diff options
Diffstat (limited to 'drivers/net/phy/phylink.c')
-rw-r--r-- | drivers/net/phy/phylink.c | 113 |
1 files changed, 62 insertions, 51 deletions
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index a5a57ca94c1a..9a616d6bc4eb 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -87,8 +87,24 @@ struct phylink { phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__) #define phylink_info(pl, fmt, ...) \ phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__) +#if defined(CONFIG_DYNAMIC_DEBUG) #define phylink_dbg(pl, fmt, ...) \ +do { \ + if ((pl)->config->type == PHYLINK_NETDEV) \ + netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \ + else if ((pl)->config->type == PHYLINK_DEV) \ + dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \ +} while (0) +#elif defined(DEBUG) +#define phylink_dbg(pl, fmt, ...) \ phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__) +#else +#define phylink_dbg(pl, fmt, ...) \ +({ \ + if (0) \ + phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \ +}) +#endif /** * phylink_set_port_modes() - set the port type modes in the ethtool mask @@ -117,9 +133,7 @@ static int phylink_is_empty_linkmode(const unsigned long *linkmode) phylink_set(tmp, Pause); phylink_set(tmp, Asym_Pause); - bitmap_andnot(tmp, linkmode, tmp, __ETHTOOL_LINK_MODE_MASK_NBITS); - - return linkmode_empty(tmp); + return linkmode_subset(linkmode, tmp); } static const char *phylink_an_mode_str(unsigned int mode) @@ -343,9 +357,9 @@ static void phylink_mac_an_restart(struct phylink *pl) pl->ops->mac_an_restart(pl->config); } -static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state) +static void phylink_mac_pcs_get_state(struct phylink *pl, + struct phylink_link_state *state) { - linkmode_copy(state->advertising, pl->link_config.advertising); linkmode_zero(state->lp_advertising); state->interface = pl->link_config.interface; @@ -356,7 +370,7 @@ static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state * state->an_complete = 0; state->link = 1; - return pl->ops->mac_link_state(pl->config, state); + pl->ops->mac_pcs_get_state(pl->config, state); } /* The fixed state is... fixed except for the link state, @@ -479,7 +493,7 @@ static void phylink_resolve(struct work_struct *w) break; case MLO_AN_INBAND: - phylink_get_mac_state(pl, &link_state); + phylink_mac_pcs_get_state(pl, &link_state); /* If we have a phy, the "up" state is the union of * both the PHY and the MAC */ @@ -550,33 +564,27 @@ static const struct sfp_upstream_ops sfp_phylink_ops; static int phylink_register_sfp(struct phylink *pl, struct fwnode_handle *fwnode) { - struct fwnode_reference_args ref; + struct sfp_bus *bus; int ret; - if (!fwnode) - return 0; - - ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL, - 0, 0, &ref); - if (ret < 0) { - if (ret == -ENOENT) - return 0; - - phylink_err(pl, "unable to parse \"sfp\" node: %d\n", - ret); + bus = sfp_bus_find_fwnode(fwnode); + if (IS_ERR(bus)) { + ret = PTR_ERR(bus); + phylink_err(pl, "unable to attach SFP bus: %d\n", ret); return ret; } - pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops); - if (!pl->sfp_bus) - return -ENOMEM; + pl->sfp_bus = bus; - return 0; + ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops); + sfp_bus_put(bus); + + return ret; } /** * phylink_create() - create a phylink instance - * @ndev: a pointer to the &struct net_device + * @config: a pointer to the target &struct phylink_config * @fwnode: a pointer to a &struct fwnode_handle describing the network * interface * @iface: the desired link mode defined by &typedef phy_interface_t @@ -585,6 +593,8 @@ static int phylink_register_sfp(struct phylink *pl, * Create a new phylink instance, and parse the link parameters found in @np. * This will parse in-band modes, fixed-link or SFP configuration. * + * Note: the rtnl lock must not be held when calling this function. + * * Returns a pointer to a &struct phylink, or an error-pointer value. Users * must use IS_ERR() to check for errors from this function. */ @@ -662,11 +672,12 @@ EXPORT_SYMBOL_GPL(phylink_create); * * Destroy a phylink instance. Any PHY that has been attached must have been * cleaned up via phylink_disconnect_phy() prior to calling this function. + * + * Note: the rtnl lock must not be held when calling this function. */ void phylink_destroy(struct phylink *pl) { - if (pl->sfp_bus) - sfp_unregister_upstream(pl->sfp_bus); + sfp_bus_del_upstream(pl->sfp_bus); if (pl->link_gpio) gpiod_put(pl->link_gpio); @@ -706,11 +717,6 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); int ret; - memset(&config, 0, sizeof(config)); - linkmode_copy(supported, phy->supported); - linkmode_copy(config.advertising, phy->advertising); - config.interface = pl->link_config.interface; - /* * This is the new way of dealing with flow control for PHYs, * as described by Timur Tabi in commit 529ed1275263 ("net: phy: @@ -718,10 +724,12 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) * using our validate call to the MAC, we rely upon the MAC * clearing the bits from both supported and advertising fields. */ - if (phylink_test(supported, Pause)) - phylink_set(config.advertising, Pause); - if (phylink_test(supported, Asym_Pause)) - phylink_set(config.advertising, Asym_Pause); + phy_support_asym_pause(phy); + + memset(&config, 0, sizeof(config)); + linkmode_copy(supported, phy->supported); + linkmode_copy(config.advertising, phy->advertising); + config.interface = pl->link_config.interface; ret = phylink_validate(pl, supported, &config); if (ret) @@ -1134,7 +1142,7 @@ int phylink_ethtool_ksettings_get(struct phylink *pl, if (pl->phydev) break; - phylink_get_mac_state(pl, &link_state); + phylink_mac_pcs_get_state(pl, &link_state); /* The MAC is reporting the link results from its own PCS * layer via in-band status. Report these as the current @@ -1238,7 +1246,13 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, pl->link_config.duplex = our_kset.base.duplex; pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE; - if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { + /* If we have a PHY, phylib will call our link state function if the + * mode has changed, which will trigger a resolve and update the MAC + * configuration. For a fixed link, this isn't able to change any + * parameters, which just leaves inband mode. + */ + if (pl->link_an_mode == MLO_AN_INBAND && + !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { phylink_mac_config(pl, &pl->link_config); phylink_mac_an_restart(pl); } @@ -1318,15 +1332,16 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, if (pause->tx_pause) config->pause |= MLO_PAUSE_TX; - if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { + /* If we have a PHY, phylib will call our link state function if the + * mode has changed, which will trigger a resolve and update the MAC + * configuration. + */ + if (pl->phydev) { + phy_set_asym_pause(pl->phydev, pause->rx_pause, + pause->tx_pause); + } else if (!test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) { switch (pl->link_an_mode) { - case MLO_AN_PHY: - /* Silently mark the carrier down, and then trigger a resolve */ - if (pl->netdev) - netif_carrier_off(pl->netdev); - phylink_run_resolve(pl); - break; - case MLO_AN_FIXED: /* Should we allow fixed links to change against the config? */ phylink_resolve_flow(pl, config); @@ -1546,10 +1561,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, case MLO_AN_INBAND: if (phy_id == 0) { - val = phylink_get_mac_state(pl, &state); - if (val < 0) - return val; - + phylink_mac_pcs_get_state(pl, &state); val = phylink_mii_emul_read(reg, &state); } break; @@ -1728,8 +1740,7 @@ static int phylink_sfp_module_insert(void *upstream, if (phy_interface_mode_is_8023z(iface) && pl->phydev) return -EINVAL; - changed = !bitmap_equal(pl->supported, support, - __ETHTOOL_LINK_MODE_MASK_NBITS); + changed = !linkmode_equal(pl->supported, support); if (changed) { linkmode_copy(pl->supported, support); linkmode_copy(pl->link_config.advertising, config.advertising); |