diff options
Diffstat (limited to 'drivers/net/phy')
-rw-r--r-- | drivers/net/phy/at803x.c | 4 | ||||
-rw-r--r-- | drivers/net/phy/marvell.c | 4 | ||||
-rw-r--r-- | drivers/net/phy/marvell10g.c | 5 | ||||
-rw-r--r-- | drivers/net/phy/mdio_bus.c | 1 | ||||
-rw-r--r-- | drivers/net/phy/meson-gxl.c | 74 | ||||
-rw-r--r-- | drivers/net/phy/micrel.c | 6 | ||||
-rw-r--r-- | drivers/net/phy/phy.c | 9 | ||||
-rw-r--r-- | drivers/net/phy/phy_device.c | 10 | ||||
-rw-r--r-- | drivers/net/phy/phylink.c | 1 | ||||
-rw-r--r-- | drivers/net/phy/sfp.c | 41 |
10 files changed, 125 insertions, 30 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 5f93e6add563..e911e4990b20 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -239,14 +239,10 @@ static int at803x_resume(struct phy_device *phydev) { int value; - mutex_lock(&phydev->lock); - value = phy_read(phydev, MII_BMCR); value &= ~(BMCR_PDOWN | BMCR_ISOLATE); phy_write(phydev, MII_BMCR, value); - mutex_unlock(&phydev->lock); - return 0; } diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4d02b27df044..b5a8f750e433 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -637,6 +637,10 @@ static int m88e1510_config_aneg(struct phy_device *phydev) if (err < 0) goto error; + /* Do not touch the fiber page if we're in copper->sgmii mode */ + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) + return 0; + /* Then the fiber link */ err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE); if (err < 0) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index aebc08beceba..21b3f36e023a 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -16,6 +16,7 @@ * link takes priority and the other port is completely locked out. */ #include <linux/phy.h> +#include <linux/marvell_phy.h> enum { MV_PCS_BASE_T = 0x0000, @@ -338,7 +339,7 @@ static int mv3310_read_status(struct phy_device *phydev) static struct phy_driver mv3310_drivers[] = { { .phy_id = 0x002b09aa, - .phy_id_mask = 0xffffffff, + .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "mv88x3310", .features = SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | @@ -360,7 +361,7 @@ static struct phy_driver mv3310_drivers[] = { module_phy_driver(mv3310_drivers); static struct mdio_device_id __maybe_unused mv3310_tbl[] = { - { 0x002b09aa, 0xffffffff }, + { 0x002b09aa, MARVELL_PHY_ID_MASK }, { }, }; MODULE_DEVICE_TABLE(mdio, mv3310_tbl); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 2df7b62c1a36..54d00a1d2bef 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -270,6 +270,7 @@ static void of_mdiobus_link_mdiodev(struct mii_bus *bus, if (addr == mdiodev->addr) { dev->of_node = child; + dev->fwnode = of_fwnode_handle(child); return; } } diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 1ea69b7585d9..842eb871a6e3 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -22,6 +22,7 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/netdevice.h> +#include <linux/bitfield.h> static int meson_gxl_config_init(struct phy_device *phydev) { @@ -50,6 +51,77 @@ static int meson_gxl_config_init(struct phy_device *phydev) return 0; } +/* This function is provided to cope with the possible failures of this phy + * during aneg process. When aneg fails, the PHY reports that aneg is done + * but the value found in MII_LPA is wrong: + * - Early failures: MII_LPA is just 0x0001. if MII_EXPANSION reports that + * the link partner (LP) supports aneg but the LP never acked our base + * code word, it is likely that we never sent it to begin with. + * - Late failures: MII_LPA is filled with a value which seems to make sense + * but it actually is not what the LP is advertising. It seems that we + * can detect this using a magic bit in the WOL bank (reg 12 - bit 12). + * If this particular bit is not set when aneg is reported being done, + * it means MII_LPA is likely to be wrong. + * + * In both case, forcing a restart of the aneg process solve the problem. + * When this failure happens, the first retry is usually successful but, + * in some cases, it may take up to 6 retries to get a decent result + */ +static int meson_gxl_read_status(struct phy_device *phydev) +{ + int ret, wol, lpa, exp; + + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = genphy_aneg_done(phydev); + if (ret < 0) + return ret; + else if (!ret) + goto read_status_continue; + + /* Need to access WOL bank, make sure the access is open */ + ret = phy_write(phydev, 0x14, 0x0000); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0400); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0000); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0400); + if (ret) + return ret; + + /* Request LPI_STATUS WOL register */ + ret = phy_write(phydev, 0x14, 0x8D80); + if (ret) + return ret; + + /* Read LPI_STATUS value */ + wol = phy_read(phydev, 0x15); + if (wol < 0) + return wol; + + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + exp = phy_read(phydev, MII_EXPANSION); + if (exp < 0) + return exp; + + if (!(wol & BIT(12)) || + ((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) { + /* Looks like aneg failed after all */ + phydev_dbg(phydev, "LPA corruption - aneg restart\n"); + return genphy_restart_aneg(phydev); + } + } + +read_status_continue: + return genphy_read_status(phydev); +} + static struct phy_driver meson_gxl_phy[] = { { .phy_id = 0x01814400, @@ -60,7 +132,7 @@ static struct phy_driver meson_gxl_phy[] = { .config_init = meson_gxl_config_init, .config_aneg = genphy_config_aneg, .aneg_done = genphy_aneg_done, - .read_status = genphy_read_status, + .read_status = meson_gxl_read_status, .suspend = genphy_suspend, .resume = genphy_resume, }, diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index fdb43dd9b5cd..ab4614113403 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -496,16 +496,18 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev, return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval); } +/* Center KSZ9031RNX FLP timing at 16ms. */ static int ksz9031_center_flp_timing(struct phy_device *phydev) { int result; - /* Center KSZ9031RNX FLP timing at 16ms. */ result = ksz9031_extended_write(phydev, OP_DATA, 0, MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006); + if (result) + return result; + result = ksz9031_extended_write(phydev, OP_DATA, 0, MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80); - if (result) return result; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 2b1e67bc1e73..ed10d1fc8f59 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -828,7 +828,6 @@ EXPORT_SYMBOL(phy_stop); */ void phy_start(struct phy_device *phydev) { - bool do_resume = false; int err = 0; mutex_lock(&phydev->lock); @@ -841,6 +840,9 @@ void phy_start(struct phy_device *phydev) phydev->state = PHY_UP; break; case PHY_HALTED: + /* if phy was suspended, bring the physical link up again */ + phy_resume(phydev); + /* make sure interrupts are re-enabled for the PHY */ if (phydev->irq != PHY_POLL) { err = phy_enable_interrupts(phydev); @@ -849,17 +851,12 @@ void phy_start(struct phy_device *phydev) } phydev->state = PHY_RESUMING; - do_resume = true; break; default: break; } mutex_unlock(&phydev->lock); - /* if phy was suspended, bring the physical link up again */ - if (do_resume) - phy_resume(phydev); - phy_trigger_machine(phydev, true); } EXPORT_SYMBOL(phy_start); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 67f25ac29025..b15b31ca2618 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -135,7 +135,9 @@ static int mdio_bus_phy_resume(struct device *dev) if (!mdio_bus_phy_may_suspend(phydev)) goto no_resume; + mutex_lock(&phydev->lock); ret = phy_resume(phydev); + mutex_unlock(&phydev->lock); if (ret < 0) return ret; @@ -1026,7 +1028,9 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (err) goto error; + mutex_lock(&phydev->lock); phy_resume(phydev); + mutex_unlock(&phydev->lock); phy_led_triggers_register(phydev); return err; @@ -1157,6 +1161,8 @@ int phy_resume(struct phy_device *phydev) struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver); int ret = 0; + WARN_ON(!mutex_is_locked(&phydev->lock)); + if (phydev->drv && phydrv->resume) ret = phydrv->resume(phydev); @@ -1639,13 +1645,9 @@ int genphy_resume(struct phy_device *phydev) { int value; - mutex_lock(&phydev->lock); - value = phy_read(phydev, MII_BMCR); phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN); - mutex_unlock(&phydev->lock); - return 0; } EXPORT_SYMBOL(genphy_resume); diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index e3bbc70372d3..5dc9668dde34 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -773,6 +773,7 @@ void phylink_stop(struct phylink *pl) sfp_upstream_stop(pl->sfp_bus); set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); + queue_work(system_power_efficient_wq, &pl->resolve); flush_work(&pl->resolve); } EXPORT_SYMBOL_GPL(phylink_stop); diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index e381811e5f11..9dfc1c4c954f 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -351,12 +351,13 @@ static void sfp_sm_link_check_los(struct sfp *sfp) { unsigned int los = sfp->state & SFP_F_LOS; - /* FIXME: what if neither SFP_OPTIONS_LOS_INVERTED nor - * SFP_OPTIONS_LOS_NORMAL are set? For now, we assume - * the same as SFP_OPTIONS_LOS_NORMAL set. + /* If neither SFP_OPTIONS_LOS_INVERTED nor SFP_OPTIONS_LOS_NORMAL + * are set, we assume that no LOS signal is available. */ - if (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED) + if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED)) los ^= SFP_F_LOS; + else if (!(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL))) + los = 0; if (los) sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); @@ -364,6 +365,22 @@ static void sfp_sm_link_check_los(struct sfp *sfp) sfp_sm_link_up(sfp); } +static bool sfp_los_event_active(struct sfp *sfp, unsigned int event) +{ + return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) && + event == SFP_E_LOS_LOW) || + (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) && + event == SFP_E_LOS_HIGH); +} + +static bool sfp_los_event_inactive(struct sfp *sfp, unsigned int event) +{ + return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) && + event == SFP_E_LOS_HIGH) || + (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) && + event == SFP_E_LOS_LOW); +} + static void sfp_sm_fault(struct sfp *sfp, bool warn) { if (sfp->sm_retries && !--sfp->sm_retries) { @@ -470,6 +487,11 @@ static int sfp_sm_mod_probe(struct sfp *sfp) return -EINVAL; } + /* If the module requires address swap mode, warn about it */ + if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) + dev_warn(sfp->dev, + "module address swap to access page 0xA2 is not supported.\n"); + return sfp_module_insert(sfp->sfp_bus, &sfp->id); } @@ -581,9 +603,7 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event) case SFP_S_WAIT_LOS: if (event == SFP_E_TX_FAULT) sfp_sm_fault(sfp, true); - else if (event == - (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ? - SFP_E_LOS_HIGH : SFP_E_LOS_LOW)) + else if (sfp_los_event_inactive(sfp, event)) sfp_sm_link_up(sfp); break; @@ -591,9 +611,7 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event) if (event == SFP_E_TX_FAULT) { sfp_sm_link_down(sfp); sfp_sm_fault(sfp, true); - } else if (event == - (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ? - SFP_E_LOS_LOW : SFP_E_LOS_HIGH)) { + } else if (sfp_los_event_active(sfp, event)) { sfp_sm_link_down(sfp); sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); } @@ -639,7 +657,8 @@ static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo) { /* locking... and check module is present */ - if (sfp->id.ext.sff8472_compliance) { + if (sfp->id.ext.sff8472_compliance && + !(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)) { modinfo->type = ETH_MODULE_SFF_8472; modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; } else { |