diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_main.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 1037 |
1 files changed, 583 insertions, 454 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e145f2c455cb..fa01b0b03b77 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -51,8 +51,12 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; - -#define DRV_VERSION "3.2.9-k2" +#define MAJ 3 +#define MIN 3 +#define BUILD 8 +#define KFIX 2 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ + __stringify(BUILD) "-k" __stringify(KFIX) const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = "Copyright (c) 1999-2011 Intel Corporation."; @@ -120,6 +124,10 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), + board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), + board_82599 }, /* required last entry */ {0, } @@ -185,6 +193,22 @@ static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; } +static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) +{ + if (!test_bit(__IXGBE_DOWN, &adapter->state) && + !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state)) + schedule_work(&adapter->service_task); +} + +static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) +{ + BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); + + /* flush memory to make sure state is correct before next watchog */ + smp_mb__before_clear_bit(); + clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); +} + struct ixgbe_reg_info { u32 ofs; char *name; @@ -811,7 +835,19 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring) #define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */ -static void ixgbe_tx_timeout(struct net_device *netdev); +/** + * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout + * @adapter: driver private struct + **/ +static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) +{ + + /* Do the reset outside of interrupt context */ + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; + ixgbe_service_event_schedule(adapter); + } +} /** * ixgbe_clean_tx_irq - Reclaim resources after transmit completes @@ -893,7 +929,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, adapter->tx_timeout_count + 1, tx_ring->queue_index); /* schedule immediate reset if we believe we hung */ - ixgbe_tx_timeout(adapter->netdev); + ixgbe_tx_timeout_reset(adapter); /* the adapter is about to reset, no point in enabling stuff */ return true; @@ -943,8 +979,6 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); - rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | - IXGBE_DCA_RXCTRL_DESC_HSRO_EN); IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); } @@ -962,7 +996,6 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl); break; case ixgbe_mac_82599EB: @@ -972,7 +1005,6 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl); break; default: @@ -1061,8 +1093,14 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) return 0; } - #endif /* CONFIG_IXGBE_DCA */ + +static inline void ixgbe_rx_hash(union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss); +} + /** * ixgbe_receive_skb - Send a completed packet up the stack * @adapter: board private structure @@ -1454,6 +1492,8 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, } ixgbe_rx_checksum(adapter, rx_desc, skb); + if (adapter->netdev->features & NETIF_F_RXHASH) + ixgbe_rx_hash(rx_desc, skb); /* probably a little skewed due to removing CRC */ total_rx_bytes += skb->len; @@ -1787,35 +1827,51 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) } /** - * ixgbe_check_overtemp_task - worker thread to check over tempurature - * @work: pointer to work_struct containing our data + * ixgbe_check_overtemp_subtask - check for over tempurature + * @adapter: pointer to adapter **/ -static void ixgbe_check_overtemp_task(struct work_struct *work) +static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - check_overtemp_task); struct ixgbe_hw *hw = &adapter->hw; u32 eicr = adapter->interrupt_event; - if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)) + if (test_bit(__IXGBE_DOWN, &adapter->state)) return; + if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT; + switch (hw->device_id) { - case IXGBE_DEV_ID_82599_T3_LOM: { - u32 autoneg; - bool link_up = false; + case IXGBE_DEV_ID_82599_T3_LOM: + /* + * Since the warning interrupt is for both ports + * we don't have to check if: + * - This interrupt wasn't for our port. + * - We may have missed the interrupt so always have to + * check if we got a LSC + */ + if (!(eicr & IXGBE_EICR_GPI_SDP0) && + !(eicr & IXGBE_EICR_LSC)) + return; + + if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { + u32 autoneg; + bool link_up = false; - if (hw->mac.ops.check_link) hw->mac.ops.check_link(hw, &autoneg, &link_up, false); - if (((eicr & IXGBE_EICR_GPI_SDP0) && (!link_up)) || - (eicr & IXGBE_EICR_LSC)) - /* Check if this is due to overtemp */ - if (hw->phy.ops.check_overtemp(hw) == IXGBE_ERR_OVERTEMP) - break; - return; - } + if (link_up) + return; + } + + /* Check if this is not due to overtemp */ + if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) + return; + + break; default: if (!(eicr & IXGBE_EICR_GPI_SDP0)) return; @@ -1825,8 +1881,8 @@ static void ixgbe_check_overtemp_task(struct work_struct *work) "Network adapter has been stopped because it has over heated. " "Restart the computer. If the problem persists, " "power off the system and replace the adapter\n"); - /* write to clear the interrupt */ - IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0); + + adapter->interrupt_event = 0; } static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) @@ -1848,15 +1904,19 @@ static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) if (eicr & IXGBE_EICR_GPI_SDP2) { /* Clear the interrupt */ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2); - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - schedule_work(&adapter->sfp_config_module_task); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + ixgbe_service_event_schedule(adapter); + } } if (eicr & IXGBE_EICR_GPI_SDP1) { /* Clear the interrupt */ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - schedule_work(&adapter->multispeed_fiber_task); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; + ixgbe_service_event_schedule(adapter); + } } } @@ -1870,7 +1930,7 @@ static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) if (!test_bit(__IXGBE_DOWN, &adapter->state)) { IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC); IXGBE_WRITE_FLUSH(hw); - schedule_work(&adapter->watchdog_task); + ixgbe_service_event_schedule(adapter); } } @@ -1898,26 +1958,32 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) switch (hw->mac.type) { case ixgbe_mac_82599EB: - ixgbe_check_sfp_event(adapter, eicr); - if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && - ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) { - adapter->interrupt_event = eicr; - schedule_work(&adapter->check_overtemp_task); - } - /* now fallthrough to handle Flow Director */ case ixgbe_mac_X540: /* Handle Flow Director Full threshold interrupt */ if (eicr & IXGBE_EICR_FLOW_DIR) { + int reinit_count = 0; int i; - IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_FLOW_DIR); - /* Disable transmits before FDIR Re-initialization */ - netif_tx_stop_all_queues(netdev); for (i = 0; i < adapter->num_tx_queues; i++) { - struct ixgbe_ring *tx_ring = - adapter->tx_ring[i]; + struct ixgbe_ring *ring = adapter->tx_ring[i]; if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE, - &tx_ring->state)) - schedule_work(&adapter->fdir_reinit_task); + &ring->state)) + reinit_count++; + } + if (reinit_count) { + /* no more flow director interrupts until after init */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR); + eicr &= ~IXGBE_EICR_FLOW_DIR; + adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT; + ixgbe_service_event_schedule(adapter); + } + } + ixgbe_check_sfp_event(adapter, eicr); + if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) { + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->interrupt_event = eicr; + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; + ixgbe_service_event_schedule(adapter); } } break; @@ -1927,8 +1993,10 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) ixgbe_check_fan_failure(adapter, eicr); + /* re-enable the original interrupt state, no lsc, no queues */ if (!test_bit(__IXGBE_DOWN, &adapter->state)) - IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER); + IXGBE_WRITE_REG(hw, IXGBE_EIMS, eicr & + ~(IXGBE_EIMS_LSC | IXGBE_EIMS_RTX_QUEUE)); return IRQ_HANDLED; } @@ -2513,8 +2581,11 @@ static irqreturn_t ixgbe_intr(int irq, void *data) ixgbe_check_sfp_event(adapter, eicr); if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) { - adapter->interrupt_event = eicr; - schedule_work(&adapter->check_overtemp_task); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->interrupt_event = eicr; + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; + ixgbe_service_event_schedule(adapter); + } } break; default: @@ -2731,7 +2802,7 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, /* poll to verify queue is enabled */ do { - msleep(1); + usleep_range(1000, 2000); txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx)); } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE)); if (!wait_loop) @@ -3023,7 +3094,7 @@ static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, return; do { - msleep(1); + usleep_range(1000, 2000); rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE)); @@ -3178,7 +3249,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) /* enable Tx loopback for VF/PF communication */ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); /* Enable MAC Anti-Spoofing */ - hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0), + hw->mac.ops.set_mac_anti_spoofing(hw, + (adapter->antispoofing_enabled = + (adapter->num_vfs != 0)), adapter->num_vfs); } @@ -3487,7 +3560,7 @@ static int ixgbe_write_uc_addr_list(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; unsigned int vfn = adapter->num_vfs; - unsigned int rar_entries = hw->mac.num_rar_entries - (vfn + 1); + unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS; int count = 0; /* return ENOMEM indicating insufficient memory for addresses */ @@ -3760,31 +3833,16 @@ static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) **/ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) { - struct ixgbe_hw *hw = &adapter->hw; + /* + * We are assuming the worst case scenerio here, and that + * is that an SFP was inserted/removed after the reset + * but before SFP detection was enabled. As such the best + * solution is to just start searching as soon as we start + */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; - if (hw->phy.multispeed_fiber) { - /* - * In multispeed fiber setups, the device may not have - * had a physical connection when the driver loaded. - * If that's the case, the initial link configuration - * couldn't get the MAC into 10G or 1G mode, so we'll - * never have a link status change interrupt fire. - * We need to try and force an autonegotiation - * session, then bring up link. - */ - if (hw->mac.ops.setup_sfp) - hw->mac.ops.setup_sfp(hw); - if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) - schedule_work(&adapter->multispeed_fiber_task); - } else { - /* - * Direct Attach Cu and non-multispeed fiber modules - * still need to be configured properly prior to - * attempting link. - */ - if (!(adapter->flags & IXGBE_FLAG_IN_SFP_MOD_TASK)) - schedule_work(&adapter->sfp_config_module_task); - } + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; } /** @@ -3860,9 +3918,10 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) gpie |= IXGBE_SDP1_GPIEN; - if (hw->mac.type == ixgbe_mac_82599EB) + if (hw->mac.type == ixgbe_mac_82599EB) { gpie |= IXGBE_SDP1_GPIEN; gpie |= IXGBE_SDP2_GPIEN; + } IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); } @@ -3913,17 +3972,6 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) e_crit(drv, "Fan has stopped, replace the adapter\n"); } - /* - * For hot-pluggable SFP+ devices, a new SFP+ module may have - * arrived before interrupts were enabled but after probe. Such - * devices wouldn't have their type identified yet. We need to - * kick off the SFP+ module setup first, then try to bring up link. - * If we're not hot-pluggable SFP+, we just need to configure link - * and bring it up. - */ - if (hw->phy.type == ixgbe_phy_none) - schedule_work(&adapter->sfp_config_module_task); - /* enable transmits */ netif_tx_start_all_queues(adapter->netdev); @@ -3931,7 +3979,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) * link up interrupt but shouldn't be a problem */ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; adapter->link_check_timeout = jiffies; - mod_timer(&adapter->watchdog_timer, jiffies); + mod_timer(&adapter->service_timer, jiffies); /* Set PF Reset Done bit so PF/VF Mail Ops can work */ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); @@ -3944,8 +3992,11 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) { WARN_ON(in_interrupt()); + /* put off any impending NetWatchDogTimeout */ + adapter->netdev->trans_start = jiffies; + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) - msleep(1); + usleep_range(1000, 2000); ixgbe_down(adapter); /* * If SR-IOV enabled then wait a bit before bringing the adapter @@ -3972,10 +4023,20 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; int err; + /* lock SFP init bit to prevent race conditions with the watchdog */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + + /* clear all SFP and link config related flags while holding SFP_INIT */ + adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | + IXGBE_FLAG2_SFP_NEEDS_RESET); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + err = hw->mac.ops.init_hw(hw); switch (err) { case 0: case IXGBE_ERR_SFP_NOT_PRESENT: + case IXGBE_ERR_SFP_NOT_SUPPORTED: break; case IXGBE_ERR_MASTER_REQUESTS_PENDING: e_dev_err("master disable timed out\n"); @@ -3993,6 +4054,8 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) e_dev_err("Hardware Error: %d\n", err); } + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + /* reprogram the RAR[0] in case user changed it. */ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs, IXGBE_RAH_AV); @@ -4121,26 +4184,12 @@ void ixgbe_down(struct ixgbe_adapter *adapter) struct net_device *netdev = adapter->netdev; struct ixgbe_hw *hw = &adapter->hw; u32 rxctrl; - u32 txdctl; int i; int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; /* signal that we are down to the interrupt handler */ set_bit(__IXGBE_DOWN, &adapter->state); - /* disable receive for all VFs and wait one second */ - if (adapter->num_vfs) { - /* ping all the active vfs to let them know we are going down */ - ixgbe_ping_all_vfs(adapter); - - /* Disable all VFTE/VFRE TX/RX */ - ixgbe_disable_tx_rx(adapter); - - /* Mark all the VFs as inactive */ - for (i = 0 ; i < adapter->num_vfs; i++) - adapter->vfinfo[i].clear_to_send = 0; - } - /* disable receives */ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); @@ -4150,15 +4199,11 @@ void ixgbe_down(struct ixgbe_adapter *adapter) /* this call also flushes the previous write */ ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); - msleep(10); + usleep_range(10000, 20000); netif_tx_stop_all_queues(netdev); - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - del_timer_sync(&adapter->sfp_timer); - del_timer_sync(&adapter->watchdog_timer); - cancel_work_sync(&adapter->watchdog_task); - + /* call carrier off first to avoid false dev_watchdog timeouts */ netif_carrier_off(netdev); netif_tx_disable(netdev); @@ -4166,6 +4211,25 @@ void ixgbe_down(struct ixgbe_adapter *adapter) ixgbe_napi_disable_all(adapter); + adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT | + IXGBE_FLAG2_RESET_REQUESTED); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + + del_timer_sync(&adapter->service_timer); + + /* disable receive for all VFs and wait one second */ + if (adapter->num_vfs) { + /* ping all the active vfs to let them know we are going down */ + ixgbe_ping_all_vfs(adapter); + + /* Disable all VFTE/VFRE TX/RX */ + ixgbe_disable_tx_rx(adapter); + + /* Mark all the VFs as inactive */ + for (i = 0 ; i < adapter->num_vfs; i++) + adapter->vfinfo[i].clear_to_send = 0; + } + /* Cleanup the affinity_hint CPU mask memory and callback */ for (i = 0; i < num_q_vectors; i++) { struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; @@ -4175,21 +4239,13 @@ void ixgbe_down(struct ixgbe_adapter *adapter) free_cpumask_var(q_vector->affinity_mask); } - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || - adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) - cancel_work_sync(&adapter->fdir_reinit_task); - - if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) - cancel_work_sync(&adapter->check_overtemp_task); - /* disable transmits in the hardware now that interrupts are off */ for (i = 0; i < adapter->num_tx_queues; i++) { u8 reg_idx = adapter->tx_ring[i]->reg_idx; - txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx)); - IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), - (txdctl & ~IXGBE_TXDCTL_ENABLE)); + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); } - /* Disable the Tx DMA engine on 82599 */ + + /* Disable the Tx DMA engine on 82599 and X540 */ switch (hw->mac.type) { case ixgbe_mac_82599EB: case ixgbe_mac_X540: @@ -4201,9 +4257,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter) break; } - /* clear n-tuple filters that are cached */ - ethtool_ntuple_flush(netdev); - if (!pci_channel_offline(adapter->pdev)) ixgbe_reset(adapter); @@ -4267,25 +4320,8 @@ static void ixgbe_tx_timeout(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - adapter->tx_timeout_count++; - /* Do the reset outside of interrupt context */ - schedule_work(&adapter->reset_task); -} - -static void ixgbe_reset_task(struct work_struct *work) -{ - struct ixgbe_adapter *adapter; - adapter = container_of(work, struct ixgbe_adapter, reset_task); - - /* If we're already down or resetting, just bail */ - if (test_bit(__IXGBE_DOWN, &adapter->state) || - test_bit(__IXGBE_RESETTING, &adapter->state)) - return; - - ixgbe_dump(adapter); - netdev_err(adapter->netdev, "Reset adapter\n"); - ixgbe_reinit_locked(adapter); + ixgbe_tx_timeout_reset(adapter); } /** @@ -4567,8 +4603,8 @@ static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter) #ifdef CONFIG_IXGBE_DCB /* ixgbe_get_first_reg_idx - Return first register index associated with ring */ -void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc, - unsigned int *tx, unsigned int *rx) +static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc, + unsigned int *tx, unsigned int *rx) { struct net_device *dev = adapter->netdev; struct ixgbe_hw *hw = &adapter->hw; @@ -5133,57 +5169,6 @@ void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter) } /** - * ixgbe_sfp_timer - worker thread to find a missing module - * @data: pointer to our adapter struct - **/ -static void ixgbe_sfp_timer(unsigned long data) -{ - struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; - - /* - * Do the sfp_timer outside of interrupt context due to the - * delays that sfp+ detection requires - */ - schedule_work(&adapter->sfp_task); -} - -/** - * ixgbe_sfp_task - worker thread to find a missing module - * @work: pointer to work_struct containing our data - **/ -static void ixgbe_sfp_task(struct work_struct *work) -{ - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - sfp_task); - struct ixgbe_hw *hw = &adapter->hw; - - if ((hw->phy.type == ixgbe_phy_nl) && - (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) { - s32 ret = hw->phy.ops.identify_sfp(hw); - if (ret == IXGBE_ERR_SFP_NOT_PRESENT) - goto reschedule; - ret = hw->phy.ops.reset(hw); - if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to initialize because an unsupported " - "SFP+ module type was detected.\n"); - e_dev_err("Reload the driver after installing a " - "supported module.\n"); - unregister_netdev(adapter->netdev); - } else { - e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); - } - /* don't need this routine any more */ - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - } - return; -reschedule: - if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state)) - mod_timer(&adapter->sfp_timer, - round_jiffies(jiffies + (2 * HZ))); -} - -/** * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) * @adapter: board private structure to initialize * @@ -5899,8 +5884,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); break; - case ixgbe_mac_82599EB: case ixgbe_mac_X540: + /* OS2BMC stats are X540 only*/ + hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); + hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); + hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); + hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); + case ixgbe_mac_82599EB: hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); @@ -5974,23 +5964,66 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) } /** - * ixgbe_watchdog - Timer Call-back - * @data: pointer to adapter cast into an unsigned long + * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table + * @adapter - pointer to the device adapter structure **/ -static void ixgbe_watchdog(unsigned long data) +static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; struct ixgbe_hw *hw = &adapter->hw; - u64 eics = 0; int i; - /* - * Do the watchdog outside of interrupt context due to the lovely - * delays that some of the newer hardware requires - */ + if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT; + /* if interface is down do nothing */ if (test_bit(__IXGBE_DOWN, &adapter->state)) - goto watchdog_short_circuit; + return; + + /* do nothing if we are not using signature filters */ + if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) + return; + + adapter->fdir_overflow++; + + if (ixgbe_reinit_fdir_tables_82599(hw) == 0) { + for (i = 0; i < adapter->num_tx_queues; i++) + set_bit(__IXGBE_TX_FDIR_INIT_DONE, + &(adapter->tx_ring[i]->state)); + /* re-enable flow director interrupts */ + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR); + } else { + e_err(probe, "failed to finish FDIR re-initialization, " + "ignored adding FDIR ATR filters\n"); + } +} + +/** + * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts + * @adapter - pointer to the device adapter structure + * + * This function serves two purposes. First it strobes the interrupt lines + * in order to make certain interrupts are occuring. Secondly it sets the + * bits needed to check for TX hangs. As a result we should immediately + * determine if a hang has occured. + */ +static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u64 eics = 0; + int i; + + /* If we're down or resetting, just bail */ + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + + /* Force detection of hung controller */ + if (netif_carrier_ok(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + set_check_for_tx_hang(adapter->tx_ring[i]); + } if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { /* @@ -6000,108 +6033,172 @@ static void ixgbe_watchdog(unsigned long data) */ IXGBE_WRITE_REG(hw, IXGBE_EICS, (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); - goto watchdog_reschedule; - } - - /* get one bit for every active tx/rx interrupt vector */ - for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) { - struct ixgbe_q_vector *qv = adapter->q_vector[i]; - if (qv->rxr_count || qv->txr_count) - eics |= ((u64)1 << i); + } else { + /* get one bit for every active tx/rx interrupt vector */ + for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) { + struct ixgbe_q_vector *qv = adapter->q_vector[i]; + if (qv->rxr_count || qv->txr_count) + eics |= ((u64)1 << i); + } } - /* Cause software interrupt to ensure rx rings are cleaned */ + /* Cause software interrupt to ensure rings are cleaned */ ixgbe_irq_rearm_queues(adapter, eics); -watchdog_reschedule: - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ)); - -watchdog_short_circuit: - schedule_work(&adapter->watchdog_task); } /** - * ixgbe_multispeed_fiber_task - worker thread to configure multispeed fiber - * @work: pointer to work_struct containing our data + * ixgbe_watchdog_update_link - update the link status + * @adapter - pointer to the device adapter structure + * @link_speed - pointer to a u32 to store the link_speed **/ -static void ixgbe_multispeed_fiber_task(struct work_struct *work) +static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - multispeed_fiber_task); struct ixgbe_hw *hw = &adapter->hw; - u32 autoneg; - bool negotiation; + u32 link_speed = adapter->link_speed; + bool link_up = adapter->link_up; + int i; - adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK; - autoneg = hw->phy.autoneg_advertised; - if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); - hw->mac.autotry_restart = false; - if (hw->mac.ops.setup_link) - hw->mac.ops.setup_link(hw, autoneg, negotiation, true); - adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; - adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK; + if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) + return; + + if (hw->mac.ops.check_link) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + } else { + /* always assume link is up, if no check link function */ + link_speed = IXGBE_LINK_SPEED_10GB_FULL; + link_up = true; + } + if (link_up) { + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + hw->mac.ops.fc_enable(hw, i); + } else { + hw->mac.ops.fc_enable(hw, 0); + } + } + + if (link_up || + time_after(jiffies, (adapter->link_check_timeout + + IXGBE_TRY_LINK_TIMEOUT))) { + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); + IXGBE_WRITE_FLUSH(hw); + } + + adapter->link_up = link_up; + adapter->link_speed = link_speed; } /** - * ixgbe_sfp_config_module_task - worker thread to configure a new SFP+ module - * @work: pointer to work_struct containing our data + * ixgbe_watchdog_link_is_up - update netif_carrier status and + * print link up message + * @adapter - pointer to the device adapter structure **/ -static void ixgbe_sfp_config_module_task(struct work_struct *work) +static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - sfp_config_module_task); + struct net_device *netdev = adapter->netdev; struct ixgbe_hw *hw = &adapter->hw; - u32 err; + u32 link_speed = adapter->link_speed; + bool flow_rx, flow_tx; - adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK; + /* only continue if link was previously down */ + if (netif_carrier_ok(netdev)) + return; - /* Time for electrical oscillations to settle down */ - msleep(100); - err = hw->phy.ops.identify_sfp(hw); + adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to initialize because an unsupported SFP+ " - "module type was detected.\n"); - e_dev_err("Reload the driver after installing a supported " - "module.\n"); - unregister_netdev(adapter->netdev); - return; + switch (hw->mac.type) { + case ixgbe_mac_82598EB: { + u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); + flow_rx = !!(frctl & IXGBE_FCTRL_RFCE); + flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); + } + break; + case ixgbe_mac_X540: + case ixgbe_mac_82599EB: { + u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); + u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); + flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE); + flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X); + } + break; + default: + flow_tx = false; + flow_rx = false; + break; } - if (hw->mac.ops.setup_sfp) - hw->mac.ops.setup_sfp(hw); + e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", + (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? + "10 Gbps" : + (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? + "1 Gbps" : + (link_speed == IXGBE_LINK_SPEED_100_FULL ? + "100 Mbps" : + "unknown speed"))), + ((flow_rx && flow_tx) ? "RX/TX" : + (flow_rx ? "RX" : + (flow_tx ? "TX" : "None")))); - if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) - /* This will also work for DA Twinax connections */ - schedule_work(&adapter->multispeed_fiber_task); - adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK; + netif_carrier_on(netdev); +#ifdef HAVE_IPLINK_VF_CONFIG + ixgbe_check_vf_rate_limit(adapter); +#endif /* HAVE_IPLINK_VF_CONFIG */ } /** - * ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table - * @work: pointer to work_struct containing our data + * ixgbe_watchdog_link_is_down - update netif_carrier status and + * print link down message + * @adapter - pointer to the adapter structure **/ -static void ixgbe_fdir_reinit_task(struct work_struct *work) +static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter) { - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - fdir_reinit_task); + struct net_device *netdev = adapter->netdev; struct ixgbe_hw *hw = &adapter->hw; + + adapter->link_up = false; + adapter->link_speed = 0; + + /* only continue if link was up previously */ + if (!netif_carrier_ok(netdev)) + return; + + /* poll for SFP+ cable when link is down */ + if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) + adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; + + e_info(drv, "NIC Link is Down\n"); + netif_carrier_off(netdev); +} + +/** + * ixgbe_watchdog_flush_tx - flush queues on link down + * @adapter - pointer to the device adapter structure + **/ +static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) +{ int i; + int some_tx_pending = 0; - if (ixgbe_reinit_fdir_tables_82599(hw) == 0) { - for (i = 0; i < adapter->num_tx_queues; i++) - set_bit(__IXGBE_TX_FDIR_INIT_DONE, - &(adapter->tx_ring[i]->state)); - } else { - e_err(probe, "failed to finish FDIR re-initialization, " - "ignored adding FDIR ATR filters\n"); + if (!netif_carrier_ok(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + if (tx_ring->next_to_use != tx_ring->next_to_clean) { + some_tx_pending = 1; + break; + } + } + + if (some_tx_pending) { + /* We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). + */ + adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; + } } - /* Done FDIR Re-initialization, enable transmits */ - netif_tx_start_all_queues(adapter->netdev); } static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) @@ -6124,133 +6221,186 @@ static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) e_warn(drv, "%d Spoofed packets detected\n", ssvpc); } -static DEFINE_MUTEX(ixgbe_watchdog_lock); +/** + * ixgbe_watchdog_subtask - check and bring link up + * @adapter - pointer to the device adapter structure + **/ +static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) +{ + /* if interface is down do nothing */ + if (test_bit(__IXGBE_DOWN, &adapter->state)) + return; + + ixgbe_watchdog_update_link(adapter); + + if (adapter->link_up) + ixgbe_watchdog_link_is_up(adapter); + else + ixgbe_watchdog_link_is_down(adapter); + + ixgbe_spoof_check(adapter); + ixgbe_update_stats(adapter); + + ixgbe_watchdog_flush_tx(adapter); +} /** - * ixgbe_watchdog_task - worker thread to bring link up - * @work: pointer to work_struct containing our data + * ixgbe_sfp_detection_subtask - poll for SFP+ cable + * @adapter - the ixgbe adapter structure **/ -static void ixgbe_watchdog_task(struct work_struct *work) +static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - watchdog_task); - struct net_device *netdev = adapter->netdev; struct ixgbe_hw *hw = &adapter->hw; - u32 link_speed; - bool link_up; - int i; - struct ixgbe_ring *tx_ring; - int some_tx_pending = 0; + s32 err; - mutex_lock(&ixgbe_watchdog_lock); + /* not searching for SFP so there is nothing to do here */ + if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) && + !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) + return; - link_up = adapter->link_up; - link_speed = adapter->link_speed; + /* someone else is in init, wait until next service event */ + if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return; - if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - if (link_up) { -#ifdef CONFIG_DCB - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - for (i = 0; i < MAX_TRAFFIC_CLASS; i++) - hw->mac.ops.fc_enable(hw, i); - } else { - hw->mac.ops.fc_enable(hw, 0); - } -#else - hw->mac.ops.fc_enable(hw, 0); -#endif - } + err = hw->phy.ops.identify_sfp(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto sfp_out; - if (link_up || - time_after(jiffies, (adapter->link_check_timeout + - IXGBE_TRY_LINK_TIMEOUT))) { - adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; - IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); - } - adapter->link_up = link_up; - adapter->link_speed = link_speed; + if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + /* If no cable is present, then we need to reset + * the next time we find a good cable. */ + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; } - if (link_up) { - if (!netif_carrier_ok(netdev)) { - bool flow_rx, flow_tx; - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: { - u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); - flow_rx = !!(frctl & IXGBE_FCTRL_RFCE); - flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); - } - break; - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: { - u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); - u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); - flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE); - flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X); - } - break; - default: - flow_tx = false; - flow_rx = false; - break; - } + /* exit on error */ + if (err) + goto sfp_out; - e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", - (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? - "10 Gbps" : - (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? - "1 Gbps" : - (link_speed == IXGBE_LINK_SPEED_100_FULL ? - "100 Mbps" : - "unknown speed"))), - ((flow_rx && flow_tx) ? "RX/TX" : - (flow_rx ? "RX" : - (flow_tx ? "TX" : "None")))); - - netif_carrier_on(netdev); - ixgbe_check_vf_rate_limit(adapter); - } else { - /* Force detection of hung controller */ - for (i = 0; i < adapter->num_tx_queues; i++) { - tx_ring = adapter->tx_ring[i]; - set_check_for_tx_hang(tx_ring); - } - } - } else { - adapter->link_up = false; - adapter->link_speed = 0; - if (netif_carrier_ok(netdev)) { - e_info(drv, "NIC Link is Down\n"); - netif_carrier_off(netdev); - } - } + /* exit if reset not needed */ + if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) + goto sfp_out; - if (!netif_carrier_ok(netdev)) { - for (i = 0; i < adapter->num_tx_queues; i++) { - tx_ring = adapter->tx_ring[i]; - if (tx_ring->next_to_use != tx_ring->next_to_clean) { - some_tx_pending = 1; - break; - } - } + adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET; - if (some_tx_pending) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). - */ - schedule_work(&adapter->reset_task); - } + /* + * A module may be identified correctly, but the EEPROM may not have + * support for that module. setup_sfp() will fail in that case, so + * we should not allow that module to load. + */ + if (hw->mac.type == ixgbe_mac_82598EB) + err = hw->phy.ops.reset(hw); + else + err = hw->mac.ops.setup_sfp(hw); + + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto sfp_out; + + adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; + e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); + +sfp_out: + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + + if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && + (adapter->netdev->reg_state == NETREG_REGISTERED)) { + e_dev_err("failed to initialize because an unsupported " + "SFP+ module type was detected.\n"); + e_dev_err("Reload the driver after installing a " + "supported module.\n"); + unregister_netdev(adapter->netdev); } +} - ixgbe_spoof_check(adapter); - ixgbe_update_stats(adapter); - mutex_unlock(&ixgbe_watchdog_lock); +/** + * ixgbe_sfp_link_config_subtask - set up link SFP after module install + * @adapter - the ixgbe adapter structure + **/ +static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 autoneg; + bool negotiation; + + if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) + return; + + /* someone else is in init, wait until next service event */ + if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return; + + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + + autoneg = hw->phy.autoneg_advertised; + if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) + hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); + hw->mac.autotry_restart = false; + if (hw->mac.ops.setup_link) + hw->mac.ops.setup_link(hw, autoneg, negotiation, true); + + adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); +} + +/** + * ixgbe_service_timer - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void ixgbe_service_timer(unsigned long data) +{ + struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; + unsigned long next_event_offset; + + /* poll faster when waiting for link */ + if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) + next_event_offset = HZ / 10; + else + next_event_offset = HZ * 2; + + /* Reset the timer */ + mod_timer(&adapter->service_timer, next_event_offset + jiffies); + + ixgbe_service_event_schedule(adapter); +} + +static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) +{ + if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED; + + /* If we're already down or resetting, just bail */ + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + + ixgbe_dump(adapter); + netdev_err(adapter->netdev, "Reset adapter\n"); + adapter->tx_timeout_count++; + + ixgbe_reinit_locked(adapter); +} + +/** + * ixgbe_service_task - manages and runs subtasks + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_service_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + service_task); + + ixgbe_reset_subtask(adapter); + ixgbe_sfp_detection_subtask(adapter); + ixgbe_sfp_link_config_subtask(adapter); + ixgbe_check_overtemp_subtask(adapter); + ixgbe_watchdog_subtask(adapter); + ixgbe_fdir_reinit_subtask(adapter); + ixgbe_check_hang_subtask(adapter); + + ixgbe_service_event_complete(adapter); } static int ixgbe_tso(struct ixgbe_adapter *adapter, @@ -7089,6 +7239,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter, #ifdef CONFIG_PCI_IOV struct ixgbe_hw *hw = &adapter->hw; int err; + int num_vf_macvlans, i; + struct vf_macvlans *mv_list; if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs) return; @@ -7105,6 +7257,26 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter, e_err(probe, "Failed to enable PCI sriov: %d\n", err); goto err_novfs; } + + num_vf_macvlans = hw->mac.num_rar_entries - + (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs); + + adapter->mv_list = mv_list = kcalloc(num_vf_macvlans, + sizeof(struct vf_macvlans), + GFP_KERNEL); + if (mv_list) { + /* Initialize list of VF macvlans */ + INIT_LIST_HEAD(&adapter->vf_mvs.l); + for (i = 0; i < num_vf_macvlans; i++) { + mv_list->vf = -1; + mv_list->free = true; + mv_list->rar_entry = hw->mac.num_rar_entries - + (i + adapter->num_vfs + 1); + list_add(&mv_list->l, &adapter->vf_mvs.l); + mv_list++; + } + } + /* If call to enable VFs succeeded then allocate memory * for per VF control structures. */ @@ -7275,22 +7447,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->phy.mdio.mdio_read = ixgbe_mdio_read; hw->phy.mdio.mdio_write = ixgbe_mdio_write; - /* set up this timer and work struct before calling get_invariants - * which might start the timer - */ - init_timer(&adapter->sfp_timer); - adapter->sfp_timer.function = ixgbe_sfp_timer; - adapter->sfp_timer.data = (unsigned long) adapter; - - INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task); - - /* multispeed fiber has its own tasklet, called from GPI SDP1 context */ - INIT_WORK(&adapter->multispeed_fiber_task, ixgbe_multispeed_fiber_task); - - /* a new SFP+ module arrival, called from GPI SDP2 context */ - INIT_WORK(&adapter->sfp_config_module_task, - ixgbe_sfp_config_module_task); - ii->get_invariants(hw); /* setup the private structure */ @@ -7324,17 +7480,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->phy.reset_if_overtemp = false; if (err == IXGBE_ERR_SFP_NOT_PRESENT && hw->mac.type == ixgbe_mac_82598EB) { - /* - * Start a kernel thread to watch for a module to arrive. - * Only do this for 82598, since 82599 will generate - * interrupts on module arrival. - */ - set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - mod_timer(&adapter->sfp_timer, - round_jiffies(jiffies + (2 * HZ))); err = 0; } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to initialize because an unsupported SFP+ " + e_dev_err("failed to load because an unsupported SFP+ " "module type was detected.\n"); e_dev_err("Reload the driver after installing a supported " "module.\n"); @@ -7356,9 +7504,16 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; netdev->features |= NETIF_F_GRO; + netdev->features |= NETIF_F_RXHASH; - if (adapter->hw.mac.type == ixgbe_mac_82599EB) + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: netdev->features |= NETIF_F_SCTP_CSUM; + break; + default: + break; + } netdev->vlan_features |= NETIF_F_TSO; netdev->vlan_features |= NETIF_F_TSO6; @@ -7419,17 +7574,19 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, (hw->mac.type == ixgbe_mac_82599EB)))) hw->mac.ops.disable_tx_laser(hw); - init_timer(&adapter->watchdog_timer); - adapter->watchdog_timer.function = ixgbe_watchdog; - adapter->watchdog_timer.data = (unsigned long)adapter; + setup_timer(&adapter->service_timer, &ixgbe_service_timer, + (unsigned long) adapter); - INIT_WORK(&adapter->reset_task, ixgbe_reset_task); - INIT_WORK(&adapter->watchdog_task, ixgbe_watchdog_task); + INIT_WORK(&adapter->service_task, ixgbe_service_task); + clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); err = ixgbe_init_interrupt_scheme(adapter); if (err) goto err_sw_init; + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) + netdev->features &= ~NETIF_F_RXHASH; + switch (pdev->device) { case IXGBE_DEV_ID_82599_SFP: /* Only this subdevice supports WOL */ @@ -7458,8 +7615,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* print bus type/speed/width info */ e_dev_info("(PCI Express:%s:%s) %pM\n", - (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0Gb/s" : - hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5Gb/s" : + (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : + hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : "Unknown"), (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : @@ -7508,13 +7665,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || - adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) - INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task); - - if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) - INIT_WORK(&adapter->check_overtemp_task, - ixgbe_check_overtemp_task); #ifdef CONFIG_IXGBE_DCA if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IXGBE_FLAG_DCA_ENABLED; @@ -7541,11 +7691,7 @@ err_sw_init: err_eeprom: if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) ixgbe_disable_sriov(adapter); - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - del_timer_sync(&adapter->sfp_timer); - cancel_work_sync(&adapter->sfp_task); - cancel_work_sync(&adapter->multispeed_fiber_task); - cancel_work_sync(&adapter->sfp_config_module_task); + adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); @@ -7573,24 +7719,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) struct net_device *netdev = adapter->netdev; set_bit(__IXGBE_DOWN, &adapter->state); - - /* - * The timers may be rescheduled, so explicitly disable them - * from being rescheduled. - */ - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->sfp_timer); - - cancel_work_sync(&adapter->watchdog_task); - cancel_work_sync(&adapter->sfp_task); - cancel_work_sync(&adapter->multispeed_fiber_task); - cancel_work_sync(&adapter->sfp_config_module_task); - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || - adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) - cancel_work_sync(&adapter->fdir_reinit_task); - if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) - cancel_work_sync(&adapter->check_overtemp_task); + cancel_work_sync(&adapter->service_task); #ifdef CONFIG_IXGBE_DCA if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |