diff options
Diffstat (limited to 'drivers/net/sfc')
-rw-r--r-- | drivers/net/sfc/efx.c | 8 | ||||
-rw-r--r-- | drivers/net/sfc/efx.h | 2 | ||||
-rw-r--r-- | drivers/net/sfc/ethtool.c | 10 | ||||
-rw-r--r-- | drivers/net/sfc/falcon.c | 6 | ||||
-rw-r--r-- | drivers/net/sfc/falcon_boards.c | 45 | ||||
-rw-r--r-- | drivers/net/sfc/mcdi.c | 111 | ||||
-rw-r--r-- | drivers/net/sfc/mcdi.h | 1 | ||||
-rw-r--r-- | drivers/net/sfc/mcdi_pcol.h | 202 | ||||
-rw-r--r-- | drivers/net/sfc/mcdi_phy.c | 36 | ||||
-rw-r--r-- | drivers/net/sfc/mdio_10g.c | 24 | ||||
-rw-r--r-- | drivers/net/sfc/mdio_10g.h | 3 | ||||
-rw-r--r-- | drivers/net/sfc/net_driver.h | 17 | ||||
-rw-r--r-- | drivers/net/sfc/nic.c | 13 | ||||
-rw-r--r-- | drivers/net/sfc/qt202x_phy.c | 1 | ||||
-rw-r--r-- | drivers/net/sfc/selftest.c | 42 | ||||
-rw-r--r-- | drivers/net/sfc/selftest.h | 4 | ||||
-rw-r--r-- | drivers/net/sfc/siena.c | 16 | ||||
-rw-r--r-- | drivers/net/sfc/tenxpress.c | 2 |
18 files changed, 402 insertions, 141 deletions
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 46997e177ee3..88f2fb193abe 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1602,11 +1602,10 @@ static int efx_set_mac_address(struct net_device *net_dev, void *data) static void efx_set_multicast_list(struct net_device *net_dev) { struct efx_nic *efx = netdev_priv(net_dev); - struct dev_mc_list *mc_list = net_dev->mc_list; + struct dev_mc_list *mc_list; union efx_multicast_hash *mc_hash = &efx->multicast_hash; u32 crc; int bit; - int i; efx->promiscuous = !!(net_dev->flags & IFF_PROMISC); @@ -1615,11 +1614,10 @@ static void efx_set_multicast_list(struct net_device *net_dev) memset(mc_hash, 0xff, sizeof(*mc_hash)); } else { memset(mc_hash, 0x00, sizeof(*mc_hash)); - for (i = 0; i < net_dev->mc_count; i++) { + netdev_for_each_mc_addr(mc_list, net_dev) { crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr); bit = crc & (EFX_MCAST_HASH_ENTRIES - 1); set_bit_le(bit, mc_hash->byte); - mc_list = mc_list->next; } /* Broadcast packets go through the multicast hash filter. @@ -1940,7 +1938,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) **************************************************************************/ /* PCI device ID table */ -static struct pci_device_id efx_pci_table[] __devinitdata = { +static DEFINE_PCI_DEVICE_TABLE(efx_pci_table) = { {PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID), .driver_data = (unsigned long) &falcon_a1_nic_type}, {PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID), diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index a615ac051530..7eff0a615cb3 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -79,8 +79,6 @@ extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok); /* Global */ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); -extern void efx_suspend(struct efx_nic *efx); -extern void efx_resume(struct efx_nic *efx); extern void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs, bool rx_adaptive); extern int efx_request_power(struct efx_nic *efx, int mw, const char *name); diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 6c0bbed8c477..d9f9c02a928e 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -196,7 +196,7 @@ int efx_ethtool_get_settings(struct net_device *net_dev, efx->phy_op->get_settings(efx, ecmd); mutex_unlock(&efx->mac_lock); - /* Falcon GMAC does not support 1000Mbps HD */ + /* GMAC does not support 1000Mbps HD */ ecmd->supported &= ~SUPPORTED_1000baseT_Half; /* Both MACs support pause frames (bidirectional and respond-only) */ ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; @@ -216,7 +216,7 @@ int efx_ethtool_set_settings(struct net_device *net_dev, struct efx_nic *efx = netdev_priv(net_dev); int rc; - /* Falcon GMAC does not support 1000Mbps HD */ + /* GMAC does not support 1000Mbps HD */ if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) { EFX_LOG(efx, "rejecting unsupported 1000Mbps HD" " setting\n"); @@ -342,8 +342,8 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx, unsigned int n = 0, i; enum efx_loopback_mode mode; - efx_fill_test(n++, strings, data, &tests->mdio, - "core", 0, "mdio", NULL); + efx_fill_test(n++, strings, data, &tests->phy_alive, + "phy", 0, "alive", NULL); efx_fill_test(n++, strings, data, &tests->nvram, "core", 0, "nvram", NULL); efx_fill_test(n++, strings, data, &tests->interrupt, @@ -379,7 +379,7 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx, if (name == NULL) break; - efx_fill_test(n++, strings, data, &tests->phy[i], + efx_fill_test(n++, strings, data, &tests->phy_ext[i], "phy", 0, name, NULL); } } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 9d009c46e962..1b8d83657aaa 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -909,6 +909,8 @@ static int falcon_probe_port(struct efx_nic *efx) efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; else efx->wanted_fc = EFX_FC_RX; + if (efx->mdio.mmds & MDIO_DEVS_AN) + efx->wanted_fc |= EFX_FC_AUTO; /* Allocate buffer for stats */ rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, @@ -1006,7 +1008,7 @@ static int falcon_test_nvram(struct efx_nic *efx) static const struct efx_nic_register_test falcon_b0_register_tests[] = { { FR_AZ_ADR_REGION, - EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) }, + EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) }, { FR_AZ_RX_CFG, EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) }, { FR_AZ_TX_CFG, @@ -1728,7 +1730,7 @@ static int falcon_set_wol(struct efx_nic *efx, u32 type) /************************************************************************** * - * Revision-dependent attributes used by efx.c + * Revision-dependent attributes used by efx.c and nic.c * ************************************************************************** */ diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c index bf0b96af5334..5712fddd72f2 100644 --- a/drivers/net/sfc/falcon_boards.c +++ b/drivers/net/sfc/falcon_boards.c @@ -29,6 +29,15 @@ #define FALCON_BOARD_SFN4111T 0x51 #define FALCON_BOARD_SFN4112F 0x52 +/* Board temperature is about 15°C above ambient when air flow is + * limited. */ +#define FALCON_BOARD_TEMP_BIAS 15 + +/* SFC4000 datasheet says: 'The maximum permitted junction temperature + * is 125°C; the thermal design of the environment for the SFC4000 + * should aim to keep this well below 100°C.' */ +#define FALCON_JUNC_TEMP_MAX 90 + /***************************************************************************** * Support for LM87 sensor chip used on several boards */ @@ -548,16 +557,16 @@ fail_hwmon: static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */ static const u8 sfe4002_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */ + LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */ + LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */ + LM87_IN_LIMITS(3, 0xac, 0xd4), /* 5V: 5.0V +/- 10% */ + LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */ + LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */ + LM87_AIN_LIMITS(0, 0x98, 0xbb), /* AIN1: 1.66V +/- 10% */ + LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */ + LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS), + LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX), 0 }; @@ -619,14 +628,14 @@ static int sfe4002_init(struct efx_nic *efx) static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */ static const u8 sfn4112f_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */ + LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */ + LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */ + LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */ + LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */ + LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */ + LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS), + LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX), 0 }; diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 9f035b9f0350..c48669c77414 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -127,7 +127,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) efx_dword_t reg; /* Check for a reboot atomically with respect to efx_mcdi_copyout() */ - rc = efx_mcdi_poll_reboot(efx); + rc = -efx_mcdi_poll_reboot(efx); if (rc) goto out; @@ -896,29 +896,73 @@ fail: return rc; } -int efx_mcdi_handle_assertion(struct efx_nic *efx) +static int efx_mcdi_nvram_test(struct efx_nic *efx, unsigned int type) +{ + u8 inbuf[MC_CMD_NVRAM_TEST_IN_LEN]; + u8 outbuf[MC_CMD_NVRAM_TEST_OUT_LEN]; + int rc; + + MCDI_SET_DWORD(inbuf, NVRAM_TEST_IN_TYPE, type); + + rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_TEST, inbuf, sizeof(inbuf), + outbuf, sizeof(outbuf), NULL); + if (rc) + return rc; + + switch (MCDI_DWORD(outbuf, NVRAM_TEST_OUT_RESULT)) { + case MC_CMD_NVRAM_TEST_PASS: + case MC_CMD_NVRAM_TEST_NOTSUPP: + return 0; + default: + return -EIO; + } +} + +int efx_mcdi_nvram_test_all(struct efx_nic *efx) +{ + u32 nvram_types; + unsigned int type; + int rc; + + rc = efx_mcdi_nvram_types(efx, &nvram_types); + if (rc) + return rc; + + type = 0; + while (nvram_types != 0) { + if (nvram_types & 1) { + rc = efx_mcdi_nvram_test(efx, type); + if (rc) + return rc; + } + type++; + nvram_types >>= 1; + } + + return 0; +} + +static int efx_mcdi_read_assertion(struct efx_nic *efx) { - union { - u8 asserts[MC_CMD_GET_ASSERTS_IN_LEN]; - u8 reboot[MC_CMD_REBOOT_IN_LEN]; - } inbuf; - u8 assertion[MC_CMD_GET_ASSERTS_OUT_LEN]; + u8 inbuf[MC_CMD_GET_ASSERTS_IN_LEN]; + u8 outbuf[MC_CMD_GET_ASSERTS_OUT_LEN]; unsigned int flags, index, ofst; const char *reason; size_t outlen; int retry; int rc; - /* Check if the MC is in the assertion handler, retrying twice. Once + /* Attempt to read any stored assertion state before we reboot + * the mcfw out of the assertion handler. Retry twice, once * because a boot-time assertion might cause this command to fail * with EINTR. And once again because GET_ASSERTS can race with * MC_CMD_REBOOT running on the other port. */ retry = 2; do { - MCDI_SET_DWORD(inbuf.asserts, GET_ASSERTS_IN_CLEAR, 0); + MCDI_SET_DWORD(inbuf, GET_ASSERTS_IN_CLEAR, 1); rc = efx_mcdi_rpc(efx, MC_CMD_GET_ASSERTS, - inbuf.asserts, MC_CMD_GET_ASSERTS_IN_LEN, - assertion, sizeof(assertion), &outlen); + inbuf, MC_CMD_GET_ASSERTS_IN_LEN, + outbuf, sizeof(outbuf), &outlen); } while ((rc == -EINTR || rc == -EIO) && retry-- > 0); if (rc) @@ -926,21 +970,11 @@ int efx_mcdi_handle_assertion(struct efx_nic *efx) if (outlen < MC_CMD_GET_ASSERTS_OUT_LEN) return -EINVAL; - flags = MCDI_DWORD(assertion, GET_ASSERTS_OUT_GLOBAL_FLAGS); + /* Print out any recorded assertion state */ + flags = MCDI_DWORD(outbuf, GET_ASSERTS_OUT_GLOBAL_FLAGS); if (flags == MC_CMD_GET_ASSERTS_FLAGS_NO_FAILS) return 0; - /* Reset the hardware atomically such that only one port with succeed. - * This command will succeed if a reboot is no longer required (because - * the other port did it first), but fail with EIO if it succeeds. - */ - BUILD_BUG_ON(MC_CMD_REBOOT_OUT_LEN != 0); - MCDI_SET_DWORD(inbuf.reboot, REBOOT_IN_FLAGS, - MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION); - efx_mcdi_rpc(efx, MC_CMD_REBOOT, inbuf.reboot, MC_CMD_REBOOT_IN_LEN, - NULL, 0, NULL); - - /* Print out the assertion */ reason = (flags == MC_CMD_GET_ASSERTS_FLAGS_SYS_FAIL) ? "system-level assertion" : (flags == MC_CMD_GET_ASSERTS_FLAGS_THR_FAIL) @@ -949,20 +983,45 @@ int efx_mcdi_handle_assertion(struct efx_nic *efx) ? "watchdog reset" : "unknown assertion"; EFX_ERR(efx, "MCPU %s at PC = 0x%.8x in thread 0x%.8x\n", reason, - MCDI_DWORD(assertion, GET_ASSERTS_OUT_SAVED_PC_OFFS), - MCDI_DWORD(assertion, GET_ASSERTS_OUT_THREAD_OFFS)); + MCDI_DWORD(outbuf, GET_ASSERTS_OUT_SAVED_PC_OFFS), + MCDI_DWORD(outbuf, GET_ASSERTS_OUT_THREAD_OFFS)); /* Print out the registers */ ofst = MC_CMD_GET_ASSERTS_OUT_GP_REGS_OFFS_OFST; for (index = 1; index < 32; index++) { EFX_ERR(efx, "R%.2d (?): 0x%.8x\n", index, - MCDI_DWORD2(assertion, ofst)); + MCDI_DWORD2(outbuf, ofst)); ofst += sizeof(efx_dword_t); } return 0; } +static void efx_mcdi_exit_assertion(struct efx_nic *efx) +{ + u8 inbuf[MC_CMD_REBOOT_IN_LEN]; + + /* Atomically reboot the mcfw out of the assertion handler */ + BUILD_BUG_ON(MC_CMD_REBOOT_OUT_LEN != 0); + MCDI_SET_DWORD(inbuf, REBOOT_IN_FLAGS, + MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION); + efx_mcdi_rpc(efx, MC_CMD_REBOOT, inbuf, MC_CMD_REBOOT_IN_LEN, + NULL, 0, NULL); +} + +int efx_mcdi_handle_assertion(struct efx_nic *efx) +{ + int rc; + + rc = efx_mcdi_read_assertion(efx); + if (rc) + return rc; + + efx_mcdi_exit_assertion(efx); + + return 0; +} + void efx_mcdi_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) { u8 inbuf[MC_CMD_SET_ID_LED_IN_LEN]; diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/sfc/mcdi.h index 10ce98f4c0fb..f1f89ad4075a 100644 --- a/drivers/net/sfc/mcdi.h +++ b/drivers/net/sfc/mcdi.h @@ -116,6 +116,7 @@ extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type, loff_t offset, size_t length); extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx, unsigned int type); +extern int efx_mcdi_nvram_test_all(struct efx_nic *efx); extern int efx_mcdi_handle_assertion(struct efx_nic *efx); extern void efx_mcdi_set_id_led(struct efx_nic *efx, enum efx_led_mode mode); extern int efx_mcdi_reset_port(struct efx_nic *efx); diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h index 73e71f420624..bd59302695b3 100644 --- a/drivers/net/sfc/mcdi_pcol.h +++ b/drivers/net/sfc/mcdi_pcol.h @@ -786,16 +786,18 @@ #define MC_CMD_GET_PHY_CFG_OUT_FLAGS_OFST 0 #define MC_CMD_GET_PHY_CFG_PRESENT_LBN 0 #define MC_CMD_GET_PHY_CFG_PRESENT_WIDTH 1 -#define MC_CMD_GET_PHY_CFG_SHORTBIST_LBN 1 -#define MC_CMD_GET_PHY_CFG_SHORTBIST_WIDTH 1 -#define MC_CMD_GET_PHY_CFG_LONGBIST_LBN 2 -#define MC_CMD_GET_PHY_CFG_LONGBIST_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_LBN 1 +#define MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_LBN 2 +#define MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_WIDTH 1 #define MC_CMD_GET_PHY_CFG_LOWPOWER_LBN 3 #define MC_CMD_GET_PHY_CFG_LOWPOWER_WIDTH 1 #define MC_CMD_GET_PHY_CFG_POWEROFF_LBN 4 #define MC_CMD_GET_PHY_CFG_POWEROFF_WIDTH 1 #define MC_CMD_GET_PHY_CFG_TXDIS_LBN 5 #define MC_CMD_GET_PHY_CFG_TXDIS_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_BIST_LBN 6 +#define MC_CMD_GET_PHY_CFG_BIST_WIDTH 1 #define MC_CMD_GET_PHY_CFG_OUT_TYPE_OFST 4 /* Bitmask of supported capabilities */ #define MC_CMD_GET_PHY_CFG_OUT_SUPPORTED_CAP_OFST 8 @@ -832,7 +834,7 @@ #define MC_CMD_GET_PHY_CFG_OUT_REVISION_OFST 52 #define MC_CMD_GET_PHY_CFG_OUT_REVISION_LEN 20 -/* MC_CMD_START_PHY_BIST: +/* MC_CMD_START_BIST: * Start a BIST test on the PHY. * * Locks required: PHY_LOCK if doing a PHY BIST @@ -840,34 +842,71 @@ */ #define MC_CMD_START_BIST 0x25 #define MC_CMD_START_BIST_IN_LEN 4 -#define MC_CMD_START_BIST_TYPE_OFST 0 +#define MC_CMD_START_BIST_IN_TYPE_OFST 0 +#define MC_CMD_START_BIST_OUT_LEN 0 -/* Run the PHY's short BIST */ -#define MC_CMD_PHY_BIST_SHORT 1 -/* Run the PHY's long BIST */ -#define MC_CMD_PHY_BIST_LONG 2 +/* Run the PHY's short cable BIST */ +#define MC_CMD_PHY_BIST_CABLE_SHORT 1 +/* Run the PHY's long cable BIST */ +#define MC_CMD_PHY_BIST_CABLE_LONG 2 /* Run BIST on the currently selected BPX Serdes (XAUI or XFI) */ #define MC_CMD_BPX_SERDES_BIST 3 +/* Run the MC loopback tests */ +#define MC_CMD_MC_LOOPBACK_BIST 4 +/* Run the PHY's standard BIST */ +#define MC_CMD_PHY_BIST 5 /* MC_CMD_POLL_PHY_BIST: (variadic output) * Poll for BIST completion * - * Returns a single status code, and a binary blob of phy-specific - * bist output. If the driver can't succesfully parse the BIST output, - * it should still respect the Pass/Fail in OUT.RESULT. + * Returns a single status code, and optionally some PHY specific + * bist output. The driver should only consume the BIST output + * after validating OUTLEN and PHY_CFG.PHY_TYPE. * - * Locks required: PHY_LOCK if doing a PHY BIST + * If a driver can't succesfully parse the BIST output, it should + * still respect the pass/Fail in OUT.RESULT + * + * Locks required: PHY_LOCK if doing a PHY BIST * Return code: 0, EACCES (if PHY_LOCK is not held) */ #define MC_CMD_POLL_BIST 0x26 #define MC_CMD_POLL_BIST_IN_LEN 0 #define MC_CMD_POLL_BIST_OUT_LEN UNKNOWN +#define MC_CMD_POLL_BIST_OUT_SFT9001_LEN 40 +#define MC_CMD_POLL_BIST_OUT_MRSFP_LEN 8 #define MC_CMD_POLL_BIST_OUT_RESULT_OFST 0 #define MC_CMD_POLL_BIST_RUNNING 1 #define MC_CMD_POLL_BIST_PASSED 2 #define MC_CMD_POLL_BIST_FAILED 3 #define MC_CMD_POLL_BIST_TIMEOUT 4 +/* Generic: */ #define MC_CMD_POLL_BIST_OUT_PRIVATE_OFST 4 +/* SFT9001-specific: */ +/* (offset 4 unused?) */ +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A_OFST 8 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_B_OFST 12 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_C_OFST 16 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_D_OFST 20 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_A_OFST 24 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_B_OFST 28 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_C_OFST 32 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_D_OFST 36 +#define MC_CMD_POLL_BIST_SFT9001_PAIR_OK 1 +#define MC_CMD_POLL_BIST_SFT9001_PAIR_OPEN 2 +#define MC_CMD_POLL_BIST_SFT9001_INTRA_PAIR_SHORT 3 +#define MC_CMD_POLL_BIST_SFT9001_INTER_PAIR_SHORT 4 +#define MC_CMD_POLL_BIST_SFT9001_PAIR_BUSY 9 +/* mrsfp "PHY" driver: */ +#define MC_CMD_POLL_BIST_OUT_MRSFP_TEST_OFST 4 +#define MC_CMD_POLL_BIST_MRSFP_TEST_COMPLETE 0 +#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_WRITE 1 +#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_NO_ACCESS_IO_EXP 2 +#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_NO_ACCESS_MODULE 3 +#define MC_CMD_POLL_BIST_MRSFP_TEST_IO_EXP_I2C_CONFIGURE 4 +#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_I2C_NO_CROSSTALK 5 +#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_PRESENCE 6 +#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_ID_I2C_ACCESS 7 +#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_ID_SANE_VALUE 8 /* MC_CMD_PHY_SPI: (variadic in, variadic out) * Read/Write/Erase the PHY SPI device @@ -1206,6 +1245,13 @@ #define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER4_OFST \ (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 178) +#define MC_CMD_WOL_FILTER_SET_IN_LINK_MASK_OFST \ + MC_CMD_WOL_FILTER_SET_IN_DATA_OFST +#define MC_CMD_WOL_FILTER_SET_IN_LINK_UP_LBN 0 +#define MC_CMD_WOL_FILTER_SET_IN_LINK_UP_WIDTH 1 +#define MC_CMD_WOL_FILTER_SET_IN_LINK_DOWN_LBN 1 +#define MC_CMD_WOL_FILTER_SET_IN_LINK_DOWN_WIDTH 1 + #define MC_CMD_WOL_FILTER_SET_OUT_LEN 4 #define MC_CMD_WOL_FILTER_SET_OUT_FILTER_ID_OFST 0 @@ -1216,7 +1262,8 @@ #define MC_CMD_WOL_TYPE_IPV4_SYN 0x3 #define MC_CMD_WOL_TYPE_IPV6_SYN 0x4 #define MC_CMD_WOL_TYPE_BITMAP 0x5 -#define MC_CMD_WOL_TYPE_MAX 0x6 +#define MC_CMD_WOL_TYPE_LINK 0x6 +#define MC_CMD_WOL_TYPE_MAX 0x7 #define MC_CMD_FILTER_MODE_SIMPLE 0x0 #define MC_CMD_FILTER_MODE_STRUCTURED 0xffffffff @@ -1357,14 +1404,24 @@ * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held) */ #define MC_CMD_NVRAM_UPDATE_FINISH 0x3c -#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 4 +#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 8 #define MC_CMD_NVRAM_UPDATE_FINISH_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_UPDATE_FINISH_IN_REBOOT_OFST 4 #define MC_CMD_NVRAM_UPDATE_FINISH_OUT_LEN 0 /* MC_CMD_REBOOT: - * Reboot the MC. The AFTER_ASSERTION flag is intended to be used - * when the driver notices an assertion failure, to allow two ports to - * both recover (semi-)gracefully. + * Reboot the MC. + * + * The AFTER_ASSERTION flag is intended to be used when the driver notices + * an assertion failure (at which point it is expected to perform a complete + * tear down and reinitialise), to allow both ports to reset the MC once + * in an atomic fashion. + * + * Production mc firmwares are generally compiled with REBOOT_ON_ASSERT=1, + * which means that they will automatically reboot out of the assertion + * handler, so this is in practise an optional operation. It is still + * recommended that drivers execute this to support custom firmwares + * with REBOOT_ON_ASSERT=0. * * Locks required: NONE * Returns: Nothing. You get back a response with ERR=1, DATALEN=0 @@ -1469,11 +1526,10 @@ ((_ofst) + 6) /* MC_CMD_READ_SENSORS - * Returns the current (value, state) for each sensor + * Returns the current reading from each sensor * - * Returns the current (value, state) [each 16bit] of each sensor supported by - * this board, by DMA'ing a sparse array (indexed by the sensor type) into host - * memory. + * Returns a sparse array of sensor readings (indexed by the sensor + * type) into host memory. Each array element is a dword. * * The MC will send a SENSOREVT event every time any sensor changes state. The * driver is responsible for ensuring that it doesn't miss any events. The board @@ -1486,6 +1542,12 @@ #define MC_CMD_READ_SENSORS_IN_DMA_ADDR_HI_OFST 4 #define MC_CMD_READ_SENSORS_OUT_LEN 0 +/* Sensor reading fields */ +#define MC_CMD_READ_SENSOR_VALUE_LBN 0 +#define MC_CMD_READ_SENSOR_VALUE_WIDTH 16 +#define MC_CMD_READ_SENSOR_STATE_LBN 16 +#define MC_CMD_READ_SENSOR_STATE_WIDTH 8 + /* MC_CMD_GET_PHY_STATE: * Report current state of PHY. A "zombie" PHY is a PHY that has failed to @@ -1577,4 +1639,98 @@ #define MC_CMD_MAC_RESET_RESTORE_IN_LEN 0 #define MC_CMD_MAC_RESET_RESTORE_OUT_LEN 0 + +/* MC_CMD_TEST_ASSERT: + * Deliberately trigger an assert-detonation in the firmware for testing + * purposes (i.e. to allow tests that the driver copes gracefully). + * + * Locks required: None + * Returns: 0 + */ + +#define MC_CMD_TESTASSERT 0x49 +#define MC_CMD_TESTASSERT_IN_LEN 0 +#define MC_CMD_TESTASSERT_OUT_LEN 0 + +/* MC_CMD_WORKAROUND 0x4a + * + * Enable/Disable a given workaround. The mcfw will return EINVAL if it + * doesn't understand the given workaround number - which should not + * be treated as a hard error by client code. + * + * This op does not imply any semantics about each workaround, that's between + * the driver and the mcfw on a per-workaround basis. + * + * Locks required: None + * Returns: 0, EINVAL + */ +#define MC_CMD_WORKAROUND 0x4a +#define MC_CMD_WORKAROUND_IN_LEN 8 +#define MC_CMD_WORKAROUND_IN_TYPE_OFST 0 +#define MC_CMD_WORKAROUND_BUG17230 1 +#define MC_CMD_WORKAROUND_IN_ENABLED_OFST 4 +#define MC_CMD_WORKAROUND_OUT_LEN 0 + +/* MC_CMD_GET_PHY_MEDIA_INFO: + * Read media-specific data from PHY (e.g. SFP/SFP+ module ID information for + * SFP+ PHYs). + * + * The "media type" can be found via GET_PHY_CFG (GET_PHY_CFG_OUT_MEDIA_TYPE); + * the valid "page number" input values, and the output data, are interpreted + * on a per-type basis. + * + * For SFP+: PAGE=0 or 1 returns a 128-byte block read from module I2C address + * 0xA0 offset 0 or 0x80. + * Anything else: currently undefined. + * + * Locks required: None + * Return code: 0 + */ +#define MC_CMD_GET_PHY_MEDIA_INFO 0x4b +#define MC_CMD_GET_PHY_MEDIA_INFO_IN_LEN 4 +#define MC_CMD_GET_PHY_MEDIA_INFO_IN_PAGE_OFST 0 +#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LEN(_num_bytes) (4 + (_num_bytes)) +#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATALEN_OFST 0 +#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_OFST 4 + +/* MC_CMD_NVRAM_TEST: + * Test a particular NVRAM partition for valid contents (where "valid" + * depends on the type of partition). + * + * Locks required: None + * Return code: 0 + */ +#define MC_CMD_NVRAM_TEST 0x4c +#define MC_CMD_NVRAM_TEST_IN_LEN 4 +#define MC_CMD_NVRAM_TEST_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_TEST_OUT_LEN 4 +#define MC_CMD_NVRAM_TEST_OUT_RESULT_OFST 0 +#define MC_CMD_NVRAM_TEST_PASS 0 +#define MC_CMD_NVRAM_TEST_FAIL 1 +#define MC_CMD_NVRAM_TEST_NOTSUPP 2 + +/* MC_CMD_MRSFP_TWEAK: (debug) + * Read status and/or set parameters for the "mrsfp" driver in mr_rusty builds. + * I2C I/O expander bits are always read; if equaliser parameters are supplied, + * they are configured first. + * + * Locks required: None + * Return code: 0, EINVAL + */ +#define MC_CMD_MRSFP_TWEAK 0x4d +#define MC_CMD_MRSFP_TWEAK_IN_LEN_READ_ONLY 0 +#define MC_CMD_MRSFP_TWEAK_IN_LEN_EQ_CONFIG 16 +#define MC_CMD_MRSFP_TWEAK_IN_TXEQ_LEVEL_OFST 0 /* 0-6 low->high de-emph. */ +#define MC_CMD_MRSFP_TWEAK_IN_TXEQ_DT_CFG_OFST 4 /* 0-8 low->high ref.V */ +#define MC_CMD_MRSFP_TWEAK_IN_RXEQ_BOOST_OFST 8 /* 0-8 low->high boost */ +#define MC_CMD_MRSFP_TWEAK_IN_RXEQ_DT_CFG_OFST 12 /* 0-8 low->high ref.V */ +#define MC_CMD_MRSFP_TWEAK_OUT_LEN 12 +#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_INPUTS_OFST 0 /* input bits */ +#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_OUTPUTS_OFST 4 /* output bits */ +#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_DIRECTION_OFST 8 /* dirs: 0=out, 1=in */ + +/* Do NOT add new commands beyond 0x4f as part of 3.0 : 0x50 - 0x7f will be + * used for post-3.0 extensions. If you run out of space, look for gaps or + * commands that are unused in the existing range. */ + #endif /* MCDI_PCOL_H */ diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c index eb694af7a473..34c22fa986e2 100644 --- a/drivers/net/sfc/mcdi_phy.c +++ b/drivers/net/sfc/mcdi_phy.c @@ -381,6 +381,18 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx) * but by convention we don't */ efx->loopback_modes &= ~(1 << LOOPBACK_NONE); + /* Set the initial link mode */ + efx_mcdi_phy_decode_link( + efx, &efx->link_state, + MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED), + MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS), + MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL)); + + /* Default to Autonegotiated flow control if the PHY supports it */ + efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; + if (phy_data->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN)) + efx->wanted_fc |= EFX_FC_AUTO; + return 0; fail: @@ -436,7 +448,7 @@ void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa) /* The link partner capabilities are only relevent if the * link supports flow control autonegotiation */ - if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_ASYM_LBN)) + if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN)) return; /* If flow control autoneg is supported and enabled, then fine */ @@ -560,6 +572,27 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec return 0; } +static int efx_mcdi_phy_test_alive(struct efx_nic *efx) +{ + u8 outbuf[MC_CMD_GET_PHY_STATE_OUT_LEN]; + size_t outlen; + int rc; + + BUILD_BUG_ON(MC_CMD_GET_PHY_STATE_IN_LEN != 0); + + rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_STATE, NULL, 0, + outbuf, sizeof(outbuf), &outlen); + if (rc) + return rc; + + if (outlen < MC_CMD_GET_PHY_STATE_OUT_LEN) + return -EMSGSIZE; + if (MCDI_DWORD(outbuf, GET_PHY_STATE_STATE) != MC_CMD_PHY_STATE_OK) + return -EINVAL; + + return 0; +} + struct efx_phy_operations efx_mcdi_phy_ops = { .probe = efx_mcdi_phy_probe, .init = efx_port_dummy_op_int, @@ -569,6 +602,7 @@ struct efx_phy_operations efx_mcdi_phy_ops = { .remove = efx_mcdi_phy_remove, .get_settings = efx_mcdi_phy_get_settings, .set_settings = efx_mcdi_phy_set_settings, + .test_alive = efx_mcdi_phy_test_alive, .run_tests = NULL, .test_name = NULL, }; diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index 1574e52f0594..0548fcbbdcd0 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -335,3 +335,27 @@ enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx) mii_advertise_flowctrl(efx->wanted_fc), efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA)); } + +int efx_mdio_test_alive(struct efx_nic *efx) +{ + int rc; + int devad = __ffs(efx->mdio.mmds); + u16 physid1, physid2; + + mutex_lock(&efx->mac_lock); + + physid1 = efx_mdio_read(efx, devad, MDIO_DEVID1); + physid2 = efx_mdio_read(efx, devad, MDIO_DEVID2); + + if ((physid1 == 0x0000) || (physid1 == 0xffff) || + (physid2 == 0x0000) || (physid2 == 0xffff)) { + EFX_ERR(efx, "no MDIO PHY present with ID %d\n", + efx->mdio.prtad); + rc = -EINVAL; + } else { + rc = efx_mdio_check_mmds(efx, efx->mdio.mmds, 0); + } + + mutex_unlock(&efx->mac_lock); + return rc; +} diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index f6ac9503339d..f89e71929603 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -106,4 +106,7 @@ efx_mdio_set_flag(struct efx_nic *efx, int devad, int addr, mdio_set_flag(&efx->mdio, efx->mdio.prtad, devad, addr, mask, state); } +/* Liveness self-test for MDIO PHYs */ +extern int efx_mdio_test_alive(struct efx_nic *efx); + #endif /* EFX_MDIO_10G_H */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index d5aab5b3fa06..cb018e272097 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -18,7 +18,6 @@ #include <linux/etherdevice.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> -#include <linux/timer.h> #include <linux/mdio.h> #include <linux/list.h> #include <linux/pci.h> @@ -101,9 +100,6 @@ do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) * Special buffers are used for the event queues and the TX and RX * descriptor queues for each channel. They are *not* used for the * actual transmit and receive buffers. - * - * Note that for Falcon, TX and RX descriptor queues live in host memory. - * Allocation and freeing procedures must take this into account. */ struct efx_special_buffer { void *addr; @@ -300,7 +296,7 @@ struct efx_rx_queue { * @dma_addr: DMA base address of the buffer * @len: Buffer length, in bytes * - * Falcon uses these buffers for its interrupt status registers and + * The NIC uses these buffers for its interrupt status registers and * MAC stats dumps. */ struct efx_buffer { @@ -516,8 +512,9 @@ struct efx_mac_operations { * @set_settings: Set ethtool settings. Serialised by the mac_lock. * @set_npage_adv: Set abilities advertised in (Extended) Next Page * (only needed where AN bit is set in mmds) + * @test_alive: Test that PHY is 'alive' (online) * @test_name: Get the name of a PHY-specific test/result - * @run_tests: Run tests and record results as appropriate. + * @run_tests: Run tests and record results as appropriate (offline). * Flags are the ethtool tests flags. */ struct efx_phy_operations { @@ -532,6 +529,7 @@ struct efx_phy_operations { int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); void (*set_npage_adv) (struct efx_nic *efx, u32); + int (*test_alive) (struct efx_nic *efx); const char *(*test_name) (struct efx_nic *efx, unsigned int index); int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); }; @@ -672,7 +670,7 @@ union efx_multicast_hash { * @irq_status: Interrupt status buffer * @last_irq_cpu: Last CPU to handle interrupt. * This register is written with the SMP processor ID whenever an - * interrupt is handled. It is used by falcon_test_interrupt() + * interrupt is handled. It is used by efx_nic_test_interrupt() * to verify that an interrupt has occurred. * @spi_flash: SPI flash device * This field will be %NULL if no flash device is present (or for Siena). @@ -721,8 +719,7 @@ union efx_multicast_hash { * @loopback_modes: Supported loopback mode bitmask * @loopback_selftest: Offline self-test private state * - * The @priv field of the corresponding &struct net_device points to - * this. + * This is stored in the private area of the &struct net_device. */ struct efx_nic { char name[IFNAMSIZ]; @@ -995,7 +992,7 @@ static inline void clear_bit_le(unsigned nr, unsigned char *addr) * that the net driver will program into the MAC as the maximum frame * length. * - * The 10G MAC used in Falcon requires 8-byte alignment on the frame + * The 10G MAC requires 8-byte alignment on the frame * length, so we round up to the nearest 8. * * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c index db44224ed2ca..b06f8e348307 100644 --- a/drivers/net/sfc/nic.c +++ b/drivers/net/sfc/nic.c @@ -623,10 +623,6 @@ void efx_nic_remove_rx(struct efx_rx_queue *rx_queue) * * This writes the EVQ_RPTR_REG register for the specified channel's * event queue. - * - * Note that EVQ_RPTR_REG contains the index of the "last read" event, - * whereas channel->eventq_read_ptr contains the index of the "next to - * read" event. */ void efx_nic_eventq_read_ack(struct efx_channel *channel) { @@ -1384,6 +1380,15 @@ static irqreturn_t efx_legacy_interrupt(int irq, void *dev_id) efx->last_irq_cpu = raw_smp_processor_id(); EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_DWORD_FMT "\n", irq, raw_smp_processor_id(), EFX_DWORD_VAL(reg)); + } else if (EFX_WORKAROUND_15783(efx)) { + /* We can't return IRQ_HANDLED more than once on seeing ISR0=0 + * because this might be a shared interrupt, but we do need to + * check the channel every time and preemptively rearm it if + * it's idle. */ + efx_for_each_channel(channel, efx) { + if (!channel->work_pending) + efx_nic_eventq_read_ack(channel); + } } return result; diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 67eec7a6e487..1bee62c83001 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -445,4 +445,5 @@ struct efx_phy_operations falcon_qt202x_phy_ops = { .remove = qt202x_phy_remove, .get_settings = qt202x_phy_get_settings, .set_settings = efx_mdio_set_settings, + .test_alive = efx_mdio_test_alive, }; diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index 250c8827b842..cf0139a7d9a4 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -24,9 +24,6 @@ #include "nic.h" #include "selftest.h" #include "workarounds.h" -#include "spi.h" -#include "io.h" -#include "mdio_10g.h" /* * Loopback test packet structure @@ -76,42 +73,15 @@ struct efx_loopback_state { * **************************************************************************/ -static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests) +static int efx_test_phy_alive(struct efx_nic *efx, struct efx_self_tests *tests) { int rc = 0; - int devad; - u16 physid1, physid2; - - if (efx->mdio.mode_support & MDIO_SUPPORTS_C45) - devad = __ffs(efx->mdio.mmds); - else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22) - devad = MDIO_DEVAD_NONE; - else - return 0; - - mutex_lock(&efx->mac_lock); - tests->mdio = -1; - - physid1 = efx_mdio_read(efx, devad, MDIO_DEVID1); - physid2 = efx_mdio_read(efx, devad, MDIO_DEVID2); - if ((physid1 == 0x0000) || (physid1 == 0xffff) || - (physid2 == 0x0000) || (physid2 == 0xffff)) { - EFX_ERR(efx, "no MDIO PHY present with ID %d\n", - efx->mdio.prtad); - rc = -EINVAL; - goto out; + if (efx->phy_op->test_alive) { + rc = efx->phy_op->test_alive(efx); + tests->phy_alive = rc ? -1 : 1; } - if (EFX_IS10G(efx)) { - rc = efx_mdio_check_mmds(efx, efx->mdio.mmds, 0); - if (rc) - goto out; - } - -out: - mutex_unlock(&efx->mac_lock); - tests->mdio = rc ? -1 : 1; return rc; } @@ -258,7 +228,7 @@ static int efx_test_phy(struct efx_nic *efx, struct efx_self_tests *tests, return 0; mutex_lock(&efx->mac_lock); - rc = efx->phy_op->run_tests(efx, tests->phy, flags); + rc = efx->phy_op->run_tests(efx, tests->phy_ext, flags); mutex_unlock(&efx->mac_lock); return rc; } @@ -684,7 +654,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, /* Online (i.e. non-disruptive) testing * This checks interrupt generation, event delivery and PHY presence. */ - rc = efx_test_mdio(efx, tests); + rc = efx_test_phy_alive(efx, tests); if (rc && !rc_test) rc_test = rc; diff --git a/drivers/net/sfc/selftest.h b/drivers/net/sfc/selftest.h index f6feee04c96b..643bef72b99d 100644 --- a/drivers/net/sfc/selftest.h +++ b/drivers/net/sfc/selftest.h @@ -32,7 +32,7 @@ struct efx_loopback_self_tests { */ struct efx_self_tests { /* online tests */ - int mdio; + int phy_alive; int nvram; int interrupt; int eventq_dma[EFX_MAX_CHANNELS]; @@ -40,7 +40,7 @@ struct efx_self_tests { int eventq_poll[EFX_MAX_CHANNELS]; /* offline tests */ int registers; - int phy[EFX_MAX_PHY_TESTS]; + int phy_ext[EFX_MAX_PHY_TESTS]; struct efx_loopback_self_tests loopback[LOOPBACK_TEST_MAX + 1]; }; diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index f8c6771e66d8..1619fb5a64f5 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -106,16 +106,11 @@ static int siena_probe_port(struct efx_nic *efx) efx->mdio.mdio_read = siena_mdio_read; efx->mdio.mdio_write = siena_mdio_write; - /* Fill out MDIO structure and loopback modes */ + /* Fill out MDIO structure, loopback modes, and initial link state */ rc = efx->phy_op->probe(efx); if (rc != 0) return rc; - /* Initial assumption */ - efx->link_state.speed = 10000; - efx->link_state.fd = true; - efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; - /* Allocate buffer for stats */ rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, MC_CMD_MAC_NSTATS * sizeof(u64)); @@ -139,7 +134,7 @@ void siena_remove_port(struct efx_nic *efx) static const struct efx_nic_register_test siena_register_tests[] = { { FR_AZ_ADR_REGION, - EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) }, + EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) }, { FR_CZ_USR_EV_CFG, EFX_OWORD32(0x000103FF, 0x00000000, 0x00000000, 0x00000000) }, { FR_AZ_RX_CFG, @@ -181,6 +176,12 @@ static int siena_test_registers(struct efx_nic *efx) static int siena_reset_hw(struct efx_nic *efx, enum reset_type method) { + int rc; + + /* Recover from a failed assertion pre-reset */ + rc = efx_mcdi_handle_assertion(efx); + if (rc) + return rc; if (method == RESET_TYPE_WORLD) return efx_mcdi_reset_mc(efx); @@ -582,6 +583,7 @@ struct efx_nic_type siena_a0_nic_type = { .set_wol = siena_set_wol, .resume_wol = siena_init_wol, .test_registers = siena_test_registers, + .test_nvram = efx_mcdi_nvram_test_all, .default_mac_ops = &efx_mcdi_mac_operations, .revision = EFX_REV_SIENA_A0, diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 3009c297c135..10db071bd837 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -842,6 +842,7 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sfx7101_set_npage_adv, + .test_alive = efx_mdio_test_alive, .test_name = sfx7101_test_name, .run_tests = sfx7101_run_tests, }; @@ -856,6 +857,7 @@ struct efx_phy_operations falcon_sft9001_phy_ops = { .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sft9001_set_npage_adv, + .test_alive = efx_mdio_test_alive, .test_name = sft9001_test_name, .run_tests = sft9001_run_tests, }; |