diff options
Diffstat (limited to 'drivers/net/phy/marvell10g.c')
| -rw-r--r-- | drivers/net/phy/marvell10g.c | 107 |
1 files changed, 106 insertions, 1 deletions
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index bd310e8d5e43..b6fea119fe13 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -22,6 +22,7 @@ * If both the fiber and copper ports are connected, the first to gain * link takes priority and the other port is completely locked out. */ +#include <linux/bitfield.h> #include <linux/ctype.h> #include <linux/delay.h> #include <linux/hwmon.h> @@ -33,6 +34,8 @@ #define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa) +#define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d)) + enum { MV_PMA_FW_VER0 = 0xc011, MV_PMA_FW_VER1 = 0xc012, @@ -62,6 +65,15 @@ enum { MV_PCS_CSCR1_MDIX_MDIX = 0x0020, MV_PCS_CSCR1_MDIX_AUTO = 0x0060, + MV_PCS_DSC1 = 0x8003, + MV_PCS_DSC1_ENABLE = BIT(9), + MV_PCS_DSC1_10GBT = 0x01c0, + MV_PCS_DSC1_1GBR = 0x0038, + MV_PCS_DSC1_100BTX = 0x0007, + MV_PCS_DSC2 = 0x8004, + MV_PCS_DSC2_2P5G = 0xf000, + MV_PCS_DSC2_5G = 0x0f00, + MV_PCS_CSSR1 = 0x8008, MV_PCS_CSSR1_SPD1_MASK = 0xc000, MV_PCS_CSSR1_SPD1_SPD2 = 0xc000, @@ -125,6 +137,7 @@ enum { }; struct mv3310_chip { + bool (*has_downshift)(struct phy_device *phydev); void (*init_supported_interfaces)(unsigned long *mask); int (*get_mactype)(struct phy_device *phydev); int (*init_interface)(struct phy_device *phydev, int mactype); @@ -138,6 +151,7 @@ struct mv3310_priv { DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX); u32 firmware_ver; + bool has_downshift; bool rate_match; phy_interface_t const_interface; @@ -330,6 +344,71 @@ static int mv3310_reset(struct phy_device *phydev, u32 unit) 5000, 100000, true); } +static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + int val; + + if (!priv->has_downshift) + return -EOPNOTSUPP; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1); + if (val < 0) + return val; + + if (val & MV_PCS_DSC1_ENABLE) + /* assume that all fields are the same */ + *ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val); + else + *ds = DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int mv3310_set_downshift(struct phy_device *phydev, u8 ds) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + u16 val; + int err; + + if (!priv->has_downshift) + return -EOPNOTSUPP; + + if (ds == DOWNSHIFT_DEV_DISABLE) + return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1, + MV_PCS_DSC1_ENABLE); + + /* DOWNSHIFT_DEV_DEFAULT_COUNT is confusing. It looks like it should + * set the default settings for the PHY. However, it is used for + * "ethtool --set-phy-tunable ethN downshift on". The intention is + * to enable downshift at a default number of retries. The default + * settings for 88x3310 are for two retries with downshift disabled. + * So let's use two retries with downshift enabled. + */ + if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT) + ds = 2; + + if (ds > 8) + return -E2BIG; + + ds -= 1; + val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds); + val |= FIELD_PREP(MV_PCS_DSC2_5G, ds); + err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2, + MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val); + if (err < 0) + return err; + + val = MV_PCS_DSC1_ENABLE; + val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds); + val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds); + val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds); + + return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1, + MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT | + MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val); +} + static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd) { int val; @@ -448,6 +527,9 @@ static int mv3310_probe(struct phy_device *phydev) priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255, (priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255); + if (chip->has_downshift) + priv->has_downshift = chip->has_downshift(phydev); + /* Powering down the port when not in use saves about 600mW */ ret = mv3310_power_down(phydev); if (ret) @@ -616,7 +698,16 @@ static int mv3310_config_init(struct phy_device *phydev) } /* Enable EDPD mode - saving 600mW */ - return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); + err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); + if (err) + return err; + + /* Allow downshift */ + err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT); + if (err && err != -EOPNOTSUPP) + return err; + + return 0; } static int mv3310_get_features(struct phy_device *phydev) @@ -886,6 +977,8 @@ static int mv3310_get_tunable(struct phy_device *phydev, struct ethtool_tunable *tuna, void *data) { switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return mv3310_get_downshift(phydev, data); case ETHTOOL_PHY_EDPD: return mv3310_get_edpd(phydev, data); default: @@ -897,6 +990,8 @@ static int mv3310_set_tunable(struct phy_device *phydev, struct ethtool_tunable *tuna, const void *data) { switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return mv3310_set_downshift(phydev, *(u8 *)data); case ETHTOOL_PHY_EDPD: return mv3310_set_edpd(phydev, *(u16 *)data); default: @@ -904,6 +999,14 @@ static int mv3310_set_tunable(struct phy_device *phydev, } } +static bool mv3310_has_downshift(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + /* Fails to downshift with firmware older than v0.3.5.0 */ + return priv->firmware_ver >= MV_VERSION(0,3,5,0); +} + static void mv3310_init_supported_interfaces(unsigned long *mask) { __set_bit(PHY_INTERFACE_MODE_SGMII, mask); @@ -943,6 +1046,7 @@ static void mv2111_init_supported_interfaces(unsigned long *mask) } static const struct mv3310_chip mv3310_type = { + .has_downshift = mv3310_has_downshift, .init_supported_interfaces = mv3310_init_supported_interfaces, .get_mactype = mv3310_get_mactype, .init_interface = mv3310_init_interface, @@ -953,6 +1057,7 @@ static const struct mv3310_chip mv3310_type = { }; static const struct mv3310_chip mv3340_type = { + .has_downshift = mv3310_has_downshift, .init_supported_interfaces = mv3340_init_supported_interfaces, .get_mactype = mv3310_get_mactype, .init_interface = mv3340_init_interface, |