summaryrefslogtreecommitdiff
path: root/drivers/net/sky2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r--drivers/net/sky2.c161
1 files changed, 107 insertions, 54 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 6b5946fe8ae2..7681d28c53d7 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.22"
+#define DRV_VERSION "1.23"
#define PFX DRV_NAME " "
/*
@@ -65,9 +65,9 @@
#define RX_DEF_PENDING RX_MAX_PENDING
#define TX_RING_SIZE 512
-#define TX_DEF_PENDING (TX_RING_SIZE - 1)
-#define TX_MIN_PENDING 64
+#define TX_DEF_PENDING 128
#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
+#define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
@@ -1151,7 +1151,14 @@ stopped:
/* reset the Rx prefetch unit */
sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
- mmiowb();
+
+ /* Reset the RAM Buffer receive queue */
+ sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET);
+
+ /* Reset Rx MAC FIFO */
+ sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+ sky2_read8(hw, B0_CTST);
}
/* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -1169,6 +1176,7 @@ static void sky2_rx_clean(struct sky2_port *sky2)
re->skb = NULL;
}
}
+ skb_queue_purge(&sky2->rx_recycle);
}
/* Basic MII support */
@@ -1245,6 +1253,12 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp
}
#endif
+/* Amount of required worst case padding in rx buffer */
+static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
+{
+ return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
+}
+
/*
* Allocate an skb for receiving. If the MTU is large enough
* make the skb non-linear with a fragment list of pages.
@@ -1254,6 +1268,13 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
struct sk_buff *skb;
int i;
+ skb = __skb_dequeue(&sky2->rx_recycle);
+ if (!skb)
+ skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size
+ + sky2_rx_pad(sky2->hw));
+ if (!skb)
+ goto nomem;
+
if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
unsigned char *start;
/*
@@ -1262,18 +1283,10 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
* The buffer returned from netdev_alloc_skb is
* aligned except if slab debugging is enabled.
*/
- skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + 8);
- if (!skb)
- goto nomem;
start = PTR_ALIGN(skb->data, 8);
skb_reserve(skb, start - skb->data);
- } else {
- skb = netdev_alloc_skb(sky2->netdev,
- sky2->rx_data_size + NET_IP_ALIGN);
- if (!skb)
- goto nomem;
+ } else
skb_reserve(skb, NET_IP_ALIGN);
- }
for (i = 0; i < sky2->rx_nfrags; i++) {
struct page *page = alloc_page(GFP_ATOMIC);
@@ -1350,6 +1363,8 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2->rx_data_size = size;
+ skb_queue_head_init(&sky2->rx_recycle);
+
/* Fill Rx ring */
for (i = 0; i < sky2->rx_pending; i++) {
re = sky2->rx_ring + i;
@@ -1488,6 +1503,7 @@ static int sky2_up(struct net_device *dev)
imask = sky2_read32(hw, B0_IMSK);
imask |= portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
sky2_set_multicast(dev);
@@ -1756,14 +1772,22 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
}
if (le->ctrl & EOP) {
+ struct sk_buff *skb = re->skb;
+
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
dev->stats.tx_packets++;
- dev->stats.tx_bytes += re->skb->len;
+ dev->stats.tx_bytes += skb->len;
+
+ if (skb_queue_len(&sky2->rx_recycle) < sky2->rx_pending
+ && skb_recycle_check(skb, sky2->rx_data_size
+ + sky2_rx_pad(sky2->hw)))
+ __skb_queue_head(&sky2->rx_recycle, skb);
+ else
+ dev_kfree_skb_any(skb);
- dev_kfree_skb_any(re->skb);
sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
}
}
@@ -1805,10 +1829,10 @@ static int sky2_down(struct net_device *dev)
imask = sky2_read32(hw, B0_IMSK);
imask &= ~portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
- synchronize_irq(hw->pdev->irq);
-
- sky2_gmac_reset(hw, port);
+ /* Force flow control off */
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
/* Stop transmitter */
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
@@ -1821,9 +1845,6 @@ static int sky2_down(struct net_device *dev)
ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
gma_write16(hw, port, GM_GP_CTRL, ctrl);
- /* Make sure no packets are pending */
- napi_synchronize(&hw->napi);
-
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
/* Workaround shared GMAC reset */
@@ -1854,6 +1875,15 @@ static int sky2_down(struct net_device *dev)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+ /* Force any delayed status interrrupt and NAPI */
+ sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
+ sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
+ sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
+ sky2_read8(hw, STAT_ISR_TIMER_CTRL);
+
+ synchronize_irq(hw->pdev->irq);
+ napi_synchronize(&hw->napi);
+
sky2_phy_power_down(hw, port);
/* turn off LED's */
@@ -2343,11 +2373,45 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
}
}
+static inline void sky2_skb_rx(const struct sky2_port *sky2,
+ u32 status, struct sk_buff *skb)
+{
+#ifdef SKY2_VLAN_TAG_USED
+ u16 vlan_tag = be16_to_cpu(sky2->rx_tag);
+ if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
+ if (skb->ip_summed == CHECKSUM_NONE)
+ vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag);
+ else
+ vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp,
+ vlan_tag, skb);
+ return;
+ }
+#endif
+ if (skb->ip_summed == CHECKSUM_NONE)
+ netif_receive_skb(skb);
+ else
+ napi_gro_receive(&sky2->hw->napi, skb);
+}
+
+static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
+ unsigned packets, unsigned bytes)
+{
+ if (packets) {
+ struct net_device *dev = hw->dev[port];
+
+ dev->stats.rx_packets += packets;
+ dev->stats.rx_bytes += bytes;
+ dev->last_rx = jiffies;
+ sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
+ }
+}
+
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
{
int work_done = 0;
- unsigned rx[2] = { 0, 0 };
+ unsigned int total_bytes[2] = { 0 };
+ unsigned int total_packets[2] = { 0 };
rmb();
do {
@@ -2374,7 +2438,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
le->opcode = 0;
switch (opcode & ~HW_OWNER) {
case OP_RXSTAT:
- ++rx[port];
+ total_packets[port]++;
+ total_bytes[port] += length;
skb = sky2_receive(dev, length, status);
if (unlikely(!skb)) {
dev->stats.rx_dropped++;
@@ -2392,18 +2457,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
}
skb->protocol = eth_type_trans(skb, dev);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
- dev->last_rx = jiffies;
-#ifdef SKY2_VLAN_TAG_USED
- if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
- vlan_hwaccel_receive_skb(skb,
- sky2->vlgrp,
- be16_to_cpu(sky2->rx_tag));
- } else
-#endif
- netif_receive_skb(skb);
+ sky2_skb_rx(sky2, status, skb);
/* Stop after net poll weight */
if (++work_done >= to_do)
@@ -2473,11 +2528,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
exit_loop:
- if (rx[0])
- sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
-
- if (rx[1])
- sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
+ sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
+ sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
return work_done;
}
@@ -4364,6 +4416,22 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out;
}
+ /* Get configuration information
+ * Note: only regular PCI config access once to test for HW issues
+ * other PCI access through shared memory for speed and to
+ * avoid MMCONFIG problems.
+ */
+ err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
+ if (err) {
+ dev_err(&pdev->dev, "PCI read config failed\n");
+ goto err_out;
+ }
+
+ if (~reg == 0) {
+ dev_err(&pdev->dev, "PCI configuration read error\n");
+ goto err_out;
+ }
+
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@@ -4389,21 +4457,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
}
}
- /* Get configuration information
- * Note: only regular PCI config access once to test for HW issues
- * other PCI access through shared memory for speed and to
- * avoid MMCONFIG problems.
- */
- err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
- if (err) {
- dev_err(&pdev->dev, "PCI read config failed\n");
- goto err_out_free_regions;
- }
-
- /* size of available VPD, only impact sysfs */
- err = pci_vpd_truncate(pdev, 1ul << (((reg & PCI_VPD_ROM_SZ) >> 14) + 8));
- if (err)
- dev_warn(&pdev->dev, "Can't set VPD size\n");
#ifdef __BIG_ENDIAN
/* The sk98lin vendor driver uses hardware byte swapping but
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 18:41:11 +0300