diff options
Diffstat (limited to 'drivers/net/sk98lin/skgeinit.c')
| -rw-r--r-- | drivers/net/sk98lin/skgeinit.c | 148 |
1 files changed, 1 insertions, 147 deletions
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c index 6cb49dd02251..67f1d6a5c15d 100644 --- a/drivers/net/sk98lin/skgeinit.c +++ b/drivers/net/sk98lin/skgeinit.c @@ -59,34 +59,6 @@ static struct s_Config OemConfig = { /****************************************************************************** * - * SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring - * - * Description: - * Enable or disable the descriptor polling of the receive descriptor - * ring (RxD) for port 'Port'. - * The new configuration is *not* saved over any SkGeStopPort() and - * SkGeInitPort() calls. - * - * Returns: - * nothing - */ -void SkGePollRxD( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL PollRxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */ -{ - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ? - CSR_ENA_POL : CSR_DIS_POL); -} /* SkGePollRxD */ - - -/****************************************************************************** - * * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings * * Description: @@ -952,7 +924,7 @@ int Port) /* Port Index (MAC_1 + n) */ * Returns: * nothing */ -void SkGeInitRamIface( +static void SkGeInitRamIface( SK_AC *pAC, /* adapter context */ SK_IOC IoC) /* IO context */ { @@ -1409,83 +1381,6 @@ SK_IOC IoC) /* IO context */ } /* SkGeInit0*/ -#ifdef SK_PCI_RESET - -/****************************************************************************** - * - * SkGePciReset() - Reset PCI interface - * - * Description: - * o Read PCI configuration. - * o Change power state to 3. - * o Change power state to 0. - * o Restore PCI configuration. - * - * Returns: - * 0: Success. - * 1: Power state could not be changed to 3. - */ -static int SkGePciReset( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - int i; - SK_U16 PmCtlSts; - SK_U32 Bp1; - SK_U32 Bp2; - SK_U16 PciCmd; - SK_U8 Cls; - SK_U8 Lat; - SK_U8 ConfigSpace[PCI_CFG_SIZE]; - - /* - * Note: Switching to D3 state is like a software reset. - * Switching from D3 to D0 is a hardware reset. - * We have to save and restore the configuration space. - */ - for (i = 0; i < PCI_CFG_SIZE; i++) { - SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]); - } - - /* We know the RAM Interface Arbiter is enabled. */ - SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3); - SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts); - - if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) { - return(1); - } - - /* Return to D0 state. */ - SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0); - - /* Check for D0 state. */ - SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts); - - if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) { - return(1); - } - - /* Check PCI Config Registers. */ - SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd); - SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls); - SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1); - SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2); - SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat); - - if (PciCmd != 0 || Cls != (SK_U8)0 || Lat != (SK_U8)0 || - (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1) { - return(1); - } - - /* Restore PCI Config Space. */ - for (i = 0; i < PCI_CFG_SIZE; i++) { - SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]); - } - - return(0); -} /* SkGePciReset */ - -#endif /* SK_PCI_RESET */ /****************************************************************************** * @@ -1524,10 +1419,6 @@ SK_IOC IoC) /* IO context */ /* save CLK_RUN bits (YUKON-Lite) */ SK_IN16(IoC, B0_CTST, &CtrlStat); -#ifdef SK_PCI_RESET - (void)SkGePciReset(pAC, IoC); -#endif /* SK_PCI_RESET */ - /* do the SW-reset */ SK_OUT8(IoC, B0_CTST, CS_RST_SET); @@ -1991,11 +1882,6 @@ SK_IOC IoC) /* IO context */ int i; SK_U16 Word; -#ifdef SK_PHY_LP_MODE - SK_U8 Byte; - SK_U16 PmCtlSts; -#endif /* SK_PHY_LP_MODE */ - #if (!defined(SK_SLIM) && !defined(VCPU)) /* ensure I2C is ready */ SkI2cWaitIrq(pAC, IoC); @@ -2010,38 +1896,6 @@ SK_IOC IoC) /* IO context */ } } -#ifdef SK_PHY_LP_MODE - /* - * for power saving purposes within mobile environments - * we set the PHY to coma mode and switch to D3 power state. - */ - if (pAC->GIni.GIYukonLite && - pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { - - /* for all ports switch PHY to coma mode */ - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - - SkGmEnterLowPowerMode(pAC, IoC, i, PHY_PM_DEEP_SLEEP); - } - - if (pAC->GIni.GIVauxAvail) { - /* switch power to VAUX */ - Byte = PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF; - - SK_OUT8(IoC, B0_POWER_CTRL, Byte); - } - - /* switch to D3 state */ - SK_IN16(IoC, PCI_C(PCI_PM_CTL_STS), &PmCtlSts); - - PmCtlSts |= PCI_PM_STATE_D3; - - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); - - SK_OUT16(IoC, PCI_C(PCI_PM_CTL_STS), PmCtlSts); - } -#endif /* SK_PHY_LP_MODE */ - /* Reset all bits in the PCI STATUS register */ /* * Note: PCI Cfg cycles cannot be used, because they are not |