -123,8 +123,8 @@ static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
unsigned char *xbuff, *rbuff;
int len = 2* newmtu;
- xbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
- rbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
+ xbuff = kmalloc(len + 4, GFP_ATOMIC);
+ rbuff = kmalloc(len + 4, GFP_ATOMIC);
if (xbuff == NULL || rbuff == NULL)
{
@@ -465,11 +465,11 @@ static int x25_asy_open(struct net_device *dev)
len = dev->mtu * 2;
- sl->rbuff = (unsigned char *) kmalloc(len + 4, GFP_KERNEL);
+ sl->rbuff = kmalloc(len + 4, GFP_KERNEL);
if (sl->rbuff == NULL) {
goto norbuff;
}
- sl->xbuff = (unsigned char *) kmalloc(len + 4, GFP_KERNEL);
+ sl->xbuff = kmalloc(len + 4, GFP_KERNEL);
if (sl->xbuff == NULL) {
goto noxbuff;
}