diff options
Diffstat (limited to 'drivers/net/irda/nsc-ircc.h')
| -rw-r--r-- | drivers/net/irda/nsc-ircc.h | 281 |
1 files changed, 0 insertions, 281 deletions
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h deleted file mode 100644 index 7be5acb56532..000000000000 --- a/drivers/net/irda/nsc-ircc.h +++ /dev/null @@ -1,281 +0,0 @@ -/********************************************************************* - * - * Filename: nsc-ircc.h - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Fri Nov 13 14:37:40 1998 - * Modified at: Sun Jan 23 17:47:00 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no> - * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com> - * Copyright (c) 1998 Actisys Corp., www.actisys.com - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#ifndef NSC_IRCC_H -#define NSC_IRCC_H - -#include <linux/ktime.h> - -#include <linux/spinlock.h> -#include <linux/pm.h> -#include <linux/types.h> -#include <asm/io.h> - -/* Features for chips (set in driver_data) */ -#define NSC_FORCE_DONGLE_TYPE9 0x00000001 - -/* DMA modes needed */ -#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */ -#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */ - -/* Config registers for the '108 */ -#define CFG_108_BAIC 0x00 -#define CFG_108_CSRT 0x01 -#define CFG_108_MCTL 0x02 - -/* Config registers for the '338 */ -#define CFG_338_FER 0x00 -#define CFG_338_FAR 0x01 -#define CFG_338_PTR 0x02 -#define CFG_338_PNP0 0x1b -#define CFG_338_PNP1 0x1c -#define CFG_338_PNP3 0x4f - -/* Config registers for the '39x (in the logical device bank) */ -#define CFG_39X_LDN 0x07 /* Logical device number (Super I/O bank) */ -#define CFG_39X_SIOCF1 0x21 /* SuperI/O Config */ -#define CFG_39X_ACT 0x30 /* Device activation */ -#define CFG_39X_BASEH 0x60 /* Device base address (high bits) */ -#define CFG_39X_BASEL 0x61 /* Device base address (low bits) */ -#define CFG_39X_IRQNUM 0x70 /* Interrupt number & wake up enable */ -#define CFG_39X_IRQSEL 0x71 /* Interrupt select (edge/level + polarity) */ -#define CFG_39X_DMA0 0x74 /* DMA 0 configuration */ -#define CFG_39X_DMA1 0x75 /* DMA 1 configuration */ -#define CFG_39X_SPC 0xF0 /* Serial port configuration register */ - -/* Flags for configuration register CRF0 */ -#define APEDCRC 0x02 -#define ENBNKSEL 0x01 - -/* Set 0 */ -#define TXD 0x00 /* Transmit data port */ -#define RXD 0x00 /* Receive data port */ - -/* Register 1 */ -#define IER 0x01 /* Interrupt Enable Register*/ -#define IER_RXHDL_IE 0x01 /* Receiver high data level interrupt */ -#define IER_TXLDL_IE 0x02 /* Transeiver low data level interrupt */ -#define IER_LS_IE 0x04//* Link Status Interrupt */ -#define IER_ETXURI 0x04 /* Tx underrun */ -#define IER_DMA_IE 0x10 /* DMA finished interrupt */ -#define IER_TXEMP_IE 0x20 -#define IER_SFIF_IE 0x40 /* Frame status FIFO intr */ -#define IER_TMR_IE 0x80 /* Timer event */ - -#define FCR 0x02 /* (write only) */ -#define FCR_FIFO_EN 0x01 /* Enable FIFO's */ -#define FCR_RXSR 0x02 /* Rx FIFO soft reset */ -#define FCR_TXSR 0x04 /* Tx FIFO soft reset */ -#define FCR_RXTH 0x40 /* Rx FIFO threshold (set to 16) */ -#define FCR_TXTH 0x20 /* Tx FIFO threshold (set to 17) */ - -#define EIR 0x02 /* (read only) */ -#define EIR_RXHDL_EV 0x01 -#define EIR_TXLDL_EV 0x02 -#define EIR_LS_EV 0x04 -#define EIR_DMA_EV 0x10 -#define EIR_TXEMP_EV 0x20 -#define EIR_SFIF_EV 0x40 -#define EIR_TMR_EV 0x80 - -#define LCR 0x03 /* Link control register */ -#define LCR_WLS_8 0x03 /* 8 bits */ - -#define BSR 0x03 /* Bank select register */ -#define BSR_BKSE 0x80 -#define BANK0 LCR_WLS_8 /* Must make sure that we set 8N1 */ -#define BANK1 0x80 -#define BANK2 0xe0 -#define BANK3 0xe4 -#define BANK4 0xe8 -#define BANK5 0xec -#define BANK6 0xf0 -#define BANK7 0xf4 - -#define MCR 0x04 /* Mode Control Register */ -#define MCR_MODE_MASK ~(0xd0) -#define MCR_UART 0x00 -#define MCR_RESERVED 0x20 -#define MCR_SHARP_IR 0x40 -#define MCR_SIR 0x60 -#define MCR_MIR 0x80 -#define MCR_FIR 0xa0 -#define MCR_CEIR 0xb0 -#define MCR_IR_PLS 0x10 -#define MCR_DMA_EN 0x04 -#define MCR_EN_IRQ 0x08 -#define MCR_TX_DFR 0x08 - -#define LSR 0x05 /* Link status register */ -#define LSR_RXDA 0x01 /* Receiver data available */ -#define LSR_TXRDY 0x20 /* Transmitter ready */ -#define LSR_TXEMP 0x40 /* Transmitter empty */ - -#define ASCR 0x07 /* Auxiliary Status and Control Register */ -#define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */ -#define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */ -#define ASCR_S_EOT 0x04 /* Set end of transmission */ -#define ASCT_RXBSY 0x20 /* Rx busy */ -#define ASCR_TXUR 0x40 /* Transeiver underrun */ -#define ASCR_CTE 0x80 /* Clear timer event */ - -/* Bank 2 */ -#define BGDL 0x00 /* Baud Generator Divisor Port (Low Byte) */ -#define BGDH 0x01 /* Baud Generator Divisor Port (High Byte) */ - -#define ECR1 0x02 /* Extended Control Register 1 */ -#define ECR1_EXT_SL 0x01 /* Extended Mode Select */ -#define ECR1_DMANF 0x02 /* DMA Fairness */ -#define ECR1_DMATH 0x04 /* DMA Threshold */ -#define ECR1_DMASWP 0x08 /* DMA Swap */ - -#define EXCR2 0x04 -#define EXCR2_TFSIZ 0x01 /* Rx FIFO size = 32 */ -#define EXCR2_RFSIZ 0x04 /* Tx FIFO size = 32 */ - -#define TXFLV 0x06 /* Tx FIFO level */ -#define RXFLV 0x07 /* Rx FIFO level */ - -/* Bank 3 */ -#define MID 0x00 - -/* Bank 4 */ -#define TMRL 0x00 /* Timer low byte */ -#define TMRH 0x01 /* Timer high byte */ -#define IRCR1 0x02 /* Infrared control register 1 */ -#define IRCR1_TMR_EN 0x01 /* Timer enable */ - -#define TFRLL 0x04 -#define TFRLH 0x05 -#define RFRLL 0x06 -#define RFRLH 0x07 - -/* Bank 5 */ -#define IRCR2 0x04 /* Infrared control register 2 */ -#define IRCR2_MDRS 0x04 /* MIR data rate select */ -#define IRCR2_FEND_MD 0x20 /* */ - -#define FRM_ST 0x05 /* Frame status FIFO */ -#define FRM_ST_VLD 0x80 /* Frame status FIFO data valid */ -#define FRM_ST_ERR_MSK 0x5f -#define FRM_ST_LOST_FR 0x40 /* Frame lost */ -#define FRM_ST_MAX_LEN 0x10 /* Max frame len exceeded */ -#define FRM_ST_PHY_ERR 0x08 /* Physical layer error */ -#define FRM_ST_BAD_CRC 0x04 -#define FRM_ST_OVR1 0x02 /* Rx FIFO overrun */ -#define FRM_ST_OVR2 0x01 /* Frame status FIFO overrun */ - -#define RFLFL 0x06 -#define RFLFH 0x07 - -/* Bank 6 */ -#define IR_CFG2 0x00 -#define IR_CFG2_DIS_CRC 0x02 - -/* Bank 7 */ -#define IRM_CR 0x07 /* Infrared module control register */ -#define IRM_CR_IRX_MSL 0x40 -#define IRM_CR_AF_MNT 0x80 /* Automatic format */ - -/* NSC chip information */ -struct nsc_chip { - char *name; /* Name of chipset */ - int cfg[3]; /* Config registers */ - u_int8_t cid_index; /* Chip identification index reg */ - u_int8_t cid_value; /* Chip identification expected value */ - u_int8_t cid_mask; /* Chip identification revision mask */ - - /* Functions for probing and initializing the specific chip */ - int (*probe)(struct nsc_chip *chip, chipio_t *info); - int (*init)(struct nsc_chip *chip, chipio_t *info); -}; -typedef struct nsc_chip nsc_chip_t; - -/* For storing entries in the status FIFO */ -struct st_fifo_entry { - int status; - int len; -}; - -#define MAX_TX_WINDOW 7 -#define MAX_RX_WINDOW 7 - -struct st_fifo { - struct st_fifo_entry entries[MAX_RX_WINDOW]; - int pending_bytes; - int head; - int tail; - int len; -}; - -struct frame_cb { - void *start; /* Start of frame in DMA mem */ - int len; /* Length of frame in DMA mem */ -}; - -struct tx_fifo { - struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */ - int ptr; /* Currently being sent */ - int len; /* Length of queue */ - int free; /* Next free slot */ - void *tail; /* Next free start in DMA mem */ -}; - -/* Private data for each instance */ -struct nsc_ircc_cb { - struct st_fifo st_fifo; /* Info about received frames */ - struct tx_fifo tx_fifo; /* Info about frames to be transmitted */ - - struct net_device *netdev; /* Yes! we are some kind of netdevice */ - - struct irlap_cb *irlap; /* The link layer we are binded to */ - struct qos_info qos; /* QoS capabilities for this device */ - - chipio_t io; /* IrDA controller information */ - iobuff_t tx_buff; /* Transmit buffer */ - iobuff_t rx_buff; /* Receive buffer */ - dma_addr_t tx_buff_dma; - dma_addr_t rx_buff_dma; - - __u8 ier; /* Interrupt enable register */ - - ktime_t stamp; - - spinlock_t lock; /* For serializing operations */ - - __u32 new_speed; - int index; /* Instance index */ - - struct platform_device *pldev; -}; - -static inline void switch_bank(int iobase, int bank) -{ - outb(bank, iobase+BSR); -} - -#endif /* NSC_IRCC_H */ |