diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 31 |
1 files changed, 16 insertions, 15 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 95dbe5e8e1d8..0f0960971800 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0+ -/* - * drivers/net/phy/realtek.c +/* drivers/net/phy/realtek.c * * Driver for Realtek PHYs * @@ -32,9 +31,9 @@ #define RTL8211F_TX_DELAY BIT(8) #define RTL8211F_RX_DELAY BIT(3) -#define RTL8211E_TX_DELAY BIT(1) -#define RTL8211E_RX_DELAY BIT(2) -#define RTL8211E_MODE_MII_GMII BIT(3) +#define RTL8211E_CTRL_DELAY BIT(13) +#define RTL8211E_TX_DELAY BIT(12) +#define RTL8211E_RX_DELAY BIT(11) #define RTL8201F_ISR 0x1e #define RTL8201F_IER 0x13 @@ -246,16 +245,16 @@ static int rtl8211e_config_init(struct phy_device *phydev) /* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */ switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: - val = 0; + val = RTL8211E_CTRL_DELAY | 0; break; case PHY_INTERFACE_MODE_RGMII_ID: - val = RTL8211E_TX_DELAY | RTL8211E_RX_DELAY; + val = RTL8211E_CTRL_DELAY | RTL8211E_TX_DELAY | RTL8211E_RX_DELAY; break; case PHY_INTERFACE_MODE_RGMII_RXID: - val = RTL8211E_RX_DELAY; + val = RTL8211E_CTRL_DELAY | RTL8211E_RX_DELAY; break; case PHY_INTERFACE_MODE_RGMII_TXID: - val = RTL8211E_TX_DELAY; + val = RTL8211E_CTRL_DELAY | RTL8211E_TX_DELAY; break; default: /* the rest of the modes imply leaving delays as is. */ return 0; @@ -263,11 +262,12 @@ static int rtl8211e_config_init(struct phy_device *phydev) /* According to a sample driver there is a 0x1c config register on the * 0xa4 extension page (0x7) layout. It can be used to disable/enable - * the RX/TX delays otherwise controlled by RXDLY/TXDLY pins. It can - * also be used to customize the whole configuration register: - * 8:6 = PHY Address, 5:4 = Auto-Negotiation, 3 = Interface Mode Select, - * 2 = RX Delay, 1 = TX Delay, 0 = SELRGV (see original PHY datasheet - * for details). + * the RX/TX delays otherwise controlled by RXDLY/TXDLY pins. + * The configuration register definition: + * 14 = reserved + * 13 = Force Tx RX Delay controlled by bit12 bit11, + * 12 = RX Delay, 11 = TX Delay + * 10:0 = Test && debug settings reserved by realtek */ oldpage = phy_select_page(phydev, 0x7); if (oldpage < 0) @@ -277,7 +277,8 @@ static int rtl8211e_config_init(struct phy_device *phydev) if (ret) goto err_restore_page; - ret = __phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY, + ret = __phy_modify(phydev, 0x1c, RTL8211E_CTRL_DELAY + | RTL8211E_TX_DELAY | RTL8211E_RX_DELAY, val); err_restore_page: |