diff options
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 89 |
1 files changed, 57 insertions, 32 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 937d0059e8ac..7d68b28bb893 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -26,18 +26,13 @@ MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); +static int bcm54xx_config_clock_delay(struct phy_device *phydev); + static int bcm54210e_config_init(struct phy_device *phydev) { int val; - val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); - val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; - val |= MII_BCM54XX_AUXCTL_MISC_WREN; - bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val); - - val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL); - val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; - bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); + bcm54xx_config_clock_delay(phydev); if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) { val = phy_read(phydev, MII_CTRL1000); @@ -52,26 +47,7 @@ static int bcm54612e_config_init(struct phy_device *phydev) { int reg; - /* Clear TX internal delay unless requested. */ - if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && - (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) { - /* Disable TXD to GTXCLK clock delay (default set) */ - /* Bit 9 is the only field in shadow register 00011 */ - bcm_phy_write_shadow(phydev, 0x03, 0); - } - - /* Clear RX internal delay unless requested. */ - if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && - (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { - reg = bcm54xx_auxctl_read(phydev, - MII_BCM54XX_AUXCTL_SHDWSEL_MISC); - /* Disable RXD to RXC delay (default set) */ - reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; - /* Clear shadow selector field */ - reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; - bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, - MII_BCM54XX_AUXCTL_MISC_WREN | reg); - } + bcm54xx_config_clock_delay(phydev); /* Enable CLK125 MUX on LED4 if ref clock is enabled. */ if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) { @@ -383,9 +359,9 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Select 1000BASE-X register set (primary SerDes) */ - reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE); - bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE, - reg | BCM5482_SHD_MODE_1000BX); + reg = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, + reg | BCM54XX_SHD_MODE_1000BX); /* * LED1=ACTIVITYLED, LED3=LINKSPD[2] @@ -451,12 +427,47 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_probe(struct phy_device *phydev) +{ + int val, intf_sel; + + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE); + if (val < 0) + return val; + + /* The PHY is strapped in RGMII-fiber mode when INTERF_SEL[1:0] + * is 01b, and the link between PHY and its link partner can be + * either 1000Base-X or 100Base-FX. + * RGMII-1000Base-X is properly supported, but RGMII-100Base-FX + * support is still missing as of now. + */ + intf_sel = (val & BCM54XX_SHD_INTF_SEL_MASK) >> 1; + if (intf_sel == 1) { + val = bcm_phy_read_shadow(phydev, BCM54616S_SHD_100FX_CTRL); + if (val < 0) + return val; + + /* Bit 0 of the SerDes 100-FX Control register, when set + * to 1, sets the MII/RGMII -> 100BASE-FX configuration. + * When this bit is set to 0, it sets the GMII/RGMII -> + * 1000BASE-X configuration. + */ + if (!(val & BCM54616S_100FX_MODE)) + phydev->dev_flags |= PHY_BCM_FLAGS_MODE_1000BX; + } + + return 0; +} + static int bcm54616s_config_aneg(struct phy_device *phydev) { int ret; /* Aneg firsly. */ - ret = genphy_config_aneg(phydev); + if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) + ret = genphy_c37_config_aneg(phydev); + else + ret = genphy_config_aneg(phydev); /* Then we can set up the delay. */ bcm54xx_config_clock_delay(phydev); @@ -464,6 +475,18 @@ static int bcm54616s_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_read_status(struct phy_device *phydev) +{ + int err; + + if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) + err = genphy_c37_read_status(phydev); + else + err = genphy_read_status(phydev); + + return err; +} + static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) { int val; @@ -655,6 +678,8 @@ static struct phy_driver broadcom_drivers[] = { .config_aneg = bcm54616s_config_aneg, .ack_interrupt = bcm_phy_ack_intr, .config_intr = bcm_phy_config_intr, + .read_status = bcm54616s_read_status, + .probe = bcm54616s_probe, }, { .phy_id = PHY_ID_BCM5464, .phy_id_mask = 0xfffffff0, |