diff options
Diffstat (limited to 'drivers/net/phy/mdio-bcm-unimac.c')
| -rw-r--r-- | drivers/net/phy/mdio-bcm-unimac.c | 103 |
1 files changed, 70 insertions, 33 deletions
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c index 34395230ce70..08e0647b85e2 100644 --- a/drivers/net/phy/mdio-bcm-unimac.c +++ b/drivers/net/phy/mdio-bcm-unimac.c @@ -21,6 +21,8 @@ #include <linux/of_platform.h> #include <linux/of_mdio.h> +#include <linux/platform_data/mdio-bcm-unimac.h> + #define MDIO_CMD 0x00 #define MDIO_START_BUSY (1 << 29) #define MDIO_READ_FAIL (1 << 28) @@ -41,46 +43,80 @@ struct unimac_mdio_priv { struct mii_bus *mii_bus; void __iomem *base; + int (*wait_func) (void *wait_func_data); + void *wait_func_data; }; +static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset) +{ + /* MIPS chips strapped for BE will automagically configure the + * peripheral registers for CPU-native byte order. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(priv->base + offset); + else + return readl_relaxed(priv->base + offset); +} + +static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val, + u32 offset) +{ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, priv->base + offset); + else + writel_relaxed(val, priv->base + offset); +} + static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) { u32 reg; - reg = __raw_readl(priv->base + MDIO_CMD); + reg = unimac_mdio_readl(priv, MDIO_CMD); reg |= MDIO_START_BUSY; - __raw_writel(reg, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, reg, MDIO_CMD); } static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv) { - return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY; + return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY; +} + +static int unimac_mdio_poll(void *wait_func_data) +{ + struct unimac_mdio_priv *priv = wait_func_data; + unsigned int timeout = 1000; + + do { + if (!unimac_mdio_busy(priv)) + return 0; + + usleep_range(1000, 2000); + } while (--timeout); + + if (!timeout) + return -ETIMEDOUT; + + return 0; } static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) { struct unimac_mdio_priv *priv = bus->priv; - unsigned int timeout = 1000; + int ret; u32 cmd; /* Prepare the read operation */ cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); - __raw_writel(cmd, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, cmd, MDIO_CMD); /* Start MDIO transaction */ unimac_mdio_start(priv); - do { - if (!unimac_mdio_busy(priv)) - break; + ret = priv->wait_func(priv->wait_func_data); + if (ret) + return ret; - usleep_range(1000, 2000); - } while (timeout--); - - if (!timeout) - return -ETIMEDOUT; - - cmd = __raw_readl(priv->base + MDIO_CMD); + cmd = unimac_mdio_readl(priv, MDIO_CMD); /* Some broken devices are known not to release the line during * turn-around, e.g: Broadcom BCM53125 external switches, so check for @@ -97,27 +133,16 @@ static int unimac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) { struct unimac_mdio_priv *priv = bus->priv; - unsigned int timeout = 1000; u32 cmd; /* Prepare the write operation */ cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT) | (0xffff & val); - __raw_writel(cmd, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, cmd, MDIO_CMD); unimac_mdio_start(priv); - do { - if (!unimac_mdio_busy(priv)) - break; - - usleep_range(1000, 2000); - } while (timeout--); - - if (!timeout) - return -ETIMEDOUT; - - return 0; + return priv->wait_func(priv->wait_func_data); } /* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with @@ -155,8 +180,10 @@ static int unimac_mdio_reset(struct mii_bus *bus) } for (addr = 0; addr < PHY_MAX_ADDR; addr++) { - if (read_mask & 1 << addr) + if (read_mask & 1 << addr) { + dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr); mdiobus_read(bus, addr, MII_BMSR); + } } return 0; @@ -164,6 +191,7 @@ static int unimac_mdio_reset(struct mii_bus *bus) static int unimac_mdio_probe(struct platform_device *pdev) { + struct unimac_mdio_pdata *pdata = pdev->dev.platform_data; struct unimac_mdio_priv *priv; struct device_node *np; struct mii_bus *bus; @@ -193,12 +221,21 @@ static int unimac_mdio_probe(struct platform_device *pdev) bus = priv->mii_bus; bus->priv = priv; - bus->name = "unimac MII bus"; + if (pdata) { + bus->name = pdata->bus_name; + priv->wait_func = pdata->wait_func; + priv->wait_func_data = pdata->wait_func_data; + bus->phy_mask = ~pdata->phy_mask; + } else { + bus->name = "unimac MII bus"; + priv->wait_func_data = priv; + priv->wait_func = unimac_mdio_poll; + } bus->parent = &pdev->dev; bus->read = unimac_mdio_read; bus->write = unimac_mdio_write; bus->reset = unimac_mdio_reset; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name); + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); ret = of_mdiobus_register(bus, np); if (ret) { @@ -240,7 +277,7 @@ MODULE_DEVICE_TABLE(of, unimac_mdio_ids); static struct platform_driver unimac_mdio_driver = { .driver = { - .name = "unimac-mdio", + .name = UNIMAC_MDIO_DRV_NAME, .of_match_table = unimac_mdio_ids, }, .probe = unimac_mdio_probe, @@ -251,4 +288,4 @@ module_platform_driver(unimac_mdio_driver); MODULE_AUTHOR("Broadcom Corporation"); MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:unimac-mdio"); +MODULE_ALIAS("platform:" UNIMAC_MDIO_DRV_NAME); |