diff options
Diffstat (limited to 'drivers/net/usb')
-rw-r--r-- | drivers/net/usb/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/usb/ax88179_178a.c | 42 | ||||
-rw-r--r-- | drivers/net/usb/cdc_ether.c | 7 | ||||
-rw-r--r-- | drivers/net/usb/r8152.c | 15 | ||||
-rw-r--r-- | drivers/net/usb/r815x.c | 248 |
5 files changed, 51 insertions, 263 deletions
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 433f0a00c683..e2797f1e1b31 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o -obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o +obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SR9700) += sr9700.o diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 955df81a4358..054e59ca6946 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1029,20 +1029,12 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.phy_id = 0x03; dev->mii.supports_gmii = 1; - if (usb_device_no_sg_constraint(dev->udev)) - dev->can_dma_sg = 1; - dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM; dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM; - if (dev->can_dma_sg) { - dev->net->features |= NETIF_F_SG | NETIF_F_TSO; - dev->net->hw_features |= NETIF_F_SG | NETIF_F_TSO; - } - /* Enable checksum offload */ *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP | AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6; @@ -1395,6 +1387,19 @@ static const struct driver_info ax88178a_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info dlink_dub1312_info = { + .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct driver_info sitecom_info = { .description = "Sitecom USB 3.0 to Gigabit Adapter", .bind = ax88179_bind, @@ -1421,6 +1426,19 @@ static const struct driver_info samsung_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info lenovo_info = { + .description = "Lenovo OneLinkDock Gigabit LAN", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct usb_device_id products[] = { { /* ASIX AX88179 10/100/1000 */ @@ -1431,6 +1449,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0b95, 0x178a), .driver_info = (unsigned long)&ax88178a_info, }, { + /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */ + USB_DEVICE(0x2001, 0x4a00), + .driver_info = (unsigned long)&dlink_dub1312_info, +}, { /* Sitecom USB 3.0 to Gigabit Adapter */ USB_DEVICE(0x0df6, 0x0072), .driver_info = (unsigned long)&sitecom_info, @@ -1438,6 +1460,10 @@ static const struct usb_device_id products[] = { /* Samsung USB Ethernet Adapter */ USB_DEVICE(0x04e8, 0xa100), .driver_info = (unsigned long)&samsung_info, +}, { + /* Lenovo OneLinkDock Gigabit LAN */ + USB_DEVICE(0x17ef, 0x304b), + .driver_info = (unsigned long)&lenovo_info, }, { }, }; diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 42e176912c8e..bd363b27e854 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -652,6 +652,13 @@ static const struct usb_device_id products[] = { .driver_info = 0, }, +/* Samsung USB Ethernet Adapters */ +{ + USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + /* WHITELIST!!! * * CDC Ether uses two interfaces, not necessarily consecutive. diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index d89dbe395ad2..adb12f349a61 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -449,9 +449,6 @@ enum rtl8152_flags { #define MCU_TYPE_PLA 0x0100 #define MCU_TYPE_USB 0x0000 -#define REALTEK_USB_DEVICE(vend, prod) \ - USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) - struct rx_desc { __le32 opts1; #define RX_LEN_MASK 0x7fff @@ -2739,6 +2736,12 @@ static int rtl8152_probe(struct usb_interface *intf, struct net_device *netdev; int ret; + if (udev->actconfig->desc.bConfigurationValue != 1) { + usb_driver_set_configuration(udev, 1); + return -ENODEV; + } + + usb_reset_device(udev); netdev = alloc_etherdev(sizeof(struct r8152)); if (!netdev) { dev_err(&intf->dev, "Out of memory\n"); @@ -2819,9 +2822,9 @@ static void rtl8152_disconnect(struct usb_interface *intf) /* table of devices that work with this driver */ static struct usb_device_id rtl8152_table[] = { - {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, - {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)}, - {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)}, + {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, + {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)}, + {USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)}, {} }; diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c deleted file mode 100644 index f0a8791b7636..000000000000 --- a/drivers/net/usb/r815x.c +++ /dev/null @@ -1,248 +0,0 @@ -#include <linux/module.h> -#include <linux/netdevice.h> -#include <linux/mii.h> -#include <linux/usb.h> -#include <linux/usb/cdc.h> -#include <linux/usb/usbnet.h> - -#define RTL815x_REQT_READ 0xc0 -#define RTL815x_REQT_WRITE 0x40 -#define RTL815x_REQ_GET_REGS 0x05 -#define RTL815x_REQ_SET_REGS 0x05 - -#define MCU_TYPE_PLA 0x0100 -#define OCP_BASE 0xe86c -#define BASE_MII 0xa400 - -#define BYTE_EN_DWORD 0xff -#define BYTE_EN_WORD 0x33 -#define BYTE_EN_BYTE 0x11 - -#define R815x_PHY_ID 32 -#define REALTEK_VENDOR_ID 0x0bda - - -static int pla_read_word(struct usb_device *udev, u16 index) -{ - int ret; - u8 shift = index & 2; - __le32 *tmp; - - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - return -ENOMEM; - - index &= ~3; - - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, - index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500); - if (ret < 0) - goto out2; - - ret = __le32_to_cpu(*tmp); - ret >>= (shift * 8); - ret &= 0xffff; - -out2: - kfree(tmp); - return ret; -} - -static int pla_write_word(struct usb_device *udev, u16 index, u32 data) -{ - __le32 *tmp; - u32 mask = 0xffff; - u16 byen = BYTE_EN_WORD; - u8 shift = index & 2; - int ret; - - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - return -ENOMEM; - - data &= mask; - - if (shift) { - byen <<= shift; - mask <<= (shift * 8); - data <<= (shift * 8); - index &= ~3; - } - - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, - index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500); - if (ret < 0) - goto out3; - - data |= __le32_to_cpu(*tmp) & ~mask; - *tmp = __cpu_to_le32(data); - - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE, - index, MCU_TYPE_PLA | byen, tmp, sizeof(*tmp), - 500); - -out3: - kfree(tmp); - return ret; -} - -static int ocp_reg_read(struct usbnet *dev, u16 addr) -{ - u16 ocp_base, ocp_index; - int ret; - - ocp_base = addr & 0xf000; - ret = pla_write_word(dev->udev, OCP_BASE, ocp_base); - if (ret < 0) - goto out; - - ocp_index = (addr & 0x0fff) | 0xb000; - ret = pla_read_word(dev->udev, ocp_index); - -out: - return ret; -} - -static int ocp_reg_write(struct usbnet *dev, u16 addr, u16 data) -{ - u16 ocp_base, ocp_index; - int ret; - - ocp_base = addr & 0xf000; - ret = pla_write_word(dev->udev, OCP_BASE, ocp_base); - if (ret < 0) - goto out1; - - ocp_index = (addr & 0x0fff) | 0xb000; - ret = pla_write_word(dev->udev, ocp_index, data); - -out1: - return ret; -} - -static int r815x_mdio_read(struct net_device *netdev, int phy_id, int reg) -{ - struct usbnet *dev = netdev_priv(netdev); - int ret; - - if (phy_id != R815x_PHY_ID) - return -EINVAL; - - if (usb_autopm_get_interface(dev->intf) < 0) - return -ENODEV; - - ret = ocp_reg_read(dev, BASE_MII + reg * 2); - - usb_autopm_put_interface(dev->intf); - return ret; -} - -static -void r815x_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) -{ - struct usbnet *dev = netdev_priv(netdev); - - if (phy_id != R815x_PHY_ID) - return; - - if (usb_autopm_get_interface(dev->intf) < 0) - return; - - ocp_reg_write(dev, BASE_MII + reg * 2, val); - - usb_autopm_put_interface(dev->intf); -} - -static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int status; - - status = usbnet_cdc_bind(dev, intf); - if (status < 0) - return status; - - dev->mii.dev = dev->net; - dev->mii.mdio_read = r815x_mdio_read; - dev->mii.mdio_write = r815x_mdio_write; - dev->mii.phy_id_mask = 0x3f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = R815x_PHY_ID; - dev->mii.supports_gmii = 1; - - return status; -} - -static int r8152_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int status; - - status = usbnet_cdc_bind(dev, intf); - if (status < 0) - return status; - - dev->mii.dev = dev->net; - dev->mii.mdio_read = r815x_mdio_read; - dev->mii.mdio_write = r815x_mdio_write; - dev->mii.phy_id_mask = 0x3f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = R815x_PHY_ID; - dev->mii.supports_gmii = 0; - - return status; -} - -static const struct driver_info r8152_info = { - .description = "RTL8152 ECM Device", - .flags = FLAG_ETHER | FLAG_POINTTOPOINT, - .bind = r8152_bind, - .unbind = usbnet_cdc_unbind, - .status = usbnet_cdc_status, - .manage_power = usbnet_manage_power, -}; - -static const struct driver_info r8153_info = { - .description = "RTL8153 ECM Device", - .flags = FLAG_ETHER | FLAG_POINTTOPOINT, - .bind = r8153_bind, - .unbind = usbnet_cdc_unbind, - .status = usbnet_cdc_status, - .manage_power = usbnet_manage_power, -}; - -static const struct usb_device_id products[] = { -{ - USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM, - USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), - .driver_info = (unsigned long) &r8152_info, -}, - -{ - USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM, - USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), - .driver_info = (unsigned long) &r8153_info, -}, - - { }, /* END */ -}; -MODULE_DEVICE_TABLE(usb, products); - -static struct usb_driver r815x_driver = { - .name = "r815x", - .id_table = products, - .probe = usbnet_probe, - .disconnect = usbnet_disconnect, - .suspend = usbnet_suspend, - .resume = usbnet_resume, - .reset_resume = usbnet_resume, - .supports_autosuspend = 1, - .disable_hub_initiated_lpm = 1, -}; - -module_usb_driver(r815x_driver); - -MODULE_AUTHOR("Hayes Wang"); -MODULE_DESCRIPTION("Realtek USB ECM device"); -MODULE_LICENSE("GPL"); |