diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/at803x.c | 65 | ||||
| -rw-r--r-- | drivers/net/phy/dp83848.c | 3 |
2 files changed, 42 insertions, 26 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index f279a897a5c7..a52b560e428b 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -42,19 +42,24 @@ #define AT803X_MMD_ACCESS_CONTROL 0x0D #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E #define AT803X_FUNC_DATA 0x4003 +#define AT803X_REG_CHIP_CONFIG 0x1f +#define AT803X_BT_BX_REG_SEL 0x8000 #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E +#define AT803X_MODE_CFG_MASK 0x0F +#define AT803X_MODE_CFG_SGMII 0x01 + +#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ +#define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + #define AT803X_DEBUG_REG_0 0x00 #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) #define AT803X_DEBUG_REG_5 0x05 #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) -#define AT803X_REG_CHIP_CONFIG 0x1f -#define AT803X_BT_BX_REG_SEL 0x8000 - #define ATH8030_PHY_ID 0x004dd076 #define ATH8031_PHY_ID 0x004dd074 #define ATH8035_PHY_ID 0x004dd072 @@ -209,7 +214,6 @@ static int at803x_suspend(struct phy_device *phydev) { int value; int wol_enabled; - int ccr; mutex_lock(&phydev->lock); @@ -225,16 +229,6 @@ static int at803x_suspend(struct phy_device *phydev) phy_write(phydev, MII_BMCR, value); - if (phydev->interface != PHY_INTERFACE_MODE_SGMII) - goto done; - - /* also power-down SGMII interface */ - ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); - phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL); - phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN); - phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL); - -done: mutex_unlock(&phydev->lock); return 0; @@ -243,7 +237,6 @@ done: static int at803x_resume(struct phy_device *phydev) { int value; - int ccr; mutex_lock(&phydev->lock); @@ -251,17 +244,6 @@ static int at803x_resume(struct phy_device *phydev) value &= ~(BMCR_PDOWN | BMCR_ISOLATE); phy_write(phydev, MII_BMCR, value); - if (phydev->interface != PHY_INTERFACE_MODE_SGMII) - goto done; - - /* also power-up SGMII interface */ - ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); - phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL); - value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE); - phy_write(phydev, MII_BMCR, value); - phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL); - -done: mutex_unlock(&phydev->lock); return 0; @@ -381,6 +363,36 @@ static void at803x_link_change_notify(struct phy_device *phydev) } } +static int at803x_aneg_done(struct phy_device *phydev) +{ + int ccr; + + int aneg_done = genphy_aneg_done(phydev); + if (aneg_done != BMSR_ANEGCOMPLETE) + return aneg_done; + + /* + * in SGMII mode, if copper side autoneg is successful, + * also check SGMII side autoneg result + */ + ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); + if ((ccr & AT803X_MODE_CFG_MASK) != AT803X_MODE_CFG_SGMII) + return aneg_done; + + /* switch to SGMII/fiber page */ + phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL); + + /* check if the SGMII link is OK. */ + if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) { + pr_warn("803x_aneg_done: SGMII link is not ok\n"); + aneg_done = 0; + } + /* switch back to copper page */ + phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL); + + return aneg_done; +} + static struct phy_driver at803x_driver[] = { { /* ATHEROS 8035 */ @@ -432,6 +444,7 @@ static struct phy_driver at803x_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .aneg_done = at803x_aneg_done, .ack_interrupt = &at803x_ack_interrupt, .config_intr = &at803x_config_intr, } }; diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c index 03d54c4adc88..800b39f06279 100644 --- a/drivers/net/phy/dp83848.c +++ b/drivers/net/phy/dp83848.c @@ -19,6 +19,7 @@ #define TI_DP83848C_PHY_ID 0x20005ca0 #define NS_DP83848C_PHY_ID 0x20005c90 #define TLK10X_PHY_ID 0x2000a210 +#define TI_DP83822_PHY_ID 0x2000a240 /* Registers */ #define DP83848_MICR 0x11 /* MII Interrupt Control Register */ @@ -77,6 +78,7 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = { { TI_DP83848C_PHY_ID, 0xfffffff0 }, { NS_DP83848C_PHY_ID, 0xfffffff0 }, { TLK10X_PHY_ID, 0xfffffff0 }, + { TI_DP83822_PHY_ID, 0xfffffff0 }, { } }; MODULE_DEVICE_TABLE(mdio, dp83848_tbl); @@ -105,6 +107,7 @@ static struct phy_driver dp83848_driver[] = { DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY"), DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY"), DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"), + DP83848_PHY_DRIVER(TI_DP83822_PHY_ID, "TI DP83822 10/100 Mbps PHY"), }; module_phy_driver(dp83848_driver); |