diff options
Diffstat (limited to 'drivers/net/qlge')
| -rw-r--r-- | drivers/net/qlge/qlge.h | 37 | ||||
| -rw-r--r-- | drivers/net/qlge/qlge_ethtool.c | 2 | ||||
| -rw-r--r-- | drivers/net/qlge/qlge_main.c | 219 | ||||
| -rw-r--r-- | drivers/net/qlge/qlge_mpi.c | 130 |
4 files changed, 282 insertions, 106 deletions
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index a9845a2f243f..c2383adcd527 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -9,6 +9,7 @@ #include <linux/pci.h> #include <linux/netdevice.h> +#include <linux/rtnetlink.h> /* * General definitions... @@ -94,6 +95,7 @@ enum { /* Misc. stuff */ MAILBOX_COUNT = 16, + MAILBOX_TIMEOUT = 5, PROC_ADDR_RDY = (1 << 31), PROC_ADDR_R = (1 << 30), @@ -135,9 +137,9 @@ enum { RST_FO_TFO = (1 << 0), RST_FO_RR_MASK = 0x00060000, RST_FO_RR_CQ_CAM = 0x00000000, - RST_FO_RR_DROP = 0x00000001, - RST_FO_RR_DQ = 0x00000002, - RST_FO_RR_RCV_FUNC_CQ = 0x00000003, + RST_FO_RR_DROP = 0x00000002, + RST_FO_RR_DQ = 0x00000004, + RST_FO_RR_RCV_FUNC_CQ = 0x00000006, RST_FO_FRB = (1 << 12), RST_FO_MOP = (1 << 13), RST_FO_REG = (1 << 14), @@ -802,6 +804,12 @@ enum { MB_CMD_SET_PORT_CFG = 0x00000122, MB_CMD_GET_PORT_CFG = 0x00000123, MB_CMD_GET_LINK_STS = 0x00000124, + MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */ + MB_SET_MPI_TFK_STOP = (1 << 0), + MB_SET_MPI_TFK_RESUME = (1 << 1), + MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */ + MB_GET_MPI_TFK_STOPPED = (1 << 0), + MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1), /* Mailbox Command Status. */ MB_CMD_STS_GOOD = 0x00004000, /* Success. */ @@ -1167,7 +1175,7 @@ struct ricb { #define RSS_RI6 0x40 #define RSS_RT6 0x80 __le16 mask; - __le32 hash_cq_id[256]; + u8 hash_cq_id[1024]; __le32 ipv6_hash_key[10]; __le32 ipv4_hash_key[4]; } __attribute((packed)); @@ -1381,15 +1389,15 @@ struct intr_context { /* adapter flags definitions. */ enum { - QL_ADAPTER_UP = (1 << 0), /* Adapter has been brought up. */ - QL_LEGACY_ENABLED = (1 << 3), - QL_MSI_ENABLED = (1 << 3), - QL_MSIX_ENABLED = (1 << 4), - QL_DMA64 = (1 << 5), - QL_PROMISCUOUS = (1 << 6), - QL_ALLMULTI = (1 << 7), - QL_PORT_CFG = (1 << 8), - QL_CAM_RT_SET = (1 << 9), + QL_ADAPTER_UP = 0, /* Adapter has been brought up. */ + QL_LEGACY_ENABLED = 1, + QL_MSI_ENABLED = 2, + QL_MSIX_ENABLED = 3, + QL_DMA64 = 4, + QL_PROMISCUOUS = 5, + QL_ALLMULTI = 6, + QL_PORT_CFG = 7, + QL_CAM_RT_SET = 8, }; /* link_status bit definitions */ @@ -1477,7 +1485,6 @@ struct ql_adapter { u32 mailbox_in; u32 mailbox_out; struct mbox_params idc_mbc; - struct mutex mpi_mutex; int tx_ring_size; int rx_ring_size; @@ -1606,6 +1613,8 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data); int ql_mb_about_fw(struct ql_adapter *qdev); void ql_link_on(struct ql_adapter *qdev); void ql_link_off(struct ql_adapter *qdev); +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control); +int ql_wait_fifo_empty(struct ql_adapter *qdev); #if 1 #define QL_ALL_DUMP diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 68f9bd280f86..52073946bce3 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -45,7 +45,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) if (!netif_running(qdev->ndev)) return status; - spin_lock(&qdev->hw_lock); /* Skip the default queue, and update the outbound handler * queues if they changed. */ @@ -92,7 +91,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) } } exit: - spin_unlock(&qdev->hw_lock); return status; } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 7783c5db81dc..a2fc70a0d0cc 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -34,7 +34,6 @@ #include <linux/etherdevice.h> #include <linux/ethtool.h> #include <linux/skbuff.h> -#include <linux/rtnetlink.h> #include <linux/if_vlan.h> #include <linux/delay.h> #include <linux/mm.h> @@ -321,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, switch (type) { case MAC_ADDR_TYPE_MULTI_MAC: + { + u32 upper = (addr[0] << 8) | addr[1]; + u32 lower = (addr[2] << 24) | (addr[3] << 16) | + (addr[4] << 8) | (addr[5]); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | + (index << MAC_ADDR_IDX_SHIFT) | + type | MAC_ADDR_E); + ql_write32(qdev, MAC_ADDR_DATA, lower); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | + (index << MAC_ADDR_IDX_SHIFT) | + type | MAC_ADDR_E); + + ql_write32(qdev, MAC_ADDR_DATA, upper); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + break; + } case MAC_ADDR_TYPE_CAM_MAC: { u32 cam_output; @@ -366,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, and possibly the function id. Right now we hardcode the route field to NIC core. */ - if (type == MAC_ADDR_TYPE_CAM_MAC) { - cam_output = (CAM_OUT_ROUTE_NIC | - (qdev-> - func << CAM_OUT_FUNC_SHIFT) | - (0 << CAM_OUT_CQ_ID_SHIFT)); - if (qdev->vlgrp) - cam_output |= CAM_OUT_RV; - /* route to NIC core */ - ql_write32(qdev, MAC_ADDR_DATA, cam_output); - } + cam_output = (CAM_OUT_ROUTE_NIC | + (qdev-> + func << CAM_OUT_FUNC_SHIFT) | + (0 << CAM_OUT_CQ_ID_SHIFT)); + if (qdev->vlgrp) + cam_output |= CAM_OUT_RV; + /* route to NIC core */ + ql_write32(qdev, MAC_ADDR_DATA, cam_output); break; } case MAC_ADDR_TYPE_VLAN: @@ -547,14 +575,14 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask, } case RT_IDX_MCAST: /* Pass up All Multicast frames. */ { - value = RT_IDX_DST_CAM_Q | /* dest */ + value = RT_IDX_DST_DFLT_Q | /* dest */ RT_IDX_TYPE_NICQ | /* type */ (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */ break; } case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */ { - value = RT_IDX_DST_CAM_Q | /* dest */ + value = RT_IDX_DST_DFLT_Q | /* dest */ RT_IDX_TYPE_NICQ | /* type */ (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ break; @@ -1926,12 +1954,10 @@ static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid) status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); if (status) return; - spin_lock(&qdev->hw_lock); if (ql_set_mac_addr_reg (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n"); } - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); } @@ -1945,12 +1971,10 @@ static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid) if (status) return; - spin_lock(&qdev->hw_lock); if (ql_set_mac_addr_reg (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n"); } - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); } @@ -2001,15 +2025,17 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) /* * Check MPI processor activity. */ - if (var & STS_PI) { + if ((var & STS_PI) && + (ql_read32(qdev, INTR_MASK) & INTR_MASK_PI)) { /* * We've got an async event or mailbox completion. * Handle it and clear the source of the interrupt. */ QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n"); ql_disable_completion_interrupt(qdev, intr_context->intr); - queue_delayed_work_on(smp_processor_id(), qdev->workqueue, - &qdev->mpi_work, 0); + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); + queue_delayed_work_on(smp_processor_id(), + qdev->workqueue, &qdev->mpi_work, 0); work_done++; } @@ -3080,6 +3106,12 @@ err_irq: static int ql_start_rss(struct ql_adapter *qdev) { + u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, + 0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f, + 0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b, + 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, + 0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, + 0xbe, 0xac, 0x01, 0xfa}; struct ricb *ricb = &qdev->ricb; int status = 0; int i; @@ -3089,21 +3121,17 @@ static int ql_start_rss(struct ql_adapter *qdev) ricb->base_cq = RSS_L4K; ricb->flags = - (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 | - RSS_RT6); - ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1); + (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6); + ricb->mask = cpu_to_le16((u16)(0x3ff)); /* * Fill out the Indirection Table. */ - for (i = 0; i < 256; i++) - hash_id[i] = i & (qdev->rss_ring_count - 1); + for (i = 0; i < 1024; i++) + hash_id[i] = (i & (qdev->rss_ring_count - 1)); - /* - * Random values for the IPv6 and IPv4 Hash Keys. - */ - get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40); - get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16); + memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40); + memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16); QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n"); @@ -3142,14 +3170,14 @@ static int ql_route_initialize(struct ql_adapter *qdev) { int status = 0; - status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + /* Clear all the entries in the routing table. */ + status = ql_clear_routing_entries(qdev); if (status) return status; - /* Clear all the entries in the routing table. */ - status = ql_clear_routing_entries(qdev); + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) - goto exit; + return status; status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1); if (status) { @@ -3242,6 +3270,13 @@ static int ql_adapter_initialize(struct ql_adapter *qdev) ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP | min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE)); + /* Set RX packet routing to use port/pci function on which the + * packet arrived on in addition to usual frame routing. + * This is helpful on bonding where both interfaces can have + * the same MAC address. + */ + ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ); + /* Start up the rx queues. */ for (i = 0; i < qdev->rx_ring_count; i++) { status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]); @@ -3314,6 +3349,13 @@ static int ql_adapter_reset(struct ql_adapter *qdev) end_jiffies = jiffies + max((unsigned long)1, usecs_to_jiffies(30)); + + /* Stop management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); + + /* Wait for the NIC and MGMNT FIFOs to empty. */ + ql_wait_fifo_empty(qdev); + ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); do { @@ -3329,6 +3371,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev) status = -ETIMEDOUT; } + /* Resume management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME); return status; } @@ -3380,12 +3424,10 @@ static int ql_adapter_down(struct ql_adapter *qdev) ql_free_rx_buffers(qdev); - spin_lock(&qdev->hw_lock); status = ql_adapter_reset(qdev); if (status) QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n", qdev->func); - spin_unlock(&qdev->hw_lock); return status; } @@ -3587,7 +3629,6 @@ static void qlge_set_multicast_list(struct net_device *ndev) status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) return; - spin_lock(&qdev->hw_lock); /* * Set or clear promiscuous mode if a * transition is taking place. @@ -3664,7 +3705,6 @@ static void qlge_set_multicast_list(struct net_device *ndev) } } exit: - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_RT_IDX_MASK); } @@ -3684,10 +3724,8 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p) status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); if (status) return status; - spin_lock(&qdev->hw_lock); status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr, MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ); - spin_unlock(&qdev->hw_lock); if (status) QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n"); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); @@ -3705,7 +3743,7 @@ static void ql_asic_reset_work(struct work_struct *work) struct ql_adapter *qdev = container_of(work, struct ql_adapter, asic_reset_work.work); int status; - + rtnl_lock(); status = ql_adapter_down(qdev); if (status) goto error; @@ -3714,11 +3752,17 @@ static void ql_asic_reset_work(struct work_struct *work) if (status) goto error; + /* Restore rx mode. */ + clear_bit(QL_ALLMULTI, &qdev->flags); + clear_bit(QL_PROMISCUOUS, &qdev->flags); + qlge_set_multicast_list(qdev->ndev); + + rtnl_unlock(); return; error: QPRINTK(qdev, IFUP, ALERT, "Driver up/down cycle failed, closing device\n"); - rtnl_lock(); + set_bit(QL_ADAPTER_UP, &qdev->flags); dev_close(qdev->ndev); rtnl_unlock(); @@ -3834,11 +3878,14 @@ static int __devinit ql_init_device(struct pci_dev *pdev, return err; } + qdev->ndev = ndev; + qdev->pdev = pdev; + pci_set_drvdata(pdev, ndev); pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (pos <= 0) { dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, " "aborting.\n"); - goto err_out; + return pos; } else { pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16); val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN; @@ -3851,7 +3898,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(&pdev->dev, "PCI region request failed.\n"); - goto err_out; + return err; } pci_set_master(pdev); @@ -3869,7 +3916,9 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } - pci_set_drvdata(pdev, ndev); + /* Set PCIe reset type for EEH to fundamental. */ + pdev->needs_freset = 1; + pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); @@ -3889,8 +3938,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } - qdev->ndev = ndev; - qdev->pdev = pdev; err = ql_get_board_info(qdev); if (err) { dev_err(&pdev->dev, "Register access failed.\n"); @@ -3930,7 +3977,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work); INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work); INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work); - mutex_init(&qdev->mpi_mutex); init_completion(&qdev->ide_completion); if (!cards_found) { @@ -4027,6 +4073,33 @@ static void __devexit qlge_remove(struct pci_dev *pdev) free_netdev(ndev); } +/* Clean up resources without touching hardware. */ +static void ql_eeh_close(struct net_device *ndev) +{ + int i; + struct ql_adapter *qdev = netdev_priv(ndev); + + if (netif_carrier_ok(ndev)) { + netif_carrier_off(ndev); + netif_stop_queue(ndev); + } + + if (test_bit(QL_ADAPTER_UP, &qdev->flags)) + cancel_delayed_work_sync(&qdev->asic_reset_work); + cancel_delayed_work_sync(&qdev->mpi_reset_work); + cancel_delayed_work_sync(&qdev->mpi_work); + cancel_delayed_work_sync(&qdev->mpi_idc_work); + cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); + + for (i = 0; i < qdev->rss_ring_count; i++) + netif_napi_del(&qdev->rx_ring[i].napi); + + clear_bit(QL_ADAPTER_UP, &qdev->flags); + ql_tx_ring_clean(qdev); + ql_free_rx_buffers(qdev); + ql_release_adapter_resources(qdev); +} + /* * This callback is called by the PCI subsystem whenever * a PCI bus error is detected. @@ -4035,17 +4108,21 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, enum pci_channel_state state) { struct net_device *ndev = pci_get_drvdata(pdev); - struct ql_adapter *qdev = netdev_priv(ndev); - - netif_device_detach(ndev); - if (state == pci_channel_io_perm_failure) + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + netif_device_detach(ndev); + if (netif_running(ndev)) + ql_eeh_close(ndev); + pci_disable_device(pdev); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + dev_err(&pdev->dev, + "%s: pci_channel_io_perm_failure.\n", __func__); return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(ndev)) - ql_adapter_down(qdev); - - pci_disable_device(pdev); + } /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -4062,25 +4139,15 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev) struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + pdev->error_state = pci_channel_io_normal; + + pci_restore_state(pdev); if (pci_enable_device(pdev)) { QPRINTK(qdev, IFUP, ERR, "Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } - pci_set_master(pdev); - - netif_carrier_off(ndev); - ql_adapter_reset(qdev); - - /* Make sure the EEPROM is good */ - memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); - - if (!is_valid_ether_addr(ndev->perm_addr)) { - QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - return PCI_ERS_RESULT_RECOVERED; } @@ -4088,17 +4155,21 @@ static void qlge_io_resume(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + int err = 0; - pci_set_master(pdev); - + if (ql_adapter_reset(qdev)) + QPRINTK(qdev, DRV, ERR, "reset FAILED!\n"); if (netif_running(ndev)) { - if (ql_adapter_up(qdev)) { + err = qlge_open(ndev); + if (err) { QPRINTK(qdev, IFUP, ERR, "Device initialization failed after reset.\n"); return; } + } else { + QPRINTK(qdev, IFUP, ERR, + "Device was not running prior to EEH.\n"); } - netif_device_attach(ndev); } diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 6685bd97da91..aec05f266107 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -470,9 +470,9 @@ end: */ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) { - int status, count; + int status; + unsigned long count; - mutex_lock(&qdev->mpi_mutex); /* Begin polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); @@ -492,14 +492,14 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the command to complete. We loop * here because some AEN might arrive while * we're waiting for the mailbox command to - * complete. If more than 5 arrive then we can + * complete. If more than 5 seconds expire we can * assume something is wrong. */ - count = 5; + count = jiffies + HZ * MAILBOX_TIMEOUT; do { /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker @@ -518,15 +518,15 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) MB_CMD_STS_GOOD) || ((mbcp->mbox_out[0] & 0x0000f000) == MB_CMD_STS_INTRMDT)) - break; - } while (--count); + goto done; + } while (time_before(jiffies, count)); - if (!count) { - QPRINTK(qdev, DRV, ERR, - "Timed out waiting for mailbox complete.\n"); - status = -ETIMEDOUT; - goto end; - } + QPRINTK(qdev, DRV, ERR, + "Timed out waiting for mailbox complete.\n"); + status = -ETIMEDOUT; + goto end; + +done: /* Now we can clear the interrupt condition * and look at our status. @@ -541,7 +541,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) status = -EIO; } end: - mutex_unlock(&qdev->mpi_mutex); /* End polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); return status; @@ -770,13 +769,104 @@ static int ql_idc_wait(struct ql_adapter *qdev) return status; } +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 1; + mbcp->out_count = 2; + + mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL; + mbcp->mbox_in[1] = control; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + /* This indicates that the firmware is + * already in the state we are trying to + * change it to. + */ + QPRINTK(qdev, DRV, ERR, + "Command parameters make no change.\n"); + } + return status; +} + +/* Returns a negative error code or the mailbox command status. */ +static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + *control = 0; + + mbcp->in_count = 1; + mbcp->out_count = 1; + + mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) { + *control = mbcp->mbox_in[1]; + return status; + } + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + QPRINTK(qdev, DRV, ERR, + "Failed to get MPI traffic control.\n"); + status = -EIO; + } + return status; +} + +int ql_wait_fifo_empty(struct ql_adapter *qdev) +{ + int count = 5; + u32 mgmnt_fifo_empty; + u32 nic_fifo_empty; + + do { + nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE; + ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty); + mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY; + if (nic_fifo_empty && mgmnt_fifo_empty) + return 0; + msleep(100); + } while (count-- > 0); + return -ETIMEDOUT; +} + /* API called in work thread context to set new TX/RX * maximum frame size values to match MTU. */ static int ql_set_port_cfg(struct ql_adapter *qdev) { int status; + rtnl_lock(); status = ql_mb_set_port_cfg(qdev); + rtnl_unlock(); if (status) return status; status = ql_idc_wait(qdev); @@ -797,7 +887,9 @@ void ql_mpi_port_cfg_work(struct work_struct *work) container_of(work, struct ql_adapter, mpi_port_cfg_work.work); int status; + rtnl_lock(); status = ql_mb_get_port_cfg(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: Failed to get port config data.\n"); @@ -855,7 +947,9 @@ void ql_mpi_idc_work(struct work_struct *work) * needs to be set. * */ set_bit(QL_CAM_RT_SET, &qdev->flags); + rtnl_lock(); status = ql_mb_idc_ack(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: No pending IDC!\n"); @@ -871,7 +965,9 @@ void ql_mpi_work(struct work_struct *work) struct mbox_params *mbcp = &mbc; int err = 0; - mutex_lock(&qdev->mpi_mutex); + rtnl_lock(); + /* Begin polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); while (ql_read32(qdev, STS) & STS_PI) { memset(mbcp, 0, sizeof(struct mbox_params)); @@ -884,7 +980,9 @@ void ql_mpi_work(struct work_struct *work) break; } - mutex_unlock(&qdev->mpi_mutex); + /* End polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); + rtnl_unlock(); ql_enable_completion_interrupt(qdev, 0); } |