summaryrefslogtreecommitdiff
path: root/drivers/net/phy/bcm7xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/bcm7xxx.c')
-rw-r--r--drivers/net/phy/bcm7xxx.c187
1 files changed, 133 insertions, 54 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 526b94cea569..1d211d369039 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/brcmphy.h>
+#include <linux/mdio.h>
/* Broadcom BCM7xxx internal PHY registers */
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
@@ -146,15 +147,96 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm7xxx_apd_enable(struct phy_device *phydev)
+{
+ int val;
+
+ /* Enable powering down of the DLL during auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+ /* Enable auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_APD_EN;
+ return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm7xxx_eee_enable(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ /* Enable general EEE feature at the PHY level */
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+ phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ /* Advertise supported modes */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ return 0;
+}
+
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
+ u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+ u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+ int ret = 0;
+
+ dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch);
+
+ switch (rev) {
+ case 0xa0:
+ case 0xb0:
+ ret = bcm7445_config_init(phydev);
+ break;
+ default:
+ ret = bcm7xxx_28nm_afe_config_init(phydev);
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ ret = bcm7xxx_eee_enable(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_apd_enable(phydev);
+}
+
+static int bcm7xxx_28nm_resume(struct phy_device *phydev)
+{
int ret;
- ret = bcm7445_config_init(phydev);
+ /* Re-apply workarounds coming out suspend/resume */
+ ret = bcm7xxx_28nm_config_init(phydev);
if (ret)
return ret;
- return bcm7xxx_28nm_afe_config_init(phydev);
+ /* 28nm Gigabit PHYs come out of reset without any half-duplex
+ * or "hub" compliant advertised mode, fix that. This does not
+ * cause any problems with the PHY library since genphy_config_aneg()
+ * gracefully handles auto-negotiated and forced modes.
+ */
+ return genphy_config_aneg(phydev);
}
static int phy_set_clr_bits(struct phy_device *dev, int location,
@@ -184,8 +266,8 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
- /* Workaround only required for 100Mbits/sec */
- if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+ /* Workaround only required for 100Mbits/sec capable PHYs */
+ if (phydev->supported & PHY_GBIT_FEATURES)
return 0;
/* set shadow mode 2 */
@@ -212,7 +294,7 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
}
/* Workaround for putting the PHY in IDDQ mode, required
- * for all BCM7XXX PHYs
+ * for all BCM7XXX 40nm and 65nm PHYs
*/
static int bcm7xxx_suspend(struct phy_device *phydev)
{
@@ -246,59 +328,53 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
return 0;
}
+#define BCM7XXX_28NM_GPHY(_oui, _name) \
+{ \
+ .phy_id = (_oui), \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_GBIT_FEATURES | \
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
+ .flags = PHY_IS_INTERNAL, \
+ .config_init = bcm7xxx_28nm_afe_config_init, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ .resume = bcm7xxx_28nm_resume, \
+ .driver = { .owner = THIS_MODULE }, \
+}
+
static struct phy_driver bcm7xxx_driver[] = {
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
{
- .phy_id = PHY_ID_BCM7366,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7366",
- .features = PHY_GBIT_FEATURES |
+ .phy_id = PHY_ID_BCM7425,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7425",
+ .features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_afe_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_afe_config_init,
- .driver = { .owner = THIS_MODULE },
+ .flags = 0,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
}, {
- .phy_id = PHY_ID_BCM7439,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7439",
- .features = PHY_GBIT_FEATURES |
+ .phy_id = PHY_ID_BCM7429,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7429",
+ .features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_afe_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_afe_config_init,
- .driver = { .owner = THIS_MODULE },
-}, {
- .phy_id = PHY_ID_BCM7445,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7445",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_config_init,
- .driver = { .owner = THIS_MODULE },
-}, {
- .name = "Broadcom BCM7XXX 28nm",
- .phy_id = PHY_ID_BCM7XXX_28,
- .phy_id_mask = PHY_BCM_OUI_MASK,
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_config_init,
- .driver = { .owner = THIS_MODULE },
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_BCM_OUI_4,
.phy_id_mask = 0xffff0000,
@@ -328,10 +404,13 @@ static struct phy_driver bcm7xxx_driver[] = {
} };
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7364, 0xfffffff0, },
{ PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7425, 0xfffffff0, },
+ { PHY_ID_BCM7429, 0xfffffff0, },
{ PHY_ID_BCM7439, 0xfffffff0, },
{ PHY_ID_BCM7445, 0xfffffff0, },
- { PHY_ID_BCM7XXX_28, 0xfffffc00 },
{ PHY_BCM_OUI_4, 0xffff0000 },
{ PHY_BCM_OUI_5, 0xffffff00 },
{ }
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 16:14:55 +0300