diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 764035a8c9a1..5a8669aedf64 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -121,9 +121,15 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) enum ixgbe_phy_type phy_type; switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; case QT2022_PHY_ID: phy_type = ixgbe_phy_qt; break; + case ATH_PHY_ID: + phy_type = ixgbe_phy_nl; + break; default: phy_type = ixgbe_phy_unknown; break; @@ -426,3 +432,323 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, return 0; } +/** + * ixgbe_reset_phy_nl - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) +{ + u16 phy_offset, control, eword, edata, block_crc; + bool end_data = false; + u16 list_offset, data_offset; + u16 phy_data = 0; + s32 ret_val = 0; + u32 i; + + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + + /* reset the PHY and poll for completion */ + hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + (phy_data | IXGBE_MDIO_PHY_XS_RESET)); + + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) + break; + msleep(10); + } + + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { + hw_dbg(hw, "PHY reset did not complete.\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + + /* Get init offsets */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto out; + + ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); + data_offset++; + while (!end_data) { + /* + * Read control word from PHY init contents offset + */ + ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + control = (eword & IXGBE_CONTROL_MASK_NL) >> + IXGBE_CONTROL_SHIFT_NL; + edata = eword & IXGBE_DATA_MASK_NL; + switch (control) { + case IXGBE_DELAY_NL: + data_offset++; + hw_dbg(hw, "DELAY: %d MS\n", edata); + msleep(edata); + break; + case IXGBE_DATA_NL: + hw_dbg(hw, "DATA: \n"); + data_offset++; + hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + for (i = 0; i < edata; i++) { + hw->eeprom.ops.read(hw, data_offset, &eword); + hw->phy.ops.write_reg(hw, phy_offset, + IXGBE_TWINAX_DEV, eword); + hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, + phy_offset); + data_offset++; + phy_offset++; + } + break; + case IXGBE_CONTROL_NL: + data_offset++; + hw_dbg(hw, "CONTROL: \n"); + if (edata == IXGBE_CONTROL_EOL_NL) { + hw_dbg(hw, "EOL\n"); + end_data = true; + } else if (edata == IXGBE_CONTROL_SOL_NL) { + hw_dbg(hw, "SOL\n"); + } else { + hw_dbg(hw, "Bad control value\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + break; + default: + hw_dbg(hw, "Bad control type\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + } + +out: + return ret_val; +} + +/** + * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns + * the PHY type. + * @hw: pointer to hardware structure + * + * Searches for and indentifies the SFP module. Assings appropriate PHY type. + **/ +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 vendor_oui = 0; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[4] = {0, 0, 0, 0}; + u8 transmission_media = 0; + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status == IXGBE_ERR_SFP_NOT_PRESENT) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + goto out; + } + + if (identifier == IXGBE_SFF_IDENTIFIER_SFP) { + hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA, + &transmission_media); + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + */ + if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + + /* Determine PHY vendor */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.id = identifier; + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + switch (vendor_oui) { + case IXGBE_SFF_VENDOR_OUI_TYCO: + if (transmission_media & + IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.type = ixgbe_phy_tw_tyco; + break; + case IXGBE_SFF_VENDOR_OUI_FTL: + hw->phy.type = ixgbe_phy_sfp_ftl; + break; + case IXGBE_SFF_VENDOR_OUI_AVAGO: + hw->phy.type = ixgbe_phy_sfp_avago; + break; + default: + if (transmission_media & + IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.type = ixgbe_phy_tw_unknown; + else + hw->phy.type = ixgbe_phy_sfp_unknown; + break; + } + } + status = 0; + } + +out: + return status; +} + +/** + * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see + * if it supports a given SFP+ module type, if so it returns the offsets to the + * phy init sequence block. + * @hw: pointer to hardware structure + * @list_offset: offset to the SFP ID list + * @data_offset: offset to the SFP data block + **/ +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset) +{ + u16 sfp_id; + + if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return IXGBE_ERR_SFP_NOT_PRESENT; + + if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && + (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + /* Read offset to PHY init contents */ + hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + + if ((!*list_offset) || (*list_offset == 0xFFFF)) + return IXGBE_ERR_PHY; + + /* Shift offset to first ID word */ + (*list_offset)++; + + /* + * Find the matching SFP ID in the EEPROM + * and program the init sequence + */ + hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + + while (sfp_id != IXGBE_PHY_INIT_END_NL) { + if (sfp_id == hw->phy.sfp_type) { + (*list_offset)++; + hw->eeprom.ops.read(hw, *list_offset, data_offset); + if ((!*data_offset) || (*data_offset == 0xFFFF)) { + hw_dbg(hw, "SFP+ module not supported\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + break; + } + } else { + (*list_offset) += 2; + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + return IXGBE_ERR_PHY; + } + } + + if (sfp_id == IXGBE_PHY_INIT_END_NL) { + hw_dbg(hw, "No matching SFP+ module found\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + &phy_data); + phy_link = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + firmware_version); + + return status; +} + |