summaryrefslogtreecommitdiff
path: root/drivers/net/phy/bcm7xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/bcm7xxx.c')
-rw-r--r--drivers/net/phy/bcm7xxx.c294
1 files changed, 204 insertions, 90 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index fdce1ea28790..974ec4515269 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/brcmphy.h>
+#include <linux/mdio.h>
/* Broadcom BCM7xxx internal PHY registers */
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
@@ -38,45 +39,15 @@
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
+#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
+#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
+#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
#define CORE_EXPB0 0xb0
-static int bcm7445_config_init(struct phy_device *phydev)
-{
- int ret;
- const struct bcm7445_regs {
- int reg;
- u16 value;
- } bcm7445_regs_cfg[] = {
- /* increases ADC latency by 24ns */
- { MII_BCM54XX_EXP_SEL, 0x0038 },
- { MII_BCM54XX_EXP_DATA, 0xAB95 },
- /* increases internal 1V LDO voltage by 5% */
- { MII_BCM54XX_EXP_SEL, 0x2038 },
- { MII_BCM54XX_EXP_DATA, 0xBB22 },
- /* reduce RX low pass filter corner frequency */
- { MII_BCM54XX_EXP_SEL, 0x6038 },
- { MII_BCM54XX_EXP_DATA, 0xFFC5 },
- /* reduce RX high pass filter corner frequency */
- { MII_BCM54XX_EXP_SEL, 0x003a },
- { MII_BCM54XX_EXP_DATA, 0x2002 },
- };
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
- ret = phy_write(phydev,
- bcm7445_regs_cfg[i].reg,
- bcm7445_regs_cfg[i].value);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
static void phy_write_exp(struct phy_device *phydev,
u16 reg, u16 value)
{
@@ -101,7 +72,16 @@ static void phy_write_misc(struct phy_device *phydev,
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
}
-static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
+static void r_rc_cal_reset(struct phy_device *phydev)
+{
+ /* Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_AL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0000);
+}
+
+static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
{
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
@@ -122,11 +102,7 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
/* Switch to CORE_BASE1E */
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
- /* Reset R_CAL/RC_CAL Engine */
- phy_write_exp(phydev, CORE_EXPB0, 0x0010);
-
- /* Disable Reset R_CAL/RC_CAL Engine */
- phy_write_exp(phydev, CORE_EXPB0, 0x0000);
+ r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
@@ -146,15 +122,152 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+
+ /* AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
+ phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+
+ /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
+ phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+ /* AFE_TX_CONFIG, set 1000BT Cfeed=110 for all ports */
+ phy_write_misc(phydev, AFE_TX_CONFIG, 0x0061);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
+ phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
+static int bcm7xxx_apd_enable(struct phy_device *phydev)
+{
+ int val;
+
+ /* Enable powering down of the DLL during auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+ /* Enable auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_APD_EN;
+ return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm7xxx_eee_enable(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ /* Enable general EEE feature at the PHY level */
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+ phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ /* Advertise supported modes */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ return 0;
+}
+
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
- int ret;
+ u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+ u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+ int ret = 0;
+
+ pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
+ dev_name(&phydev->dev), phydev->drv->name, rev, patch);
+
+ switch (rev) {
+ case 0xb0:
+ ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
+ break;
+ case 0xd0:
+ ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
+ break;
+ case 0xe0:
+ case 0xf0:
+ /* Rev G0 introduces a roll over */
+ case 0x10:
+ ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ return ret;
- ret = bcm7445_config_init(phydev);
+ ret = bcm7xxx_eee_enable(phydev);
if (ret)
return ret;
- return bcm7xxx_28nm_afe_config_init(phydev);
+ return bcm7xxx_apd_enable(phydev);
}
static int bcm7xxx_28nm_resume(struct phy_device *phydev)
@@ -201,8 +314,8 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
- /* Workaround only required for 100Mbits/sec */
- if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+ /* Workaround only required for 100Mbits/sec capable PHYs */
+ if (phydev->supported & PHY_GBIT_FEATURES)
return 0;
/* set shadow mode 2 */
@@ -263,43 +376,53 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
return 0;
}
+#define BCM7XXX_28NM_GPHY(_oui, _name) \
+{ \
+ .phy_id = (_oui), \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_GBIT_FEATURES | \
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
+ .flags = PHY_IS_INTERNAL, \
+ .config_init = bcm7xxx_28nm_config_init, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ .resume = bcm7xxx_28nm_resume, \
+ .driver = { .owner = THIS_MODULE }, \
+}
+
static struct phy_driver bcm7xxx_driver[] = {
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
{
- .phy_id = PHY_ID_BCM7366,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7366",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_afe_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .resume = bcm7xxx_28nm_resume,
- .driver = { .owner = THIS_MODULE },
-}, {
- .phy_id = PHY_ID_BCM7439,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7439",
- .features = PHY_GBIT_FEATURES |
+ .phy_id = PHY_ID_BCM7425,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7425",
+ .features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_afe_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .resume = bcm7xxx_28nm_resume,
- .driver = { .owner = THIS_MODULE },
+ .flags = 0,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
}, {
- .phy_id = PHY_ID_BCM7445,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7445",
- .features = PHY_GBIT_FEATURES |
+ .phy_id = PHY_ID_BCM7429,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7429",
+ .features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .resume = bcm7xxx_28nm_afe_config_init,
- .driver = { .owner = THIS_MODULE },
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_BCM_OUI_4,
.phy_id_mask = 0xffff0000,
@@ -329,7 +452,11 @@ static struct phy_driver bcm7xxx_driver[] = {
} };
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7364, 0xfffffff0, },
{ PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7425, 0xfffffff0, },
+ { PHY_ID_BCM7429, 0xfffffff0, },
{ PHY_ID_BCM7439, 0xfffffff0, },
{ PHY_ID_BCM7445, 0xfffffff0, },
{ PHY_BCM_OUI_4, 0xffff0000 },
@@ -337,20 +464,7 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
{ }
};
-static int __init bcm7xxx_phy_init(void)
-{
- return phy_drivers_register(bcm7xxx_driver,
- ARRAY_SIZE(bcm7xxx_driver));
-}
-
-static void __exit bcm7xxx_phy_exit(void)
-{
- phy_drivers_unregister(bcm7xxx_driver,
- ARRAY_SIZE(bcm7xxx_driver));
-}
-
-module_init(bcm7xxx_phy_init);
-module_exit(bcm7xxx_phy_exit);
+module_phy_driver(bcm7xxx_driver);
MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 15:05:59 +0300