diff options
Diffstat (limited to 'drivers/net/irda/smsc-ircc2.h')
| -rw-r--r-- | drivers/net/irda/smsc-ircc2.h | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/drivers/net/irda/smsc-ircc2.h b/drivers/net/irda/smsc-ircc2.h deleted file mode 100644 index 4829fa22cb29..000000000000 --- a/drivers/net/irda/smsc-ircc2.h +++ /dev/null @@ -1,191 +0,0 @@ -/********************************************************************* - * - * Description: Definitions for the SMC IrCC chipset - * Status: Experimental. - * Author: Daniele Peri (peri@csai.unipa.it) - * - * Copyright (c) 2002 Daniele Peri - * All Rights Reserved. - * - * Based on smc-ircc.h: - * - * Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no> - * Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net> - * All Rights Reserved - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#ifndef SMSC_IRCC2_H -#define SMSC_IRCC2_H - -/* DMA modes needed */ -#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */ -#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */ - -/* Master Control Register */ -#define IRCC_MASTER 0x07 -#define IRCC_MASTER_POWERDOWN 0x80 -#define IRCC_MASTER_RESET 0x40 -#define IRCC_MASTER_INT_EN 0x20 -#define IRCC_MASTER_ERROR_RESET 0x10 - -/* Register block 0 */ - -/* Interrupt Identification */ -#define IRCC_IIR 0x01 -#define IRCC_IIR_ACTIVE_FRAME 0x80 -#define IRCC_IIR_EOM 0x40 -#define IRCC_IIR_RAW_MODE 0x20 -#define IRCC_IIR_FIFO 0x10 - -/* Interrupt Enable */ -#define IRCC_IER 0x02 -#define IRCC_IER_ACTIVE_FRAME 0x80 -#define IRCC_IER_EOM 0x40 -#define IRCC_IER_RAW_MODE 0x20 -#define IRCC_IER_FIFO 0x10 - -/* Line Status Register */ -#define IRCC_LSR 0x03 -#define IRCC_LSR_UNDERRUN 0x80 -#define IRCC_LSR_OVERRUN 0x40 -#define IRCC_LSR_FRAME_ERROR 0x20 -#define IRCC_LSR_SIZE_ERROR 0x10 -#define IRCC_LSR_CRC_ERROR 0x80 -#define IRCC_LSR_FRAME_ABORT 0x40 - -/* Line Status Address Register */ -#define IRCC_LSAR 0x03 -#define IRCC_LSAR_ADDRESS_MASK 0x07 - -/* Line Control Register A */ -#define IRCC_LCR_A 0x04 -#define IRCC_LCR_A_FIFO_RESET 0x80 -#define IRCC_LCR_A_FAST 0x40 -#define IRCC_LCR_A_GP_DATA 0x20 -#define IRCC_LCR_A_RAW_TX 0x10 -#define IRCC_LCR_A_RAW_RX 0x08 -#define IRCC_LCR_A_ABORT 0x04 -#define IRCC_LCR_A_DATA_DONE 0x02 - -/* Line Control Register B */ -#define IRCC_LCR_B 0x05 -#define IRCC_LCR_B_SCE_DISABLED 0x00 -#define IRCC_LCR_B_SCE_TRANSMIT 0x40 -#define IRCC_LCR_B_SCE_RECEIVE 0x80 -#define IRCC_LCR_B_SCE_UNDEFINED 0xc0 -#define IRCC_LCR_B_SIP_ENABLE 0x20 -#define IRCC_LCR_B_BRICK_WALL 0x10 - -/* Bus Status Register */ -#define IRCC_BSR 0x06 -#define IRCC_BSR_NOT_EMPTY 0x80 -#define IRCC_BSR_FIFO_FULL 0x40 -#define IRCC_BSR_TIMEOUT 0x20 - -/* Register block 1 */ - -#define IRCC_FIFO_THRESHOLD 0x02 - -#define IRCC_SCE_CFGA 0x00 -#define IRCC_CFGA_AUX_IR 0x80 -#define IRCC_CFGA_HALF_DUPLEX 0x04 -#define IRCC_CFGA_TX_POLARITY 0x02 -#define IRCC_CFGA_RX_POLARITY 0x01 - -#define IRCC_CFGA_COM 0x00 -#define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87 -#define IRCC_CFGA_IRDA_SIR_A 0x08 -#define IRCC_CFGA_ASK_SIR 0x10 -#define IRCC_CFGA_IRDA_SIR_B 0x18 -#define IRCC_CFGA_IRDA_HDLC 0x20 -#define IRCC_CFGA_IRDA_4PPM 0x28 -#define IRCC_CFGA_CONSUMER 0x30 -#define IRCC_CFGA_RAW_IR 0x38 -#define IRCC_CFGA_OTHER 0x40 - -#define IRCC_IR_HDLC 0x04 -#define IRCC_IR_4PPM 0x01 -#define IRCC_IR_CONSUMER 0x02 - -#define IRCC_SCE_CFGB 0x01 -#define IRCC_CFGB_LOOPBACK 0x20 -#define IRCC_CFGB_LPBCK_TX_CRC 0x10 -#define IRCC_CFGB_NOWAIT 0x08 -#define IRCC_CFGB_STRING_MOVE 0x04 -#define IRCC_CFGB_DMA_BURST 0x02 -#define IRCC_CFGB_DMA_ENABLE 0x01 - -#define IRCC_CFGB_MUX_COM 0x00 -#define IRCC_CFGB_MUX_IR 0x40 -#define IRCC_CFGB_MUX_AUX 0x80 -#define IRCC_CFGB_MUX_INACTIVE 0xc0 - -/* Register block 3 - Identification Registers! */ -#define IRCC_ID_HIGH 0x00 /* 0x10 */ -#define IRCC_ID_LOW 0x01 /* 0xB8 */ -#define IRCC_CHIP_ID 0x02 /* 0xF1 */ -#define IRCC_VERSION 0x03 /* 0x01 */ -#define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */ -#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */ -#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */ - -/* Register block 4 - IrDA */ -#define IRCC_CONTROL 0x00 -#define IRCC_BOF_COUNT_LO 0x01 /* Low byte */ -#define IRCC_BOF_COUNT_HI 0x00 /* High nibble (bit 0-3) */ -#define IRCC_BRICKWALL_CNT_LO 0x02 /* Low byte */ -#define IRCC_BRICKWALL_CNT_HI 0x03 /* High nibble (bit 4-7) */ -#define IRCC_TX_SIZE_LO 0x04 /* Low byte */ -#define IRCC_TX_SIZE_HI 0x03 /* High nibble (bit 0-3) */ -#define IRCC_RX_SIZE_HI 0x05 /* High nibble (bit 0-3) */ -#define IRCC_RX_SIZE_LO 0x06 /* Low byte */ - -#define IRCC_1152 0x80 -#define IRCC_CRC 0x40 - -/* Register block 5 - IrDA */ -#define IRCC_ATC 0x00 -#define IRCC_ATC_nPROGREADY 0x80 -#define IRCC_ATC_SPEED 0x40 -#define IRCC_ATC_ENABLE 0x20 -#define IRCC_ATC_MASK 0xE0 - - -#define IRCC_IRHALFDUPLEX_TIMEOUT 0x01 - -#define IRCC_SCE_TX_DELAY_TIMER 0x02 - -/* - * Other definitions - */ - -#define SMSC_IRCC2_MAX_SIR_SPEED 115200 -#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8 -#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8 -#define SMSC_IRCC2_FIFO_SIZE 16 -#define SMSC_IRCC2_FIFO_THRESHOLD 64 -/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ -#define SMSC_IRCC2_RX_BUFF_TRUESIZE 14384 -#define SMSC_IRCC2_TX_BUFF_TRUESIZE 14384 -#define SMSC_IRCC2_MIN_TURN_TIME 0x07 -#define SMSC_IRCC2_WINDOW_SIZE 0x07 -/* Maximum wait for hw transmitter to finish */ -#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US 1000 /* 1 ms */ -/* Maximum wait for ATC transceiver programming to finish */ -#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1 -#endif /* SMSC_IRCC2_H */ |