diff options
Diffstat (limited to 'drivers/net/wan/sdla_chdlc.c')
| -rw-r--r-- | drivers/net/wan/sdla_chdlc.c | 4428 |
1 files changed, 0 insertions, 4428 deletions
diff --git a/drivers/net/wan/sdla_chdlc.c b/drivers/net/wan/sdla_chdlc.c deleted file mode 100644 index 496d29237e92..000000000000 --- a/drivers/net/wan/sdla_chdlc.c +++ /dev/null @@ -1,4428 +0,0 @@ -/***************************************************************************** -* sdla_chdlc.c WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module. -* -* Authors: Nenad Corbic <ncorbic@sangoma.com> -* Gideon Hack -* -* Copyright: (c) 1995-2001 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Feb 28, 2001 Nenad Corbic Updated if_tx_timeout() routine for -* 2.4.X kernels. -* Jan 25, 2001 Nenad Corbic Added a TTY Sync serial driver over the -* HDLC streaming protocol -* Added a TTY Async serial driver over the -* Async protocol. -* Dec 15, 2000 Nenad Corbic Updated for 2.4.X Kernel support -* Nov 13, 2000 Nenad Corbic Added true interface type encoding option. -* Tcpdump doesn't support CHDLC inteface -* types, to fix this "true type" option will set -* the interface type to RAW IP mode. -* Nov 07, 2000 Nenad Corbic Added security features for UDP debugging: -* Deny all and specify allowed requests. -* Jun 20, 2000 Nenad Corbic Fixed the API IP ERROR bug. Caused by the -* latest update. -* May 09, 2000 Nenad Corbic Option to bring down an interface -* upon disconnect. -* Mar 23, 2000 Nenad Corbic Improved task queue, bh handling. -* Mar 16, 2000 Nenad Corbic Fixed the SLARP Dynamic IP addressing. -* Mar 06, 2000 Nenad Corbic Bug Fix: corrupted mbox recovery. -* Feb 10, 2000 Gideon Hack Added ASYNC support. -* Feb 09, 2000 Nenad Corbic Fixed two shutdown bugs in update() and -* if_stats() functions. -* Jan 24, 2000 Nenad Corbic Fixed a startup wanpipe state racing, -* condition between if_open and isr. -* Jan 10, 2000 Nenad Corbic Added new socket API support. -* Dev 15, 1999 Nenad Corbic Fixed up header files for 2.0.X kernels -* Nov 20, 1999 Nenad Corbic Fixed zero length API bug. -* Sep 30, 1999 Nenad Corbic Fixed dynamic IP and route setup. -* Sep 23, 1999 Nenad Corbic Added SMP support, fixed tracing -* Sep 13, 1999 Nenad Corbic Split up Port 0 and 1 into separate devices. -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* Oct 30, 1998 Jaspreet Singh Added Support for CHDLC API (HDLC STREAMING). -* Oct 28, 1998 Jaspreet Singh Added Support for Dual Port CHDLC. -* Aug 07, 1998 David Fong Initial version. -*****************************************************************************/ - -#include <linux/module.h> -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/string.h> /* inline memset(), etc. */ -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/wanrouter.h> /* WAN router definitions */ -#include <linux/wanpipe.h> /* WANPIPE common user API definitions */ -#include <linux/if_arp.h> /* ARPHRD_* defines */ - - -#include <asm/uaccess.h> -#include <linux/inetdevice.h> -#include <linux/netdevice.h> - -#include <linux/in.h> /* sockaddr_in */ -#include <linux/inet.h> -#include <linux/if.h> -#include <asm/byteorder.h> /* htons(), etc. */ -#include <linux/sdlapci.h> -#include <asm/io.h> - -#include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */ -#include <linux/sdla_asy.h> /* CHDLC (async) API definitions */ - -#include <linux/if_wanpipe_common.h> /* Socket Driver common area */ -#include <linux/if_wanpipe.h> - -/* TTY Includes */ -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> - - -/****** Defines & Macros ****************************************************/ - -/* reasons for enabling the timer interrupt on the adapter */ -#define TMR_INT_ENABLED_UDP 0x01 -#define TMR_INT_ENABLED_UPDATE 0x02 -#define TMR_INT_ENABLED_CONFIG 0x10 - -#define MAX_IP_ERRORS 10 - -#define TTY_CHDLC_MAX_MTU 2000 -#define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */ -#define CHDLC_HDR_LEN 1 - -#define CHDLC_API 0x01 - -#define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" ) -#define MAX_BH_BUFF 10 - -//#define PRINT_DEBUG -#ifdef PRINT_DEBUG -#define dbg_printk(format, a...) printk(format, ## a) -#else -#define dbg_printk(format, a...) -#endif - -/******Data Structures*****************************************************/ - -/* This structure is placed in the private data area of the device structure. - * The card structure used to occupy the private area but now the following - * structure will incorporate the card structure along with CHDLC specific data - */ - -typedef struct chdlc_private_area -{ - wanpipe_common_t common; - sdla_t *card; - int TracingEnabled; /* For enabling Tracing */ - unsigned long curr_trace_addr; /* Used for Tracing */ - unsigned long start_trace_addr; - unsigned long end_trace_addr; - unsigned long base_addr_trace_buffer; - unsigned long end_addr_trace_buffer; - unsigned short number_trace_elements; - unsigned available_buffer_space; - unsigned long router_start_time; - unsigned char route_status; - unsigned char route_removed; - unsigned long tick_counter; /* For 5s timeout counter */ - unsigned long router_up_time; - u32 IP_address; /* IP addressing */ - u32 IP_netmask; - u32 ip_local; - u32 ip_remote; - u32 ip_local_tmp; - u32 ip_remote_tmp; - u8 ip_error; - u8 config_chdlc; - u8 config_chdlc_timeout; - unsigned char mc; /* Mulitcast support on/off */ - unsigned short udp_pkt_lgth; /* udp packet processing */ - char udp_pkt_src; - char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT]; - unsigned short timer_int_enabled; - char update_comms_stats; /* updating comms stats */ - - bh_data_t *bh_head; /* Circular buffer for chdlc_bh */ - unsigned long tq_working; - volatile int bh_write; - volatile int bh_read; - atomic_t bh_buff_used; - - unsigned char interface_down; - - /* Polling work queue entry. Each interface - * has its own work queue entry, which is used - * to defer events from the interrupt */ - struct work_struct poll_work; - struct timer_list poll_delay_timer; - - u8 gateway; - u8 true_if_encoding; - //FIXME: add driver stats as per frame relay! - -} chdlc_private_area_t; - -/* Route Status options */ -#define NO_ROUTE 0x00 -#define ADD_ROUTE 0x01 -#define ROUTE_ADDED 0x02 -#define REMOVE_ROUTE 0x03 - - -/* variable for keeping track of enabling/disabling FT1 monitor status */ -static int rCount = 0; - -/* variable for tracking how many interfaces to open for WANPIPE on the - two ports */ - -extern void disable_irq(unsigned int); -extern void enable_irq(unsigned int); - -/****** Function Prototypes *************************************************/ -/* WAN link driver entry points. These are called by the WAN router module. */ -static int update(struct wan_device* wandev); -static int new_if(struct wan_device* wandev, struct net_device* dev, - wanif_conf_t* conf); - -/* Network device interface */ -static int if_init(struct net_device* dev); -static int if_open(struct net_device* dev); -static int if_close(struct net_device* dev); -static int if_header(struct sk_buff* skb, struct net_device* dev, - unsigned short type, void* daddr, void* saddr, - unsigned len); - -static int if_rebuild_hdr (struct sk_buff *skb); -static struct net_device_stats* if_stats(struct net_device* dev); - -static int if_send(struct sk_buff* skb, struct net_device* dev); - -/* CHDLC Firmware interface functions */ -static int chdlc_configure (sdla_t* card, void* data); -static int chdlc_comm_enable (sdla_t* card); -static int chdlc_read_version (sdla_t* card, char* str); -static int chdlc_set_intr_mode (sdla_t* card, unsigned mode); -static int chdlc_send (sdla_t* card, void* data, unsigned len); -static int chdlc_read_comm_err_stats (sdla_t* card); -static int chdlc_read_op_stats (sdla_t* card); -static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb); - - -static int chdlc_disable_comm_shutdown (sdla_t *card); -static void if_tx_timeout(struct net_device *dev); - -/* Miscellaneous CHDLC Functions */ -static int set_chdlc_config (sdla_t* card); -static void init_chdlc_tx_rx_buff( sdla_t* card); -static int process_chdlc_exception(sdla_t *card); -static int process_global_exception(sdla_t *card); -static int update_comms_stats(sdla_t* card, - chdlc_private_area_t* chdlc_priv_area); -static int configure_ip (sdla_t* card); -static int unconfigure_ip (sdla_t* card); -static void process_route(sdla_t *card); -static void port_set_state (sdla_t *card, int); -static int config_chdlc (sdla_t *card); -static void disable_comm (sdla_t *card); - -static void trigger_chdlc_poll(struct net_device *dev); -static void chdlc_poll(struct net_device *dev); -static void chdlc_poll_delay (unsigned long dev_ptr); - - -/* Miscellaneous asynchronous interface Functions */ -static int set_asy_config (sdla_t* card); -static int asy_comm_enable (sdla_t* card); - -/* Interrupt handlers */ -static void wpc_isr (sdla_t* card); -static void rx_intr (sdla_t* card); -static void timer_intr(sdla_t *); - -/* Bottom half handlers */ -static void chdlc_work(struct net_device *dev); -static int chdlc_work_cleanup(struct net_device *dev); -static int bh_enqueue(struct net_device *dev, struct sk_buff *skb); - -/* Miscellaneous functions */ -static int chk_bcast_mcast_addr(sdla_t* card, struct net_device* dev, - struct sk_buff *skb); -static int reply_udp( unsigned char *data, unsigned int mbox_len ); -static int intr_test( sdla_t* card); -static int udp_pkt_type( struct sk_buff *skb , sdla_t* card); -static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card, - struct sk_buff *skb, struct net_device* dev, - chdlc_private_area_t* chdlc_priv_area); -static int process_udp_mgmt_pkt(sdla_t* card, struct net_device* dev, - chdlc_private_area_t* chdlc_priv_area); -static unsigned short calc_checksum (char *, int); -static void s508_lock (sdla_t *card, unsigned long *smp_flags); -static void s508_unlock (sdla_t *card, unsigned long *smp_flags); - - -static int Intr_test_counter; - -/* TTY Global Definitions */ - -#define NR_PORTS 4 -#define WAN_TTY_MAJOR 226 -#define WAN_TTY_MINOR 0 - -#define WAN_CARD(port) (tty_card_map[port]) -#define MIN_PORT 0 -#define MAX_PORT NR_PORTS-1 - -#define CRC_LENGTH 2 - -static int wanpipe_tty_init(sdla_t *card); -static void wanpipe_tty_receive(sdla_t *, unsigned, unsigned int); -static void wanpipe_tty_trigger_poll(sdla_t *card); - -static struct tty_driver serial_driver; -static int tty_init_cnt=0; - -static struct serial_state rs_table[NR_PORTS]; - -static char tty_driver_mode=WANOPT_TTY_SYNC; - -static char *opt_decode[] = {"NONE","CRTSCTS","XONXOFF-RX", - "CRTSCTS XONXOFF-RX","XONXOFF-TX", - "CRTSCTS XONXOFF-TX","CRTSCTS XONXOFF"}; -static char *p_decode[] = {"NONE","ODD","EVEN"}; - -static void* tty_card_map[NR_PORTS] = {NULL,NULL,NULL,NULL}; - - -/****** Public Functions ****************************************************/ - -/*============================================================================ - * Cisco HDLC protocol initialization routine. - * - * This routine is called by the main WANPIPE module during setup. At this - * point adapter is completely initialized and firmware is running. - * o read firmware version (to make sure it's alive) - * o configure adapter - * o initialize protocol-specific fields of the adapter data space. - * - * Return: 0 o.k. - * < 0 failure. - */ -int wpc_init (sdla_t* card, wandev_conf_t* conf) -{ - unsigned char port_num; - int err; - unsigned long max_permitted_baud = 0; - SHARED_MEMORY_INFO_STRUCT *flags; - - union - { - char str[80]; - } u; - volatile CHDLC_MAILBOX_STRUCT* mb; - CHDLC_MAILBOX_STRUCT* mb1; - unsigned long timeout; - - /* Verify configuration ID */ - if (conf->config_id != WANCONFIG_CHDLC) { - printk(KERN_INFO "%s: invalid configuration ID %u!\n", - card->devname, conf->config_id); - return -EINVAL; - } - - /* Find out which Port to use */ - if ((conf->comm_port == WANOPT_PRI) || (conf->comm_port == WANOPT_SEC)){ - if (card->next){ - - if (conf->comm_port != card->next->u.c.comm_port){ - card->u.c.comm_port = conf->comm_port; - }else{ - printk(KERN_INFO "%s: ERROR - %s port used!\n", - card->wandev.name, PORT(conf->comm_port)); - return -EINVAL; - } - }else{ - card->u.c.comm_port = conf->comm_port; - } - }else{ - printk(KERN_INFO "%s: ERROR - Invalid Port Selected!\n", - card->wandev.name); - return -EINVAL; - } - - - /* Initialize protocol-specific fields */ - if(card->hw.type != SDLA_S514){ - - if (card->u.c.comm_port == WANOPT_PRI){ - card->mbox = (void *) card->hw.dpmbase; - }else{ - card->mbox = (void *) card->hw.dpmbase + - SEC_BASE_ADDR_MB_STRUCT - PRI_BASE_ADDR_MB_STRUCT; - } - }else{ - /* for a S514 adapter, set a pointer to the actual mailbox in the */ - /* allocated virtual memory area */ - if (card->u.c.comm_port == WANOPT_PRI){ - card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT; - }else{ - card->mbox = (void *) card->hw.dpmbase + SEC_BASE_ADDR_MB_STRUCT; - } - } - - mb = mb1 = card->mbox; - - if (!card->configured){ - - /* The board will place an 'I' in the return code to indicate that it is - ready to accept commands. We expect this to be completed in less - than 1 second. */ - - timeout = jiffies; - while (mb->return_code != 'I') /* Wait 1s for board to initialize */ - if ((jiffies - timeout) > 1*HZ) break; - - if (mb->return_code != 'I') { - printk(KERN_INFO - "%s: Initialization not completed by adapter\n", - card->devname); - printk(KERN_INFO "Please contact Sangoma representative.\n"); - return -EIO; - } - } - - /* Read firmware version. Note that when adapter initializes, it - * clears the mailbox, so it may appear that the first command was - * executed successfully when in fact it was merely erased. To work - * around this, we execute the first command twice. - */ - - if (chdlc_read_version(card, u.str)) - return -EIO; - - printk(KERN_INFO "%s: Running Cisco HDLC firmware v%s\n", - card->devname, u.str); - - card->isr = &wpc_isr; - card->poll = NULL; - card->exec = NULL; - card->wandev.update = &update; - card->wandev.new_if = &new_if; - card->wandev.del_if = NULL; - card->wandev.udp_port = conf->udp_port; - card->disable_comm = &disable_comm; - card->wandev.new_if_cnt = 0; - - /* reset the number of times the 'update()' proc has been called */ - card->u.c.update_call_count = 0; - - card->wandev.ttl = conf->ttl; - card->wandev.interface = conf->interface; - - if ((card->u.c.comm_port == WANOPT_SEC && conf->interface == WANOPT_V35)&& - card->hw.type != SDLA_S514){ - printk(KERN_INFO "%s: ERROR - V35 Interface not supported on S508 %s port \n", - card->devname, PORT(card->u.c.comm_port)); - return -EIO; - } - - card->wandev.clocking = conf->clocking; - - port_num = card->u.c.comm_port; - - /* in API mode, we can configure for "receive only" buffering */ - if(card->hw.type == SDLA_S514) { - card->u.c.receive_only = conf->receive_only; - if(conf->receive_only) { - printk(KERN_INFO - "%s: Configured for 'receive only' mode\n", - card->devname); - } - } - - /* Setup Port Bps */ - - if(card->wandev.clocking) { - if((port_num == WANOPT_PRI) || card->u.c.receive_only) { - /* For Primary Port 0 */ - max_permitted_baud = - (card->hw.type == SDLA_S514) ? - PRI_MAX_BAUD_RATE_S514 : - PRI_MAX_BAUD_RATE_S508; - - }else if(port_num == WANOPT_SEC) { - /* For Secondary Port 1 */ - max_permitted_baud = - (card->hw.type == SDLA_S514) ? - SEC_MAX_BAUD_RATE_S514 : - SEC_MAX_BAUD_RATE_S508; - } - - if(conf->bps > max_permitted_baud) { - conf->bps = max_permitted_baud; - printk(KERN_INFO "%s: Baud too high!\n", - card->wandev.name); - printk(KERN_INFO "%s: Baud rate set to %lu bps\n", - card->wandev.name, max_permitted_baud); - } - card->wandev.bps = conf->bps; - }else{ - card->wandev.bps = 0; - } - - /* Setup the Port MTU */ - if((port_num == WANOPT_PRI) || card->u.c.receive_only) { - - /* For Primary Port 0 */ - card->wandev.mtu = - (conf->mtu >= MIN_LGTH_CHDLC_DATA_CFG) ? - min_t(unsigned int, conf->mtu, PRI_MAX_NO_DATA_BYTES_IN_FRAME) : - CHDLC_DFLT_DATA_LEN; - } else if(port_num == WANOPT_SEC) { - /* For Secondary Port 1 */ - card->wandev.mtu = - (conf->mtu >= MIN_LGTH_CHDLC_DATA_CFG) ? - min_t(unsigned int, conf->mtu, SEC_MAX_NO_DATA_BYTES_IN_FRAME) : - CHDLC_DFLT_DATA_LEN; - } - - /* Set up the interrupt status area */ - /* Read the CHDLC Configuration and obtain: - * Ptr to shared memory infor struct - * Use this pointer to calculate the value of card->u.c.flags ! - */ - mb1->buffer_length = 0; - mb1->command = READ_CHDLC_CONFIGURATION; - err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT; - if(err != COMMAND_OK) { - if(card->hw.type != SDLA_S514) - enable_irq(card->hw.irq); - - chdlc_error(card, err, mb1); - return -EIO; - } - - if(card->hw.type == SDLA_S514){ - card->u.c.flags = (void *)(card->hw.dpmbase + - (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)-> - ptr_shared_mem_info_struct)); - }else{ - card->u.c.flags = (void *)(card->hw.dpmbase + - (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)-> - ptr_shared_mem_info_struct % SDLA_WINDOWSIZE)); - } - - flags = card->u.c.flags; - - /* This is for the ports link state */ - card->wandev.state = WAN_DUALPORT; - card->u.c.state = WAN_DISCONNECTED; - - - if (!card->wandev.piggyback){ - int err; - - /* Perform interrupt testing */ - err = intr_test(card); - - if(err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) { - printk(KERN_INFO "%s: Interrupt test failed (%i)\n", - card->devname, Intr_test_counter); - printk(KERN_INFO "%s: Please choose another interrupt\n", - card->devname); - return -EIO; - } - - printk(KERN_INFO "%s: Interrupt test passed (%i)\n", - card->devname, Intr_test_counter); - card->configured = 1; - } - - if ((card->tty_opt=conf->tty) == WANOPT_YES){ - int err; - card->tty_minor = conf->tty_minor; - - /* On ASYNC connections internal clocking - * is mandatory */ - if ((card->u.c.async_mode = conf->tty_mode)){ - card->wandev.clocking = 1; - } - err=wanpipe_tty_init(card); - if (err){ - return err; - } - }else{ - - - if (chdlc_set_intr_mode(card, APP_INT_ON_TIMER)){ - printk (KERN_INFO "%s: " - "Failed to set interrupt triggers!\n", - card->devname); - return -EIO; - } - - /* Mask the Timer interrupt */ - flags->interrupt_info_struct.interrupt_permission &= - ~APP_INT_ON_TIMER; - } - - /* If we are using CHDLC in backup mode, this flag will - * indicate not to look for IP addresses in config_chdlc()*/ - card->u.c.backup = conf->backup; - - printk(KERN_INFO "\n"); - - return 0; -} - -/******* WAN Device Driver Entry Points *************************************/ - -/*============================================================================ - * Update device status & statistics - * This procedure is called when updating the PROC file system and returns - * various communications statistics. These statistics are accumulated from 3 - * different locations: - * 1) The 'if_stats' recorded for the device. - * 2) Communication error statistics on the adapter. - * 3) CHDLC operational statistics on the adapter. - * The board level statistics are read during a timer interrupt. Note that we - * read the error and operational statistics during consecitive timer ticks so - * as to minimize the time that we are inside the interrupt handler. - * - */ -static int update(struct wan_device* wandev) -{ - sdla_t* card = wandev->private; - struct net_device* dev; - volatile chdlc_private_area_t* chdlc_priv_area; - SHARED_MEMORY_INFO_STRUCT *flags; - unsigned long timeout; - - /* sanity checks */ - if((wandev == NULL) || (wandev->private == NULL)) - return -EFAULT; - - if(wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - /* more sanity checks */ - if(!card->u.c.flags) - return -ENODEV; - - if(test_bit(PERI_CRIT, (void*)&card->wandev.critical)) - return -EAGAIN; - - if((dev=card->wandev.dev) == NULL) - return -ENODEV; - - if((chdlc_priv_area=dev->priv) == NULL) - return -ENODEV; - - flags = card->u.c.flags; - if(chdlc_priv_area->update_comms_stats){ - return -EAGAIN; - } - - /* we will need 2 timer interrupts to complete the */ - /* reading of the statistics */ - chdlc_priv_area->update_comms_stats = 2; - flags->interrupt_info_struct.interrupt_permission |= APP_INT_ON_TIMER; - chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UPDATE; - - /* wait a maximum of 1 second for the statistics to be updated */ - timeout = jiffies; - for(;;) { - if(chdlc_priv_area->update_comms_stats == 0) - break; - if ((jiffies - timeout) > (1 * HZ)){ - chdlc_priv_area->update_comms_stats = 0; - chdlc_priv_area->timer_int_enabled &= - ~TMR_INT_ENABLED_UPDATE; - return -EAGAIN; - } - } - - return 0; -} - - -/*============================================================================ - * Create new logical channel. - * This routine is called by the router when ROUTER_IFNEW IOCTL is being - * handled. - * o parse media- and hardware-specific configuration - * o make sure that a new channel can be created - * o allocate resources, if necessary - * o prepare network device structure for registaration. - * - * Return: 0 o.k. - * < 0 failure (channel will not be created) - */ -static int new_if(struct wan_device* wandev, struct net_device* dev, - wanif_conf_t* conf) -{ - sdla_t* card = wandev->private; - chdlc_private_area_t* chdlc_priv_area; - - - printk(KERN_INFO "%s: Configuring Interface: %s\n", - card->devname, conf->name); - - if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) { - printk(KERN_INFO "%s: Invalid interface name!\n", - card->devname); - return -EINVAL; - } - - /* allocate and initialize private data */ - chdlc_priv_area = kmalloc(sizeof(chdlc_private_area_t), GFP_KERNEL); - - if(chdlc_priv_area == NULL) - return -ENOMEM; - - memset(chdlc_priv_area, 0, sizeof(chdlc_private_area_t)); - - chdlc_priv_area->card = card; - chdlc_priv_area->common.sk = NULL; - chdlc_priv_area->common.func = NULL; - - /* initialize data */ - strcpy(card->u.c.if_name, conf->name); - - if(card->wandev.new_if_cnt > 0) { - kfree(chdlc_priv_area); - return -EEXIST; - } - - card->wandev.new_if_cnt++; - - chdlc_priv_area->TracingEnabled = 0; - chdlc_priv_area->route_status = NO_ROUTE; - chdlc_priv_area->route_removed = 0; - - card->u.c.async_mode = conf->async_mode; - - /* setup for asynchronous mode */ - if(conf->async_mode) { - printk(KERN_INFO "%s: Configuring for asynchronous mode\n", - wandev->name); - - if(card->u.c.comm_port == WANOPT_PRI) { - printk(KERN_INFO - "%s:Asynchronous mode on secondary port only\n", - wandev->name); - kfree(chdlc_priv_area); - return -EINVAL; - } - - if(strcmp(conf->usedby, "WANPIPE") == 0) { - printk(KERN_INFO - "%s: Running in WANIPE Async Mode\n", wandev->name); - card->u.c.usedby = WANPIPE; - }else{ - card->u.c.usedby = API; - } - - if(!card->wandev.clocking) { - printk(KERN_INFO - "%s: Asynch. clocking must be 'Internal'\n", - wandev->name); - kfree(chdlc_priv_area); - return -EINVAL; - } - - if((card->wandev.bps < MIN_ASY_BAUD_RATE) || - (card->wandev.bps > MAX_ASY_BAUD_RATE)) { - printk(KERN_INFO "%s: Selected baud rate is invalid.\n", - wandev->name); - printk(KERN_INFO "Must be between %u and %u bps.\n", - MIN_ASY_BAUD_RATE, MAX_ASY_BAUD_RATE); - kfree(chdlc_priv_area); - return -EINVAL; - } - - card->u.c.api_options = 0; - if (conf->asy_data_trans == WANOPT_YES) { - card->u.c.api_options |= ASY_RX_DATA_TRANSPARENT; - } - - card->u.c.protocol_options = 0; - if (conf->rts_hs_for_receive == WANOPT_YES) { - card->u.c.protocol_options |= ASY_RTS_HS_FOR_RX; - } - if (conf->xon_xoff_hs_for_receive == WANOPT_YES) { - card->u.c.protocol_options |= ASY_XON_XOFF_HS_FOR_RX; - } - if (conf->xon_xoff_hs_for_transmit == WANOPT_YES) { - card->u.c.protocol_options |= ASY_XON_XOFF_HS_FOR_TX; - } - if (conf->dcd_hs_for_transmit == WANOPT_YES) { - card->u.c.protocol_options |= ASY_DCD_HS_FOR_TX; - } - if (conf->cts_hs_for_transmit == WANOPT_YES) { - card->u.c.protocol_options |= ASY_CTS_HS_FOR_TX; - } - - card->u.c.tx_bits_per_char = conf->tx_bits_per_char; - card->u.c.rx_bits_per_char = conf->rx_bits_per_char; - card->u.c.stop_bits = conf->stop_bits; - card->u.c.parity = conf->parity; - card->u.c.break_timer = conf->break_timer; - card->u.c.inter_char_timer = conf->inter_char_timer; - card->u.c.rx_complete_length = conf->rx_complete_length; - card->u.c.xon_char = conf->xon_char; - - } else { /* setup for synchronous mode */ - - card->u.c.protocol_options = 0; - if (conf->ignore_dcd == WANOPT_YES){ - card->u.c.protocol_options |= IGNORE_DCD_FOR_LINK_STAT; - } - if (conf->ignore_cts == WANOPT_YES){ - card->u.c.protocol_options |= IGNORE_CTS_FOR_LINK_STAT; - } - - if (conf->ignore_keepalive == WANOPT_YES) { - card->u.c.protocol_options |= - IGNORE_KPALV_FOR_LINK_STAT; - card->u.c.kpalv_tx = MIN_Tx_KPALV_TIMER; - card->u.c.kpalv_rx = MIN_Rx_KPALV_TIMER; - card->u.c.kpalv_err = MIN_KPALV_ERR_TOL; - - } else { /* Do not ignore keepalives */ - card->u.c.kpalv_tx = - ((conf->keepalive_tx_tmr - MIN_Tx_KPALV_TIMER) - >= 0) ? - min_t(unsigned int, conf->keepalive_tx_tmr,MAX_Tx_KPALV_TIMER) : - DEFAULT_Tx_KPALV_TIMER; - - card->u.c.kpalv_rx = - ((conf->keepalive_rx_tmr - MIN_Rx_KPALV_TIMER) - >= 0) ? - min_t(unsigned int, conf->keepalive_rx_tmr,MAX_Rx_KPALV_TIMER) : - DEFAULT_Rx_KPALV_TIMER; - - card->u.c.kpalv_err = - ((conf->keepalive_err_margin-MIN_KPALV_ERR_TOL) - >= 0) ? - min_t(unsigned int, conf->keepalive_err_margin, - MAX_KPALV_ERR_TOL) : - DEFAULT_KPALV_ERR_TOL; - } - - /* Setup slarp timer to control delay between slarps */ - card->u.c.slarp_timer = - ((conf->slarp_timer - MIN_SLARP_REQ_TIMER) >= 0) ? - min_t(unsigned int, conf->slarp_timer, MAX_SLARP_REQ_TIMER) : - DEFAULT_SLARP_REQ_TIMER; - - if (conf->hdlc_streaming == WANOPT_YES) { - printk(KERN_INFO "%s: Enabling HDLC STREAMING Mode\n", - wandev->name); - card->u.c.protocol_options = HDLC_STREAMING_MODE; - } - - if ((chdlc_priv_area->true_if_encoding = conf->true_if_encoding) == WANOPT_YES){ - printk(KERN_INFO - "%s: Enabling, true interface type encoding.\n", - card->devname); - } - - /* Setup wanpipe as a router (WANPIPE) or as an API */ - if( strcmp(conf->usedby, "WANPIPE") == 0) { - - printk(KERN_INFO "%s: Running in WANPIPE mode!\n", - wandev->name); - card->u.c.usedby = WANPIPE; - - /* Option to bring down the interface when - * the link goes down */ - if (conf->if_down){ - set_bit(DYN_OPT_ON,&chdlc_priv_area->interface_down); - printk(KERN_INFO - "%s: Dynamic interface configuration enabled\n", - card->devname); - } - - } else if( strcmp(conf->usedby, "API") == 0) { - card->u.c.usedby = API; - printk(KERN_INFO "%s: Running in API mode !\n", - wandev->name); - } - } - - /* Tells us that if this interface is a - * gateway or not */ - if ((chdlc_priv_area->gateway = conf->gateway) == WANOPT_YES){ - printk(KERN_INFO "%s: Interface %s is set as a gateway.\n", - card->devname,card->u.c.if_name); - } - - /* Get Multicast Information */ - chdlc_priv_area->mc = conf->mc; - - /* prepare network device data space for registration */ - strcpy(dev->name,card->u.c.if_name); - - dev->init = &if_init; - dev->priv = chdlc_priv_area; - - /* Initialize the polling work routine */ - INIT_WORK(&chdlc_priv_area->poll_work, (void*)(void*)chdlc_poll, dev); - - /* Initialize the polling delay timer */ - init_timer(&chdlc_priv_area->poll_delay_timer); - chdlc_priv_area->poll_delay_timer.data = (unsigned long)dev; - chdlc_priv_area->poll_delay_timer.function = chdlc_poll_delay; - - printk(KERN_INFO "\n"); - - return 0; -} - - -/****** Network Device Interface ********************************************/ - -/*============================================================================ - * Initialize Linux network interface. - * - * This routine is called only once for each interface, during Linux network - * interface registration. Returning anything but zero will fail interface - * registration. - */ -static int if_init(struct net_device* dev) -{ - chdlc_private_area_t* chdlc_priv_area = dev->priv; - sdla_t* card = chdlc_priv_area->card; - struct wan_device* wandev = &card->wandev; - - /* Initialize device driver entry points */ - dev->open = &if_open; - dev->stop = &if_close; - dev->hard_header = &if_header; - dev->rebuild_header = &if_rebuild_hdr; - dev->hard_start_xmit = &if_send; - dev->get_stats = &if_stats; - dev->tx_timeout = &if_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - - /* Initialize media-specific parameters */ - dev->flags |= IFF_POINTOPOINT; - dev->flags |= IFF_NOARP; - - /* Enable Mulitcasting if user selected */ - if (chdlc_priv_area->mc == WANOPT_YES){ - dev->flags |= IFF_MULTICAST; - } - - if (chdlc_priv_area->true_if_encoding){ - dev->type = ARPHRD_HDLC; /* This breaks the tcpdump */ - }else{ - dev->type = ARPHRD_PPP; - } - - dev->mtu = card->wandev.mtu; - /* for API usage, add the API header size to the requested MTU size */ - if(card->u.c.usedby == API) { - dev->mtu += sizeof(api_tx_hdr_t); - } - - dev->hard_header_len = CHDLC_HDR_LEN; - - /* Initialize hardware parameters */ - dev->irq = wandev->irq; - dev->dma = wandev->dma; - dev->base_addr = wandev->ioport; - dev->mem_start = wandev->maddr; - dev->mem_end = wandev->maddr + wandev->msize - 1; - - /* Set transmit buffer queue length - * If too low packets will not be retransmitted - * by stack. - */ - dev->tx_queue_len = 100; - SET_MODULE_OWNER(dev); - - return 0; -} - -/*============================================================================ - * Open network interface. - * o enable communications and interrupts. - * o prevent module from unloading by incrementing use count - * - * Return 0 if O.k. or errno. - */ -static int if_open(struct net_device* dev) -{ - chdlc_private_area_t* chdlc_priv_area = dev->priv; - sdla_t* card = chdlc_priv_area->card; - struct timeval tv; - int err = 0; - - /* Only one open per interface is allowed */ - - if (netif_running(dev)) - return -EBUSY; - - /* Initialize the work queue entry */ - chdlc_priv_area->tq_working=0; - - INIT_WORK(&chdlc_priv_area->common.wanpipe_work, - (void *)(void *)chdlc_work, dev); - - /* Allocate and initialize BH circular buffer */ - /* Add 1 to MAX_BH_BUFF so we don't have test with (MAX_BH_BUFF-1) */ - chdlc_priv_area->bh_head = kmalloc((sizeof(bh_data_t)*(MAX_BH_BUFF+1)),GFP_ATOMIC); - memset(chdlc_priv_area->bh_head,0,(sizeof(bh_data_t)*(MAX_BH_BUFF+1))); - atomic_set(&chdlc_priv_area->bh_buff_used, 0); - - do_gettimeofday(&tv); - chdlc_priv_area->router_start_time = tv.tv_sec; - - netif_start_queue(dev); - - wanpipe_open(card); - - /* TTY is configured during wanpipe_set_termios - * call, not here */ - if (card->tty_opt) - return err; - - set_bit(0,&chdlc_priv_area->config_chdlc); - chdlc_priv_area->config_chdlc_timeout=jiffies; - - /* Start the CHDLC configuration after 1sec delay. - * This will give the interface initilization time - * to finish its configuration */ - mod_timer(&chdlc_priv_area->poll_delay_timer, jiffies + HZ); - return err; -} - -/*============================================================================ - * Close network interface. - * o if this is the last close, then disable communications and interrupts. - * o reset flags. - */ -static int if_close(struct net_device* dev) -{ - chdlc_private_area_t* chdlc_priv_area = dev->priv; - sdla_t* card = chdlc_priv_area->card; - - if (chdlc_priv_area->bh_head){ - int i; - struct sk_buff *skb; - - for (i=0; i<(MAX_BH_BUFF+1); i++){ - skb = ((bh_data_t *)&chdlc_priv_area->bh_head[i])->skb; - if (skb != NULL){ - dev_kfree_skb_any(skb); - } - } - kfree(chdlc_priv_area->bh_head); - chdlc_priv_area->bh_head=NULL; - } - - netif_stop_queue(dev); - wanpipe_close(card); - del_timer(&chdlc_priv_area->poll_delay_timer); - return 0; -} - -static void disable_comm (sdla_t *card) -{ - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - - if (card->u.c.comm_enabled){ - chdlc_disable_comm_shutdown (card); - }else{ - flags->interrupt_info_struct.interrupt_permission = 0; - } - - if (!tty_init_cnt) - return; - - if (card->tty_opt){ - struct serial_state * state; - if (!(--tty_init_cnt)){ - int e1; - serial_driver.refcount=0; - - if ((e1 = tty_unregister_driver(&serial_driver))) - printk("SERIAL: failed to unregister serial driver (%d)\n", - e1); - printk(KERN_INFO "%s: Unregistering TTY Driver, Major %i\n", - card->devname,WAN_TTY_MAJOR); - } - card->tty=NULL; - tty_card_map[card->tty_minor]=NULL; - state = &rs_table[card->tty_minor]; - memset(state, 0, sizeof(*state)); - } - return; -} - - -/*============================================================================ - * Build media header. - * - * The trick here is to put packet type (Ethertype) into 'protocol' field of - * the socket buffer, so that we don't forget it. If packet type is not - * supported, set skb->protocol to 0 and discard packet later. - * - * Return: media header length. - */ -static int if_header(struct sk_buff* skb, struct net_device* dev, - unsigned short type, void* daddr, void* saddr, - unsigned len) -{ - skb->protocol = htons(type); - - return CHDLC_HDR_LEN; -} - - -/*============================================================================ - * Handle transmit timeout event from netif watchdog - */ -static void if_tx_timeout(struct net_device *dev) -{ - chdlc_private_area_t* chan = dev->priv; - sdla_t *card = chan->card; - - /* If our device stays busy for at least 5 seconds then we will - * kick start the device by making dev->tbusy = 0. We expect - * that our device never stays busy more than 5 seconds. So this - * is only used as a last resort. - */ - - ++card->wandev.stats.collisions; - - printk (KERN_INFO "%s: Transmit timed out on %s\n", card->devname,dev->name); - netif_wake_queue (dev); -} - - - -/*============================================================================ - * Re-build media header. - * - * Return: 1 physical address resolved. - * 0 physical address not resolved - */ -static int if_rebuild_hdr (struct sk_buff *skb) -{ - return 1; -} - - -/*============================================================================ - * Send a packet on a network interface. - * o set tbusy flag (marks start of the transmission) to block a timer-based - * transmit from overlapping. - * o check link state. If link is not up, then drop the packet. - * o execute adapter send command. - * o free socket buffer - * - * Return: 0 complete (socket buffer must be freed) - * non-0 packet may be re-transmitted (tbusy must be set) - * - * Notes: - * 1. This routine is called either by the protocol stack or by the "net - * bottom half" (with interrupts enabled). - * 2. Setting tbusy flag will inhibit further transmit requests from the - * protocol stack and can be used for flow control with protocol layer. - */ -static int if_send(struct sk_buff* skb, struct net_device* dev) -{ - chdlc_private_area_t *chdlc_priv_area = dev->priv; - sdla_t *card = chdlc_priv_area->card; - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - INTERRUPT_INFORMATION_STRUCT *chdlc_int = &flags->interrupt_info_struct; - int udp_type = 0; - unsigned long smp_flags; - int err=0; - - netif_stop_queue(dev); - - if (skb == NULL){ - /* If we get here, some higher layer thinks we've missed an - * tx-done interrupt. - */ - printk(KERN_INFO "%s: interface %s got kicked!\n", - card->devname, dev->name); - - netif_wake_queue(dev); - return 0; - } - - if (ntohs(skb->protocol) != htons(PVC_PROT)){ - - /* check the udp packet type */ - - udp_type = udp_pkt_type(skb, card); - - if (udp_type == UDP_CPIPE_TYPE){ - if(store_udp_mgmt_pkt(UDP_PKT_FRM_STACK, card, skb, dev, - chdlc_priv_area)){ - chdlc_int->interrupt_permission |= - APP_INT_ON_TIMER; - } - netif_start_queue(dev); - return 0; - } - - /* check to see if the source IP address is a broadcast or */ - /* multicast IP address */ - if(chk_bcast_mcast_addr(card, dev, skb)){ - ++card->wandev.stats.tx_dropped; - dev_kfree_skb_any(skb); - netif_start_queue(dev); - return 0; - } - } - - /* Lock the 508 Card: SMP is supported */ - if(card->hw.type != SDLA_S514){ - s508_lock(card,&smp_flags); - } - - if(test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)) { - - printk(KERN_INFO "%s: Critical in if_send: %lx\n", - card->wandev.name,card->wandev.critical); - ++card->wandev.stats.tx_dropped; - netif_start_queue(dev); - goto if_send_exit_crit; - } - - if(card->u.c.state != WAN_CONNECTED){ - ++card->wandev.stats.tx_dropped; - netif_start_queue(dev); - - }else if(!skb->protocol){ - ++card->wandev.stats.tx_errors; - netif_start_queue(dev); - - }else { - void* data = skb->data; - unsigned len = skb->len; - unsigned char attr; - - /* If it's an API packet pull off the API - * header. Also check that the packet size - * is larger than the API header - */ - if (card->u.c.usedby == API){ - api_tx_hdr_t* api_tx_hdr; - - /* discard the frame if we are configured for */ - /* 'receive only' mode or if there is no data */ - if (card->u.c.receive_only || - (len <= sizeof(api_tx_hdr_t))) { - - ++card->wandev.stats.tx_dropped; - netif_start_queue(dev); - goto if_send_exit_crit; - } - - api_tx_hdr = (api_tx_hdr_t *)data; - attr = api_tx_hdr->attr; - data += sizeof(api_tx_hdr_t); - len -= sizeof(api_tx_hdr_t); - } - - if(chdlc_send(card, data, len)) { - netif_stop_queue(dev); - }else{ - ++card->wandev.stats.tx_packets; - card->wandev.stats.tx_bytes += len; - - netif_start_queue(dev); - - dev->trans_start = jiffies; - } - } - -if_send_exit_crit: - - if (!(err=netif_queue_stopped(dev))) { - dev_kfree_skb_any(skb); - }else{ - chdlc_priv_area->tick_counter = jiffies; - chdlc_int->interrupt_permission |= APP_INT_ON_TX_FRAME; - } - - clear_bit(SEND_CRIT, (void*)&card->wandev.critical); - if(card->hw.type != SDLA_S514){ - s508_unlock(card,&smp_flags); - } - - return err; -} - - -/*============================================================================ - * Check to see if the packet to be transmitted contains a broadcast or - * multicast source IP address. - */ - -static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev, - struct sk_buff *skb) -{ - u32 src_ip_addr; - u32 broadcast_ip_addr = 0; - struct in_device *in_dev; - - /* read the IP source address from the outgoing packet */ - src_ip_addr = *(u32 *)(skb->data + 12); - - /* read the IP broadcast address for the device */ - in_dev = dev->ip_ptr; - if(in_dev != NULL) { - struct in_ifaddr *ifa= in_dev->ifa_list; - if(ifa != NULL) - broadcast_ip_addr = ifa->ifa_broadcast; - else - return 0; - } - - /* check if the IP Source Address is a Broadcast address */ - if((dev->flags & IFF_BROADCAST) && (src_ip_addr == broadcast_ip_addr)) { - printk(KERN_INFO "%s: Broadcast Source Address silently discarded\n", - card->devname); - return 1; - } - - /* check if the IP Source Address is a Multicast address */ - if((ntohl(src_ip_addr) >= 0xE0000001) && - (ntohl(src_ip_addr) <= 0xFFFFFFFE)) { - printk(KERN_INFO "%s: Multicast Source Address silently discarded\n", - card->devname); - return 1; - } - - return 0; -} - - -/*============================================================================ - * Reply to UDP Management system. - * Return length of reply. - */ -static int reply_udp( unsigned char *data, unsigned int mbox_len ) -{ - - unsigned short len, udp_length, temp, ip_length; - unsigned long ip_temp; - int even_bound = 0; - chdlc_udp_pkt_t *c_udp_pkt = (chdlc_udp_pkt_t *)data; - - /* Set length of packet */ - len = sizeof(ip_pkt_t)+ - sizeof(udp_pkt_t)+ - sizeof(wp_mgmt_t)+ - sizeof(cblock_t)+ - sizeof(trace_info_t)+ - mbox_len; - - /* fill in UDP reply */ - c_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY; - - /* fill in UDP length */ - udp_length = sizeof(udp_pkt_t)+ - sizeof(wp_mgmt_t)+ - sizeof(cblock_t)+ - sizeof(trace_info_t)+ - mbox_len; - - /* put it on an even boundary */ - if ( udp_length & 0x0001 ) { - udp_length += 1; - len += 1; - even_bound = 1; - } - - temp = (udp_length<<8)|(udp_length>>8); - c_udp_pkt->udp_pkt.udp_length = temp; - - /* swap UDP ports */ - temp = c_udp_pkt->udp_pkt.udp_src_port; - c_udp_pkt->udp_pkt.udp_src_port = - c_udp_pkt->udp_pkt.udp_dst_port; - c_udp_pkt->udp_pkt.udp_dst_port = temp; - - /* add UDP pseudo header */ - temp = 0x1100; - *((unsigned short *)(c_udp_pkt->data+mbox_len+even_bound)) = temp; - temp = (udp_length<<8)|(udp_length>>8); - *((unsigned short *)(c_udp_pkt->data+mbox_len+even_bound+2)) = temp; - - - /* calculate UDP checksum */ - c_udp_pkt->udp_pkt.udp_checksum = 0; - c_udp_pkt->udp_pkt.udp_checksum = calc_checksum(&data[UDP_OFFSET],udp_length+UDP_OFFSET); - - /* fill in IP length */ - ip_length = len; - temp = (ip_length<<8)|(ip_length>>8); - c_udp_pkt->ip_pkt.total_length = temp; - - /* swap IP addresses */ - ip_temp = c_udp_pkt->ip_pkt.ip_src_address; - c_udp_pkt->ip_pkt.ip_src_address = c_udp_pkt->ip_pkt.ip_dst_address; - c_udp_pkt->ip_pkt.ip_dst_address = ip_temp; - - /* fill in IP checksum */ - c_udp_pkt->ip_pkt.hdr_checksum = 0; - c_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data,sizeof(ip_pkt_t)); - - return len; - -} /* reply_udp */ - -unsigned short calc_checksum (char *data, int len) -{ - unsigned short temp; - unsigned long sum=0; - int i; - - for( i = 0; i <len; i+=2 ) { - memcpy(&temp,&data[i],2); - sum += (unsigned long)temp; - } - - while (sum >> 16 ) { - sum = (sum & 0xffffUL) + (sum >> 16); - } - - temp = (unsigned short)sum; - temp = ~temp; - - if( temp == 0 ) - temp = 0xffff; - - return temp; -} - - -/*============================================================================ - * Get ethernet-style interface statistics. - * Return a pointer to struct enet_statistics. - */ -static struct net_device_stats* if_stats(struct net_device* dev) -{ - sdla_t *my_card; - chdlc_private_area_t* chdlc_priv_area; - - if ((chdlc_priv_area=dev->priv) == NULL) - return NULL; - - my_card = chdlc_priv_area->card; - return &my_card->wandev.stats; -} - - -/****** Cisco HDLC Firmware Interface Functions *******************************/ - -/*============================================================================ - * Read firmware code version. - * Put code version as ASCII string in str. - */ -static int chdlc_read_version (sdla_t* card, char* str) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - int len; - char err; - mb->buffer_length = 0; - mb->command = READ_CHDLC_CODE_VERSION; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - - if(err != COMMAND_OK) { - chdlc_error(card,err,mb); - } - else if (str) { /* is not null */ - len = mb->buffer_length; - memcpy(str, mb->data, len); - str[len] = '\0'; - } - return (err); -} - -/*----------------------------------------------------------------------------- - * Configure CHDLC firmware. - */ -static int chdlc_configure (sdla_t* card, void* data) -{ - int err; - CHDLC_MAILBOX_STRUCT *mailbox = card->mbox; - int data_length = sizeof(CHDLC_CONFIGURATION_STRUCT); - - mailbox->buffer_length = data_length; - memcpy(mailbox->data, data, data_length); - mailbox->command = SET_CHDLC_CONFIGURATION; - err = sdla_exec(mailbox) ? mailbox->return_code : CMD_TIMEOUT; - - if (err != COMMAND_OK) chdlc_error (card, err, mailbox); - - return err; -} - - -/*============================================================================ - * Set interrupt mode -- HDLC Version. - */ - -static int chdlc_set_intr_mode (sdla_t* card, unsigned mode) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - CHDLC_INT_TRIGGERS_STRUCT* int_data = - (CHDLC_INT_TRIGGERS_STRUCT *)mb->data; - int err; - - int_data->CHDLC_interrupt_triggers = mode; - int_data->IRQ = card->hw.irq; - int_data->interrupt_timer = 1; - - mb->buffer_length = sizeof(CHDLC_INT_TRIGGERS_STRUCT); - mb->command = SET_CHDLC_INTERRUPT_TRIGGERS; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) - chdlc_error (card, err, mb); - return err; -} - - -/*=========================================================== - * chdlc_disable_comm_shutdown - * - * Shutdown() disables the communications. We must - * have a sparate functions, because we must not - * call chdlc_error() hander since the private - * area has already been replaced */ - -static int chdlc_disable_comm_shutdown (sdla_t *card) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - CHDLC_INT_TRIGGERS_STRUCT* int_data = - (CHDLC_INT_TRIGGERS_STRUCT *)mb->data; - int err; - - /* Disable Interrutps */ - int_data->CHDLC_interrupt_triggers = 0; - int_data->IRQ = card->hw.irq; - int_data->interrupt_timer = 1; - - mb->buffer_length = sizeof(CHDLC_INT_TRIGGERS_STRUCT); - mb->command = SET_CHDLC_INTERRUPT_TRIGGERS; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - - /* Disable Communications */ - - if (card->u.c.async_mode) { - mb->command = DISABLE_ASY_COMMUNICATIONS; - }else{ - mb->command = DISABLE_CHDLC_COMMUNICATIONS; - } - - mb->buffer_length = 0; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - - card->u.c.comm_enabled = 0; - - return 0; -} - -/*============================================================================ - * Enable communications. - */ - -static int chdlc_comm_enable (sdla_t* card) -{ - int err; - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - - mb->buffer_length = 0; - mb->command = ENABLE_CHDLC_COMMUNICATIONS; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) - chdlc_error(card, err, mb); - else - card->u.c.comm_enabled = 1; - - return err; -} - -/*============================================================================ - * Read communication error statistics. - */ -static int chdlc_read_comm_err_stats (sdla_t* card) -{ - int err; - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - - mb->buffer_length = 0; - mb->command = READ_COMMS_ERROR_STATS; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) - chdlc_error(card,err,mb); - return err; -} - - -/*============================================================================ - * Read CHDLC operational statistics. - */ -static int chdlc_read_op_stats (sdla_t* card) -{ - int err; - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - - mb->buffer_length = 0; - mb->command = READ_CHDLC_OPERATIONAL_STATS; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) - chdlc_error(card,err,mb); - return err; -} - - -/*============================================================================ - * Update communications error and general packet statistics. - */ -static int update_comms_stats(sdla_t* card, - chdlc_private_area_t* chdlc_priv_area) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - COMMS_ERROR_STATS_STRUCT* err_stats; - CHDLC_OPERATIONAL_STATS_STRUCT *op_stats; - - /* on the first timer interrupt, read the comms error statistics */ - if(chdlc_priv_area->update_comms_stats == 2) { - if(chdlc_read_comm_err_stats(card)) - return 1; - err_stats = (COMMS_ERROR_STATS_STRUCT *)mb->data; - card->wandev.stats.rx_over_errors = - err_stats->Rx_overrun_err_count; - card->wandev.stats.rx_crc_errors = - err_stats->CRC_err_count; - card->wandev.stats.rx_frame_errors = - err_stats->Rx_abort_count; - card->wandev.stats.rx_fifo_errors = - err_stats->Rx_dis_pri_bfrs_full_count; - card->wandev.stats.rx_missed_errors = - card->wandev.stats.rx_fifo_errors; - card->wandev.stats.tx_aborted_errors = - err_stats->sec_Tx_abort_count; - } - - /* on the second timer interrupt, read the operational statistics */ - else { - if(chdlc_read_op_stats(card)) - return 1; - op_stats = (CHDLC_OPERATIONAL_STATS_STRUCT *)mb->data; - card->wandev.stats.rx_length_errors = - (op_stats->Rx_Data_discard_short_count + - op_stats->Rx_Data_discard_long_count); - } - - return 0; -} - -/*============================================================================ - * Send packet. - * Return: 0 - o.k. - * 1 - no transmit buffers available - */ -static int chdlc_send (sdla_t* card, void* data, unsigned len) -{ - CHDLC_DATA_TX_STATUS_EL_STRUCT *txbuf = card->u.c.txbuf; - - if (txbuf->opp_flag) - return 1; - - sdla_poke(&card->hw, txbuf->ptr_data_bfr, data, len); - - txbuf->frame_length = len; - txbuf->opp_flag = 1; /* start transmission */ - - /* Update transmit buffer control fields */ - card->u.c.txbuf = ++txbuf; - - if ((void*)txbuf > card->u.c.txbuf_last) - card->u.c.txbuf = card->u.c.txbuf_base; - - return 0; -} - -/****** Firmware Error Handler **********************************************/ - -/*============================================================================ - * Firmware error handler. - * This routine is called whenever firmware command returns non-zero - * return code. - * - * Return zero if previous command has to be cancelled. - */ -static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb) -{ - unsigned cmd = mb->command; - - switch (err) { - - case CMD_TIMEOUT: - printk(KERN_INFO "%s: command 0x%02X timed out!\n", - card->devname, cmd); - break; - - case S514_BOTH_PORTS_SAME_CLK_MODE: - if(cmd == SET_CHDLC_CONFIGURATION) { - printk(KERN_INFO - "%s: Configure both ports for the same clock source\n", - card->devname); - break; - } - - default: - printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n", - card->devname, cmd, err); - } - - return 0; -} - - -/********** Bottom Half Handlers ********************************************/ - -/* NOTE: There is no API, BH support for Kernels lower than 2.2.X. - * DO NOT INSERT ANY CODE HERE, NOTICE THE - * PREPROCESSOR STATEMENT ABOVE, UNLESS YOU KNOW WHAT YOU ARE - * DOING */ - -static void chdlc_work(struct net_device * dev) -{ - chdlc_private_area_t* chan = dev->priv; - sdla_t *card = chan->card; - struct sk_buff *skb; - - if (atomic_read(&chan->bh_buff_used) == 0){ - clear_bit(0, &chan->tq_working); - return; - } - - while (atomic_read(&chan->bh_buff_used)){ - - skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb; - - if (skb != NULL){ - - if (chan->common.sk == NULL || chan->common.func == NULL){ - ++card->wandev.stats.rx_dropped; - dev_kfree_skb_any(skb); - chdlc_work_cleanup(dev); - continue; - } - - if (chan->common.func(skb,dev,chan->common.sk) != 0){ - /* Sock full cannot send, queue us for another - * try */ - atomic_set(&chan->common.receive_block,1); - return; - }else{ - chdlc_work_cleanup(dev); - } - }else{ - chdlc_work_cleanup(dev); - } - } - clear_bit(0, &chan->tq_working); - - return; -} - -static int chdlc_work_cleanup(struct net_device *dev) -{ - chdlc_private_area_t* chan = dev->priv; - - ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL; - - if (chan->bh_read == MAX_BH_BUFF){ - chan->bh_read=0; - }else{ - ++chan->bh_read; - } - - atomic_dec(&chan->bh_buff_used); - return 0; -} - - - -static int bh_enqueue(struct net_device *dev, struct sk_buff *skb) -{ - /* Check for full */ - chdlc_private_area_t* chan = dev->priv; - sdla_t *card = chan->card; - - if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ - ++card->wandev.stats.rx_dropped; - dev_kfree_skb_any(skb); - return 1; - } - - ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb; - - if (chan->bh_write == MAX_BH_BUFF){ - chan->bh_write=0; - }else{ - ++chan->bh_write; - } - - atomic_inc(&chan->bh_buff_used); - - return 0; -} - -/* END OF API BH Support */ - - -/****** Interrupt Handlers **************************************************/ - -/*============================================================================ - * Cisco HDLC interrupt service routine. - */ -static void wpc_isr (sdla_t* card) -{ - struct net_device* dev; - SHARED_MEMORY_INFO_STRUCT* flags = NULL; - int i; - sdla_t *my_card; - - - /* Check for which port the interrupt has been generated - * Since Secondary Port is piggybacking on the Primary - * the check must be done here. - */ - - flags = card->u.c.flags; - if (!flags->interrupt_info_struct.interrupt_type){ - /* Check for a second port (piggybacking) */ - if ((my_card = card->next)){ - flags = my_card->u.c.flags; - if (flags->interrupt_info_struct.interrupt_type){ - card = my_card; - card->isr(card); - return; - } - } - } - - flags = card->u.c.flags; - card->in_isr = 1; - dev = card->wandev.dev; - - /* If we get an interrupt with no network device, stop the interrupts - * and issue an error */ - if (!card->tty_opt && !dev && - flags->interrupt_info_struct.interrupt_type != - COMMAND_COMPLETE_APP_INT_PEND){ - - goto isr_done; - } - - /* if critical due to peripheral operations - * ie. update() or getstats() then reset the interrupt and - * wait for the board to retrigger. - */ - if(test_bit(PERI_CRIT, (void*)&card->wandev.critical)) { - printk(KERN_INFO "ISR CRIT TO PERI\n"); - goto isr_done; - } - - /* On a 508 Card, if critical due to if_send - * Major Error !!! */ - if(card->hw.type != SDLA_S514) { - if(test_bit(SEND_CRIT, (void*)&card->wandev.critical)) { - printk(KERN_INFO "%s: Critical while in ISR: %lx\n", - card->devname, card->wandev.critical); - card->in_isr = 0; - flags->interrupt_info_struct.interrupt_type = 0; - return; - } - } - - switch(flags->interrupt_info_struct.interrupt_type) { - - case RX_APP_INT_PEND: /* 0x01: receive interrupt */ - rx_intr(card); - break; - - case TX_APP_INT_PEND: /* 0x02: transmit interrupt */ - flags->interrupt_info_struct.interrupt_permission &= - ~APP_INT_ON_TX_FRAME; - - if (card->tty_opt){ - wanpipe_tty_trigger_poll(card); - break; - } - - if (dev && netif_queue_stopped(dev)){ - if (card->u.c.usedby == API){ - netif_start_queue(dev); - wakeup_sk_bh(dev); - }else{ - netif_wake_queue(dev); - } - } - break; - - case COMMAND_COMPLETE_APP_INT_PEND:/* 0x04: cmd cplt */ - ++ Intr_test_counter; - break; - - case CHDLC_EXCEP_COND_APP_INT_PEND: /* 0x20 */ - process_chdlc_exception(card); - break; - - case GLOBAL_EXCEP_COND_APP_INT_PEND: - process_global_exception(card); - break; - - case TIMER_APP_INT_PEND: - timer_intr(card); - break; - - default: - printk(KERN_INFO "%s: spurious interrupt 0x%02X!\n", - card->devname, - flags->interrupt_info_struct.interrupt_type); - printk(KERN_INFO "Code name: "); - for(i = 0; i < 4; i ++) - printk(KERN_INFO "%c", - flags->global_info_struct.codename[i]); - printk(KERN_INFO "\nCode version: "); - for(i = 0; i < 4; i ++) - printk(KERN_INFO "%c", - flags->global_info_struct.codeversion[i]); - printk(KERN_INFO "\n"); - break; - } - -isr_done: - - card->in_isr = 0; - flags->interrupt_info_struct.interrupt_type = 0; - return; -} - -/*============================================================================ - * Receive interrupt handler. - */ -static void rx_intr (sdla_t* card) -{ - struct net_device *dev; - chdlc_private_area_t *chdlc_priv_area; - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - CHDLC_DATA_RX_STATUS_EL_STRUCT *rxbuf = card->u.c.rxmb; - struct sk_buff *skb; - unsigned len; - unsigned addr = rxbuf->ptr_data_bfr; - void *buf; - int i,udp_type; - - if (rxbuf->opp_flag != 0x01) { - printk(KERN_INFO - "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n", - card->devname, (unsigned)rxbuf, rxbuf->opp_flag); - printk(KERN_INFO "Code name: "); - for(i = 0; i < 4; i ++) - printk(KERN_INFO "%c", - flags->global_info_struct.codename[i]); - printk(KERN_INFO "\nCode version: "); - for(i = 0; i < 4; i ++) - printk(KERN_INFO "%c", - flags->global_info_struct.codeversion[i]); - printk(KERN_INFO "\n"); - - - /* Bug Fix: Mar 6 2000 - * If we get a corrupted mailbox, it measn that driver - * is out of sync with the firmware. There is no recovery. - * If we don't turn off all interrupts for this card - * the machine will crash. - */ - printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname); - printk(KERN_INFO "Please contact Sangoma Technologies !\n"); - chdlc_set_intr_mode(card,0); - return; - } - - len = rxbuf->frame_length; - - if (card->tty_opt){ - - if (rxbuf->error_flag){ - goto rx_exit; - } - - if (len <= CRC_LENGTH){ - goto rx_exit; - } - - if (!card->u.c.async_mode){ - len -= CRC_LENGTH; - } - - wanpipe_tty_receive(card,addr,len); - goto rx_exit; - } - - dev = card->wandev.dev; - - if (!dev){ - goto rx_exit; - } - - if (!netif_running(dev)) - goto rx_exit; - - chdlc_priv_area = dev->priv; - - - /* Allocate socket buffer */ - skb = dev_alloc_skb(len); - - if (skb == NULL) { - printk(KERN_INFO "%s: no socket buffers available!\n", - card->devname); - ++card->wandev.stats.rx_dropped; - goto rx_exit; - } - - /* Copy data to the socket buffer */ - if((addr + len) > card->u.c.rx_top + 1) { - unsigned tmp = card->u.c.rx_top - addr + 1; - buf = skb_put(skb, tmp); - sdla_peek(&card->hw, addr, buf, tmp); - addr = card->u.c.rx_base; - len -= tmp; - } - - buf = skb_put(skb, len); - sdla_peek(&card->hw, addr, buf, len); - - skb->protocol = htons(ETH_P_IP); - - card->wandev.stats.rx_packets ++; - card->wandev.stats.rx_bytes += skb->len; - udp_type = udp_pkt_type( skb, card ); - - if(udp_type == UDP_CPIPE_TYPE) { - if(store_udp_mgmt_pkt(UDP_PKT_FRM_NETWORK, - card, skb, dev, chdlc_priv_area)) { - flags->interrupt_info_struct. - interrupt_permission |= - APP_INT_ON_TIMER; - } - } else if(card->u.c.usedby == API) { - - api_rx_hdr_t* api_rx_hdr; - skb_push(skb, sizeof(api_rx_hdr_t)); - api_rx_hdr = (api_rx_hdr_t*)&skb->data[0x00]; - api_rx_hdr->error_flag = rxbuf->error_flag; - api_rx_hdr->time_stamp = rxbuf->time_stamp; - - skb->protocol = htons(PVC_PROT); - skb->mac.raw = skb->data; - skb->dev = dev; - skb->pkt_type = WAN_PACKET_DATA; - - bh_enqueue(dev, skb); - - if (!test_and_set_bit(0,&chdlc_priv_area->tq_working)) - wanpipe_queue_work(&chdlc_priv_area->common.wanpipe_work); - }else{ - /* FIXME: we should check to see if the received packet is a - multicast packet so that we can increment the multicast - statistic - ++ chdlc_priv_area->if_stats.multicast; - */ - /* Pass it up the protocol stack */ - - skb->dev = dev; - skb->mac.raw = skb->data; - netif_rx(skb); - dev->last_rx = jiffies; - } - -rx_exit: - /* Release buffer element and calculate a pointer to the next one */ - rxbuf->opp_flag = 0x00; - card->u.c.rxmb = ++ rxbuf; - if((void*)rxbuf > card->u.c.rxbuf_last){ - card->u.c.rxmb = card->u.c.rxbuf_base; - } -} - -/*============================================================================ - * Timer interrupt handler. - * The timer interrupt is used for two purposes: - * 1) Processing udp calls from 'cpipemon'. - * 2) Reading board-level statistics for updating the proc file system. - */ -void timer_intr(sdla_t *card) -{ - struct net_device* dev; - chdlc_private_area_t* chdlc_priv_area = NULL; - SHARED_MEMORY_INFO_STRUCT* flags = NULL; - - if ((dev = card->wandev.dev)==NULL){ - flags = card->u.c.flags; - flags->interrupt_info_struct.interrupt_permission &= - ~APP_INT_ON_TIMER; - return; - } - - chdlc_priv_area = dev->priv; - - if (chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_CONFIG) { - if (!config_chdlc(card)){ - chdlc_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_CONFIG; - } - } - - /* process a udp call if pending */ - if(chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_UDP) { - process_udp_mgmt_pkt(card, dev, - chdlc_priv_area); - chdlc_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_UDP; - } - - /* read the communications statistics if required */ - if(chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_UPDATE) { - update_comms_stats(card, chdlc_priv_area); - if(!(-- chdlc_priv_area->update_comms_stats)) { - chdlc_priv_area->timer_int_enabled &= - ~TMR_INT_ENABLED_UPDATE; - } - } - - /* only disable the timer interrupt if there are no udp or statistic */ - /* updates pending */ - if(!chdlc_priv_area->timer_int_enabled) { - flags = card->u.c.flags; - flags->interrupt_info_struct.interrupt_permission &= - ~APP_INT_ON_TIMER; - } -} - -/*------------------------------------------------------------------------------ - Miscellaneous Functions - - set_chdlc_config() used to set configuration options on the board -------------------------------------------------------------------------------*/ - -static int set_chdlc_config(sdla_t* card) -{ - CHDLC_CONFIGURATION_STRUCT cfg; - - memset(&cfg, 0, sizeof(CHDLC_CONFIGURATION_STRUCT)); - - if(card->wandev.clocking){ - cfg.baud_rate = card->wandev.bps; - } - - cfg.line_config_options = (card->wandev.interface == WANOPT_RS232) ? - INTERFACE_LEVEL_RS232 : INTERFACE_LEVEL_V35; - - cfg.modem_config_options = 0; - cfg.modem_status_timer = 100; - - cfg.CHDLC_protocol_options = card->u.c.protocol_options; - - if (card->tty_opt){ - cfg.CHDLC_API_options = DISCARD_RX_ERROR_FRAMES; - } - - cfg.percent_data_buffer_for_Tx = (card->u.c.receive_only) ? 0 : 50; - cfg.CHDLC_statistics_options = (CHDLC_TX_DATA_BYTE_COUNT_STAT | - CHDLC_RX_DATA_BYTE_COUNT_STAT); - - if (card->tty_opt){ - card->wandev.mtu = TTY_CHDLC_MAX_MTU; - } - cfg.max_CHDLC_data_field_length = card->wandev.mtu; - cfg.transmit_keepalive_timer = card->u.c.kpalv_tx; - cfg.receive_keepalive_timer = card->u.c.kpalv_rx; - cfg.keepalive_error_tolerance = card->u.c.kpalv_err; - cfg.SLARP_request_timer = card->u.c.slarp_timer; - - if (cfg.SLARP_request_timer) { - cfg.IP_address = 0; - cfg.IP_netmask = 0; - - }else if (card->wandev.dev){ - struct net_device *dev = card->wandev.dev; - chdlc_private_area_t *chdlc_priv_area = dev->priv; - - struct in_device *in_dev = dev->ip_ptr; - - if(in_dev != NULL) { - struct in_ifaddr *ifa = in_dev->ifa_list; - - if (ifa != NULL ) { - cfg.IP_address = ntohl(ifa->ifa_local); - cfg.IP_netmask = ntohl(ifa->ifa_mask); - chdlc_priv_area->IP_address = ntohl(ifa->ifa_local); - chdlc_priv_area->IP_netmask = ntohl(ifa->ifa_mask); - } - } - - /* FIXME: We must re-think this message in next release - if((cfg.IP_address & 0x000000FF) > 2) { - printk(KERN_WARNING "\n"); - printk(KERN_WARNING " WARNING:%s configured with an\n", - card->devname); - printk(KERN_WARNING " invalid local IP address.\n"); - printk(KERN_WARNING " Slarp pragmatics will fail.\n"); - printk(KERN_WARNING " IP address should be of the\n"); - printk(KERN_WARNING " format A.B.C.1 or A.B.C.2.\n"); - } - */ - } - - return chdlc_configure(card, &cfg); -} - - -/*----------------------------------------------------------------------------- - set_asy_config() used to set asynchronous configuration options on the board -------------------------------------------------------------------------------*/ - -static int set_asy_config(sdla_t* card) -{ - - ASY_CONFIGURATION_STRUCT cfg; - CHDLC_MAILBOX_STRUCT *mailbox = card->mbox; - int err; - - memset(&cfg, 0, sizeof(ASY_CONFIGURATION_STRUCT)); - - if(card->wandev.clocking) - cfg.baud_rate = card->wandev.bps; - - cfg.line_config_options = (card->wandev.interface == WANOPT_RS232) ? - INTERFACE_LEVEL_RS232 : INTERFACE_LEVEL_V35; - - cfg.modem_config_options = 0; - cfg.asy_API_options = card->u.c.api_options; - cfg.asy_protocol_options = card->u.c.protocol_options; - cfg.Tx_bits_per_char = card->u.c.tx_bits_per_char; - cfg.Rx_bits_per_char = card->u.c.rx_bits_per_char; - cfg.stop_bits = card->u.c.stop_bits; - cfg.parity = card->u.c.parity; - cfg.break_timer = card->u.c.break_timer; - cfg.asy_Rx_inter_char_timer = card->u.c.inter_char_timer; - cfg.asy_Rx_complete_length = card->u.c.rx_complete_length; - cfg.XON_char = card->u.c.xon_char; - cfg.XOFF_char = card->u.c.xoff_char; - cfg.asy_statistics_options = (CHDLC_TX_DATA_BYTE_COUNT_STAT | - CHDLC_RX_DATA_BYTE_COUNT_STAT); - - mailbox->buffer_length = sizeof(ASY_CONFIGURATION_STRUCT); - memcpy(mailbox->data, &cfg, mailbox->buffer_length); - mailbox->command = SET_ASY_CONFIGURATION; - err = sdla_exec(mailbox) ? mailbox->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) - chdlc_error (card, err, mailbox); - return err; -} - -/*============================================================================ - * Enable asynchronous communications. - */ - -static int asy_comm_enable (sdla_t* card) -{ - - int err; - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - - mb->buffer_length = 0; - mb->command = ENABLE_ASY_COMMUNICATIONS; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK && card->wandev.dev) - chdlc_error(card, err, mb); - - if (!err) - card->u.c.comm_enabled = 1; - - return err; -} - -/*============================================================================ - * Process global exception condition - */ -static int process_global_exception(sdla_t *card) -{ - CHDLC_MAILBOX_STRUCT* mbox = card->mbox; - int err; - - mbox->buffer_length = 0; - mbox->command = READ_GLOBAL_EXCEPTION_CONDITION; - err = sdla_exec(mbox) ? mbox->return_code : CMD_TIMEOUT; - - if(err != CMD_TIMEOUT ){ - - switch(mbox->return_code) { - - case EXCEP_MODEM_STATUS_CHANGE: - - printk(KERN_INFO "%s: Modem status change\n", - card->devname); - - switch(mbox->data[0] & (DCD_HIGH | CTS_HIGH)) { - case (DCD_HIGH): - printk(KERN_INFO "%s: DCD high, CTS low\n",card->devname); - break; - case (CTS_HIGH): - printk(KERN_INFO "%s: DCD low, CTS high\n",card->devname); - break; - case ((DCD_HIGH | CTS_HIGH)): - printk(KERN_INFO "%s: DCD high, CTS high\n",card->devname); - break; - default: - printk(KERN_INFO "%s: DCD low, CTS low\n",card->devname); - break; - } - break; - - case EXCEP_TRC_DISABLED: - printk(KERN_INFO "%s: Line trace disabled\n", - card->devname); - break; - - case EXCEP_IRQ_TIMEOUT: - printk(KERN_INFO "%s: IRQ timeout occurred\n", - card->devname); - break; - - case 0x17: - if (card->tty_opt){ - if (card->tty && card->tty_open){ - printk(KERN_INFO - "%s: Modem Hangup Exception: Hanging Up!\n", - card->devname); - tty_hangup(card->tty); - } - break; - } - - /* If TTY is not used just drop throught */ - - default: - printk(KERN_INFO "%s: Global exception %x\n", - card->devname, mbox->return_code); - break; - } - } - return 0; -} - - -/*============================================================================ - * Process chdlc exception condition - */ -static int process_chdlc_exception(sdla_t *card) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - int err; - - mb->buffer_length = 0; - mb->command = READ_CHDLC_EXCEPTION_CONDITION; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if(err != CMD_TIMEOUT) { - - switch (err) { - - case EXCEP_LINK_ACTIVE: - port_set_state(card, WAN_CONNECTED); - trigger_chdlc_poll(card->wandev.dev); - break; - - case EXCEP_LINK_INACTIVE_MODEM: - port_set_state(card, WAN_DISCONNECTED); - unconfigure_ip(card); - trigger_chdlc_poll(card->wandev.dev); - break; - - case EXCEP_LINK_INACTIVE_KPALV: - port_set_state(card, WAN_DISCONNECTED); - printk(KERN_INFO "%s: Keepalive timer expired.\n", - card->devname); - unconfigure_ip(card); - trigger_chdlc_poll(card->wandev.dev); - break; - - case EXCEP_IP_ADDRESS_DISCOVERED: - if (configure_ip(card)) - return -1; - break; - - case EXCEP_LOOPBACK_CONDITION: - printk(KERN_INFO "%s: Loopback Condition Detected.\n", - card->devname); - break; - - case NO_CHDLC_EXCEP_COND_TO_REPORT: - printk(KERN_INFO "%s: No exceptions reported.\n", - card->devname); - break; - } - - } - return 0; -} - - -/*============================================================================ - * Configure IP from SLARP negotiation - * This adds dynamic routes when SLARP has provided valid addresses - */ - -static int configure_ip (sdla_t* card) -{ - struct net_device *dev = card->wandev.dev; - chdlc_private_area_t *chdlc_priv_area; - char err; - - if (!dev) - return 0; - - chdlc_priv_area = dev->priv; - - - /* set to discover */ - if(card->u.c.slarp_timer != 0x00) { - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - CHDLC_CONFIGURATION_STRUCT *cfg; - - mb->buffer_length = 0; - mb->command = READ_CHDLC_CONFIGURATION; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - - if(err != COMMAND_OK) { - chdlc_error(card,err,mb); - return -1; - } - - cfg = (CHDLC_CONFIGURATION_STRUCT *)mb->data; - chdlc_priv_area->IP_address = cfg->IP_address; - chdlc_priv_area->IP_netmask = cfg->IP_netmask; - - /* Set flag to add route */ - chdlc_priv_area->route_status = ADD_ROUTE; - - /* The idea here is to add the route in the poll routine. - This way, we aren't in interrupt context when adding routes */ - trigger_chdlc_poll(dev); - } - - return 0; -} - - -/*============================================================================ - * Un-Configure IP negotiated by SLARP - * This removes dynamic routes when the link becomes inactive. - */ - -static int unconfigure_ip (sdla_t* card) -{ - struct net_device *dev = card->wandev.dev; - chdlc_private_area_t *chdlc_priv_area; - - if (!dev) - return 0; - - chdlc_priv_area= dev->priv; - - if (chdlc_priv_area->route_status == ROUTE_ADDED) { - - /* Note: If this function is called, the - * port state has been DISCONNECTED. This state - * change will trigger a poll_disconnected - * function, that will check for this condition. - */ - chdlc_priv_area->route_status = REMOVE_ROUTE; - - } - return 0; -} - -/*============================================================================ - * Routine to add/remove routes - * Called like a polling routine when Routes are flagged to be added/removed. - */ - -static void process_route (sdla_t *card) -{ - struct net_device *dev = card->wandev.dev; - unsigned char port_num; - chdlc_private_area_t *chdlc_priv_area = NULL; - u32 local_IP_addr = 0; - u32 remote_IP_addr = 0; - u32 IP_netmask, IP_addr; - int err = 0; - struct in_device *in_dev; - mm_segment_t fs; - struct ifreq if_info; - struct sockaddr_in *if_data1, *if_data2; - - chdlc_priv_area = dev->priv; - port_num = card->u.c.comm_port; - - /* Bug Fix Mar 16 2000 - * AND the IP address to the Mask before checking - * the last two bits. */ - - if((chdlc_priv_area->route_status == ADD_ROUTE) && - ((chdlc_priv_area->IP_address & ~chdlc_priv_area->IP_netmask) > 2)) { - - printk(KERN_INFO "%s: Dynamic route failure.\n",card->devname); - - if(card->u.c.slarp_timer) { - u32 addr_net = htonl(chdlc_priv_area->IP_address); - - printk(KERN_INFO "%s: Bad IP address %u.%u.%u.%u received\n", - card->devname, - NIPQUAD(addr_net)); - printk(KERN_INFO "%s: from remote station.\n", - card->devname); - - }else{ - u32 addr_net = htonl(chdlc_priv_area->IP_address); - - printk(KERN_INFO "%s: Bad IP address %u.%u.%u.%u issued\n", - card->devname, - NIPQUAD(addr_net)); - printk(KERN_INFO "%s: to remote station. Local\n", - card->devname); - printk(KERN_INFO "%s: IP address must be A.B.C.1\n", - card->devname); - printk(KERN_INFO "%s: or A.B.C.2.\n",card->devname); - } - - /* remove the route due to the IP address error condition */ - chdlc_priv_area->route_status = REMOVE_ROUTE; - err = 1; - } - - /* If we are removing a route with bad IP addressing, then use the */ - /* locally configured IP addresses */ - if((chdlc_priv_area->route_status == REMOVE_ROUTE) && err) { - - /* do not remove a bad route that has already been removed */ - if(chdlc_priv_area->route_removed) { - return; - } - - in_dev = dev->ip_ptr; - - if(in_dev != NULL) { - struct in_ifaddr *ifa = in_dev->ifa_list; - if (ifa != NULL ) { - local_IP_addr = ifa->ifa_local; - IP_netmask = ifa->ifa_mask; - } - } - }else{ - /* According to Cisco HDLC, if the point-to-point address is - A.B.C.1, then we are the opposite (A.B.C.2), and vice-versa. - */ - IP_netmask = ntohl(chdlc_priv_area->IP_netmask); - remote_IP_addr = ntohl(chdlc_priv_area->IP_address); - - - /* If Netmask is 255.255.255.255 the local address - * calculation will fail. Default it back to 255.255.255.0 */ - if (IP_netmask == 0xffffffff) - IP_netmask &= 0x00ffffff; - - /* Bug Fix Mar 16 2000 - * AND the Remote IP address with IP netmask, instead - * of static netmask of 255.255.255.0 */ - local_IP_addr = (remote_IP_addr & IP_netmask) + - (~remote_IP_addr & ntohl(0x0003)); - - if(!card->u.c.slarp_timer) { - IP_addr = local_IP_addr; - local_IP_addr = remote_IP_addr; - remote_IP_addr = IP_addr; - } - } - - fs = get_fs(); /* Save file system */ - set_fs(get_ds()); /* Get user space block */ - - /* Setup a structure for adding/removing routes */ - memset(&if_info, 0, sizeof(if_info)); - strcpy(if_info.ifr_name, dev->name); - - switch (chdlc_priv_area->route_status) { - - case ADD_ROUTE: - - if(!card->u.c.slarp_timer) { - if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr; - if_data2->sin_addr.s_addr = remote_IP_addr; - if_data2->sin_family = AF_INET; - err = devinet_ioctl(SIOCSIFDSTADDR, &if_info); - } else { - if_data1 = (struct sockaddr_in *)&if_info.ifr_addr; - if_data1->sin_addr.s_addr = local_IP_addr; - if_data1->sin_family = AF_INET; - if(!(err = devinet_ioctl(SIOCSIFADDR, &if_info))){ - if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr; - if_data2->sin_addr.s_addr = remote_IP_addr; - if_data2->sin_family = AF_INET; - err = devinet_ioctl(SIOCSIFDSTADDR, &if_info); - } - } - - if(err) { - printk(KERN_INFO "%s: Add route %u.%u.%u.%u failed (%d)\n", - card->devname, NIPQUAD(remote_IP_addr), err); - } else { - ((chdlc_private_area_t *)dev->priv)->route_status = ROUTE_ADDED; - printk(KERN_INFO "%s: Dynamic route added.\n", - card->devname); - printk(KERN_INFO "%s: Local IP addr : %u.%u.%u.%u\n", - card->devname, NIPQUAD(local_IP_addr)); - printk(KERN_INFO "%s: Remote IP addr: %u.%u.%u.%u\n", - card->devname, NIPQUAD(remote_IP_addr)); - chdlc_priv_area->route_removed = 0; - } - break; - - - case REMOVE_ROUTE: - - /* Change the local ip address of the interface to 0. - * This will also delete the destination route. - */ - if(!card->u.c.slarp_timer) { - if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr; - if_data2->sin_addr.s_addr = 0; - if_data2->sin_family = AF_INET; - err = devinet_ioctl(SIOCSIFDSTADDR, &if_info); - } else { - if_data1 = (struct sockaddr_in *)&if_info.ifr_addr; - if_data1->sin_addr.s_addr = 0; - if_data1->sin_family = AF_INET; - err = devinet_ioctl(SIOCSIFADDR,&if_info); - - } - if(err) { - printk(KERN_INFO - "%s: Remove route %u.%u.%u.%u failed, (err %d)\n", - card->devname, NIPQUAD(remote_IP_addr), - err); - } else { - ((chdlc_private_area_t *)dev->priv)->route_status = - NO_ROUTE; - printk(KERN_INFO "%s: Dynamic route removed: %u.%u.%u.%u\n", - card->devname, NIPQUAD(local_IP_addr)); - chdlc_priv_area->route_removed = 1; - } - break; - } - - set_fs(fs); /* Restore file system */ - -} - - -/*============================================================================= - * Store a UDP management packet for later processing. - */ - -static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card, - struct sk_buff *skb, struct net_device* dev, - chdlc_private_area_t* chdlc_priv_area) -{ - int udp_pkt_stored = 0; - - if(!chdlc_priv_area->udp_pkt_lgth && - (skb->len <= MAX_LGTH_UDP_MGNT_PKT)) { - chdlc_priv_area->udp_pkt_lgth = skb->len; - chdlc_priv_area->udp_pkt_src = udp_pkt_src; - memcpy(chdlc_priv_area->udp_pkt_data, skb->data, skb->len); - chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UDP; - udp_pkt_stored = 1; - } - - if(udp_pkt_src == UDP_PKT_FRM_STACK){ - dev_kfree_skb_any(skb); - }else{ - dev_kfree_skb_any(skb); - } - - return(udp_pkt_stored); -} - - -/*============================================================================= - * Process UDP management packet. - */ - -static int process_udp_mgmt_pkt(sdla_t* card, struct net_device* dev, - chdlc_private_area_t* chdlc_priv_area ) -{ - unsigned char *buf; - unsigned int frames, len; - struct sk_buff *new_skb; - unsigned short buffer_length, real_len; - unsigned long data_ptr; - unsigned data_length; - int udp_mgmt_req_valid = 1; - CHDLC_MAILBOX_STRUCT *mb = card->mbox; - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - chdlc_udp_pkt_t *chdlc_udp_pkt; - struct timeval tv; - int err; - char ut_char; - - chdlc_udp_pkt = (chdlc_udp_pkt_t *) chdlc_priv_area->udp_pkt_data; - - if(chdlc_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK){ - - /* Only these commands are support for remote debugging. - * All others are not */ - switch(chdlc_udp_pkt->cblock.command) { - - case READ_GLOBAL_STATISTICS: - case READ_MODEM_STATUS: - case READ_CHDLC_LINK_STATUS: - case CPIPE_ROUTER_UP_TIME: - case READ_COMMS_ERROR_STATS: - case READ_CHDLC_OPERATIONAL_STATS: - - /* These two commands are executed for - * each request */ - case READ_CHDLC_CONFIGURATION: - case READ_CHDLC_CODE_VERSION: - udp_mgmt_req_valid = 1; - break; - default: - udp_mgmt_req_valid = 0; - break; - } - } - - if(!udp_mgmt_req_valid) { - - /* set length to 0 */ - chdlc_udp_pkt->cblock.buffer_length = 0; - - /* set return code */ - chdlc_udp_pkt->cblock.return_code = 0xCD; - - if (net_ratelimit()){ - printk(KERN_INFO - "%s: Warning, Illegal UDP command attempted from network: %x\n", - card->devname,chdlc_udp_pkt->cblock.command); - } - - } else { - unsigned long trace_status_cfg_addr = 0; - TRACE_STATUS_EL_CFG_STRUCT trace_cfg_struct; - TRACE_STATUS_ELEMENT_STRUCT trace_element_struct; - - switch(chdlc_udp_pkt->cblock.command) { - - case CPIPE_ENABLE_TRACING: - if (!chdlc_priv_area->TracingEnabled) { - - /* OPERATE_DATALINE_MONITOR */ - - mb->buffer_length = sizeof(LINE_TRACE_CONFIG_STRUCT); - mb->command = SET_TRACE_CONFIGURATION; - - ((LINE_TRACE_CONFIG_STRUCT *)mb->data)-> - trace_config = TRACE_ACTIVE; - /* Trace delay mode is not used because it slows - down transfer and results in a standoff situation - when there is a lot of data */ - - /* Configure the Trace based on user inputs */ - ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->trace_config |= - chdlc_udp_pkt->data[0]; - - ((LINE_TRACE_CONFIG_STRUCT *)mb->data)-> - trace_deactivation_timer = 4000; - - - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) { - chdlc_error(card,err,mb); - card->TracingEnabled = 0; - chdlc_udp_pkt->cblock.return_code = err; - mb->buffer_length = 0; - break; - } - - /* Get the base address of the trace element list */ - mb->buffer_length = 0; - mb->command = READ_TRACE_CONFIGURATION; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - - if (err != COMMAND_OK) { - chdlc_error(card,err,mb); - chdlc_priv_area->TracingEnabled = 0; - chdlc_udp_pkt->cblock.return_code = err; - mb->buffer_length = 0; - break; - } - - trace_status_cfg_addr =((LINE_TRACE_CONFIG_STRUCT *) - mb->data) -> ptr_trace_stat_el_cfg_struct; - - sdla_peek(&card->hw, trace_status_cfg_addr, - &trace_cfg_struct, sizeof(trace_cfg_struct)); - - chdlc_priv_area->start_trace_addr = trace_cfg_struct. - base_addr_trace_status_elements; - - chdlc_priv_area->number_trace_elements = - trace_cfg_struct.number_trace_status_elements; - - chdlc_priv_area->end_trace_addr = (unsigned long) - ((TRACE_STATUS_ELEMENT_STRUCT *) - chdlc_priv_area->start_trace_addr + - (chdlc_priv_area->number_trace_elements - 1)); - - chdlc_priv_area->base_addr_trace_buffer = - trace_cfg_struct.base_addr_trace_buffer; - - chdlc_priv_area->end_addr_trace_buffer = - trace_cfg_struct.end_addr_trace_buffer; - - chdlc_priv_area->curr_trace_addr = - trace_cfg_struct.next_trace_element_to_use; - - chdlc_priv_area->available_buffer_space = 2000 - - sizeof(ip_pkt_t) - - sizeof(udp_pkt_t) - - sizeof(wp_mgmt_t) - - sizeof(cblock_t) - - sizeof(trace_info_t); - } - chdlc_udp_pkt->cblock.return_code = COMMAND_OK; - mb->buffer_length = 0; - chdlc_priv_area->TracingEnabled = 1; - break; - - - case CPIPE_DISABLE_TRACING: - if (chdlc_priv_area->TracingEnabled) { - - /* OPERATE_DATALINE_MONITOR */ - mb->buffer_length = sizeof(LINE_TRACE_CONFIG_STRUCT); - mb->command = SET_TRACE_CONFIGURATION; - ((LINE_TRACE_CONFIG_STRUCT *)mb->data)-> - trace_config = TRACE_INACTIVE; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - } - - chdlc_priv_area->TracingEnabled = 0; - chdlc_udp_pkt->cblock.return_code = COMMAND_OK; - mb->buffer_length = 0; - break; - - - case CPIPE_GET_TRACE_INFO: - - if (!chdlc_priv_area->TracingEnabled) { - chdlc_udp_pkt->cblock.return_code = 1; - mb->buffer_length = 0; - break; - } - - chdlc_udp_pkt->trace_info.ismoredata = 0x00; - buffer_length = 0; /* offset of packet already occupied */ - - for (frames=0; frames < chdlc_priv_area->number_trace_elements; frames++){ - - trace_pkt_t *trace_pkt = (trace_pkt_t *) - &chdlc_udp_pkt->data[buffer_length]; - - sdla_peek(&card->hw, chdlc_priv_area->curr_trace_addr, - (unsigned char *)&trace_element_struct, - sizeof(TRACE_STATUS_ELEMENT_STRUCT)); - - if (trace_element_struct.opp_flag == 0x00) { - break; - } - - /* get pointer to real data */ - data_ptr = trace_element_struct.ptr_data_bfr; - - /* See if there is actual data on the trace buffer */ - if (data_ptr){ - data_length = trace_element_struct.trace_length; - }else{ - data_length = 0; - chdlc_udp_pkt->trace_info.ismoredata = 0x01; - } - - if( (chdlc_priv_area->available_buffer_space - buffer_length) - < ( sizeof(trace_pkt_t) + data_length) ) { - - /* indicate there are more frames on board & exit */ - chdlc_udp_pkt->trace_info.ismoredata = 0x01; - break; - } - - trace_pkt->status = trace_element_struct.trace_type; - - trace_pkt->time_stamp = - trace_element_struct.trace_time_stamp; - - trace_pkt->real_length = - trace_element_struct.trace_length; - - /* see if we can fit the frame into the user buffer */ - real_len = trace_pkt->real_length; - - if (data_ptr == 0) { - trace_pkt->data_avail = 0x00; - } else { - unsigned tmp = 0; - - /* get the data from circular buffer - must check for end of buffer */ - trace_pkt->data_avail = 0x01; - - if ((data_ptr + real_len) > - chdlc_priv_area->end_addr_trace_buffer + 1){ - - tmp = chdlc_priv_area->end_addr_trace_buffer - data_ptr + 1; - sdla_peek(&card->hw, data_ptr, - trace_pkt->data,tmp); - data_ptr = chdlc_priv_area->base_addr_trace_buffer; - } - - sdla_peek(&card->hw, data_ptr, - &trace_pkt->data[tmp], real_len - tmp); - } - - /* zero the opp flag to show we got the frame */ - ut_char = 0x00; - sdla_poke(&card->hw, chdlc_priv_area->curr_trace_addr, &ut_char, 1); - - /* now move onto the next frame */ - chdlc_priv_area->curr_trace_addr += sizeof(TRACE_STATUS_ELEMENT_STRUCT); - - /* check if we went over the last address */ - if ( chdlc_priv_area->curr_trace_addr > chdlc_priv_area->end_trace_addr ) { - chdlc_priv_area->curr_trace_addr = chdlc_priv_area->start_trace_addr; - } - - if(trace_pkt->data_avail == 0x01) { - buffer_length += real_len - 1; - } - - /* for the header */ - buffer_length += sizeof(trace_pkt_t); - - } /* For Loop */ - - if (frames == chdlc_priv_area->number_trace_elements){ - chdlc_udp_pkt->trace_info.ismoredata = 0x01; - } - chdlc_udp_pkt->trace_info.num_frames = frames; - - mb->buffer_length = buffer_length; - chdlc_udp_pkt->cblock.buffer_length = buffer_length; - - chdlc_udp_pkt->cblock.return_code = COMMAND_OK; - - break; - - - case CPIPE_FT1_READ_STATUS: - ((unsigned char *)chdlc_udp_pkt->data )[0] = - flags->FT1_info_struct.parallel_port_A_input; - - ((unsigned char *)chdlc_udp_pkt->data )[1] = - flags->FT1_info_struct.parallel_port_B_input; - - chdlc_udp_pkt->cblock.return_code = COMMAND_OK; - chdlc_udp_pkt->cblock.buffer_length = 2; - mb->buffer_length = 2; - break; - - case CPIPE_ROUTER_UP_TIME: - do_gettimeofday( &tv ); - chdlc_priv_area->router_up_time = tv.tv_sec - - chdlc_priv_area->router_start_time; - *(unsigned long *)&chdlc_udp_pkt->data = - chdlc_priv_area->router_up_time; - mb->buffer_length = sizeof(unsigned long); - chdlc_udp_pkt->cblock.buffer_length = sizeof(unsigned long); - chdlc_udp_pkt->cblock.return_code = COMMAND_OK; - break; - - case FT1_MONITOR_STATUS_CTRL: - /* Enable FT1 MONITOR STATUS */ - if ((chdlc_udp_pkt->data[0] & ENABLE_READ_FT1_STATUS) || - (chdlc_udp_pkt->data[0] & ENABLE_READ_FT1_OP_STATS)) { - - if( rCount++ != 0 ) { - chdlc_udp_pkt->cblock. - return_code = COMMAND_OK; - mb->buffer_length = 1; - break; - } - } - - /* Disable FT1 MONITOR STATUS */ - if( chdlc_udp_pkt->data[0] == 0) { - - if( --rCount != 0) { - chdlc_udp_pkt->cblock. - return_code = COMMAND_OK; - mb->buffer_length = 1; - break; - } - } - goto dflt_1; - - default: -dflt_1: - /* it's a board command */ - mb->command = chdlc_udp_pkt->cblock.command; - mb->buffer_length = chdlc_udp_pkt->cblock.buffer_length; - if (mb->buffer_length) { - memcpy(&mb->data, (unsigned char *) chdlc_udp_pkt-> - data, mb->buffer_length); - } - /* run the command on the board */ - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) { - break; - } - - /* copy the result back to our buffer */ - memcpy(&chdlc_udp_pkt->cblock, mb, sizeof(cblock_t)); - - if (mb->buffer_length) { - memcpy(&chdlc_udp_pkt->data, &mb->data, - mb->buffer_length); - } - - } /* end of switch */ - } /* end of else */ - - /* Fill UDP TTL */ - chdlc_udp_pkt->ip_pkt.ttl = card->wandev.ttl; - - len = reply_udp(chdlc_priv_area->udp_pkt_data, mb->buffer_length); - - - if(chdlc_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK){ - - /* Must check if we interrupted if_send() routine. The - * tx buffers might be used. If so drop the packet */ - if (!test_bit(SEND_CRIT,&card->wandev.critical)) { - - if(!chdlc_send(card, chdlc_priv_area->udp_pkt_data, len)) { - ++ card->wandev.stats.tx_packets; - card->wandev.stats.tx_bytes += len; - } - } - } else { - - /* Pass it up the stack - Allocate socket buffer */ - if ((new_skb = dev_alloc_skb(len)) != NULL) { - /* copy data into new_skb */ - - buf = skb_put(new_skb, len); - memcpy(buf, chdlc_priv_area->udp_pkt_data, len); - - /* Decapsulate pkt and pass it up the protocol stack */ - new_skb->protocol = htons(ETH_P_IP); - new_skb->dev = dev; - new_skb->mac.raw = new_skb->data; - - netif_rx(new_skb); - dev->last_rx = jiffies; - } else { - - printk(KERN_INFO "%s: no socket buffers available!\n", - card->devname); - } - } - - chdlc_priv_area->udp_pkt_lgth = 0; - - return 0; -} - -/*============================================================================ - * Initialize Receive and Transmit Buffers. - */ - -static void init_chdlc_tx_rx_buff( sdla_t* card) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - CHDLC_TX_STATUS_EL_CFG_STRUCT *tx_config; - CHDLC_RX_STATUS_EL_CFG_STRUCT *rx_config; - char err; - - mb->buffer_length = 0; - mb->command = READ_CHDLC_CONFIGURATION; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - - if(err != COMMAND_OK) { - if (card->wandev.dev){ - chdlc_error(card,err,mb); - } - return; - } - - if(card->hw.type == SDLA_S514) { - tx_config = (CHDLC_TX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase + - (((CHDLC_CONFIGURATION_STRUCT *)mb->data)-> - ptr_CHDLC_Tx_stat_el_cfg_struct)); - rx_config = (CHDLC_RX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase + - (((CHDLC_CONFIGURATION_STRUCT *)mb->data)-> - ptr_CHDLC_Rx_stat_el_cfg_struct)); - - /* Setup Head and Tails for buffers */ - card->u.c.txbuf_base = (void *)(card->hw.dpmbase + - tx_config->base_addr_Tx_status_elements); - card->u.c.txbuf_last = - (CHDLC_DATA_TX_STATUS_EL_STRUCT *) - card->u.c.txbuf_base + - (tx_config->number_Tx_status_elements - 1); - - card->u.c.rxbuf_base = (void *)(card->hw.dpmbase + - rx_config->base_addr_Rx_status_elements); - card->u.c.rxbuf_last = - (CHDLC_DATA_RX_STATUS_EL_STRUCT *) - card->u.c.rxbuf_base + - (rx_config->number_Rx_status_elements - 1); - - /* Set up next pointer to be used */ - card->u.c.txbuf = (void *)(card->hw.dpmbase + - tx_config->next_Tx_status_element_to_use); - card->u.c.rxmb = (void *)(card->hw.dpmbase + - rx_config->next_Rx_status_element_to_use); - } - else { - tx_config = (CHDLC_TX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase + - (((CHDLC_CONFIGURATION_STRUCT *)mb->data)-> - ptr_CHDLC_Tx_stat_el_cfg_struct % SDLA_WINDOWSIZE)); - - rx_config = (CHDLC_RX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase + - (((CHDLC_CONFIGURATION_STRUCT *)mb->data)-> - ptr_CHDLC_Rx_stat_el_cfg_struct % SDLA_WINDOWSIZE)); - - /* Setup Head and Tails for buffers */ - card->u.c.txbuf_base = (void *)(card->hw.dpmbase + - (tx_config->base_addr_Tx_status_elements % SDLA_WINDOWSIZE)); - card->u.c.txbuf_last = - (CHDLC_DATA_TX_STATUS_EL_STRUCT *)card->u.c.txbuf_base - + (tx_config->number_Tx_status_elements - 1); - card->u.c.rxbuf_base = (void *)(card->hw.dpmbase + - (rx_config->base_addr_Rx_status_elements % SDLA_WINDOWSIZE)); - card->u.c.rxbuf_last = - (CHDLC_DATA_RX_STATUS_EL_STRUCT *)card->u.c.rxbuf_base - + (rx_config->number_Rx_status_elements - 1); - - /* Set up next pointer to be used */ - card->u.c.txbuf = (void *)(card->hw.dpmbase + - (tx_config->next_Tx_status_element_to_use % SDLA_WINDOWSIZE)); - card->u.c.rxmb = (void *)(card->hw.dpmbase + - (rx_config->next_Rx_status_element_to_use % SDLA_WINDOWSIZE)); - } - - /* Setup Actual Buffer Start and end addresses */ - card->u.c.rx_base = rx_config->base_addr_Rx_buffer; - card->u.c.rx_top = rx_config->end_addr_Rx_buffer; - -} - -/*============================================================================= - * Perform Interrupt Test by running READ_CHDLC_CODE_VERSION command MAX_INTR - * _TEST_COUNTER times. - */ -static int intr_test( sdla_t* card) -{ - CHDLC_MAILBOX_STRUCT* mb = card->mbox; - int err,i; - - Intr_test_counter = 0; - - err = chdlc_set_intr_mode(card, APP_INT_ON_COMMAND_COMPLETE); - - if (err == CMD_OK) { - for (i = 0; i < MAX_INTR_TEST_COUNTER; i ++) { - mb->buffer_length = 0; - mb->command = READ_CHDLC_CODE_VERSION; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != CMD_OK) - chdlc_error(card, err, mb); - } - } - else { - return err; - } - - err = chdlc_set_intr_mode(card, 0); - - if (err != CMD_OK) - return err; - - return 0; -} - -/*============================================================================== - * Determine what type of UDP call it is. CPIPEAB ? - */ -static int udp_pkt_type(struct sk_buff *skb, sdla_t* card) -{ - chdlc_udp_pkt_t *chdlc_udp_pkt = (chdlc_udp_pkt_t *)skb->data; - -#ifdef _WAN_UDP_DEBUG - printk(KERN_INFO "SIG %s = %s\n\ - UPP %x = %x\n\ - PRT %x = %x\n\ - REQ %i = %i\n\ - 36 th = %x 37th = %x\n", - chdlc_udp_pkt->wp_mgmt.signature, - UDPMGMT_SIGNATURE, - chdlc_udp_pkt->udp_pkt.udp_dst_port, - ntohs(card->wandev.udp_port), - chdlc_udp_pkt->ip_pkt.protocol, - UDPMGMT_UDP_PROTOCOL, - chdlc_udp_pkt->wp_mgmt.request_reply, - UDPMGMT_REQUEST, - skb->data[36], skb->data[37]); -#endif - - if (!strncmp(chdlc_udp_pkt->wp_mgmt.signature,UDPMGMT_SIGNATURE,8) && - (chdlc_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) && - (chdlc_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) && - (chdlc_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) { - - return UDP_CPIPE_TYPE; - - }else{ - return UDP_INVALID_TYPE; - } -} - -/*============================================================================ - * Set PORT state. - */ -static void port_set_state (sdla_t *card, int state) -{ - if (card->u.c.state != state) - { - switch (state) - { - case WAN_CONNECTED: - printk (KERN_INFO "%s: Link connected!\n", - card->devname); - break; - - case WAN_CONNECTING: - printk (KERN_INFO "%s: Link connecting...\n", - card->devname); - break; - - case WAN_DISCONNECTED: - printk (KERN_INFO "%s: Link disconnected!\n", - card->devname); - break; - } - - card->wandev.state = card->u.c.state = state; - if (card->wandev.dev){ - struct net_device *dev = card->wandev.dev; - chdlc_private_area_t *chdlc_priv_area = dev->priv; - chdlc_priv_area->common.state = state; - } - } -} - -/*=========================================================================== - * config_chdlc - * - * Configure the chdlc protocol and enable communications. - * - * The if_open() function binds this function to the poll routine. - * Therefore, this function will run every time the chdlc interface - * is brought up. We cannot run this function from the if_open - * because if_open does not have access to the remote IP address. - * - * If the communications are not enabled, proceed to configure - * the card and enable communications. - * - * If the communications are enabled, it means that the interface - * was shutdown by ether the user or driver. In this case, we - * have to check that the IP addresses have not changed. If - * the IP addresses have changed, we have to reconfigure the firmware - * and update the changed IP addresses. Otherwise, just exit. - * - */ - -static int config_chdlc (sdla_t *card) -{ - struct net_device *dev = card->wandev.dev; - chdlc_private_area_t *chdlc_priv_area = dev->priv; - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - - if (card->u.c.comm_enabled){ - - /* Jun 20. 2000: NC - * IP addresses are not used in the API mode */ - - if ((chdlc_priv_area->ip_local_tmp != chdlc_priv_area->ip_local || - chdlc_priv_area->ip_remote_tmp != chdlc_priv_area->ip_remote) && - card->u.c.usedby == WANPIPE) { - - /* The IP addersses have changed, we must - * stop the communications and reconfigure - * the card. Reason: the firmware must know - * the local and remote IP addresses. */ - disable_comm(card); - port_set_state(card, WAN_DISCONNECTED); - printk(KERN_INFO - "%s: IP addresses changed!\n", - card->devname); - printk(KERN_INFO - "%s: Restarting communications ...\n", - card->devname); - }else{ - /* IP addresses are the same and the link is up, - * we don't have to do anything here. Therefore, exit */ - return 0; - } - } - - chdlc_priv_area->ip_local = chdlc_priv_area->ip_local_tmp; - chdlc_priv_area->ip_remote = chdlc_priv_area->ip_remote_tmp; - - - /* Setup the Board for asynchronous mode */ - if (card->u.c.async_mode){ - - if (set_asy_config(card)) { - printk (KERN_INFO "%s: Failed CHDLC Async configuration!\n", - card->devname); - return 0; - } - }else{ - /* Setup the Board for CHDLC */ - if (set_chdlc_config(card)) { - printk (KERN_INFO "%s: Failed CHDLC configuration!\n", - card->devname); - return 0; - } - } - - /* Set interrupt mode and mask */ - if (chdlc_set_intr_mode(card, APP_INT_ON_RX_FRAME | - APP_INT_ON_GLOBAL_EXCEP_COND | - APP_INT_ON_TX_FRAME | - APP_INT_ON_CHDLC_EXCEP_COND | APP_INT_ON_TIMER)){ - printk (KERN_INFO "%s: Failed to set interrupt triggers!\n", - card->devname); - return 0; - } - - - /* Mask the Transmit and Timer interrupt */ - flags->interrupt_info_struct.interrupt_permission &= - ~(APP_INT_ON_TX_FRAME | APP_INT_ON_TIMER); - - /* In TTY mode, receive interrupt will be enabled during - * wanpipe_tty_open() operation */ - if (card->tty_opt){ - flags->interrupt_info_struct.interrupt_permission &= ~APP_INT_ON_RX_FRAME; - } - - /* Enable communications */ - if (card->u.c.async_mode){ - if (asy_comm_enable(card) != 0) { - printk(KERN_INFO "%s: Failed to enable async commnunication!\n", - card->devname); - flags->interrupt_info_struct.interrupt_permission = 0; - card->u.c.comm_enabled=0; - chdlc_set_intr_mode(card,0); - return 0; - } - }else{ - if (chdlc_comm_enable(card) != 0) { - printk(KERN_INFO "%s: Failed to enable chdlc communications!\n", - card->devname); - flags->interrupt_info_struct.interrupt_permission = 0; - card->u.c.comm_enabled=0; - chdlc_set_intr_mode(card,0); - return 0; - } - } - - /* Initialize Rx/Tx buffer control fields */ - init_chdlc_tx_rx_buff(card); - port_set_state(card, WAN_CONNECTING); - return 0; -} - - -/*============================================================ - * chdlc_poll - * - * Rationale: - * We cannot manipulate the routing tables, or - * ip addresses withing the interrupt. Therefore - * we must perform such actons outside an interrupt - * at a later time. - * - * Description: - * CHDLC polling routine, responsible for - * shutting down interfaces upon disconnect - * and adding/removing routes. - * - * Usage: - * This function is executed for each CHDLC - * interface through a tq_schedule bottom half. - * - * trigger_chdlc_poll() function is used to kick - * the chldc_poll routine. - */ - -static void chdlc_poll(struct net_device *dev) -{ - chdlc_private_area_t *chdlc_priv_area; - sdla_t *card; - u8 check_gateway=0; - SHARED_MEMORY_INFO_STRUCT* flags; - - - if (!dev || (chdlc_priv_area=dev->priv) == NULL) - return; - - card = chdlc_priv_area->card; - flags = card->u.c.flags; - - /* (Re)Configuraiton is in progress, stop what you are - * doing and get out */ - if (test_bit(PERI_CRIT,&card->wandev.critical)){ - clear_bit(POLL_CRIT,&card->wandev.critical); - return; - } - - /* if_open() function has triggered the polling routine - * to determine the configured IP addresses. Once the - * addresses are found, trigger the chdlc configuration */ - if (test_bit(0,&chdlc_priv_area->config_chdlc)){ - - chdlc_priv_area->ip_local_tmp = get_ip_address(dev,WAN_LOCAL_IP); - chdlc_priv_area->ip_remote_tmp = get_ip_address(dev,WAN_POINTOPOINT_IP); - - /* Jun 20. 2000 Bug Fix - * Only perform this check in WANPIPE mode, since - * IP addresses are not used in the API mode. */ - - if (chdlc_priv_area->ip_local_tmp == chdlc_priv_area->ip_remote_tmp && - card->u.c.slarp_timer == 0x00 && - !card->u.c.backup && - card->u.c.usedby == WANPIPE){ - - if (++chdlc_priv_area->ip_error > MAX_IP_ERRORS){ - printk(KERN_INFO "\n%s: --- WARNING ---\n", - card->devname); - printk(KERN_INFO - "%s: The local IP address is the same as the\n", - card->devname); - printk(KERN_INFO - "%s: Point-to-Point IP address.\n", - card->devname); - printk(KERN_INFO "%s: --- WARNING ---\n\n", - card->devname); - }else{ - clear_bit(POLL_CRIT,&card->wandev.critical); - chdlc_priv_area->poll_delay_timer.expires = jiffies+HZ; - add_timer(&chdlc_priv_area->poll_delay_timer); - return; - } - } - - clear_bit(0,&chdlc_priv_area->config_chdlc); - clear_bit(POLL_CRIT,&card->wandev.critical); - - chdlc_priv_area->timer_int_enabled |= TMR_INT_ENABLED_CONFIG; - flags->interrupt_info_struct.interrupt_permission |= APP_INT_ON_TIMER; - return; - } - /* Dynamic interface implementation, as well as dynamic - * routing. */ - - switch (card->u.c.state){ - - case WAN_DISCONNECTED: - - /* If the dynamic interface configuration is on, and interface - * is up, then bring down the netowrk interface */ - - if (test_bit(DYN_OPT_ON,&chdlc_priv_area->interface_down) && - !test_bit(DEV_DOWN, &chdlc_priv_area->interface_down) && - card->wandev.dev->flags & IFF_UP){ - - printk(KERN_INFO "%s: Interface %s down.\n", - card->devname,card->wandev.dev->name); - change_dev_flags(card->wandev.dev,(card->wandev.dev->flags&~IFF_UP)); - set_bit(DEV_DOWN,&chdlc_priv_area->interface_down); - chdlc_priv_area->route_status = NO_ROUTE; - - }else{ - /* We need to check if the local IP address is - * zero. If it is, we shouldn't try to remove it. - */ - - if (card->wandev.dev->flags & IFF_UP && - get_ip_address(card->wandev.dev,WAN_LOCAL_IP) && - chdlc_priv_area->route_status != NO_ROUTE && - card->u.c.slarp_timer){ - - process_route(card); - } - } - break; - - case WAN_CONNECTED: - - /* In SMP machine this code can execute before the interface - * comes up. In this case, we must make sure that we do not - * try to bring up the interface before dev_open() is finished */ - - - /* DEV_DOWN will be set only when we bring down the interface - * for the very first time. This way we know that it was us - * that brought the interface down */ - - if (test_bit(DYN_OPT_ON,&chdlc_priv_area->interface_down) && - test_bit(DEV_DOWN, &chdlc_priv_area->interface_down) && - !(card->wandev.dev->flags & IFF_UP)){ - - printk(KERN_INFO "%s: Interface %s up.\n", - card->devname,card->wandev.dev->name); - change_dev_flags(card->wandev.dev,(card->wandev.dev->flags|IFF_UP)); - clear_bit(DEV_DOWN,&chdlc_priv_area->interface_down); - check_gateway=1; - } - - if (chdlc_priv_area->route_status == ADD_ROUTE && - card->u.c.slarp_timer){ - - process_route(card); - check_gateway=1; - } - - if (chdlc_priv_area->gateway && check_gateway) - add_gateway(card,dev); - - break; - } - - clear_bit(POLL_CRIT,&card->wandev.critical); -} - -/*============================================================ - * trigger_chdlc_poll - * - * Description: - * Add a chdlc_poll() work entry into the keventd work queue - * for a specific dlci/interface. This will kick - * the fr_poll() routine at a later time. - * - * Usage: - * Interrupts use this to defer a taks to - * a polling routine. - * - */ -static void trigger_chdlc_poll(struct net_device *dev) -{ - chdlc_private_area_t *chdlc_priv_area; - sdla_t *card; - - if (!dev) - return; - - if ((chdlc_priv_area = dev->priv)==NULL) - return; - - card = chdlc_priv_area->card; - - if (test_and_set_bit(POLL_CRIT,&card->wandev.critical)){ - return; - } - if (test_bit(PERI_CRIT,&card->wandev.critical)){ - return; - } - schedule_work(&chdlc_priv_area->poll_work); -} - - -static void chdlc_poll_delay (unsigned long dev_ptr) -{ - struct net_device *dev = (struct net_device *)dev_ptr; - trigger_chdlc_poll(dev); -} - - -void s508_lock (sdla_t *card, unsigned long *smp_flags) -{ - spin_lock_irqsave(&card->wandev.lock, *smp_flags); - if (card->next){ - spin_lock(&card->next->wandev.lock); - } -} - -void s508_unlock (sdla_t *card, unsigned long *smp_flags) -{ - if (card->next){ - spin_unlock(&card->next->wandev.lock); - } - spin_unlock_irqrestore(&card->wandev.lock, *smp_flags); -} - -//*********** TTY SECTION **************** - -static void wanpipe_tty_trigger_tx_irq(sdla_t *card) -{ - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - INTERRUPT_INFORMATION_STRUCT *chdlc_int = &flags->interrupt_info_struct; - chdlc_int->interrupt_permission |= APP_INT_ON_TX_FRAME; -} - -static void wanpipe_tty_trigger_poll(sdla_t *card) -{ - schedule_work(&card->tty_work); -} - -static void tty_poll_work (void* data) -{ - sdla_t *card = (sdla_t*)data; - struct tty_struct *tty; - - if ((tty=card->tty)==NULL) - return; - - tty_wakeup(tty); -#if defined(SERIAL_HAVE_POLL_WAIT) - wake_up_interruptible(&tty->poll_wait); -#endif - return; -} - -static void wanpipe_tty_close(struct tty_struct *tty, struct file * filp) -{ - sdla_t *card; - unsigned long smp_flags; - - if (!tty || !tty->driver_data){ - return; - } - - card = (sdla_t*)tty->driver_data; - - if (!card) - return; - - printk(KERN_INFO "%s: Closing TTY Driver!\n", - card->devname); - - /* Sanity Check */ - if (!card->tty_open) - return; - - wanpipe_close(card); - if (--card->tty_open == 0){ - - lock_adapter_irq(&card->wandev.lock,&smp_flags); - card->tty=NULL; - chdlc_disable_comm_shutdown(card); - unlock_adapter_irq(&card->wandev.lock,&smp_flags); - - kfree(card->tty_buf); - card->tty_buf = NULL; - kfree(card->tty_rx); - card->tty_rx = NULL; - } - return; -} -static int wanpipe_tty_open(struct tty_struct *tty, struct file * filp) -{ - unsigned long smp_flags; - sdla_t *card; - - if (!tty){ - return -ENODEV; - } - - if (!tty->driver_data){ - int port; - port = tty->index; - if ((port < 0) || (port >= NR_PORTS)) - return -ENODEV; - - tty->driver_data = WAN_CARD(port); - if (!tty->driver_data) - return -ENODEV; - } - - card = (sdla_t*)tty->driver_data; - - if (!card){ - lock_adapter_irq(&card->wandev.lock,&smp_flags); - card->tty=NULL; - unlock_adapter_irq(&card->wandev.lock,&smp_flags); - return -ENODEV; - } - - printk(KERN_INFO "%s: Opening TTY Driver!\n", - card->devname); - - if (card->tty_open == 0){ - lock_adapter_irq(&card->wandev.lock,&smp_flags); - card->tty=tty; - unlock_adapter_irq(&card->wandev.lock,&smp_flags); - - if (!card->tty_buf){ - card->tty_buf = kmalloc(TTY_CHDLC_MAX_MTU, GFP_KERNEL); - if (!card->tty_buf){ - card->tty_buf=NULL; - card->tty=NULL; - return -ENOMEM; - } - } - - if (!card->tty_rx){ - card->tty_rx = kmalloc(TTY_CHDLC_MAX_MTU, GFP_KERNEL); - if (!card->tty_rx){ - /* Free the buffer above */ - kfree(card->tty_buf); - card->tty_buf=NULL; - card->tty=NULL; - return -ENOMEM; - } - } - } - - ++card->tty_open; - wanpipe_open(card); - return 0; -} - -static int wanpipe_tty_write(struct tty_struct * tty, const unsigned char *buf, int count) -{ - unsigned long smp_flags=0; - sdla_t *card=NULL; - - if (!tty){ - dbg_printk(KERN_INFO "NO TTY in Write\n"); - return -ENODEV; - } - - card = (sdla_t *)tty->driver_data; - - if (!card){ - dbg_printk(KERN_INFO "No Card in TTY Write\n"); - return -ENODEV; - } - - if (count > card->wandev.mtu){ - dbg_printk(KERN_INFO "Frame too big in Write %i Max: %i\n", - count,card->wandev.mtu); - return -EINVAL; - } - - if (card->wandev.state != WAN_CONNECTED){ - dbg_printk(KERN_INFO "Card not connected in TTY Write\n"); - return -EINVAL; - } - - /* Lock the 508 Card: SMP is supported */ - if(card->hw.type != SDLA_S514){ - s508_lock(card,&smp_flags); - } - - if (test_and_set_bit(SEND_CRIT,(void*)&card->wandev.critical)){ - printk(KERN_INFO "%s: Critical in TTY Write\n", - card->devname); - - /* Lock the 508 Card: SMP is supported */ - if(card->hw.type != SDLA_S514) - s508_unlock(card,&smp_flags); - - return -EINVAL; - } - - if (chdlc_send(card,(void*)buf,count)){ - dbg_printk(KERN_INFO "%s: Failed to send, retry later: kernel!\n", - card->devname); - clear_bit(SEND_CRIT,(void*)&card->wandev.critical); - - wanpipe_tty_trigger_tx_irq(card); - - if(card->hw.type != SDLA_S514) - s508_unlock(card,&smp_flags); - return 0; - } - dbg_printk(KERN_INFO "%s: Packet sent OK: %i\n",card->devname,count); - clear_bit(SEND_CRIT,(void*)&card->wandev.critical); - - if(card->hw.type != SDLA_S514) - s508_unlock(card,&smp_flags); - - return count; -} - -static void wanpipe_tty_receive(sdla_t *card, unsigned addr, unsigned int len) -{ - unsigned offset=0; - unsigned olen=len; - char fp=0; - struct tty_struct *tty; - int i; - struct tty_ldisc *ld; - - if (!card->tty_open){ - dbg_printk(KERN_INFO "%s: TTY not open during receive\n", - card->devname); - return; - } - - if ((tty=card->tty) == NULL){ - dbg_printk(KERN_INFO "%s: No TTY on receive\n", - card->devname); - return; - } - - if (!tty->driver_data){ - dbg_printk(KERN_INFO "%s: No Driver Data, or Flip on receive\n", - card->devname); - return; - } - - - if (card->u.c.async_mode){ - if ((tty->flip.count+len) >= TTY_FLIPBUF_SIZE){ - if (net_ratelimit()){ - printk(KERN_INFO - "%s: Received packet size too big: %i bytes, Max: %i!\n", - card->devname,len,TTY_FLIPBUF_SIZE); - } - return; - } - - - if((addr + len) > card->u.c.rx_top + 1) { - offset = card->u.c.rx_top - addr + 1; - - sdla_peek(&card->hw, addr, tty->flip.char_buf_ptr, offset); - - addr = card->u.c.rx_base; - len -= offset; - - tty->flip.char_buf_ptr+=offset; - tty->flip.count+=offset; - for (i=0;i<offset;i++){ - *tty->flip.flag_buf_ptr = 0; - tty->flip.flag_buf_ptr++; - } - } - - sdla_peek(&card->hw, addr, tty->flip.char_buf_ptr, len); - - tty->flip.char_buf_ptr+=len; - card->tty->flip.count+=len; - for (i=0;i<len;i++){ - *tty->flip.flag_buf_ptr = 0; - tty->flip.flag_buf_ptr++; - } - - tty->low_latency=1; - tty_flip_buffer_push(tty); - }else{ - if (!card->tty_rx){ - if (net_ratelimit()){ - printk(KERN_INFO - "%s: Receive sync buffer not available!\n", - card->devname); - } - return; - } - - if (len > TTY_CHDLC_MAX_MTU){ - if (net_ratelimit()){ - printk(KERN_INFO - "%s: Received packet size too big: %i bytes, Max: %i!\n", - card->devname,len,TTY_FLIPBUF_SIZE); - } - return; - } - - - if((addr + len) > card->u.c.rx_top + 1) { - offset = card->u.c.rx_top - addr + 1; - - sdla_peek(&card->hw, addr, card->tty_rx, offset); - - addr = card->u.c.rx_base; - len -= offset; - } - sdla_peek(&card->hw, addr, card->tty_rx+offset, len); - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->receive_buf) - ld->receive_buf(tty,card->tty_rx,&fp,olen); - tty_ldisc_deref(ld); - }else{ - if (net_ratelimit()){ - printk(KERN_INFO - "%s: NO TTY Sync line discipline!\n", - card->devname); - } - } - } - - dbg_printk(KERN_INFO "%s: Received Data %i\n",card->devname,olen); - return; -} - -#if 0 -static int wanpipe_tty_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} -#endif - -static void wanpipe_tty_stop(struct tty_struct *tty) -{ - return; -} - -static void wanpipe_tty_start(struct tty_struct *tty) -{ - return; -} - -static int config_tty (sdla_t *card) -{ - SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags; - - /* Setup the Board for asynchronous mode */ - if (card->u.c.async_mode){ - - if (set_asy_config(card)) { - printk (KERN_INFO "%s: Failed CHDLC Async configuration!\n", - card->devname); - return -EINVAL; - } - }else{ - /* Setup the Board for CHDLC */ - if (set_chdlc_config(card)) { - printk (KERN_INFO "%s: Failed CHDLC configuration!\n", - card->devname); - return -EINVAL; - } - } - - /* Set interrupt mode and mask */ - if (chdlc_set_intr_mode(card, APP_INT_ON_RX_FRAME | - APP_INT_ON_GLOBAL_EXCEP_COND | - APP_INT_ON_TX_FRAME | - APP_INT_ON_CHDLC_EXCEP_COND | APP_INT_ON_TIMER)){ - printk (KERN_INFO "%s: Failed to set interrupt triggers!\n", - card->devname); - return -EINVAL; - } - - - /* Mask the Transmit and Timer interrupt */ - flags->interrupt_info_struct.interrupt_permission &= - ~(APP_INT_ON_TX_FRAME | APP_INT_ON_TIMER); - - - /* Enable communications */ - if (card->u.c.async_mode){ - if (asy_comm_enable(card) != 0) { - printk(KERN_INFO "%s: Failed to enable async commnunication!\n", - card->devname); - flags->interrupt_info_struct.interrupt_permission = 0; - card->u.c.comm_enabled=0; - chdlc_set_intr_mode(card,0); - return -EINVAL; - } - }else{ - if (chdlc_comm_enable(card) != 0) { - printk(KERN_INFO "%s: Failed to enable chdlc communications!\n", - card->devname); - flags->interrupt_info_struct.interrupt_permission = 0; - card->u.c.comm_enabled=0; - chdlc_set_intr_mode(card,0); - return -EINVAL; - } - } - - /* Initialize Rx/Tx buffer control fields */ - init_chdlc_tx_rx_buff(card); - port_set_state(card, WAN_CONNECTING); - return 0; -} - - -static int change_speed(sdla_t *card, struct tty_struct *tty, - struct termios *old_termios) -{ - int baud, ret=0; - unsigned cflag; - int dbits,sbits,parity,handshaking; - - cflag = tty->termios->c_cflag; - - /* There is always one stop bit */ - sbits=WANOPT_ONE; - - /* Parity is defaulted to NONE */ - parity = WANOPT_NONE; - - handshaking=0; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: dbits = 5; break; - case CS6: dbits = 6; break; - case CS7: dbits = 7; break; - case CS8: dbits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: dbits = 8; break; - } - - /* One more stop bit should be supported, thus increment - * the number of stop bits Max=2 */ - if (cflag & CSTOPB) { - sbits = WANOPT_TWO; - } - if (cflag & PARENB) { - parity = WANOPT_EVEN; - } - if (cflag & PARODD){ - parity = WANOPT_ODD; - } - - /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(tty); - - if (!baud) - baud = 9600; /* B0 transition handled in rs_set_termios */ - - if (cflag & CRTSCTS) { - handshaking|=ASY_RTS_HS_FOR_RX; - } - - if (I_IGNPAR(tty)) - parity = WANOPT_NONE; - - if (I_IXOFF(tty)){ - handshaking|=ASY_XON_XOFF_HS_FOR_RX; - handshaking|=ASY_XON_XOFF_HS_FOR_TX; - } - - if (I_IXON(tty)){ - handshaking|=ASY_XON_XOFF_HS_FOR_RX; - handshaking|=ASY_XON_XOFF_HS_FOR_TX; - } - - if (card->u.c.async_mode){ - if (card->wandev.bps != baud) - ret=1; - card->wandev.bps = baud; - } - - if (card->u.c.async_mode){ - if (card->u.c.protocol_options != handshaking) - ret=1; - card->u.c.protocol_options = handshaking; - - if (card->u.c.tx_bits_per_char != dbits) - ret=1; - card->u.c.tx_bits_per_char = dbits; - - if (card->u.c.rx_bits_per_char != dbits) - ret=1; - card->u.c.rx_bits_per_char = dbits; - - if (card->u.c.stop_bits != sbits) - ret=1; - card->u.c.stop_bits = sbits; - - if (card->u.c.parity != parity) - ret=1; - card->u.c.parity = parity; - - card->u.c.break_timer = 50; - card->u.c.inter_char_timer = 10; - card->u.c.rx_complete_length = 100; - card->u.c.xon_char = 0xFE; - }else{ - card->u.c.protocol_options = HDLC_STREAMING_MODE; - } - - return ret; -} - - -static void wanpipe_tty_set_termios(struct tty_struct *tty, struct termios *old_termios) -{ - sdla_t *card; - int err=1; - - if (!tty){ - return; - } - - card = (sdla_t *)tty->driver_data; - - if (!card) - return; - - if (change_speed(card, tty, old_termios) || !card->u.c.comm_enabled){ - unsigned long smp_flags; - - if (card->u.c.comm_enabled){ - lock_adapter_irq(&card->wandev.lock,&smp_flags); - chdlc_disable_comm_shutdown(card); - unlock_adapter_irq(&card->wandev.lock,&smp_flags); - } - lock_adapter_irq(&card->wandev.lock,&smp_flags); - err = config_tty(card); - unlock_adapter_irq(&card->wandev.lock,&smp_flags); - if (card->u.c.async_mode){ - printk(KERN_INFO "%s: TTY Async Configuration:\n" - " Baud =%i\n" - " Handshaking =%s\n" - " Tx Dbits =%i\n" - " Rx Dbits =%i\n" - " Parity =%s\n" - " Stop Bits =%i\n", - card->devname, - card->wandev.bps, - opt_decode[card->u.c.protocol_options], - card->u.c.tx_bits_per_char, - card->u.c.rx_bits_per_char, - p_decode[card->u.c.parity] , - card->u.c.stop_bits); - }else{ - printk(KERN_INFO "%s: TTY Sync Configuration:\n" - " Baud =%i\n" - " Protocol =HDLC_STREAMING\n", - card->devname,card->wandev.bps); - } - if (!err){ - port_set_state(card,WAN_CONNECTED); - }else{ - port_set_state(card,WAN_DISCONNECTED); - } - } - return; -} - -static void wanpipe_tty_put_char(struct tty_struct *tty, unsigned char ch) -{ - sdla_t *card; - unsigned long smp_flags=0; - - if (!tty){ - return; - } - - card = (sdla_t *)tty->driver_data; - - if (!card) - return; - - if (card->wandev.state != WAN_CONNECTED) - return; - - if(card->hw.type != SDLA_S514) - s508_lock(card,&smp_flags); - - if (test_and_set_bit(SEND_CRIT,(void*)&card->wandev.critical)){ - - wanpipe_tty_trigger_tx_irq(card); - - if(card->hw.type != SDLA_S514) - s508_unlock(card,&smp_flags); - return; - } - - if (chdlc_send(card,(void*)&ch,1)){ - wanpipe_tty_trigger_tx_irq(card); - dbg_printk("%s: Failed to TX char!\n",card->devname); - } - - dbg_printk("%s: Char TX OK\n",card->devname); - - clear_bit(SEND_CRIT,(void*)&card->wandev.critical); - - if(card->hw.type != SDLA_S514) - s508_unlock(card,&smp_flags); - - return; -} - -static void wanpipe_tty_flush_chars(struct tty_struct *tty) -{ - return; -} - -static void wanpipe_tty_flush_buffer(struct tty_struct *tty) -{ - if (!tty) - return; - -#if defined(SERIAL_HAVE_POLL_WAIT) - wake_up_interruptible(&tty->poll_wait); -#endif - tty_wakeup(tty); - return; -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void wanpipe_tty_send_xchar(struct tty_struct *tty, char ch) -{ - return; -} - - -static int wanpipe_tty_chars_in_buffer(struct tty_struct *tty) -{ - return 0; -} - - -static int wanpipe_tty_write_room(struct tty_struct *tty) -{ - sdla_t *card; - - printk(KERN_INFO "TTY Write Room\n"); - - if (!tty){ - return 0; - } - - card = (sdla_t *)tty->driver_data; - if (!card) - return 0; - - if (card->wandev.state != WAN_CONNECTED) - return 0; - - return SEC_MAX_NO_DATA_BYTES_IN_FRAME; -} - - -static int set_modem_status(sdla_t *card, unsigned char data) -{ - CHDLC_MAILBOX_STRUCT *mb = card->mbox; - int err; - - mb->buffer_length=1; - mb->command=SET_MODEM_STATUS; - mb->data[0]=data; - err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; - if (err != COMMAND_OK) - chdlc_error (card, err, mb); - - return err; -} - -static void wanpipe_tty_hangup(struct tty_struct *tty) -{ - sdla_t *card; - unsigned long smp_flags; - - printk(KERN_INFO "TTY Hangup!\n"); - - if (!tty){ - return; - } - - card = (sdla_t *)tty->driver_data; - if (!card) - return; - - lock_adapter_irq(&card->wandev.lock,&smp_flags); - set_modem_status(card,0); - unlock_adapter_irq(&card->wandev.lock,&smp_flags); - return; -} - -static void wanpipe_tty_break(struct tty_struct *tty, int break_state) -{ - return; -} - -static void wanpipe_tty_wait_until_sent(struct tty_struct *tty, int timeout) -{ - return; -} - -static void wanpipe_tty_throttle(struct tty_struct * tty) -{ - return; -} - -static void wanpipe_tty_unthrottle(struct tty_struct * tty) -{ - return; -} - -int wanpipe_tty_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - return 0; -} - -/* - * The serial driver boot-time initialization code! - */ -int wanpipe_tty_init(sdla_t *card) -{ - struct serial_state * state; - - /* Initialize the tty_driver structure */ - - if (card->tty_minor < 0 || card->tty_minor > NR_PORTS){ - printk(KERN_INFO "%s: Illegal Minor TTY number (0-4): %i\n", - card->devname,card->tty_minor); - return -EINVAL; - } - - if (WAN_CARD(card->tty_minor)){ - printk(KERN_INFO "%s: TTY Minor %i, already in use\n", - card->devname,card->tty_minor); - return -EBUSY; - } - - if (tty_init_cnt==0){ - - printk(KERN_INFO "%s: TTY %s Driver Init: Major %i, Minor Range %i-%i\n", - card->devname, - card->u.c.async_mode ? "ASYNC" : "SYNC", - WAN_TTY_MAJOR,MIN_PORT,MAX_PORT); - - tty_driver_mode = card->u.c.async_mode; - - memset(&serial_driver, 0, sizeof(struct tty_driver)); - serial_driver.magic = TTY_DRIVER_MAGIC; - serial_driver.owner = THIS_MODULE; - serial_driver.driver_name = "wanpipe_tty"; - serial_driver.name = "ttyW"; - serial_driver.major = WAN_TTY_MAJOR; - serial_driver.minor_start = WAN_TTY_MINOR; - serial_driver.num = NR_PORTS; - serial_driver.type = TTY_DRIVER_TYPE_SERIAL; - serial_driver.subtype = SERIAL_TYPE_NORMAL; - - serial_driver.init_termios = tty_std_termios; - serial_driver.init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver.flags = TTY_DRIVER_REAL_RAW; - - serial_driver.refcount = 1; /* !@!@^#^&!! */ - - serial_driver.open = wanpipe_tty_open; - serial_driver.close = wanpipe_tty_close; - serial_driver.write = wanpipe_tty_write; - - serial_driver.put_char = wanpipe_tty_put_char; - serial_driver.flush_chars = wanpipe_tty_flush_chars; - serial_driver.write_room = wanpipe_tty_write_room; - serial_driver.chars_in_buffer = wanpipe_tty_chars_in_buffer; - serial_driver.flush_buffer = wanpipe_tty_flush_buffer; - //serial_driver.ioctl = wanpipe_tty_ioctl; - serial_driver.throttle = wanpipe_tty_throttle; - serial_driver.unthrottle = wanpipe_tty_unthrottle; - serial_driver.send_xchar = wanpipe_tty_send_xchar; - serial_driver.set_termios = wanpipe_tty_set_termios; - serial_driver.stop = wanpipe_tty_stop; - serial_driver.start = wanpipe_tty_start; - serial_driver.hangup = wanpipe_tty_hangup; - serial_driver.break_ctl = wanpipe_tty_break; - serial_driver.wait_until_sent = wanpipe_tty_wait_until_sent; - serial_driver.read_proc = wanpipe_tty_read_proc; - - if (tty_register_driver(&serial_driver)){ - printk(KERN_INFO "%s: Failed to register serial driver!\n", - card->devname); - } - } - - - /* The subsequent ports must comply to the initial configuration */ - if (tty_driver_mode != card->u.c.async_mode){ - printk(KERN_INFO "%s: Error: TTY Driver operation mode mismatch!\n", - card->devname); - printk(KERN_INFO "%s: The TTY driver is configured for %s!\n", - card->devname, tty_driver_mode ? "ASYNC" : "SYNC"); - return -EINVAL; - } - - tty_init_cnt++; - - printk(KERN_INFO "%s: Initializing TTY %s Driver Minor %i\n", - card->devname, - tty_driver_mode ? "ASYNC" : "SYNC", - card->tty_minor); - - tty_card_map[card->tty_minor] = card; - state = &rs_table[card->tty_minor]; - - state->magic = SSTATE_MAGIC; - state->line = 0; - state->type = PORT_UNKNOWN; - state->custom_divisor = 0; - state->close_delay = 5*HZ/10; - state->closing_wait = 30*HZ; - state->icount.cts = state->icount.dsr = - state->icount.rng = state->icount.dcd = 0; - state->icount.rx = state->icount.tx = 0; - state->icount.frame = state->icount.parity = 0; - state->icount.overrun = state->icount.brk = 0; - state->irq = card->wandev.irq; - - INIT_WORK(&card->tty_work, tty_poll_work, (void*)card); - return 0; -} - - -MODULE_LICENSE("GPL"); - -/****** End ****************************************************************/ |