diff options
Diffstat (limited to 'drivers/net/tokenring/3c359.c')
| -rw-r--r-- | drivers/net/tokenring/3c359.c | 1831 |
1 files changed, 0 insertions, 1831 deletions
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c deleted file mode 100644 index 0924f572f59b..000000000000 --- a/drivers/net/tokenring/3c359.c +++ /dev/null @@ -1,1831 +0,0 @@ -/* - * 3c359.c (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved - * - * Linux driver for 3Com 3c359 Tokenlink Velocity XL PCI NIC - * - * Base Driver Olympic: - * Written 1999 Peter De Schrijver & Mike Phillips - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * 7/17/00 - Clean up, version number 0.9.0. Ready to release to the world. - * - * 2/16/01 - Port up to kernel 2.4.2 ready for submission into the kernel. - * 3/05/01 - Last clean up stuff before submission. - * 2/15/01 - Finally, update to new pci api. - * - * To Do: - */ - -/* - * Technical Card Details - * - * All access to data is done with 16/8 bit transfers. The transfer - * method really sucks. You can only read or write one location at a time. - * - * Also, the microcode for the card must be uploaded if the card does not have - * the flashrom on board. This is a 28K bloat in the driver when compiled - * as a module. - * - * Rx is very simple, status into a ring of descriptors, dma data transfer, - * interrupts to tell us when a packet is received. - * - * Tx is a little more interesting. Similar scenario, descriptor and dma data - * transfers, but we don't have to interrupt the card to tell it another packet - * is ready for transmission, we are just doing simple memory writes, not io or mmio - * writes. The card can be set up to simply poll on the next - * descriptor pointer and when this value is non-zero will automatically download - * the next packet. The card then interrupts us when the packet is done. - * - */ - -#define XL_DEBUG 0 - -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/timer.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/ptrace.h> -#include <linux/skbuff.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <linux/firmware.h> -#include <linux/slab.h> - -#include <net/checksum.h> - -#include <asm/io.h> - -#include "3c359.h" - -static char version[] __devinitdata = -"3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ; - -#define FW_NAME "3com/3C359.bin" -MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; -MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver\n") ; -MODULE_FIRMWARE(FW_NAME); - -/* Module parameters */ - -/* Ring Speed 0,4,16 - * 0 = Autosense - * 4,16 = Selected speed only, no autosense - * This allows the card to be the first on the ring - * and become the active monitor. - * - * WARNING: Some hubs will allow you to insert - * at the wrong speed. - * - * The adapter will _not_ fail to open if there are no - * active monitors on the ring, it will simply open up in - * its last known ringspeed if no ringspeed is specified. - */ - -static int ringspeed[XL_MAX_ADAPTERS] = {0,} ; - -module_param_array(ringspeed, int, NULL, 0); -MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; - -/* Packet buffer size */ - -static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ; - -module_param_array(pkt_buf_sz, int, NULL, 0) ; -MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; -/* Message Level */ - -static int message_level[XL_MAX_ADAPTERS] = {0,} ; - -module_param_array(message_level, int, NULL, 0) ; -MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ; -/* - * This is a real nasty way of doing this, but otherwise you - * will be stuck with 1555 lines of hex #'s in the code. - */ - -static DEFINE_PCI_DEVICE_TABLE(xl_pci_tbl) = -{ - {PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, }, - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci,xl_pci_tbl) ; - -static int xl_init(struct net_device *dev); -static int xl_open(struct net_device *dev); -static int xl_open_hw(struct net_device *dev) ; -static int xl_hw_reset(struct net_device *dev); -static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev); -static void xl_dn_comp(struct net_device *dev); -static int xl_close(struct net_device *dev); -static void xl_set_rx_mode(struct net_device *dev); -static irqreturn_t xl_interrupt(int irq, void *dev_id); -static int xl_set_mac_address(struct net_device *dev, void *addr) ; -static void xl_arb_cmd(struct net_device *dev); -static void xl_asb_cmd(struct net_device *dev) ; -static void xl_srb_cmd(struct net_device *dev, int srb_cmd) ; -static void xl_wait_misr_flags(struct net_device *dev) ; -static int xl_change_mtu(struct net_device *dev, int mtu); -static void xl_srb_bh(struct net_device *dev) ; -static void xl_asb_bh(struct net_device *dev) ; -static void xl_reset(struct net_device *dev) ; -static void xl_freemem(struct net_device *dev) ; - - -/* EEProm Access Functions */ -static u16 xl_ee_read(struct net_device *dev, int ee_addr) ; -static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) ; - -/* Debugging functions */ -#if XL_DEBUG -static void print_tx_state(struct net_device *dev) ; -static void print_rx_state(struct net_device *dev) ; - -static void print_tx_state(struct net_device *dev) -{ - - struct xl_private *xl_priv = netdev_priv(dev); - struct xl_tx_desc *txd ; - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - int i ; - - printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d\n",xl_priv->tx_ring_head, - xl_priv->tx_ring_tail, xl_priv->free_ring_entries) ; - printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len\n"); - for (i = 0; i < 16; i++) { - txd = &(xl_priv->xl_tx_ring[i]) ; - printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(txd), - txd->framestartheader, txd->dnnextptr, txd->buffer, txd->buffer_length ) ; - } - - printk("DNLISTPTR = %04x\n", readl(xl_mmio + MMIO_DNLISTPTR) ); - - printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL) ); - printk("Queue status = %0x\n",netif_running(dev) ) ; -} - -static void print_rx_state(struct net_device *dev) -{ - - struct xl_private *xl_priv = netdev_priv(dev); - struct xl_rx_desc *rxd ; - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - int i ; - - printk("rx_ring_tail: %d\n", xl_priv->rx_ring_tail); - printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len\n"); - for (i = 0; i < 16; i++) { - /* rxd = (struct xl_rx_desc *)xl_priv->rx_ring_dma_addr + (i * sizeof(struct xl_rx_desc)) ; */ - rxd = &(xl_priv->xl_rx_ring[i]) ; - printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(rxd), - rxd->framestatus, rxd->upnextptr, rxd->upfragaddr, rxd->upfraglen ) ; - } - - printk("UPLISTPTR = %04x\n", readl(xl_mmio + MMIO_UPLISTPTR)); - - printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL)); - printk("Queue status = %0x\n",netif_running(dev)); -} -#endif - -/* - * Read values from the on-board EEProm. This looks very strange - * but you have to wait for the EEProm to get/set the value before - * passing/getting the next value from the nic. As with all requests - * on this nic it has to be done in two stages, a) tell the nic which - * memory address you want to access and b) pass/get the value from the nic. - * With the EEProm, you have to wait before and between access a) and b). - * As this is only read at initialization time and the wait period is very - * small we shouldn't have to worry about scheduling issues. - */ - -static u16 xl_ee_read(struct net_device *dev, int ee_addr) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Tell EEProm what we want to do and where */ - writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Tell EEProm what we want to do and where */ - writel(IO_WORD_WRITE | EECONTROL , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ; - - /* Finally read the value from the EEProm */ - writel(IO_WORD_READ | EEDATA , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - return readw(xl_mmio + MMIO_MACDATA) ; -} - -/* - * Write values to the onboard eeprom. As with eeprom read you need to - * set which location to write, wait, value to write, wait, with the - * added twist of having to enable eeprom writes as well. - */ - -static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Enable write/erase */ - writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EE_ENABLE_WRITE, xl_mmio + MMIO_MACDATA) ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Put the value we want to write into EEDATA */ - writel(IO_WORD_WRITE | EEDATA, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(ee_value, xl_mmio + MMIO_MACDATA) ; - - /* Tell EEProm to write eevalue into ee_addr */ - writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EEWRITE + ee_addr, xl_mmio + MMIO_MACDATA) ; - - /* Wait for EEProm to not be busy, to ensure write gets done */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - return ; -} - -static const struct net_device_ops xl_netdev_ops = { - .ndo_open = xl_open, - .ndo_stop = xl_close, - .ndo_start_xmit = xl_xmit, - .ndo_change_mtu = xl_change_mtu, - .ndo_set_rx_mode = xl_set_rx_mode, - .ndo_set_mac_address = xl_set_mac_address, -}; - -static int __devinit xl_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev ; - struct xl_private *xl_priv ; - static int card_no = -1 ; - int i ; - - card_no++ ; - - if (pci_enable_device(pdev)) { - return -ENODEV ; - } - - pci_set_master(pdev); - - if ((i = pci_request_regions(pdev,"3c359"))) { - return i ; - } - - /* - * Allowing init_trdev to allocate the private data will align - * xl_private on a 32 bytes boundary which we need for the rx/tx - * descriptors - */ - - dev = alloc_trdev(sizeof(struct xl_private)) ; - if (!dev) { - pci_release_regions(pdev) ; - return -ENOMEM ; - } - xl_priv = netdev_priv(dev); - -#if XL_DEBUG - printk("pci_device: %p, dev:%p, dev->priv: %p, ba[0]: %10x, ba[1]:%10x\n", - pdev, dev, netdev_priv(dev), (unsigned int)pdev->resource[0].start, (unsigned int)pdev->resource[1].start); -#endif - - dev->irq=pdev->irq; - dev->base_addr=pci_resource_start(pdev,0) ; - xl_priv->xl_card_name = pci_name(pdev); - xl_priv->xl_mmio=ioremap(pci_resource_start(pdev,1), XL_IO_SPACE); - xl_priv->pdev = pdev ; - - if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) - xl_priv->pkt_buf_sz = PKT_BUF_SZ ; - else - xl_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; - - dev->mtu = xl_priv->pkt_buf_sz - TR_HLEN ; - xl_priv->xl_ring_speed = ringspeed[card_no] ; - xl_priv->xl_message_level = message_level[card_no] ; - xl_priv->xl_functional_addr[0] = xl_priv->xl_functional_addr[1] = xl_priv->xl_functional_addr[2] = xl_priv->xl_functional_addr[3] = 0 ; - xl_priv->xl_copy_all_options = 0 ; - - if((i = xl_init(dev))) { - iounmap(xl_priv->xl_mmio) ; - free_netdev(dev) ; - pci_release_regions(pdev) ; - return i ; - } - - dev->netdev_ops = &xl_netdev_ops; - SET_NETDEV_DEV(dev, &pdev->dev); - - pci_set_drvdata(pdev,dev) ; - if ((i = register_netdev(dev))) { - printk(KERN_ERR "3C359, register netdev failed\n") ; - pci_set_drvdata(pdev,NULL) ; - iounmap(xl_priv->xl_mmio) ; - free_netdev(dev) ; - pci_release_regions(pdev) ; - return i ; - } - - printk(KERN_INFO "3C359: %s registered as: %s\n",xl_priv->xl_card_name,dev->name) ; - - return 0; -} - -static int xl_init_firmware(struct xl_private *xl_priv) -{ - int err; - - err = request_firmware(&xl_priv->fw, FW_NAME, &xl_priv->pdev->dev); - if (err) { - printk(KERN_ERR "Failed to load firmware \"%s\"\n", FW_NAME); - return err; - } - - if (xl_priv->fw->size < 16) { - printk(KERN_ERR "Bogus length %zu in \"%s\"\n", - xl_priv->fw->size, FW_NAME); - release_firmware(xl_priv->fw); - err = -EINVAL; - } - - return err; -} - -static int __devinit xl_init(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - int err; - - printk(KERN_INFO "%s\n", version); - printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n", - xl_priv->xl_card_name, (unsigned int)dev->base_addr ,xl_priv->xl_mmio, dev->irq); - - spin_lock_init(&xl_priv->xl_lock) ; - - err = xl_init_firmware(xl_priv); - if (err == 0) - err = xl_hw_reset(dev); - - return err; -} - - -/* - * Hardware reset. This needs to be a separate entity as we need to reset the card - * when we change the EEProm settings. - */ - -static int xl_hw_reset(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - unsigned long t ; - u16 i ; - u16 result_16 ; - u8 result_8 ; - u16 start ; - int j ; - - if (xl_priv->fw == NULL) - return -EINVAL; - - /* - * Reset the card. If the card has got the microcode on board, we have - * missed the initialization interrupt, so we must always do this. - */ - - writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ; - - /* - * Must wait for cmdInProgress bit (12) to clear before continuing with - * card configuration. - */ - - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global reset.\n", dev->name); - return -ENODEV; - } - } - - /* - * Enable pmbar by setting bit in CPAttention - */ - - writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - result_8 = readb(xl_mmio + MMIO_MACDATA) ; - result_8 = result_8 | CPA_PMBARVIS ; - writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(result_8, xl_mmio + MMIO_MACDATA) ; - - /* - * Read cpHold bit in pmbar, if cleared we have got Flashrom on board. - * If not, we need to upload the microcode to the card - */ - - writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD); - -#if XL_DEBUG - printk(KERN_INFO "Read from PMBAR = %04x\n", readw(xl_mmio + MMIO_MACDATA)); -#endif - - if ( readw( (xl_mmio + MMIO_MACDATA)) & PMB_CPHOLD ) { - - /* Set PmBar, privateMemoryBase bits (8:2) to 0 */ - - writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD); - result_16 = readw(xl_mmio + MMIO_MACDATA) ; - result_16 = result_16 & ~((0x7F) << 2) ; - writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(result_16,xl_mmio + MMIO_MACDATA) ; - - /* Set CPAttention, memWrEn bit */ - - writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - result_8 = readb(xl_mmio + MMIO_MACDATA) ; - result_8 = result_8 | CPA_MEMWREN ; - writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(result_8, xl_mmio + MMIO_MACDATA) ; - - /* - * Now to write the microcode into the shared ram - * The microcode must finish at position 0xFFFF, - * so we must subtract to get the start position for the code - * - * Looks strange but ensures compiler only uses - * 16 bit unsigned int - */ - start = (0xFFFF - (xl_priv->fw->size) + 1) ; - - printk(KERN_INFO "3C359: Uploading Microcode: "); - - for (i = start, j = 0; j < xl_priv->fw->size; i++, j++) { - writel(MEM_BYTE_WRITE | 0XD0000 | i, - xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(xl_priv->fw->data[j], xl_mmio + MMIO_MACDATA); - if (j % 1024 == 0) - printk("."); - } - printk("\n") ; - - for (i = 0; i < 16; i++) { - writel((MEM_BYTE_WRITE | 0xDFFF0) + i, - xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(xl_priv->fw->data[xl_priv->fw->size - 16 + i], - xl_mmio + MMIO_MACDATA); - } - - /* - * Have to write the start address of the upload to FFF4, but - * the address must be >> 4. You do not want to know how long - * it took me to discover this. - */ - - writel(MEM_WORD_WRITE | 0xDFFF4, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(start >> 4, xl_mmio + MMIO_MACDATA); - - /* Clear the CPAttention, memWrEn Bit */ - - writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - result_8 = readb(xl_mmio + MMIO_MACDATA) ; - result_8 = result_8 & ~CPA_MEMWREN ; - writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(result_8, xl_mmio + MMIO_MACDATA) ; - - /* Clear the cpHold bit in pmbar */ - - writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD); - result_16 = readw(xl_mmio + MMIO_MACDATA) ; - result_16 = result_16 & ~PMB_CPHOLD ; - writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(result_16,xl_mmio + MMIO_MACDATA) ; - - - } /* If microcode upload required */ - - /* - * The card should now go though a self test procedure and get itself ready - * to be opened, we must wait for an srb response with the initialization - * information. - */ - -#if XL_DEBUG - printk(KERN_INFO "%s: Microcode uploaded, must wait for the self test to complete\n", dev->name); -#endif - - writew(SETINDENABLE | 0xFFF, xl_mmio + MMIO_COMMAND) ; - - t=jiffies; - while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) { - schedule(); - if (time_after(jiffies, t + 15 * HZ)) { - printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n"); - return -ENODEV; - } - } - - /* - * Write the RxBufArea with D000, RxEarlyThresh, TxStartThresh, - * DnPriReqThresh, read the tech docs if you want to know what - * values they need to be. - */ - - writel(MMIO_WORD_WRITE | RXBUFAREA, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(0xD000, xl_mmio + MMIO_MACDATA) ; - - writel(MMIO_WORD_WRITE | RXEARLYTHRESH, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(0X0020, xl_mmio + MMIO_MACDATA) ; - - writew( SETTXSTARTTHRESH | 0x40 , xl_mmio + MMIO_COMMAND) ; - - writeb(0x04, xl_mmio + MMIO_DNBURSTTHRESH) ; - writeb(0x04, xl_mmio + DNPRIREQTHRESH) ; - - /* - * Read WRBR to provide the location of the srb block, have to use byte reads not word reads. - * Tech docs have this wrong !!!! - */ - - writel(MMIO_BYTE_READ | WRBR, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->srb = readb(xl_mmio + MMIO_MACDATA) << 8 ; - writel( (MMIO_BYTE_READ | WRBR) + 1, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->srb = xl_priv->srb | readb(xl_mmio + MMIO_MACDATA) ; - -#if XL_DEBUG - writel(IO_WORD_READ | SWITCHSETTINGS, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if ( readw(xl_mmio + MMIO_MACDATA) & 2) { - printk(KERN_INFO "Default ring speed 4 mbps\n"); - } else { - printk(KERN_INFO "Default ring speed 16 mbps\n"); - } - printk(KERN_INFO "%s: xl_priv->srb = %04x\n",xl_priv->xl_card_name, xl_priv->srb); -#endif - - return 0; -} - -static int xl_open(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - u8 i ; - __le16 hwaddr[3] ; /* Should be u8[6] but we get word return values */ - int open_err ; - - u16 switchsettings, switchsettings_eeprom ; - - if (request_irq(dev->irq, xl_interrupt, IRQF_SHARED , "3c359", dev)) - return -EAGAIN; - - /* - * Read the information from the EEPROM that we need. - */ - - hwaddr[0] = cpu_to_le16(xl_ee_read(dev,0x10)); - hwaddr[1] = cpu_to_le16(xl_ee_read(dev,0x11)); - hwaddr[2] = cpu_to_le16(xl_ee_read(dev,0x12)); - - /* Ring speed */ - - switchsettings_eeprom = xl_ee_read(dev,0x08) ; - switchsettings = switchsettings_eeprom ; - - if (xl_priv->xl_ring_speed != 0) { - if (xl_priv->xl_ring_speed == 4) - switchsettings = switchsettings | 0x02 ; - else - switchsettings = switchsettings & ~0x02 ; - } - - /* Only write EEProm if there has been a change */ - if (switchsettings != switchsettings_eeprom) { - xl_ee_write(dev,0x08,switchsettings) ; - /* Hardware reset after changing EEProm */ - xl_hw_reset(dev) ; - } - - memcpy(dev->dev_addr,hwaddr,dev->addr_len) ; - - open_err = xl_open_hw(dev) ; - - /* - * This really needs to be cleaned up with better error reporting. - */ - - if (open_err != 0) { /* Something went wrong with the open command */ - if (open_err & 0x07) { /* Wrong speed, retry at different speed */ - printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed\n", dev->name); - switchsettings = switchsettings ^ 2 ; - xl_ee_write(dev,0x08,switchsettings) ; - xl_hw_reset(dev) ; - open_err = xl_open_hw(dev) ; - if (open_err != 0) { - printk(KERN_WARNING "%s: Open error returned a second time, we're bombing out now\n", dev->name); - free_irq(dev->irq,dev) ; - return -ENODEV ; - } - } else { - printk(KERN_WARNING "%s: Open Error = %04x\n", dev->name, open_err) ; - free_irq(dev->irq,dev) ; - return -ENODEV ; - } - } - - /* - * Now to set up the Rx and Tx buffer structures - */ - /* These MUST be on 8 byte boundaries */ - xl_priv->xl_tx_ring = kzalloc((sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE) + 7, GFP_DMA | GFP_KERNEL); - if (xl_priv->xl_tx_ring == NULL) { - free_irq(dev->irq,dev); - return -ENOMEM; - } - xl_priv->xl_rx_ring = kzalloc((sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE) +7, GFP_DMA | GFP_KERNEL); - if (xl_priv->xl_rx_ring == NULL) { - free_irq(dev->irq,dev); - kfree(xl_priv->xl_tx_ring); - return -ENOMEM; - } - - /* Setup Rx Ring */ - for (i=0 ; i < XL_RX_RING_SIZE ; i++) { - struct sk_buff *skb ; - - skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ; - if (skb==NULL) - break ; - - skb->dev = dev ; - xl_priv->xl_rx_ring[i].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - xl_priv->xl_rx_ring[i].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG; - xl_priv->rx_ring_skb[i] = skb ; - } - - if (i==0) { - printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); - free_irq(dev->irq,dev) ; - kfree(xl_priv->xl_tx_ring); - kfree(xl_priv->xl_rx_ring); - return -EIO ; - } - - xl_priv->rx_ring_no = i ; - xl_priv->rx_ring_tail = 0 ; - xl_priv->rx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_rx_ring, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_TODEVICE) ; - for (i=0;i<(xl_priv->rx_ring_no-1);i++) { - xl_priv->xl_rx_ring[i].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1))); - } - xl_priv->xl_rx_ring[i].upnextptr = 0 ; - - writel(xl_priv->rx_ring_dma_addr, xl_mmio + MMIO_UPLISTPTR) ; - - /* Setup Tx Ring */ - - xl_priv->tx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_tx_ring, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE,PCI_DMA_TODEVICE) ; - - xl_priv->tx_ring_head = 1 ; - xl_priv->tx_ring_tail = 255 ; /* Special marker for first packet */ - xl_priv->free_ring_entries = XL_TX_RING_SIZE ; - - /* - * Setup the first dummy DPD entry for polling to start working. - */ - - xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY; - xl_priv->xl_tx_ring[0].buffer = 0 ; - xl_priv->xl_tx_ring[0].buffer_length = 0 ; - xl_priv->xl_tx_ring[0].dnnextptr = 0 ; - - writel(xl_priv->tx_ring_dma_addr, xl_mmio + MMIO_DNLISTPTR) ; - writel(DNUNSTALL, xl_mmio + MMIO_COMMAND) ; - writel(UPUNSTALL, xl_mmio + MMIO_COMMAND) ; - writel(DNENABLE, xl_mmio + MMIO_COMMAND) ; - writeb(0x40, xl_mmio + MMIO_DNPOLL) ; - - /* - * Enable interrupts on the card - */ - - writel(SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - writel(SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - - netif_start_queue(dev) ; - return 0; - -} - -static int xl_open_hw(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - u16 vsoff ; - char ver_str[33]; - int open_err ; - int i ; - unsigned long t ; - - /* - * Okay, let's build up the Open.NIC srb command - * - */ - - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(OPEN_NIC, xl_mmio + MMIO_MACDATA) ; - - /* - * Use this as a test byte, if it comes back with the same value, the command didn't work - */ - - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb)+ 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0xff,xl_mmio + MMIO_MACDATA) ; - - /* Open options */ - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x00, xl_mmio + MMIO_MACDATA) ; - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 9, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x00, xl_mmio + MMIO_MACDATA) ; - - /* - * Node address, be careful here, the docs say you can just put zeros here and it will use - * the hardware address, it doesn't, you must include the node address in the open command. - */ - - if (xl_priv->xl_laa[0]) { /* If using a LAA address */ - for (i=10;i<16;i++) { - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_laa[i-10],xl_mmio + MMIO_MACDATA) ; - } - memcpy(dev->dev_addr,xl_priv->xl_laa,dev->addr_len) ; - } else { /* Regular hardware address */ - for (i=10;i<16;i++) { - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(dev->dev_addr[i-10], xl_mmio + MMIO_MACDATA) ; - } - } - - /* Default everything else to 0 */ - for (i = 16; i < 34; i++) { - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x00,xl_mmio + MMIO_MACDATA) ; - } - - /* - * Set the csrb bit in the MISR register - */ - - xl_wait_misr_flags(dev) ; - writel(MEM_BYTE_WRITE | MF_CSRB, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0xFF, xl_mmio + MMIO_MACDATA) ; - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_CSRB , xl_mmio + MMIO_MACDATA) ; - - /* - * Now wait for the command to run - */ - - t=jiffies; - while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) { - schedule(); - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n"); - break ; - } - } - - /* - * Let's interpret the open response - */ - - writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb)+2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA)!=0) { - open_err = readb(xl_mmio + MMIO_MACDATA) << 8 ; - writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb) + 7, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - open_err |= readb(xl_mmio + MMIO_MACDATA) ; - return open_err ; - } else { - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->asb = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - printk(KERN_INFO "%s: Adapter Opened Details: ",dev->name) ; - printk("ASB: %04x",xl_priv->asb ) ; - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 10, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - printk(", SRB: %04x",swab16(readw(xl_mmio + MMIO_MACDATA)) ) ; - - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->arb = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - printk(", ARB: %04x\n",xl_priv->arb ); - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - vsoff = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - - /* - * Interesting, sending the individual characters directly to printk was causing klogd to use - * use 100% of processor time, so we build up the string and print that instead. - */ - - for (i=0;i<0x20;i++) { - writel( (MEM_BYTE_READ | 0xD0000 | vsoff) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - ver_str[i] = readb(xl_mmio + MMIO_MACDATA) ; - } - ver_str[i] = '\0' ; - printk(KERN_INFO "%s: Microcode version String: %s\n",dev->name,ver_str); - } - - /* - * Issue the AckInterrupt - */ - writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - return 0 ; -} - -/* - * There are two ways of implementing rx on the 359 NIC, either - * interrupt driven or polling. We are going to uses interrupts, - * it is the easier way of doing things. - * - * The Rx works with a ring of Rx descriptors. At initialise time the ring - * entries point to the next entry except for the last entry in the ring - * which points to 0. The card is programmed with the location of the first - * available descriptor and keeps reading the next_ptr until next_ptr is set - * to 0. Hopefully with a ring size of 16 the card will never get to read a next_ptr - * of 0. As the Rx interrupt is received we copy the frame up to the protocol layers - * and then point the end of the ring to our current position and point our current - * position to 0, therefore making the current position the last position on the ring. - * The last position on the ring therefore loops continually loops around the rx ring. - * - * rx_ring_tail is the position on the ring to process next. (Think of a snake, the head - * expands as the card adds new packets and we go around eating the tail processing the - * packets.) - * - * Undoubtably it could be streamlined and improved upon, but at the moment it works - * and the fast path through the routine is fine. - * - * adv_rx_ring could be inlined to increase performance, but its called a *lot* of times - * in xl_rx so would increase the size of the function significantly. - */ - -static void adv_rx_ring(struct net_device *dev) /* Advance rx_ring, cut down on bloat in xl_rx */ -{ - struct xl_private *xl_priv=netdev_priv(dev); - int n = xl_priv->rx_ring_tail; - int prev_ring_loc; - - prev_ring_loc = (n + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1); - xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * n)); - xl_priv->xl_rx_ring[n].framestatus = 0; - xl_priv->xl_rx_ring[n].upnextptr = 0; - xl_priv->rx_ring_tail++; - xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1); -} - -static void xl_rx(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - struct sk_buff *skb, *skb2 ; - int frame_length = 0, copy_len = 0 ; - int temp_ring_loc ; - - /* - * Receive the next frame, loop around the ring until all frames - * have been received. - */ - - while (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & (RXUPDCOMPLETE | RXUPDFULL) ) { /* Descriptor to process */ - - if (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & RXUPDFULL ) { /* UpdFull, Multiple Descriptors used for the frame */ - - /* - * This is a pain, you need to go through all the descriptors until the last one - * for this frame to find the framelength - */ - - temp_ring_loc = xl_priv->rx_ring_tail ; - - while (xl_priv->xl_rx_ring[temp_ring_loc].framestatus & RXUPDFULL ) { - temp_ring_loc++ ; - temp_ring_loc &= (XL_RX_RING_SIZE-1) ; - } - - frame_length = le32_to_cpu(xl_priv->xl_rx_ring[temp_ring_loc].framestatus) & 0x7FFF; - - skb = dev_alloc_skb(frame_length) ; - - if (skb==NULL) { /* No memory for frame, still need to roll forward the rx ring */ - printk(KERN_WARNING "%s: dev_alloc_skb failed - multi buffer !\n", dev->name) ; - while (xl_priv->rx_ring_tail != temp_ring_loc) - adv_rx_ring(dev) ; - - adv_rx_ring(dev) ; /* One more time just for luck :) */ - dev->stats.rx_dropped++ ; - - writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - return ; - } - - while (xl_priv->rx_ring_tail != temp_ring_loc) { - copy_len = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen) & 0x7FFF; - frame_length -= copy_len ; - pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail], - skb_put(skb, copy_len), - copy_len); - pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - adv_rx_ring(dev) ; - } - - /* Now we have found the last fragment */ - pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail], - skb_put(skb,copy_len), frame_length); -/* memcpy(skb_put(skb,frame_length), bus_to_virt(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), frame_length) ; */ - pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - adv_rx_ring(dev) ; - skb->protocol = tr_type_trans(skb,dev) ; - netif_rx(skb) ; - - } else { /* Single Descriptor Used, simply swap buffers over, fast path */ - - frame_length = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus) & 0x7FFF; - - skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ; - - if (skb==NULL) { /* Still need to fix the rx ring */ - printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer\n",dev->name); - adv_rx_ring(dev) ; - dev->stats.rx_dropped++ ; - writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - return ; - } - - skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ; - pci_unmap_single(xl_priv->pdev, le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb_put(skb2, frame_length) ; - skb2->protocol = tr_type_trans(skb2,dev) ; - - xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] = skb ; - xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG; - adv_rx_ring(dev) ; - dev->stats.rx_packets++ ; - dev->stats.rx_bytes += frame_length ; - - netif_rx(skb2) ; - } /* if multiple buffers */ - } /* while packet to do */ - - /* Clear the updComplete interrupt */ - writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - return ; -} - -/* - * This is ruthless, it doesn't care what state the card is in it will - * completely reset the adapter. - */ - -static void xl_reset(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - unsigned long t; - - writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ; - - /* - * Must wait for cmdInProgress bit (12) to clear before continuing with - * card configuration. - */ - - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n"); - break ; - } - } - -} - -static void xl_freemem(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - int i ; - - for (i=0;i<XL_RX_RING_SIZE;i++) { - dev_kfree_skb_irq(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]) ; - pci_unmap_single(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); - xl_priv->rx_ring_tail++ ; - xl_priv->rx_ring_tail &= XL_RX_RING_SIZE-1; - } - - /* unmap ring */ - pci_unmap_single(xl_priv->pdev,xl_priv->rx_ring_dma_addr, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_FROMDEVICE) ; - - pci_unmap_single(xl_priv->pdev,xl_priv->tx_ring_dma_addr, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE, PCI_DMA_TODEVICE) ; - - kfree(xl_priv->xl_rx_ring) ; - kfree(xl_priv->xl_tx_ring) ; - - return ; -} - -static irqreturn_t xl_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct xl_private *xl_priv =netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u16 intstatus, macstatus ; - - intstatus = readw(xl_mmio + MMIO_INTSTATUS) ; - - if (!(intstatus & 1)) /* We didn't generate the interrupt */ - return IRQ_NONE; - - spin_lock(&xl_priv->xl_lock) ; - - /* - * Process the interrupt - */ - /* - * Something fishy going on here, we shouldn't get 0001 ints, not fatal though. - */ - if (intstatus == 0x0001) { - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - printk(KERN_INFO "%s: 00001 int received\n",dev->name); - } else { - if (intstatus & (HOSTERRINT | SRBRINT | ARBCINT | UPCOMPINT | DNCOMPINT | HARDERRINT | (1<<8) | TXUNDERRUN | ASBFINT)) { - - /* - * Host Error. - * It may be possible to recover from this, but usually it means something - * is seriously fubar, so we just close the adapter. - */ - - if (intstatus & HOSTERRINT) { - printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x\n",dev->name,intstatus); - writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ; - printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name); - netif_stop_queue(dev) ; - xl_freemem(dev) ; - free_irq(dev->irq,dev); - xl_reset(dev) ; - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - spin_unlock(&xl_priv->xl_lock) ; - return IRQ_HANDLED; - } /* Host Error */ - - if (intstatus & SRBRINT ) { /* Srbc interrupt */ - writel(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - if (xl_priv->srb_queued) - xl_srb_bh(dev) ; - } /* SRBR Interrupt */ - - if (intstatus & TXUNDERRUN) { /* Issue DnReset command */ - writel(DNRESET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { /* Wait for command to run */ - /* !!! FIX-ME !!!! - Must put a timeout check here ! */ - /* Empty Loop */ - } - printk(KERN_WARNING "%s: TX Underrun received\n",dev->name); - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - } /* TxUnderRun */ - - if (intstatus & ARBCINT ) { /* Arbc interrupt */ - xl_arb_cmd(dev) ; - } /* Arbc */ - - if (intstatus & ASBFINT) { - if (xl_priv->asb_queued == 1) { - xl_asb_cmd(dev) ; - } else if (xl_priv->asb_queued == 2) { - xl_asb_bh(dev) ; - } else { - writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ; - } - } /* Asbf */ - - if (intstatus & UPCOMPINT ) /* UpComplete */ - xl_rx(dev) ; - - if (intstatus & DNCOMPINT ) /* DnComplete */ - xl_dn_comp(dev) ; - - if (intstatus & HARDERRINT ) { /* Hardware error */ - writel(MMIO_WORD_READ | MACSTATUS, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - macstatus = readw(xl_mmio + MMIO_MACDATA) ; - printk(KERN_WARNING "%s: MacStatusError, details: ", dev->name); - if (macstatus & (1<<14)) - printk(KERN_WARNING "tchk error: Unrecoverable error\n"); - if (macstatus & (1<<3)) - printk(KERN_WARNING "eint error: Internal watchdog timer expired\n"); - if (macstatus & (1<<2)) - printk(KERN_WARNING "aint error: Host tried to perform invalid operation\n"); - printk(KERN_WARNING "Instatus = %02x, macstatus = %02x\n",intstatus,macstatus) ; - printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name); - netif_stop_queue(dev) ; - xl_freemem(dev) ; - free_irq(dev->irq,dev); - unregister_netdev(dev) ; - free_netdev(dev) ; - xl_reset(dev) ; - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - spin_unlock(&xl_priv->xl_lock) ; - return IRQ_HANDLED; - } - } else { - printk(KERN_WARNING "%s: Received Unknown interrupt : %04x\n", dev->name, intstatus); - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - } - } - - /* Turn interrupts back on */ - - writel( SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - writel( SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - - spin_unlock(&xl_priv->xl_lock) ; - return IRQ_HANDLED; -} - -/* - * Tx - Polling configuration - */ - -static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - struct xl_tx_desc *txd ; - int tx_head, tx_tail, tx_prev ; - unsigned long flags ; - - spin_lock_irqsave(&xl_priv->xl_lock,flags) ; - - netif_stop_queue(dev) ; - - if (xl_priv->free_ring_entries > 1 ) { - /* - * Set up the descriptor for the packet - */ - tx_head = xl_priv->tx_ring_head ; - tx_tail = xl_priv->tx_ring_tail ; - - txd = &(xl_priv->xl_tx_ring[tx_head]) ; - txd->dnnextptr = 0 ; - txd->framestartheader = cpu_to_le32(skb->len) | TXDNINDICATE; - txd->buffer = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); - txd->buffer_length = cpu_to_le32(skb->len) | TXDNFRAGLAST; - xl_priv->tx_ring_skb[tx_head] = skb ; - dev->stats.tx_packets++ ; - dev->stats.tx_bytes += skb->len ; - - /* - * Set the nextptr of the previous descriptor equal to this descriptor, add XL_TX_RING_SIZE -1 - * to ensure no negative numbers in unsigned locations. - */ - - tx_prev = (xl_priv->tx_ring_head + XL_TX_RING_SIZE - 1) & (XL_TX_RING_SIZE - 1) ; - - xl_priv->tx_ring_head++ ; - xl_priv->tx_ring_head &= (XL_TX_RING_SIZE - 1) ; - xl_priv->free_ring_entries-- ; - - xl_priv->xl_tx_ring[tx_prev].dnnextptr = cpu_to_le32(xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head)); - - /* Sneaky, by doing a read on DnListPtr we can force the card to poll on the DnNextPtr */ - /* readl(xl_mmio + MMIO_DNLISTPTR) ; */ - - netif_wake_queue(dev) ; - - spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ; - - return NETDEV_TX_OK; - } else { - spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ; - return NETDEV_TX_BUSY; - } - -} - -/* - * The NIC has told us that a packet has been downloaded onto the card, we must - * find out which packet it has done, clear the skb and information for the packet - * then advance around the ring for all transmitted packets - */ - -static void xl_dn_comp(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - struct xl_tx_desc *txd ; - - - if (xl_priv->tx_ring_tail == 255) {/* First time */ - xl_priv->xl_tx_ring[0].framestartheader = 0 ; - xl_priv->xl_tx_ring[0].dnnextptr = 0 ; - xl_priv->tx_ring_tail = 1 ; - } - - while (xl_priv->xl_tx_ring[xl_priv->tx_ring_tail].framestartheader & TXDNCOMPLETE ) { - txd = &(xl_priv->xl_tx_ring[xl_priv->tx_ring_tail]) ; - pci_unmap_single(xl_priv->pdev, le32_to_cpu(txd->buffer), xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE); - txd->framestartheader = 0 ; - txd->buffer = cpu_to_le32(0xdeadbeef); - txd->buffer_length = 0 ; - dev_kfree_skb_irq(xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]) ; - xl_priv->tx_ring_tail++ ; - xl_priv->tx_ring_tail &= (XL_TX_RING_SIZE - 1) ; - xl_priv->free_ring_entries++ ; - } - - netif_wake_queue(dev) ; - - writel(ACK_INTERRUPT | DNCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; -} - -/* - * Close the adapter properly. - * This srb reply cannot be handled from interrupt context as we have - * to free the interrupt from the driver. - */ - -static int xl_close(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - unsigned long t ; - - netif_stop_queue(dev) ; - - /* - * Close the adapter, need to stall the rx and tx queues. - */ - - writew(DNSTALL, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n", dev->name); - break ; - } - } - writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n", dev->name); - break ; - } - } - writew(UPSTALL, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n", dev->name); - break ; - } - } - - /* Turn off interrupts, we will still get the indication though - * so we can trap it - */ - - writel(SETINTENABLE, xl_mmio + MMIO_COMMAND) ; - - xl_srb_cmd(dev,CLOSE_NIC) ; - - t=jiffies; - while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n", dev->name); - break ; - } - } - /* Read the srb response from the adapter */ - - writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD); - if (readb(xl_mmio + MMIO_MACDATA) != CLOSE_NIC) { - printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response\n",dev->name); - } else { - writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA)==0) { - printk(KERN_INFO "%s: Adapter has been closed\n",dev->name); - writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - xl_freemem(dev) ; - free_irq(dev->irq,dev) ; - } else { - printk(KERN_INFO "%s: Close nic command returned error code %02x\n",dev->name, readb(xl_mmio + MMIO_MACDATA)) ; - } - } - - /* Reset the upload and download logic */ - - writew(UPRESET, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n", dev->name); - break ; - } - } - writew(DNRESET, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n", dev->name); - break ; - } - } - xl_hw_reset(dev) ; - return 0 ; -} - -static void xl_set_rx_mode(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - struct netdev_hw_addr *ha; - unsigned char dev_mc_address[4] ; - u16 options ; - - if (dev->flags & IFF_PROMISC) - options = 0x0004 ; - else - options = 0x0000 ; - - if (options ^ xl_priv->xl_copy_all_options) { /* Changed, must send command */ - xl_priv->xl_copy_all_options = options ; - xl_srb_cmd(dev, SET_RECEIVE_MODE) ; - return ; - } - - dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; - - netdev_for_each_mc_addr(ha, dev) { - dev_mc_address[0] |= ha->addr[2]; - dev_mc_address[1] |= ha->addr[3]; - dev_mc_address[2] |= ha->addr[4]; - dev_mc_address[3] |= ha->addr[5]; - } - - if (memcmp(xl_priv->xl_functional_addr,dev_mc_address,4) != 0) { /* Options have changed, run the command */ - memcpy(xl_priv->xl_functional_addr, dev_mc_address,4) ; - xl_srb_cmd(dev, SET_FUNC_ADDRESS) ; - } - return ; -} - - -/* - * We issued an srb command and now we must read - * the response from the completed command. - */ - -static void xl_srb_bh(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u8 srb_cmd, ret_code ; - int i ; - - writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - srb_cmd = readb(xl_mmio + MMIO_MACDATA) ; - writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - ret_code = readb(xl_mmio + MMIO_MACDATA) ; - - /* Ret_code is standard across all commands */ - - switch (ret_code) { - case 1: - printk(KERN_INFO "%s: Command: %d - Invalid Command code\n",dev->name,srb_cmd) ; - break ; - case 4: - printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command\n",dev->name,srb_cmd); - break ; - - case 6: - printk(KERN_INFO "%s: Command: %d - Options Invalid for command\n",dev->name,srb_cmd); - break ; - - case 0: /* Successful command execution */ - switch (srb_cmd) { - case READ_LOG: /* Returns 14 bytes of data from the NIC */ - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: READ.LOG 14 bytes of data ",dev->name) ; - /* - * We still have to read the log even if message_level = 0 and we don't want - * to see it - */ - for (i=0;i<14;i++) { - writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if(xl_priv->xl_message_level) - printk("%02x:",readb(xl_mmio + MMIO_MACDATA)) ; - } - printk("\n") ; - break ; - case SET_FUNC_ADDRESS: - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: Functional Address Set\n",dev->name); - break ; - case CLOSE_NIC: - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler\n",dev->name); - break ; - case SET_MULTICAST_MODE: - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: Multicast options successfully changed\n",dev->name) ; - break ; - case SET_RECEIVE_MODE: - if(xl_priv->xl_message_level) { - if (xl_priv->xl_copy_all_options == 0x0004) - printk(KERN_INFO "%s: Entering promiscuous mode\n", dev->name); - else - printk(KERN_INFO "%s: Entering normal receive mode\n",dev->name); - } - break ; - - } /* switch */ - break ; - } /* switch */ - return ; -} - -static int xl_set_mac_address (struct net_device *dev, void *addr) -{ - struct sockaddr *saddr = addr ; - struct xl_private *xl_priv = netdev_priv(dev); - - if (netif_running(dev)) { - printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; - return -EIO ; - } - - memcpy(xl_priv->xl_laa, saddr->sa_data,dev->addr_len) ; - - if (xl_priv->xl_message_level) { - printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, xl_priv->xl_laa[0], - xl_priv->xl_laa[1], xl_priv->xl_laa[2], - xl_priv->xl_laa[3], xl_priv->xl_laa[4], - xl_priv->xl_laa[5]); - } - - return 0 ; -} - -static void xl_arb_cmd(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u8 arb_cmd ; - u16 lan_status, lan_status_diff ; - - writel( ( MEM_BYTE_READ | 0xD0000 | xl_priv->arb), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - arb_cmd = readb(xl_mmio + MMIO_MACDATA) ; - - if (arb_cmd == RING_STATUS_CHANGE) { /* Ring.Status.Change */ - writel( ( (MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - - printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, swab16(readw(xl_mmio + MMIO_MACDATA) )) ; - - lan_status = swab16(readw(xl_mmio + MMIO_MACDATA)); - - /* Acknowledge interrupt, this tells nic we are done with the arb */ - writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - lan_status_diff = xl_priv->xl_lan_status ^ lan_status ; - - if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { - if (lan_status_diff & LSC_LWF) - printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); - if (lan_status_diff & LSC_ARW) - printk(KERN_WARNING "%s: Auto removal error\n",dev->name); - if (lan_status_diff & LSC_FPE) - printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); - if (lan_status_diff & LSC_RR) - printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); - - /* Adapter has been closed by the hardware */ - - netif_stop_queue(dev); - xl_freemem(dev) ; - free_irq(dev->irq,dev); - - printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name); - } /* If serious error */ - - if (xl_priv->xl_message_level) { - if (lan_status_diff & LSC_SIG_LOSS) - printk(KERN_WARNING "%s: No receive signal detected\n", dev->name); - if (lan_status_diff & LSC_HARD_ERR) - printk(KERN_INFO "%s: Beaconing\n",dev->name); - if (lan_status_diff & LSC_SOFT_ERR) - printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name); - if (lan_status_diff & LSC_TRAN_BCN) - printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name); - if (lan_status_diff & LSC_SS) - printk(KERN_INFO "%s: Single Station on the ring\n", dev->name); - if (lan_status_diff & LSC_RING_REC) - printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); - if (lan_status_diff & LSC_FDX_MODE) - printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); - } - - if (lan_status_diff & LSC_CO) { - if (xl_priv->xl_message_level) - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - /* Issue READ.LOG command */ - xl_srb_cmd(dev, READ_LOG) ; - } - - /* There is no command in the tech docs to issue the read_sr_counters */ - if (lan_status_diff & LSC_SR_CO) { - if (xl_priv->xl_message_level) - printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); - } - - xl_priv->xl_lan_status = lan_status ; - - } /* Lan.change.status */ - else if ( arb_cmd == RECEIVE_DATA) { /* Received.Data */ -#if XL_DEBUG - printk(KERN_INFO "Received.Data\n"); -#endif - writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->mac_buffer = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - - /* Now we are going to be really basic here and not do anything - * with the data at all. The tech docs do not give me enough - * information to calculate the buffers properly so we're - * just going to tell the nic that we've dealt with the frame - * anyway. - */ - - /* Acknowledge interrupt, this tells nic we are done with the arb */ - writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - /* Is the ASB free ? */ - - xl_priv->asb_queued = 0 ; - writel( ((MEM_BYTE_READ | 0xD0000 | xl_priv->asb) + 2), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA) != 0xff) { - xl_priv->asb_queued = 1 ; - - xl_wait_misr_flags(dev) ; - - writel(MEM_BYTE_WRITE | MF_ASBFR, xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(0xff, xl_mmio + MMIO_MACDATA) ; - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_ASBFR, xl_mmio + MMIO_MACDATA) ; - return ; - /* Drop out and wait for the bottom half to be run */ - } - - xl_asb_cmd(dev) ; - - } else { - printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x\n",dev->name,arb_cmd); - } - - /* Acknowledge the arb interrupt */ - - writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - - return ; -} - - -/* - * There is only one asb command, but we can get called from different - * places. - */ - -static void xl_asb_cmd(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - - if (xl_priv->asb_queued == 1) - writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ; - - writel(MEM_BYTE_WRITE | 0xd0000 | xl_priv->asb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x81, xl_mmio + MMIO_MACDATA) ; - - writel(MEM_WORD_WRITE | 0xd0000 | xl_priv->asb | 6, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(swab16(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ; - - xl_wait_misr_flags(dev) ; - - writel(MEM_BYTE_WRITE | MF_RASB, xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(0xff, xl_mmio + MMIO_MACDATA) ; - - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_RASB, xl_mmio + MMIO_MACDATA) ; - - xl_priv->asb_queued = 2 ; - - return ; -} - -/* - * This will only get called if there was an error - * from the asb cmd. - */ -static void xl_asb_bh(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u8 ret_code ; - - writel(MMIO_BYTE_READ | 0xd0000 | xl_priv->asb | 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - ret_code = readb(xl_mmio + MMIO_MACDATA) ; - switch (ret_code) { - case 0x01: - printk(KERN_INFO "%s: ASB Command, unrecognized command code\n",dev->name); - break ; - case 0x26: - printk(KERN_INFO "%s: ASB Command, unexpected receive buffer\n", dev->name); - break ; - case 0x40: - printk(KERN_INFO "%s: ASB Command, Invalid Station ID\n", dev->name); - break ; - } - xl_priv->asb_queued = 0 ; - writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ; - return ; -} - -/* - * Issue srb commands to the nic - */ - -static void xl_srb_cmd(struct net_device *dev, int srb_cmd) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - - switch (srb_cmd) { - case READ_LOG: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(READ_LOG, xl_mmio + MMIO_MACDATA) ; - break; - - case CLOSE_NIC: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(CLOSE_NIC, xl_mmio + MMIO_MACDATA) ; - break ; - - case SET_RECEIVE_MODE: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(SET_RECEIVE_MODE, xl_mmio + MMIO_MACDATA) ; - writel(MEM_WORD_WRITE | 0xD0000 | xl_priv->srb | 4, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(xl_priv->xl_copy_all_options, xl_mmio + MMIO_MACDATA) ; - break ; - - case SET_FUNC_ADDRESS: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(SET_FUNC_ADDRESS, xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 6 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[0], xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 7 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[1], xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 8 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[2], xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 9 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[3], xl_mmio + MMIO_MACDATA) ; - break ; - } /* switch */ - - - xl_wait_misr_flags(dev) ; - - /* Write 0xff to the CSRB flag */ - writel(MEM_BYTE_WRITE | MF_CSRB , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0xFF, xl_mmio + MMIO_MACDATA) ; - /* Set csrb bit in MISR register to process command */ - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_CSRB, xl_mmio + MMIO_MACDATA) ; - xl_priv->srb_queued = 1 ; - - return ; -} - -/* - * This is nasty, to use the MISR command you have to wait for 6 memory locations - * to be zero. This is the way the driver does on other OS'es so we should be ok with - * the empty loop. - */ - -static void xl_wait_misr_flags(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - - int i ; - - writel(MMIO_BYTE_READ | MISR_RW, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA) != 0) { /* Misr not clear */ - for (i=0; i<6; i++) { - writel(MEM_BYTE_READ | 0xDFFE0 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while (readb(xl_mmio + MMIO_MACDATA) != 0) { - ; /* Empty Loop */ - } - } - } - - writel(MMIO_BYTE_WRITE | MISR_AND, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x80, xl_mmio + MMIO_MACDATA) ; - - return ; -} - -/* - * Change mtu size, this should work the same as olympic - */ - -static int xl_change_mtu(struct net_device *dev, int mtu) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u16 max_mtu ; - - if (xl_priv->xl_ring_speed == 4) - max_mtu = 4500 ; - else - max_mtu = 18000 ; - - if (mtu > max_mtu) - return -EINVAL ; - if (mtu < 100) - return -EINVAL ; - - dev->mtu = mtu ; - xl_priv->pkt_buf_sz = mtu + TR_HLEN ; - - return 0 ; -} - -static void __devexit xl_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xl_private *xl_priv=netdev_priv(dev); - - release_firmware(xl_priv->fw); - unregister_netdev(dev); - iounmap(xl_priv->xl_mmio) ; - pci_release_regions(pdev) ; - pci_set_drvdata(pdev,NULL) ; - free_netdev(dev); - return ; -} - -static struct pci_driver xl_3c359_driver = { - .name = "3c359", - .id_table = xl_pci_tbl, - .probe = xl_probe, - .remove = __devexit_p(xl_remove_one), -}; - -module_pci_driver(xl_3c359_driver); - -MODULE_LICENSE("GPL") ; |