diff options
Diffstat (limited to 'drivers/net/phy/nxp-tja11xx.c')
| -rw-r--r-- | drivers/net/phy/nxp-tja11xx.c | 201 |
1 files changed, 195 insertions, 6 deletions
diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c index 47caae770ffc..cc766b2d4136 100644 --- a/drivers/net/phy/nxp-tja11xx.c +++ b/drivers/net/phy/nxp-tja11xx.c @@ -6,15 +6,19 @@ #include <linux/delay.h> #include <linux/ethtool.h> #include <linux/kernel.h> +#include <linux/mdio.h> #include <linux/mii.h> #include <linux/module.h> #include <linux/phy.h> #include <linux/hwmon.h> #include <linux/bitfield.h> +#include <linux/of_mdio.h> +#include <linux/of_irq.h> #define PHY_ID_MASK 0xfffffff0 #define PHY_ID_TJA1100 0x0180dc40 #define PHY_ID_TJA1101 0x0180dd00 +#define PHY_ID_TJA1102 0x0180dc80 #define MII_ECTRL 17 #define MII_ECTRL_LINK_CONTROL BIT(15) @@ -40,6 +44,10 @@ #define MII_INTSRC_TEMP_ERR BIT(1) #define MII_INTSRC_UV_ERR BIT(3) +#define MII_INTEN 22 +#define MII_INTEN_LINK_FAIL BIT(10) +#define MII_INTEN_LINK_UP BIT(9) + #define MII_COMMSTAT 23 #define MII_COMMSTAT_LINK_UP BIT(15) @@ -52,6 +60,8 @@ struct tja11xx_priv { char *hwmon_name; struct device *hwmon_dev; + struct phy_device *phydev; + struct work_struct phy_register_work; }; struct tja11xx_phy_stats { @@ -180,6 +190,7 @@ static int tja11xx_config_init(struct phy_device *phydev) return ret; break; case PHY_ID_TJA1101: + case PHY_ID_TJA1102: ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); if (ret) return ret; @@ -317,16 +328,12 @@ static const struct hwmon_chip_info tja11xx_hwmon_chip_info = { .info = tja11xx_hwmon_info, }; -static int tja11xx_probe(struct phy_device *phydev) +static int tja11xx_hwmon_register(struct phy_device *phydev, + struct tja11xx_priv *priv) { struct device *dev = &phydev->mdio.dev; - struct tja11xx_priv *priv; int i; - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL); if (!priv->hwmon_name) return -ENOMEM; @@ -344,6 +351,152 @@ static int tja11xx_probe(struct phy_device *phydev) return PTR_ERR_OR_ZERO(priv->hwmon_dev); } +static int tja11xx_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct tja11xx_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phydev = phydev; + + return tja11xx_hwmon_register(phydev, priv); +} + +static void tja1102_p1_register(struct work_struct *work) +{ + struct tja11xx_priv *priv = container_of(work, struct tja11xx_priv, + phy_register_work); + struct phy_device *phydev_phy0 = priv->phydev; + struct mii_bus *bus = phydev_phy0->mdio.bus; + struct device *dev = &phydev_phy0->mdio.dev; + struct device_node *np = dev->of_node; + struct device_node *child; + int ret; + + for_each_available_child_of_node(np, child) { + struct phy_device *phy; + int addr; + + addr = of_mdio_parse_addr(dev, child); + if (addr < 0) { + dev_err(dev, "Can't parse addr\n"); + continue; + } else if (addr != phydev_phy0->mdio.addr + 1) { + /* Currently we care only about double PHY chip TJA1102. + * If some day NXP will decide to bring chips with more + * PHYs, this logic should be reworked. + */ + dev_err(dev, "Unexpected address. Should be: %i\n", + phydev_phy0->mdio.addr + 1); + continue; + } + + if (mdiobus_is_registered_device(bus, addr)) { + dev_err(dev, "device is already registered\n"); + continue; + } + + /* Real PHY ID of Port 1 is 0 */ + phy = phy_device_create(bus, addr, PHY_ID_TJA1102, false, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "Can't create PHY device for Port 1: %i\n", + addr); + continue; + } + + /* Overwrite parent device. phy_device_create() set parent to + * the mii_bus->dev, which is not correct in case. + */ + phy->mdio.dev.parent = dev; + + ret = of_mdiobus_phy_device_register(bus, phy, child, addr); + if (ret) { + /* All resources needed for Port 1 should be already + * available for Port 0. Both ports use the same + * interrupt line, so -EPROBE_DEFER would make no sense + * here. + */ + dev_err(dev, "Can't register Port 1. Unexpected error: %i\n", + ret); + phy_device_free(phy); + } + } +} + +static int tja1102_p0_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct tja11xx_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phydev = phydev; + INIT_WORK(&priv->phy_register_work, tja1102_p1_register); + + ret = tja11xx_hwmon_register(phydev, priv); + if (ret) + return ret; + + schedule_work(&priv->phy_register_work); + + return 0; +} + +static int tja1102_match_phy_device(struct phy_device *phydev, bool port0) +{ + int ret; + + if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102) + return 0; + + ret = phy_read(phydev, MII_PHYSID2); + if (ret < 0) + return ret; + + /* TJA1102 Port 1 has phyid 0 and doesn't support temperature + * and undervoltage alarms. + */ + if (port0) + return ret ? 1 : 0; + + return !ret; +} + +static int tja1102_p0_match_phy_device(struct phy_device *phydev) +{ + return tja1102_match_phy_device(phydev, true); +} + +static int tja1102_p1_match_phy_device(struct phy_device *phydev) +{ + return tja1102_match_phy_device(phydev, false); +} + +static int tja11xx_ack_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_INTSRC); + + return (ret < 0) ? ret : 0; +} + +static int tja11xx_config_intr(struct phy_device *phydev) +{ + int value = 0; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP; + + return phy_write(phydev, MII_INTEN, value); +} + static struct phy_driver tja11xx_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_TJA1100), @@ -375,6 +528,41 @@ static struct phy_driver tja11xx_driver[] = { .get_sset_count = tja11xx_get_sset_count, .get_strings = tja11xx_get_strings, .get_stats = tja11xx_get_stats, + }, { + .name = "NXP TJA1102 Port 0", + .features = PHY_BASIC_T1_FEATURES, + .probe = tja1102_p0_probe, + .soft_reset = tja11xx_soft_reset, + .config_init = tja11xx_config_init, + .read_status = tja11xx_read_status, + .match_phy_device = tja1102_p0_match_phy_device, + .suspend = genphy_suspend, + .resume = genphy_resume, + .set_loopback = genphy_loopback, + /* Statistics */ + .get_sset_count = tja11xx_get_sset_count, + .get_strings = tja11xx_get_strings, + .get_stats = tja11xx_get_stats, + .ack_interrupt = tja11xx_ack_interrupt, + .config_intr = tja11xx_config_intr, + + }, { + .name = "NXP TJA1102 Port 1", + .features = PHY_BASIC_T1_FEATURES, + /* currently no probe for Port 1 is need */ + .soft_reset = tja11xx_soft_reset, + .config_init = tja11xx_config_init, + .read_status = tja11xx_read_status, + .match_phy_device = tja1102_p1_match_phy_device, + .suspend = genphy_suspend, + .resume = genphy_resume, + .set_loopback = genphy_loopback, + /* Statistics */ + .get_sset_count = tja11xx_get_sset_count, + .get_strings = tja11xx_get_strings, + .get_stats = tja11xx_get_stats, + .ack_interrupt = tja11xx_ack_interrupt, + .config_intr = tja11xx_config_intr, } }; @@ -383,6 +571,7 @@ module_phy_driver(tja11xx_driver); static struct mdio_device_id __maybe_unused tja11xx_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) }, { PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) }, + { PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) }, { } }; |