diff options
Diffstat (limited to 'drivers/net/sfc/falcon_boards.c')
| -rw-r--r-- | drivers/net/sfc/falcon_boards.c | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c new file mode 100644 index 000000000000..431b74c4a96e --- /dev/null +++ b/drivers/net/sfc/falcon_boards.c @@ -0,0 +1,333 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include "net_driver.h" +#include "phy.h" +#include "boards.h" +#include "efx.h" +#include "workarounds.h" + +/* Macros for unpacking the board revision */ +/* The revision info is in host byte order. */ +#define FALCON_BOARD_TYPE(_rev) (_rev >> 8) +#define FALCON_BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf) +#define FALCON_BOARD_MINOR(_rev) (_rev & 0xf) + +/* Board types */ +#define FALCON_BOARD_SFE4002 0x02 +#define FALCON_BOARD_SFN4111T 0x51 +#define FALCON_BOARD_SFN4112F 0x52 + +/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */ +#define BLINK_INTERVAL (HZ/2) + +static void blink_led_timer(unsigned long context) +{ + struct efx_nic *efx = (struct efx_nic *)context; + struct efx_blinker *bl = &efx->board_info.blinker; + efx->board_info.set_id_led(efx, bl->state); + bl->state = !bl->state; + if (bl->resubmit) + mod_timer(&bl->timer, jiffies + BLINK_INTERVAL); +} + +static void board_blink(struct efx_nic *efx, bool blink) +{ + struct efx_blinker *blinker = &efx->board_info.blinker; + + /* The rtnl mutex serialises all ethtool ioctls, so + * nothing special needs doing here. */ + if (blink) { + blinker->resubmit = true; + blinker->state = false; + setup_timer(&blinker->timer, blink_led_timer, + (unsigned long)efx); + mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL); + } else { + blinker->resubmit = false; + if (blinker->timer.function) + del_timer_sync(&blinker->timer); + efx->board_info.init_leds(efx); + } +} + +/***************************************************************************** + * Support for LM87 sensor chip used on several boards + */ +#define LM87_REG_ALARMS1 0x41 +#define LM87_REG_ALARMS2 0x42 +#define LM87_IN_LIMITS(nr, _min, _max) \ + 0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min +#define LM87_AIN_LIMITS(nr, _min, _max) \ + 0x3B + (nr), _max, 0x1A + (nr), _min +#define LM87_TEMP_INT_LIMITS(_min, _max) \ + 0x39, _max, 0x3A, _min +#define LM87_TEMP_EXT1_LIMITS(_min, _max) \ + 0x37, _max, 0x38, _min + +#define LM87_ALARM_TEMP_INT 0x10 +#define LM87_ALARM_TEMP_EXT1 0x20 + +#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE) + +static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info, + const u8 *reg_values) +{ + struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info); + int rc; + + if (!client) + return -EIO; + + while (*reg_values) { + u8 reg = *reg_values++; + u8 value = *reg_values++; + rc = i2c_smbus_write_byte_data(client, reg, value); + if (rc) + goto err; + } + + efx->board_info.hwmon_client = client; + return 0; + +err: + i2c_unregister_device(client); + return rc; +} + +static void efx_fini_lm87(struct efx_nic *efx) +{ + i2c_unregister_device(efx->board_info.hwmon_client); +} + +static int efx_check_lm87(struct efx_nic *efx, unsigned mask) +{ + struct i2c_client *client = efx->board_info.hwmon_client; + s32 alarms1, alarms2; + + /* If link is up then do not monitor temperature */ + if (EFX_WORKAROUND_7884(efx) && efx->link_up) + return 0; + + alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1); + alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2); + if (alarms1 < 0) + return alarms1; + if (alarms2 < 0) + return alarms2; + alarms1 &= mask; + alarms2 &= mask >> 8; + if (alarms1 || alarms2) { + EFX_ERR(efx, + "LM87 detected a hardware failure (status %02x:%02x)" + "%s%s\n", + alarms1, alarms2, + (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "", + (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : ""); + return -ERANGE; + } + + return 0; +} + +#else /* !CONFIG_SENSORS_LM87 */ + +static inline int +efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info, + const u8 *reg_values) +{ + return 0; +} +static inline void efx_fini_lm87(struct efx_nic *efx) +{ +} +static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask) +{ + return 0; +} + +#endif /* CONFIG_SENSORS_LM87 */ + +/***************************************************************************** + * Support for the SFE4002 + * + */ +static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */ + +static const u8 sfe4002_lm87_regs[] = { + LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ + LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ + LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ + LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */ + LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ + LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ + LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */ + LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ + LM87_TEMP_INT_LIMITS(10, 60), /* board */ + LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + 0 +}; + +static struct i2c_board_info sfe4002_hwmon_info = { + I2C_BOARD_INFO("lm87", 0x2e), + .platform_data = &sfe4002_lm87_channel, +}; + +/****************************************************************************/ +/* LED allocations. Note that on rev A0 boards the schematic and the reality + * differ: red and green are swapped. Below is the fixed (A1) layout (there + * are only 3 A0 boards in existence, so no real reason to make this + * conditional). + */ +#define SFE4002_FAULT_LED (2) /* Red */ +#define SFE4002_RX_LED (0) /* Green */ +#define SFE4002_TX_LED (1) /* Amber */ + +static void sfe4002_init_leds(struct efx_nic *efx) +{ + /* Set the TX and RX LEDs to reflect status and activity, and the + * fault LED off */ + xfp_set_led(efx, SFE4002_TX_LED, + QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT); + xfp_set_led(efx, SFE4002_RX_LED, + QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT); + xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF); +} + +static void sfe4002_set_id_led(struct efx_nic *efx, bool state) +{ + xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON : + QUAKE_LED_OFF); +} + +static int sfe4002_check_hw(struct efx_nic *efx) +{ + /* A0 board rev. 4002s report a temperature fault the whole time + * (bad sensor) so we mask it out. */ + unsigned alarm_mask = + (efx->board_info.major == 0 && efx->board_info.minor == 0) ? + ~LM87_ALARM_TEMP_EXT1 : ~0; + + return efx_check_lm87(efx, alarm_mask); +} + +static int sfe4002_init(struct efx_nic *efx) +{ + int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs); + if (rc) + return rc; + efx->board_info.monitor = sfe4002_check_hw; + efx->board_info.init_leds = sfe4002_init_leds; + efx->board_info.set_id_led = sfe4002_set_id_led; + efx->board_info.blink = board_blink; + efx->board_info.fini = efx_fini_lm87; + return 0; +} + +/***************************************************************************** + * Support for the SFN4112F + * + */ +static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */ + +static const u8 sfn4112f_lm87_regs[] = { + LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ + LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ + LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ + LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ + LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ + LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ + LM87_TEMP_INT_LIMITS(10, 60), /* board */ + LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + 0 +}; + +static struct i2c_board_info sfn4112f_hwmon_info = { + I2C_BOARD_INFO("lm87", 0x2e), + .platform_data = &sfn4112f_lm87_channel, +}; + +#define SFN4112F_ACT_LED 0 +#define SFN4112F_LINK_LED 1 + +static void sfn4112f_init_leds(struct efx_nic *efx) +{ + xfp_set_led(efx, SFN4112F_ACT_LED, + QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT); + xfp_set_led(efx, SFN4112F_LINK_LED, + QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT); +} + +static void sfn4112f_set_id_led(struct efx_nic *efx, bool state) +{ + xfp_set_led(efx, SFN4112F_LINK_LED, + state ? QUAKE_LED_ON : QUAKE_LED_OFF); +} + +static int sfn4112f_check_hw(struct efx_nic *efx) +{ + /* Mask out unused sensors */ + return efx_check_lm87(efx, ~0x48); +} + +static int sfn4112f_init(struct efx_nic *efx) +{ + int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs); + if (rc) + return rc; + efx->board_info.monitor = sfn4112f_check_hw; + efx->board_info.init_leds = sfn4112f_init_leds; + efx->board_info.set_id_led = sfn4112f_set_id_led; + efx->board_info.blink = board_blink; + efx->board_info.fini = efx_fini_lm87; + return 0; +} + +/* This will get expanded as board-specific details get moved out of the + * PHY drivers. */ +struct falcon_board_data { + u8 type; + const char *ref_model; + const char *gen_type; + int (*init) (struct efx_nic *nic); +}; + + +static struct falcon_board_data board_data[] = { + { FALCON_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init }, + { FALCON_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init }, + { FALCON_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter", + sfn4111t_init }, + { FALCON_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter", + sfn4112f_init }, +}; + +void falcon_probe_board(struct efx_nic *efx, u16 revision_info) +{ + struct falcon_board_data *data = NULL; + int i; + + efx->board_info.type = FALCON_BOARD_TYPE(revision_info); + efx->board_info.major = FALCON_BOARD_MAJOR(revision_info); + efx->board_info.minor = FALCON_BOARD_MINOR(revision_info); + + for (i = 0; i < ARRAY_SIZE(board_data); i++) + if (board_data[i].type == efx->board_info.type) + data = &board_data[i]; + + if (data) { + EFX_INFO(efx, "board is %s rev %c%d\n", + (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC) + ? data->ref_model : data->gen_type, + 'A' + efx->board_info.major, efx->board_info.minor); + efx->board_info.init = data->init; + } else { + EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type); + } +} |