diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 76 |
1 files changed, 72 insertions, 4 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 821e85a97367..11be60333fa8 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -8,6 +8,7 @@ * Copyright (c) 2004 Freescale Semiconductor, Inc. */ #include <linux/bitops.h> +#include <linux/of.h> #include <linux/phy.h> #include <linux/module.h> #include <linux/delay.h> @@ -27,6 +28,7 @@ #define RTL821x_PAGE_SELECT 0x1f #define RTL8211F_PHYCR1 0x18 +#define RTL8211F_PHYCR2 0x19 #define RTL8211F_INSR 0x1d #define RTL8211F_TX_DELAY BIT(8) @@ -40,6 +42,8 @@ #define RTL8211E_TX_DELAY BIT(12) #define RTL8211E_RX_DELAY BIT(11) +#define RTL8211F_CLKOUT_EN BIT(0) + #define RTL8201F_ISR 0x1e #define RTL8201F_ISR_ANERR BIT(15) #define RTL8201F_ISR_DUPLEX BIT(13) @@ -71,6 +75,11 @@ MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); +struct rtl821x_priv { + u16 phycr1; + u16 phycr2; +}; + static int rtl821x_read_page(struct phy_device *phydev) { return __phy_read(phydev, RTL821x_PAGE_SELECT); @@ -81,6 +90,37 @@ static int rtl821x_write_page(struct phy_device *phydev, int page) return __phy_write(phydev, RTL821x_PAGE_SELECT, page); } +static int rtl821x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct rtl821x_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1); + if (ret < 0) + return ret; + + priv->phycr1 = ret & (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF); + if (of_property_read_bool(dev->of_node, "realtek,aldps-enable")) + priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF; + + ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2); + if (ret < 0) + return ret; + + priv->phycr2 = ret & RTL8211F_CLKOUT_EN; + if (of_property_read_bool(dev->of_node, "realtek,clkout-disable")) + priv->phycr2 &= ~RTL8211F_CLKOUT_EN; + + phydev->priv = priv; + + return 0; +} + static int rtl8201_ack_interrupt(struct phy_device *phydev) { int err; @@ -291,13 +331,19 @@ static int rtl8211c_config_init(struct phy_device *phydev) static int rtl8211f_config_init(struct phy_device *phydev) { + struct rtl821x_priv *priv = phydev->priv; struct device *dev = &phydev->mdio.dev; u16 val_txdly, val_rxdly; - u16 val; int ret; - val = RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_XTAL_OFF; - phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, val, val); + ret = phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, + RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF, + priv->phycr1); + if (ret < 0) { + dev_err(dev, "aldps mode configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: @@ -354,6 +400,27 @@ static int rtl8211f_config_init(struct phy_device *phydev) val_rxdly ? "enabled" : "disabled"); } + ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2, + RTL8211F_CLKOUT_EN, priv->phycr2); + if (ret < 0) { + dev_err(dev, "clkout configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + + return genphy_soft_reset(phydev); +} + +static int rtl821x_resume(struct phy_device *phydev) +{ + int ret; + + ret = genphy_resume(phydev); + if (ret < 0) + return ret; + + msleep(20); + return 0; } @@ -847,12 +914,13 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc916), .name = "RTL8211F Gigabit Ethernet", + .probe = rtl821x_probe, .config_init = &rtl8211f_config_init, .read_status = rtlgen_read_status, .config_intr = &rtl8211f_config_intr, .handle_interrupt = rtl8211f_handle_interrupt, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = rtl821x_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, }, { |