1 files changed, 87 insertions, 150 deletions

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 82ab6ed3b74e..100b401b1f4a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Marvell 10G 88x3310 PHY driver
  *
@@ -26,6 +27,9 @@
 #include <linux/marvell_phy.h>
 #include <linux/phy.h>
 
+#define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
+#define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
+
 enum {
 	MV_PCS_BASE_T		= 0x0000,
 	MV_PCS_BASE_R		= 0x1000,
@@ -57,24 +61,6 @@ struct mv3310_priv {
 	char *hwmon_name;
 };
 
-static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
-			 u16 mask, u16 bits)
-{
-	int old, val, ret;
-
-	old = phy_read_mmd(phydev, devad, reg);
-	if (old < 0)
-		return old;
-
-	val = (old & ~mask) | (bits & mask);
-	if (val == old)
-		return 0;
-
-	ret = phy_write_mmd(phydev, devad, reg, val);
-
-	return ret < 0 ? ret : 1;
-}
-
 #ifdef CONFIG_HWMON
 static umode_t mv3310_hwmon_is_visible(const void *data,
 				       enum hwmon_sensor_types type,
@@ -158,10 +144,9 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
 		return ret;
 
 	val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
-	ret = mv3310_modify(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
-			    MV_V2_TEMP_CTRL_MASK, val);
 
-	return ret < 0 ? ret : 0;
+	return phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
+			      MV_V2_TEMP_CTRL_MASK, val);
 }
 
 static void mv3310_hwmon_disable(void *data)
@@ -249,95 +234,58 @@ static int mv3310_resume(struct phy_device *phydev)
 	return mv3310_hwmon_config(phydev, true);
 }
 
-static int mv3310_config_init(struct phy_device *phydev)
+/* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010
+ * don't set bit 14 in PMA Extended Abilities (1.11), although they do
+ * support 2.5GBASET and 5GBASET. For these models, we can still read their
+ * 2.5G/5G extended abilities register (1.21). We detect these models based on
+ * the PMA device identifier, with a mask matching models known to have this
+ * issue
+ */
+static bool mv3310_has_pma_ngbaset_quirk(struct phy_device *phydev)
 {
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
-	int val;
+	if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_PMAPMD))
+		return false;
 
+	/* Only some revisions of the 88X3310 family PMA seem to be impacted */
+	return (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
+		MV_PHY_ALASKA_NBT_QUIRK_MASK) == MV_PHY_ALASKA_NBT_QUIRK_REV;
+}
+
+static int mv3310_config_init(struct phy_device *phydev)
+{
 	/* Check that the PHY interface type is compatible */
 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
 	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
 	    phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
 	    phydev->interface != PHY_INTERFACE_MODE_10GKR)
 		return -ENODEV;
 
-	__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
-	__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
-
-	if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
-		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-		if (val < 0)
-			return val;
+	return 0;
+}
 
-		if (val & MDIO_AN_STAT1_ABLE)
-			__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
-	}
+static int mv3310_get_features(struct phy_device *phydev)
+{
+	int ret, val;
 
-	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
-	if (val < 0)
-		return val;
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret)
+		return ret;
 
-	/* Ethtool does not support the WAN mode bits */
-	if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR |
-		   MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 |
-		   MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW |
-		   MDIO_PMA_STAT2_10GBEW))
-		__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBSR)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBLR)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported);
-	if (val & MDIO_PMA_STAT2_10GBER)
-		__set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported);
-
-	if (val & MDIO_PMA_STAT2_EXTABLE) {
-		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+	if (mv3310_has_pma_ngbaset_quirk(phydev)) {
+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+				   MDIO_PMA_NG_EXTABLE);
 		if (val < 0)
 			return val;
 
-		if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT |
-			   MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT))
-			__set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
-		if (val & MDIO_PMA_EXTABLE_10GBLRM)
-			__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
-		if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR |
-			   MDIO_PMA_EXTABLE_1000BKX))
-			__set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported);
-		if (val & MDIO_PMA_EXTABLE_10GBLRM)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBT)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBKX4)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_10GBKR)
-			__set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_1000BT)
-			__set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_1000BKX)
-			__set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
-				  supported);
-		if (val & MDIO_PMA_EXTABLE_100BTX) {
-			__set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				  supported);
-			__set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-				  supported);
-		}
-		if (val & MDIO_PMA_EXTABLE_10BT) {
-			__set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
-				  supported);
-			__set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
-				  supported);
-		}
-	}
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_NG_EXTABLE_2_5GBT);
 
-	linkmode_copy(phydev->supported, supported);
-	linkmode_and(phydev->advertising, phydev->advertising,
-		     phydev->supported);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_NG_EXTABLE_5GBT);
+	}
 
 	return 0;
 }
@@ -351,52 +299,27 @@ static int mv3310_config_aneg(struct phy_device *phydev)
 	/* We don't support manual MDI control */
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 
-	if (phydev->autoneg == AUTONEG_DISABLE) {
-		ret = genphy_c45_pma_setup_forced(phydev);
-		if (ret < 0)
-			return ret;
-
-		return genphy_c45_an_disable_aneg(phydev);
-	}
-
-	linkmode_and(phydev->advertising, phydev->advertising,
-		     phydev->supported);
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_pma_setup_forced(phydev);
 
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
-			    ADVERTISE_ALL | ADVERTISE_100BASE4 |
-			    ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-			    linkmode_adv_to_mii_adv_t(phydev->advertising));
+	ret = genphy_c45_an_config_aneg(phydev);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
 		changed = true;
 
+	/* Clause 45 has no standardized support for 1000BaseT, therefore
+	 * use vendor registers for this mode.
+	 */
 	reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
-			    ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
+			     ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
 		changed = true;
 
-	/* 10G control register */
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-			      phydev->advertising))
-		reg = MDIO_AN_10GBT_CTRL_ADV10G;
-	else
-		reg = 0;
-
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-			    MDIO_AN_10GBT_CTRL_ADV10G, reg);
-	if (ret < 0)
-		return ret;
-	if (ret > 0)
-		changed = true;
-
-	if (changed)
-		ret = genphy_c45_restart_aneg(phydev);
-
-	return ret;
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
 }
 
 static int mv3310_aneg_done(struct phy_device *phydev)
@@ -416,18 +339,29 @@ static int mv3310_aneg_done(struct phy_device *phydev)
 static void mv3310_update_interface(struct phy_device *phydev)
 {
 	if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
+	     phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
 	     phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {
 		/* The PHY automatically switches its serdes interface (and
-		 * active PHYXS instance) between Cisco SGMII and 10GBase-KR
-		 * modes according to the speed.  Florian suggests setting
-		 * phydev->interface to communicate this to the MAC. Only do
-		 * this if we are already in either SGMII or 10GBase-KR mode.
+		 * active PHYXS instance) between Cisco SGMII, 10GBase-KR and
+		 * 2500BaseX modes according to the speed.  Florian suggests
+		 * setting phydev->interface to communicate this to the MAC.
+		 * Only do this if we are already in one of the above modes.
 		 */
-		if (phydev->speed == SPEED_10000)
+		switch (phydev->speed) {
+		case SPEED_10000:
 			phydev->interface = PHY_INTERFACE_MODE_10GKR;
-		else if (phydev->speed >= SPEED_10 &&
-			 phydev->speed < SPEED_10000)
+			break;
+		case SPEED_2500:
+			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+			break;
+		case SPEED_1000:
+		case SPEED_100:
+		case SPEED_10:
 			phydev->interface = PHY_INTERFACE_MODE_SGMII;
+			break;
+		default:
+			break;
+		}
 	}
 }
 
@@ -445,16 +379,8 @@ static int mv3310_read_10gbr_status(struct phy_device *phydev)
 
 static int mv3310_read_status(struct phy_device *phydev)
 {
-	u32 mmd_mask = phydev->c45_ids.devices_in_package;
 	int val;
 
-	/* The vendor devads do not report link status.  Avoid the PHYXS
-	 * instance as there are three, and its status depends on the MAC
-	 * being appropriately configured for the negotiated speed.
-	 */
-	mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2) |
-		      BIT(MDIO_MMD_PHYXS));
-
 	phydev->speed = SPEED_UNKNOWN;
 	phydev->duplex = DUPLEX_UNKNOWN;
 	linkmode_zero(phydev->lp_advertising);
@@ -470,12 +396,10 @@ static int mv3310_read_status(struct phy_device *phydev)
 	if (val & MDIO_STAT1_LSTATUS)
 		return mv3310_read_10gbr_status(phydev);
 
-	val = genphy_c45_read_link(phydev, mmd_mask);
+	val = genphy_c45_read_link(phydev);
 	if (val < 0)
 		return val;
 
-	phydev->link = val > 0 ? 1 : 0;
-
 	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
 	if (val < 0)
 		return val;
@@ -531,11 +455,11 @@ static int mv3310_read_status(struct phy_device *phydev)
 
 static struct phy_driver mv3310_drivers[] = {
 	{
-		.phy_id		= 0x002b09aa,
+		.phy_id		= MARVELL_PHY_ID_88X3310,
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
-		.features	= PHY_10GBIT_FEATURES,
-		.soft_reset	= gen10g_no_soft_reset,
+		.get_features	= mv3310_get_features,
+		.soft_reset	= genphy_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.probe		= mv3310_probe,
 		.suspend	= mv3310_suspend,
@@ -544,12 +468,25 @@ static struct phy_driver mv3310_drivers[] = {
 		.aneg_done	= mv3310_aneg_done,
 		.read_status	= mv3310_read_status,
 	},
+	{
+		.phy_id		= MARVELL_PHY_ID_88E2110,
+		.phy_id_mask	= MARVELL_PHY_ID_MASK,
+		.name		= "mv88x2110",
+		.get_features	= genphy_c45_pma_read_abilities,
+		.probe		= mv3310_probe,
+		.soft_reset	= genphy_no_soft_reset,
+		.config_init	= mv3310_config_init,
+		.config_aneg	= mv3310_config_aneg,
+		.aneg_done	= mv3310_aneg_done,
+		.read_status	= mv3310_read_status,
+	},
 };
 
 module_phy_driver(mv3310_drivers);
 
 static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
-	{ 0x002b09aa, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
 	{ },
 };
 MODULE_DEVICE_TABLE(mdio, mv3310_tbl);