summaryrefslogtreecommitdiff
path: root/drivers/net/sky2.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sky2.h')
-rw-r--r--drivers/net/sky2.h16
1 files changed, 11 insertions, 5 deletions
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 318c9ae7bf91..0af31b8b5f10 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -412,7 +412,7 @@ enum {
Y2_IS_HW_ERR = 1<<31, /* Interrupt HW Error */
Y2_IS_STAT_BMU = 1<<30, /* Status BMU Interrupt */
Y2_IS_ASF = 1<<29, /* ASF subsystem Interrupt */
-
+ Y2_IS_CPU_TO = 1<<28, /* CPU Timeout */
Y2_IS_POLL_CHK = 1<<27, /* Check IRQ from polling unit */
Y2_IS_TWSI_RDY = 1<<26, /* IRQ on end of TWSI Tx */
Y2_IS_IRQ_SW = 1<<25, /* SW forced IRQ */
@@ -547,6 +547,8 @@ enum {
CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
CHIP_ID_YUKON_OPT = 0xbc, /* YUKON-2 Optima */
+ CHIP_ID_YUKON_PRM = 0xbd, /* YUKON-2 Optima Prime */
+ CHIP_ID_YUKON_OP_2 = 0xbe, /* YUKON-2 Optima 2 */
};
enum yukon_xl_rev {
@@ -1420,8 +1422,10 @@ enum {
PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */
PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */
PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */
- PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */};
+ PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */
+ PHY_M_10B_TE_ENABLE = 1<<7, /* 10Base-Te Enable (88E8079 and above) */
+};
#define PHY_M_EC_M_DSC(x) ((u16)(x)<<10 & PHY_M_EC_M_DSC_MSK)
/* 00=1x; 01=2x; 10=3x; 11=4x */
#define PHY_M_EC_S_DSC(x) ((u16)(x)<<8 & PHY_M_EC_S_DSC_MSK)
@@ -1807,10 +1811,11 @@ enum {
};
#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK)
-#define DATA_BLIND_DEF 0x04
-
#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK)
-#define IPG_DATA_DEF 0x1e
+
+#define DATA_BLIND_DEF 0x04
+#define IPG_DATA_DEF_1000 0x1e
+#define IPG_DATA_DEF_10_100 0x18
/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
enum {
@@ -2281,6 +2286,7 @@ struct sky2_hw {
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
#define SKY2_HW_RSS_BROKEN 0x00000100
#define SKY2_HW_VLAN_BROKEN 0x00000200
+#define SKY2_HW_RSS_CHKSUM 0x00000400 /* RSS requires chksum */
u8 chip_id;
u8 chip_rev;