diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 6 | ||||
| -rw-r--r-- | drivers/net/phy/mdio_bus.c | 12 | ||||
| -rw-r--r-- | drivers/net/phy/microchip.c | 49 | ||||
| -rw-r--r-- | drivers/net/phy/mscc/mscc_ptp.c | 20 | ||||
| -rw-r--r-- | drivers/net/phy/nxp-c45-tja11xx.c | 122 | ||||
| -rw-r--r-- | drivers/net/phy/phy.c | 43 | ||||
| -rw-r--r-- | drivers/net/phy/phy_device.c | 69 | ||||
| -rw-r--r-- | drivers/net/phy/phy_led_triggers.c | 23 | ||||
| -rw-r--r-- | drivers/net/phy/phy_link_topology.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/phylink.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/at803x.c | 27 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qca808x.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qcom-phy-lib.c | 25 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qcom.h | 5 | ||||
| -rw-r--r-- | drivers/net/phy/realtek.c | 54 | ||||
| -rw-r--r-- | drivers/net/phy/sfp.c | 13 | ||||
| -rw-r--r-- | drivers/net/phy/smsc.c | 57 |
17 files changed, 398 insertions, 133 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index ddded162c44c..d2a9cf3fde5a 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -859,7 +859,7 @@ static int brcm_fet_config_init(struct phy_device *phydev) return reg; /* Unmask events we are interested in and mask interrupts globally. */ - if (phydev->phy_id == PHY_ID_BCM5221) + if (phydev->drv->phy_id == PHY_ID_BCM5221) reg = MII_BRCM_FET_IR_ENABLE | MII_BRCM_FET_IR_MASK; else @@ -888,7 +888,7 @@ static int brcm_fet_config_init(struct phy_device *phydev) return err; } - if (phydev->phy_id != PHY_ID_BCM5221) { + if (phydev->drv->phy_id != PHY_ID_BCM5221) { /* Set the LED mode */ reg = __phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4); if (reg < 0) { @@ -1009,7 +1009,7 @@ static int brcm_fet_suspend(struct phy_device *phydev) return err; } - if (phydev->phy_id == PHY_ID_BCM5221) + if (phydev->drv->phy_id == PHY_ID_BCM5221) /* Force Low Power Mode with clock enabled */ reg = BCM5221_SHDW_AM4_EN_CLK_LPM | BCM5221_SHDW_AM4_FORCE_LPM; else diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 7e2f10182c0c..591e8fd33d8e 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -889,6 +889,9 @@ int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum) lockdep_assert_held_once(&bus->mdio_lock); + if (addr >= PHY_MAX_ADDR) + return -ENXIO; + if (bus->read) retval = bus->read(bus, addr, regnum); else @@ -918,6 +921,9 @@ int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val) lockdep_assert_held_once(&bus->mdio_lock); + if (addr >= PHY_MAX_ADDR) + return -ENXIO; + if (bus->write) err = bus->write(bus, addr, regnum, val); else @@ -979,6 +985,9 @@ int __mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum) lockdep_assert_held_once(&bus->mdio_lock); + if (addr >= PHY_MAX_ADDR) + return -ENXIO; + if (bus->read_c45) retval = bus->read_c45(bus, addr, devad, regnum); else @@ -1010,6 +1019,9 @@ int __mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum, lockdep_assert_held_once(&bus->mdio_lock); + if (addr >= PHY_MAX_ADDR) + return -ENXIO; + if (bus->write_c45) err = bus->write_c45(bus, addr, devad, regnum, val); else diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c index 691969a4910f..ffca1cec4ec9 100644 --- a/drivers/net/phy/microchip.c +++ b/drivers/net/phy/microchip.c @@ -37,47 +37,6 @@ static int lan88xx_write_page(struct phy_device *phydev, int page) return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page); } -static int lan88xx_phy_config_intr(struct phy_device *phydev) -{ - int rc; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { - /* unmask all source and clear them before enable */ - rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF); - rc = phy_read(phydev, LAN88XX_INT_STS); - rc = phy_write(phydev, LAN88XX_INT_MASK, - LAN88XX_INT_MASK_MDINTPIN_EN_ | - LAN88XX_INT_MASK_LINK_CHANGE_); - } else { - rc = phy_write(phydev, LAN88XX_INT_MASK, 0); - if (rc) - return rc; - - /* Ack interrupts after they have been disabled */ - rc = phy_read(phydev, LAN88XX_INT_STS); - } - - return rc < 0 ? rc : 0; -} - -static irqreturn_t lan88xx_handle_interrupt(struct phy_device *phydev) -{ - int irq_status; - - irq_status = phy_read(phydev, LAN88XX_INT_STS); - if (irq_status < 0) { - phy_error(phydev); - return IRQ_NONE; - } - - if (!(irq_status & LAN88XX_INT_STS_LINK_CHANGE_)) - return IRQ_NONE; - - phy_trigger_machine(phydev); - - return IRQ_HANDLED; -} - static int lan88xx_suspend(struct phy_device *phydev) { struct lan88xx_priv *priv = phydev->priv; @@ -373,7 +332,7 @@ static void lan88xx_link_change_notify(struct phy_device *phydev) * As workaround, set to 10 before setting to 100 * at forced 100 F/H mode. */ - if (!phydev->autoneg && phydev->speed == 100) { + if (phydev->state == PHY_NOLINK && !phydev->autoneg && phydev->speed == 100) { /* disable phy interrupt */ temp = phy_read(phydev, LAN88XX_INT_MASK); temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_; @@ -527,9 +486,11 @@ static struct phy_driver microchip_phy_driver[] = { .config_init = lan88xx_config_init, .config_aneg = lan88xx_config_aneg, .link_change_notify = lan88xx_link_change_notify, + .soft_reset = genphy_soft_reset, - .config_intr = lan88xx_phy_config_intr, - .handle_interrupt = lan88xx_handle_interrupt, + /* Interrupt handling is broken, do not define related + * functions to force polling. + */ .suspend = lan88xx_suspend, .resume = genphy_resume, diff --git a/drivers/net/phy/mscc/mscc_ptp.c b/drivers/net/phy/mscc/mscc_ptp.c index 738a8822fcf0..ce49f3ac6939 100644 --- a/drivers/net/phy/mscc/mscc_ptp.c +++ b/drivers/net/phy/mscc/mscc_ptp.c @@ -943,7 +943,9 @@ static int vsc85xx_ip1_conf(struct phy_device *phydev, enum ts_blk blk, /* UDP checksum offset in IPv4 packet * according to: https://tools.ietf.org/html/rfc768 */ - val |= IP1_NXT_PROT_UDP_CHKSUM_OFF(26) | IP1_NXT_PROT_UDP_CHKSUM_CLEAR; + val |= IP1_NXT_PROT_UDP_CHKSUM_OFF(26); + if (enable) + val |= IP1_NXT_PROT_UDP_CHKSUM_CLEAR; vsc85xx_ts_write_csr(phydev, blk, MSCC_ANA_IP1_NXT_PROT_UDP_CHKSUM, val); @@ -1163,18 +1165,24 @@ static void vsc85xx_txtstamp(struct mii_timestamper *mii_ts, container_of(mii_ts, struct vsc8531_private, mii_ts); if (!vsc8531->ptp->configured) - return; + goto out; - if (vsc8531->ptp->tx_type == HWTSTAMP_TX_OFF) { - kfree_skb(skb); - return; - } + if (vsc8531->ptp->tx_type == HWTSTAMP_TX_OFF) + goto out; + + if (vsc8531->ptp->tx_type == HWTSTAMP_TX_ONESTEP_SYNC) + if (ptp_msg_is_sync(skb, type)) + goto out; skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; mutex_lock(&vsc8531->ts_lock); __skb_queue_tail(&vsc8531->ptp->tx_queue, skb); mutex_unlock(&vsc8531->ts_lock); + return; + +out: + kfree_skb(skb); } static bool vsc85xx_rxtstamp(struct mii_timestamper *mii_ts, diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c index ae43103c76cb..99a5eee77bec 100644 --- a/drivers/net/phy/nxp-c45-tja11xx.c +++ b/drivers/net/phy/nxp-c45-tja11xx.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* NXP C45 PHY driver - * Copyright 2021-2023 NXP + * Copyright 2021-2025 NXP * Author: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> */ @@ -18,9 +18,16 @@ #include "nxp-c45-tja11xx.h" +#define PHY_ID_MASK GENMASK(31, 4) +/* Same id: TJA1103, TJA1104 */ #define PHY_ID_TJA_1103 0x001BB010 #define PHY_ID_TJA_1120 0x001BB031 +#define VEND1_DEVICE_ID3 0x0004 +#define TJA1120_DEV_ID3_SILICON_VERSION GENMASK(15, 12) +#define TJA1120_DEV_ID3_SAMPLE_TYPE GENMASK(11, 8) +#define DEVICE_ID3_SAMPLE_TYPE_R 0x9 + #define VEND1_DEVICE_CONTROL 0x0040 #define DEVICE_CONTROL_RESET BIT(15) #define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14) @@ -108,6 +115,9 @@ #define MII_BASIC_CONFIG_RMII 0x5 #define MII_BASIC_CONFIG_MII 0x4 +#define VEND1_SGMII_BASIC_CONTROL 0xB000 +#define SGMII_LPM BIT(11) + #define VEND1_SYMBOL_ERROR_CNT_XTD 0x8351 #define EXTENDED_CNT_EN BIT(15) #define VEND1_MONITOR_STATUS 0xAC80 @@ -1583,6 +1593,63 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev) return 0; } +/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 & 3.2 */ +static void nxp_c45_tja1120_errata(struct phy_device *phydev) +{ + bool macsec_ability, sgmii_ability; + int silicon_version, sample_type; + int phy_abilities; + int ret = 0; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_ID3); + if (ret < 0) + return; + + sample_type = FIELD_GET(TJA1120_DEV_ID3_SAMPLE_TYPE, ret); + if (sample_type != DEVICE_ID3_SAMPLE_TYPE_R) + return; + + silicon_version = FIELD_GET(TJA1120_DEV_ID3_SILICON_VERSION, ret); + + phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1, + VEND1_PORT_ABILITIES); + macsec_ability = !!(phy_abilities & MACSEC_ABILITY); + sgmii_ability = !!(phy_abilities & SGMII_ABILITY); + if ((!macsec_ability && silicon_version == 2) || + (macsec_ability && silicon_version == 1)) { + /* TJA1120/TJA1121 PHY configuration errata workaround. + * Apply PHY writes sequence before link up. + */ + if (!macsec_ability) { + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x4b95); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0xf3cd); + } else { + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x89c7); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0893); + } + + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x0476, 0x58a0); + + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x8921, 0xa3a); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x89F1, 0x16c1); + + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0); + + if (sgmii_ability) { + /* TJA1120B/TJA1121B SGMII PCS restart errata workaround. + * Put SGMII PCS into power down mode and back up. + */ + phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, + VEND1_SGMII_BASIC_CONTROL, + SGMII_LPM); + phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + VEND1_SGMII_BASIC_CONTROL, + SGMII_LPM); + } + } +} + static int nxp_c45_config_init(struct phy_device *phydev) { int ret; @@ -1599,6 +1666,9 @@ static int nxp_c45_config_init(struct phy_device *phydev) phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 1); phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 2); + if (phy_id_compare(phydev->phy_id, PHY_ID_TJA_1120, GENMASK(31, 4))) + nxp_c45_tja1120_errata(phydev); + phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG, PHY_CONFIG_AUTO); @@ -1862,6 +1932,30 @@ static void tja1120_nmi_handler(struct phy_device *phydev, } } +static int nxp_c45_macsec_ability(struct phy_device *phydev) +{ + bool macsec_ability; + int phy_abilities; + + phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1, + VEND1_PORT_ABILITIES); + macsec_ability = !!(phy_abilities & MACSEC_ABILITY); + + return macsec_ability; +} + +static int tja1103_match_phy_device(struct phy_device *phydev) +{ + return phy_id_compare(phydev->phy_id, PHY_ID_TJA_1103, PHY_ID_MASK) && + !nxp_c45_macsec_ability(phydev); +} + +static int tja1104_match_phy_device(struct phy_device *phydev) +{ + return phy_id_compare(phydev->phy_id, PHY_ID_TJA_1103, PHY_ID_MASK) && + nxp_c45_macsec_ability(phydev); +} + static const struct nxp_c45_regmap tja1120_regmap = { .vend1_ptp_clk_period = 0x1020, .vend1_event_msg_filt = 0x9010, @@ -1932,7 +2026,6 @@ static const struct nxp_c45_phy_data tja1120_phy_data = { static struct phy_driver nxp_c45_driver[] = { { - PHY_ID_MATCH_MODEL(PHY_ID_TJA_1103), .name = "NXP C45 TJA1103", .get_features = nxp_c45_get_features, .driver_data = &tja1103_phy_data, @@ -1954,6 +2047,31 @@ static struct phy_driver nxp_c45_driver[] = { .get_sqi = nxp_c45_get_sqi, .get_sqi_max = nxp_c45_get_sqi_max, .remove = nxp_c45_remove, + .match_phy_device = tja1103_match_phy_device, + }, + { + .name = "NXP C45 TJA1104", + .get_features = nxp_c45_get_features, + .driver_data = &tja1103_phy_data, + .probe = nxp_c45_probe, + .soft_reset = nxp_c45_soft_reset, + .config_aneg = genphy_c45_config_aneg, + .config_init = nxp_c45_config_init, + .config_intr = tja1103_config_intr, + .handle_interrupt = nxp_c45_handle_interrupt, + .read_status = genphy_c45_read_status, + .suspend = genphy_c45_pma_suspend, + .resume = genphy_c45_pma_resume, + .get_sset_count = nxp_c45_get_sset_count, + .get_strings = nxp_c45_get_strings, + .get_stats = nxp_c45_get_stats, + .cable_test_start = nxp_c45_cable_test_start, + .cable_test_get_status = nxp_c45_cable_test_get_status, + .set_loopback = genphy_c45_loopback, + .get_sqi = nxp_c45_get_sqi, + .get_sqi_max = nxp_c45_get_sqi_max, + .remove = nxp_c45_remove, + .match_phy_device = tja1104_match_phy_device, }, { PHY_ID_MATCH_MODEL(PHY_ID_TJA_1120), diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 4f3e742907cb..c9cfdc33fc5f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -616,6 +616,49 @@ int phy_ethtool_get_stats(struct phy_device *phydev, EXPORT_SYMBOL(phy_ethtool_get_stats); /** + * __phy_ethtool_get_phy_stats - Retrieve standardized PHY statistics + * @phydev: Pointer to the PHY device + * @phy_stats: Pointer to ethtool_eth_phy_stats structure + * @phydev_stats: Pointer to ethtool_phy_stats structure + * + * Fetches PHY statistics using a kernel-defined interface for consistent + * diagnostics. Unlike phy_ethtool_get_stats(), which allows custom stats, + * this function enforces a standardized format for better interoperability. + */ +void __phy_ethtool_get_phy_stats(struct phy_device *phydev, + struct ethtool_eth_phy_stats *phy_stats, + struct ethtool_phy_stats *phydev_stats) +{ + if (!phydev->drv || !phydev->drv->get_phy_stats) + return; + + mutex_lock(&phydev->lock); + phydev->drv->get_phy_stats(phydev, phy_stats, phydev_stats); + mutex_unlock(&phydev->lock); +} + +/** + * __phy_ethtool_get_link_ext_stats - Retrieve extended link statistics for a PHY + * @phydev: Pointer to the PHY device + * @link_stats: Pointer to the structure to store extended link statistics + * + * Populates the ethtool_link_ext_stats structure with link down event counts + * and additional driver-specific link statistics, if available. + */ +void __phy_ethtool_get_link_ext_stats(struct phy_device *phydev, + struct ethtool_link_ext_stats *link_stats) +{ + link_stats->link_down_events = READ_ONCE(phydev->link_down_events); + + if (!phydev->drv || !phydev->drv->get_link_stats) + return; + + mutex_lock(&phydev->lock); + phydev->drv->get_link_stats(phydev, link_stats); + mutex_unlock(&phydev->lock); +} + +/** * phy_ethtool_get_plca_cfg - Get PLCA RS configuration * @phydev: the phy_device struct * @plca_cfg: where to store the retrieved configuration diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 499797646580..834624a61060 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -289,6 +289,46 @@ static bool phy_drv_wol_enabled(struct phy_device *phydev) return wol.wolopts != 0; } +static void phy_link_change(struct phy_device *phydev, bool up) +{ + struct net_device *netdev = phydev->attached_dev; + + if (up) + netif_carrier_on(netdev); + else + netif_carrier_off(netdev); + phydev->adjust_link(netdev); + if (phydev->mii_ts && phydev->mii_ts->link_state) + phydev->mii_ts->link_state(phydev->mii_ts, phydev); +} + +/** + * phy_uses_state_machine - test whether consumer driver uses PAL state machine + * @phydev: the target PHY device structure + * + * Ultimately, this aims to indirectly determine whether the PHY is attached + * to a consumer which uses the state machine by calling phy_start() and + * phy_stop(). + * + * When the PHY driver consumer uses phylib, it must have previously called + * phy_connect_direct() or one of its derivatives, so that phy_prepare_link() + * has set up a hook for monitoring state changes. + * + * When the PHY driver is used by the MAC driver consumer through phylink (the + * only other provider of a phy_link_change() method), using the PHY state + * machine is not optional. + * + * Return: true if consumer calls phy_start() and phy_stop(), false otherwise. + */ +static bool phy_uses_state_machine(struct phy_device *phydev) +{ + if (phydev->phy_link_change == phy_link_change) + return phydev->attached_dev && phydev->adjust_link; + + /* phydev->phy_link_change is implicitly phylink_phy_change() */ + return true; +} + static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) { struct device_driver *drv = phydev->mdio.dev.driver; @@ -355,7 +395,7 @@ static __maybe_unused int mdio_bus_phy_suspend(struct device *dev) * may call phy routines that try to grab the same lock, and that may * lead to a deadlock. */ - if (phydev->attached_dev && phydev->adjust_link) + if (phy_uses_state_machine(phydev)) phy_stop_machine(phydev); if (!mdio_bus_phy_may_suspend(phydev)) @@ -409,7 +449,7 @@ no_resume: } } - if (phydev->attached_dev && phydev->adjust_link) + if (phy_uses_state_machine(phydev)) phy_start_machine(phydev); return 0; @@ -1101,19 +1141,6 @@ struct phy_device *phy_find_first(struct mii_bus *bus) } EXPORT_SYMBOL(phy_find_first); -static void phy_link_change(struct phy_device *phydev, bool up) -{ - struct net_device *netdev = phydev->attached_dev; - - if (up) - netif_carrier_on(netdev); - else - netif_carrier_off(netdev); - phydev->adjust_link(netdev); - if (phydev->mii_ts && phydev->mii_ts->link_state) - phydev->mii_ts->link_state(phydev->mii_ts, phydev); -} - /** * phy_prepare_link - prepares the PHY layer to monitor link status * @phydev: target phy_device struct @@ -1983,8 +2010,10 @@ void phy_detach(struct phy_device *phydev) struct module *ndev_owner = NULL; struct mii_bus *bus; - if (phydev->devlink) + if (phydev->devlink) { device_link_del(phydev->devlink); + phydev->devlink = NULL; + } if (phydev->sysfs_links) { if (dev) @@ -3634,7 +3663,8 @@ static int phy_probe(struct device *dev) /* Get the LEDs from the device tree, and instantiate standard * LEDs for them. */ - if (IS_ENABLED(CONFIG_PHYLIB_LEDS)) + if (IS_ENABLED(CONFIG_PHYLIB_LEDS) && !phy_driver_is_genphy(phydev) && + !phy_driver_is_genphy_10g(phydev)) err = of_phy_leds(phydev); out: @@ -3651,7 +3681,8 @@ static int phy_remove(struct device *dev) cancel_delayed_work_sync(&phydev->state_queue); - if (IS_ENABLED(CONFIG_PHYLIB_LEDS)) + if (IS_ENABLED(CONFIG_PHYLIB_LEDS) && !phy_driver_is_genphy(phydev) && + !phy_driver_is_genphy_10g(phydev)) phy_leds_unregister(phydev); phydev->state = PHY_DOWN; @@ -3776,6 +3807,8 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = { static const struct phylib_stubs __phylib_stubs = { .hwtstamp_get = __phy_hwtstamp_get, .hwtstamp_set = __phy_hwtstamp_set, + .get_phy_stats = __phy_ethtool_get_phy_stats, + .get_link_ext_stats = __phy_ethtool_get_link_ext_stats, }; static void phylib_register_stubs(void) diff --git a/drivers/net/phy/phy_led_triggers.c b/drivers/net/phy/phy_led_triggers.c index f550576eb9da..6f9d8da76c4d 100644 --- a/drivers/net/phy/phy_led_triggers.c +++ b/drivers/net/phy/phy_led_triggers.c @@ -91,9 +91,8 @@ int phy_led_triggers_register(struct phy_device *phy) if (!phy->phy_num_led_triggers) return 0; - phy->led_link_trigger = devm_kzalloc(&phy->mdio.dev, - sizeof(*phy->led_link_trigger), - GFP_KERNEL); + phy->led_link_trigger = kzalloc(sizeof(*phy->led_link_trigger), + GFP_KERNEL); if (!phy->led_link_trigger) { err = -ENOMEM; goto out_clear; @@ -103,10 +102,9 @@ int phy_led_triggers_register(struct phy_device *phy) if (err) goto out_free_link; - phy->phy_led_triggers = devm_kcalloc(&phy->mdio.dev, - phy->phy_num_led_triggers, - sizeof(struct phy_led_trigger), - GFP_KERNEL); + phy->phy_led_triggers = kcalloc(phy->phy_num_led_triggers, + sizeof(struct phy_led_trigger), + GFP_KERNEL); if (!phy->phy_led_triggers) { err = -ENOMEM; goto out_unreg_link; @@ -127,11 +125,11 @@ int phy_led_triggers_register(struct phy_device *phy) out_unreg: while (i--) phy_led_trigger_unregister(&phy->phy_led_triggers[i]); - devm_kfree(&phy->mdio.dev, phy->phy_led_triggers); + kfree(phy->phy_led_triggers); out_unreg_link: phy_led_trigger_unregister(phy->led_link_trigger); out_free_link: - devm_kfree(&phy->mdio.dev, phy->led_link_trigger); + kfree(phy->led_link_trigger); phy->led_link_trigger = NULL; out_clear: phy->phy_num_led_triggers = 0; @@ -145,8 +143,13 @@ void phy_led_triggers_unregister(struct phy_device *phy) for (i = 0; i < phy->phy_num_led_triggers; i++) phy_led_trigger_unregister(&phy->phy_led_triggers[i]); + kfree(phy->phy_led_triggers); + phy->phy_led_triggers = NULL; - if (phy->led_link_trigger) + if (phy->led_link_trigger) { phy_led_trigger_unregister(phy->led_link_trigger); + kfree(phy->led_link_trigger); + phy->led_link_trigger = NULL; + } } EXPORT_SYMBOL_GPL(phy_led_triggers_unregister); diff --git a/drivers/net/phy/phy_link_topology.c b/drivers/net/phy/phy_link_topology.c index 4a5d73002a1a..0e9e987f37dd 100644 --- a/drivers/net/phy/phy_link_topology.c +++ b/drivers/net/phy/phy_link_topology.c @@ -73,7 +73,7 @@ int phy_link_topo_add_phy(struct net_device *dev, xa_limit_32b, &topo->next_phy_index, GFP_KERNEL); - if (ret) + if (ret < 0) goto err; return 0; diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 3e9957b6aa14..b78dfcbec936 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1811,7 +1811,7 @@ bool phylink_expects_phy(struct phylink *pl) { if (pl->cfg_link_an_mode == MLO_AN_FIXED || (pl->cfg_link_an_mode == MLO_AN_INBAND && - phy_interface_mode_is_8023z(pl->link_config.interface))) + phy_interface_mode_is_8023z(pl->link_interface))) return false; return true; } diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c index 105602581a03..ac909ad8a87b 100644 --- a/drivers/net/phy/qcom/at803x.c +++ b/drivers/net/phy/qcom/at803x.c @@ -26,9 +26,6 @@ #define AT803X_LED_CONTROL 0x18 -#define AT803X_PHY_MMD3_WOL_CTRL 0x8012 -#define AT803X_WOL_EN BIT(5) - #define AT803X_REG_CHIP_CONFIG 0x1f #define AT803X_BT_BX_REG_SEL 0x8000 @@ -866,30 +863,6 @@ static int at8031_config_init(struct phy_device *phydev) return at803x_config_init(phydev); } -static int at8031_set_wol(struct phy_device *phydev, - struct ethtool_wolinfo *wol) -{ - int ret; - - /* First setup MAC address and enable WOL interrupt */ - ret = at803x_set_wol(phydev, wol); - if (ret) - return ret; - - if (wol->wolopts & WAKE_MAGIC) - /* Enable WOL function for 1588 */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - 0, AT803X_WOL_EN); - else - /* Disable WoL function for 1588 */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); - - return ret; -} - static int at8031_config_intr(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c index 5048304ccc9e..c3aad0e6b700 100644 --- a/drivers/net/phy/qcom/qca808x.c +++ b/drivers/net/phy/qcom/qca808x.c @@ -633,7 +633,7 @@ static struct phy_driver qca808x_driver[] = { .handle_interrupt = at803x_handle_interrupt, .get_tunable = at803x_get_tunable, .set_tunable = at803x_set_tunable, - .set_wol = at803x_set_wol, + .set_wol = at8031_set_wol, .get_wol = at803x_get_wol, .get_features = qca808x_get_features, .config_aneg = qca808x_config_aneg, diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c index d28815ef56bb..af7d0d8e81be 100644 --- a/drivers/net/phy/qcom/qcom-phy-lib.c +++ b/drivers/net/phy/qcom/qcom-phy-lib.c @@ -115,6 +115,31 @@ int at803x_set_wol(struct phy_device *phydev, } EXPORT_SYMBOL_GPL(at803x_set_wol); +int at8031_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int ret; + + /* First setup MAC address and enable WOL interrupt */ + ret = at803x_set_wol(phydev, wol); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + /* Enable WOL function for 1588 */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + 0, AT803X_WOL_EN); + else + /* Disable WoL function for 1588 */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); + + return ret; +} +EXPORT_SYMBOL_GPL(at8031_set_wol); + void at803x_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h index 4bb541728846..7f7151c8baca 100644 --- a/drivers/net/phy/qcom/qcom.h +++ b/drivers/net/phy/qcom/qcom.h @@ -172,6 +172,9 @@ #define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B #define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A +#define AT803X_PHY_MMD3_WOL_CTRL 0x8012 +#define AT803X_WOL_EN BIT(5) + #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E @@ -215,6 +218,8 @@ int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data); int at803x_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); +int at8031_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol); void at803x_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); int at803x_ack_interrupt(struct phy_device *phydev); diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 166f6a728373..8ce5705af69c 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -92,6 +92,7 @@ #define RTL_GENERIC_PHYID 0x001cc800 #define RTL_8211FVD_PHYID 0x001cc878 +#define RTL_8221B 0x001cc840 #define RTL_8221B_VB_CG 0x001cc849 #define RTL_8221B_VN_CG 0x001cc84a #define RTL_8251B 0x001cc862 @@ -1040,6 +1041,23 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev) return val >= 0 && val & MDIO_PMA_SPEED_2_5G; } +/* On internal PHY's MMD reads over C22 always return 0. + * Check a MMD register which is known to be non-zero. + */ +static bool rtlgen_supports_mmd(struct phy_device *phydev) +{ + int val; + + phy_lock_mdio_bus(phydev); + __phy_write(phydev, MII_MMD_CTRL, MDIO_MMD_PCS); + __phy_write(phydev, MII_MMD_DATA, MDIO_PCS_EEE_ABLE); + __phy_write(phydev, MII_MMD_CTRL, MDIO_MMD_PCS | MII_MMD_CTRL_NOINCR); + val = __phy_read(phydev, MII_MMD_DATA); + phy_unlock_mdio_bus(phydev); + + return val > 0; +} + static int rtlgen_match_phy_device(struct phy_device *phydev) { return phydev->phy_id == RTL_GENERIC_PHYID && @@ -1049,7 +1067,8 @@ static int rtlgen_match_phy_device(struct phy_device *phydev) static int rtl8226_match_phy_device(struct phy_device *phydev) { return phydev->phy_id == RTL_GENERIC_PHYID && - rtlgen_supports_2_5gbps(phydev); + rtlgen_supports_2_5gbps(phydev) && + rtlgen_supports_mmd(phydev); } static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id, @@ -1061,6 +1080,11 @@ static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id, return !is_c45 && (id == phydev->phy_id); } +static int rtl8221b_match_phy_device(struct phy_device *phydev) +{ + return phydev->phy_id == RTL_8221B && rtlgen_supports_mmd(phydev); +} + static int rtl8221b_vb_cg_c22_match_phy_device(struct phy_device *phydev) { return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false); @@ -1081,9 +1105,22 @@ static int rtl8221b_vn_cg_c45_match_phy_device(struct phy_device *phydev) return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true); } -static int rtl8251b_c22_match_phy_device(struct phy_device *phydev) +static int rtl_internal_nbaset_match_phy_device(struct phy_device *phydev) { - return rtlgen_is_c45_match(phydev, RTL_8251B, false); + if (phydev->is_c45) + return false; + + switch (phydev->phy_id) { + case RTL_GENERIC_PHYID: + case RTL_8221B: + case RTL_8251B: + case 0x001cc841: + break; + default: + return false; + } + + return rtlgen_supports_2_5gbps(phydev) && !rtlgen_supports_mmd(phydev); } static int rtl8251b_c45_match_phy_device(struct phy_device *phydev) @@ -1345,10 +1382,8 @@ static struct phy_driver realtek_drvs[] = { .resume = rtlgen_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, - .read_mmd = rtl822x_read_mmd, - .write_mmd = rtl822x_write_mmd, }, { - PHY_ID_MATCH_EXACT(0x001cc840), + .match_phy_device = rtl8221b_match_phy_device, .name = "RTL8226B_RTL8221B 2.5Gbps PHY", .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, @@ -1359,8 +1394,6 @@ static struct phy_driver realtek_drvs[] = { .resume = rtlgen_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, - .read_mmd = rtl822x_read_mmd, - .write_mmd = rtl822x_write_mmd, }, { PHY_ID_MATCH_EXACT(0x001cc838), .name = "RTL8226-CG 2.5Gbps PHY", @@ -1438,8 +1471,9 @@ static struct phy_driver realtek_drvs[] = { .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, }, { - .match_phy_device = rtl8251b_c22_match_phy_device, - .name = "RTL8126A-internal 5Gbps PHY", + .match_phy_device = rtl_internal_nbaset_match_phy_device, + .name = "Realtek Internal NBASE-T PHY", + .flags = PHY_IS_INTERNAL, .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .read_status = rtl822x_read_status, diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index dcec92625cf6..7b33993f7001 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -385,7 +385,7 @@ static void sfp_fixup_rollball(struct sfp *sfp) sfp->phy_t_retry = msecs_to_jiffies(1000); } -static void sfp_fixup_fs_2_5gt(struct sfp *sfp) +static void sfp_fixup_rollball_wait4s(struct sfp *sfp) { sfp_fixup_rollball(sfp); @@ -399,7 +399,7 @@ static void sfp_fixup_fs_2_5gt(struct sfp *sfp) static void sfp_fixup_fs_10gt(struct sfp *sfp) { sfp_fixup_10gbaset_30m(sfp); - sfp_fixup_fs_2_5gt(sfp); + sfp_fixup_rollball_wait4s(sfp); } static void sfp_fixup_halny_gsfp(struct sfp *sfp) @@ -479,9 +479,10 @@ static const struct sfp_quirk sfp_quirks[] = { // PHY. SFP_QUIRK_F("FS", "SFP-10G-T", sfp_fixup_fs_10gt), - // Fiberstore SFP-2.5G-T uses Rollball protocol to talk to the PHY and - // needs 4 sec wait before probing the PHY. - SFP_QUIRK_F("FS", "SFP-2.5G-T", sfp_fixup_fs_2_5gt), + // Fiberstore SFP-2.5G-T and SFP-10GM-T uses Rollball protocol to talk + // to the PHY and needs 4 sec wait before probing the PHY. + SFP_QUIRK_F("FS", "SFP-2.5G-T", sfp_fixup_rollball_wait4s), + SFP_QUIRK_F("FS", "SFP-10GM-T", sfp_fixup_rollball_wait4s), // Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd // NRZ in their EEPROM @@ -515,6 +516,8 @@ static const struct sfp_quirk sfp_quirks[] = { SFP_QUIRK_F("OEM", "SFP-10G-T", sfp_fixup_rollball_cc), SFP_QUIRK_M("OEM", "SFP-2.5G-T", sfp_quirk_oem_2_5g), + SFP_QUIRK_M("OEM", "SFP-2.5G-BX10-D", sfp_quirk_2500basex), + SFP_QUIRK_M("OEM", "SFP-2.5G-BX10-U", sfp_quirk_2500basex), SFP_QUIRK_F("OEM", "RTSFP-10", sfp_fixup_rollball_cc), SFP_QUIRK_F("OEM", "RTSFP-10G", sfp_fixup_rollball_cc), SFP_QUIRK_F("Turris", "RTSFP-2.5G", sfp_fixup_rollball), diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 150aea7c9c36..6a43f6d6e85c 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -155,10 +155,29 @@ static int smsc_phy_reset(struct phy_device *phydev) static int lan87xx_config_aneg(struct phy_device *phydev) { - int rc; + u8 mdix_ctrl; int val; + int rc; + + /* When auto-negotiation is disabled (forced mode), the PHY's + * Auto-MDIX will continue toggling the TX/RX pairs. + * + * To establish a stable link, we must select a fixed MDI mode. + * If the user has not specified a fixed MDI mode (i.e., mdix_ctrl is + * 'auto'), we default to ETH_TP_MDI. This choice of a ETH_TP_MDI mode + * mirrors the behavior the hardware would exhibit if the AUTOMDIX_EN + * strap were configured for a fixed MDI connection. + */ + if (phydev->autoneg == AUTONEG_DISABLE) { + if (phydev->mdix_ctrl == ETH_TP_MDI_AUTO) + mdix_ctrl = ETH_TP_MDI; + else + mdix_ctrl = phydev->mdix_ctrl; + } else { + mdix_ctrl = phydev->mdix_ctrl; + } - switch (phydev->mdix_ctrl) { + switch (mdix_ctrl) { case ETH_TP_MDI: val = SPECIAL_CTRL_STS_OVRRD_AMDIX_; break; @@ -167,7 +186,8 @@ static int lan87xx_config_aneg(struct phy_device *phydev) SPECIAL_CTRL_STS_AMDIX_STATE_; break; case ETH_TP_MDI_AUTO: - val = SPECIAL_CTRL_STS_AMDIX_ENABLE_; + val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ | + SPECIAL_CTRL_STS_AMDIX_ENABLE_; break; default: return genphy_config_aneg(phydev); @@ -183,7 +203,7 @@ static int lan87xx_config_aneg(struct phy_device *phydev) rc |= val; phy_write(phydev, SPECIAL_CTRL_STS, rc); - phydev->mdix = phydev->mdix_ctrl; + phydev->mdix = mdix_ctrl; return genphy_config_aneg(phydev); } @@ -261,6 +281,33 @@ int lan87xx_read_status(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(lan87xx_read_status); +static int lan87xx_phy_config_init(struct phy_device *phydev) +{ + int rc; + + /* The LAN87xx PHY's initial MDI-X mode is determined by the AUTOMDIX_EN + * hardware strap, but the driver cannot read the strap's status. This + * creates an unpredictable initial state. + * + * To ensure consistent and reliable behavior across all boards, + * override the strap configuration on initialization and force the PHY + * into a known state with Auto-MDIX enabled, which is the expected + * default for modern hardware. + */ + rc = phy_modify(phydev, SPECIAL_CTRL_STS, + SPECIAL_CTRL_STS_OVRRD_AMDIX_ | + SPECIAL_CTRL_STS_AMDIX_ENABLE_ | + SPECIAL_CTRL_STS_AMDIX_STATE_, + SPECIAL_CTRL_STS_OVRRD_AMDIX_ | + SPECIAL_CTRL_STS_AMDIX_ENABLE_); + if (rc < 0) + return rc; + + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + + return smsc_phy_config_init(phydev); +} + static int lan874x_phy_config_init(struct phy_device *phydev) { u16 val; @@ -694,7 +741,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .read_status = lan87xx_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan87xx_phy_config_init, .soft_reset = smsc_phy_reset, .config_aneg = lan87xx_config_aneg, |