diff options
Diffstat (limited to 'drivers/net/irda/bfin_sir.c')
-rw-r--r-- | drivers/net/irda/bfin_sir.c | 817 |
1 files changed, 0 insertions, 817 deletions
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c deleted file mode 100644 index 3151b580dbd6..000000000000 --- a/drivers/net/irda/bfin_sir.c +++ /dev/null @@ -1,817 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2009 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ -#include "bfin_sir.h" - -#ifdef CONFIG_SIR_BFIN_DMA -#define DMA_SIR_RX_XCNT 10 -#define DMA_SIR_RX_YCNT (PAGE_SIZE / DMA_SIR_RX_XCNT) -#define DMA_SIR_RX_FLUSH_JIFS (HZ * 4 / 250) -#endif - -#if ANOMALY_05000447 -static int max_rate = 57600; -#else -static int max_rate = 115200; -#endif - -static void turnaround_delay(int mtt) -{ - long ticks; - - mtt = mtt < 10000 ? 10000 : mtt; - ticks = 1 + mtt / (USEC_PER_SEC / HZ); - schedule_timeout_uninterruptible(ticks); -} - -static void bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev) -{ - int i; - struct resource *res; - - for (i = 0; i < pdev->num_resources; i++) { - res = &pdev->resource[i]; - switch (res->flags) { - case IORESOURCE_MEM: - sp->membase = (void __iomem *)res->start; - break; - case IORESOURCE_IRQ: - sp->irq = res->start; - break; - case IORESOURCE_DMA: - sp->rx_dma_channel = res->start; - sp->tx_dma_channel = res->end; - break; - default: - break; - } - } - - sp->clk = get_sclk(); -#ifdef CONFIG_SIR_BFIN_DMA - sp->tx_done = 1; - init_timer(&(sp->rx_dma_timer)); -#endif -} - -static void bfin_sir_stop_tx(struct bfin_sir_port *port) -{ -#ifdef CONFIG_SIR_BFIN_DMA - disable_dma(port->tx_dma_channel); -#endif - - while (!(UART_GET_LSR(port) & THRE)) { - cpu_relax(); - continue; - } - - UART_CLEAR_IER(port, ETBEI); -} - -static void bfin_sir_enable_tx(struct bfin_sir_port *port) -{ - UART_SET_IER(port, ETBEI); -} - -static void bfin_sir_stop_rx(struct bfin_sir_port *port) -{ - UART_CLEAR_IER(port, ERBFI); -} - -static void bfin_sir_enable_rx(struct bfin_sir_port *port) -{ - UART_SET_IER(port, ERBFI); -} - -static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed) -{ - int ret = -EINVAL; - unsigned int quot; - unsigned short val, lsr, lcr; - static int utime; - int count = 10; - - lcr = WLS(8); - - switch (speed) { - case 9600: - case 19200: - case 38400: - case 57600: - case 115200: - - /* - * IRDA is not affected by anomaly 05000230, so there is no - * need to tweak the divisor like he UART driver (which will - * slightly speed up the baud rate on us). - */ - quot = (port->clk + (8 * speed)) / (16 * speed); - - do { - udelay(utime); - lsr = UART_GET_LSR(port); - } while (!(lsr & TEMT) && count--); - - /* The useconds for 1 bits to transmit */ - utime = 1000000 / speed + 1; - - /* Clear UCEN bit to reset the UART state machine - * and control registers - */ - val = UART_GET_GCTL(port); - val &= ~UCEN; - UART_PUT_GCTL(port, val); - - /* Set DLAB in LCR to Access THR RBR IER */ - UART_SET_DLAB(port); - SSYNC(); - - UART_PUT_DLL(port, quot & 0xFF); - UART_PUT_DLH(port, (quot >> 8) & 0xFF); - SSYNC(); - - /* Clear DLAB in LCR */ - UART_CLEAR_DLAB(port); - SSYNC(); - - UART_PUT_LCR(port, lcr); - - val = UART_GET_GCTL(port); - val |= UCEN; - UART_PUT_GCTL(port, val); - - ret = 0; - break; - default: - printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed); - break; - } - - val = UART_GET_GCTL(port); - /* If not add the 'RPOLC', we can't catch the receive interrupt. - * It's related with the HW layout and the IR transiver. - */ - val |= UMOD_IRDA | RPOLC; - UART_PUT_GCTL(port, val); - return ret; -} - -static int bfin_sir_is_receiving(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - - if (!(UART_GET_IER(port) & ERBFI)) - return 0; - return self->rx_buff.state != OUTSIDE_FRAME; -} - -#ifdef CONFIG_SIR_BFIN_PIO -static void bfin_sir_tx_chars(struct net_device *dev) -{ - unsigned int chr; - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - - if (self->tx_buff.len != 0) { - chr = *(self->tx_buff.data); - UART_PUT_CHAR(port, chr); - self->tx_buff.data++; - self->tx_buff.len--; - } else { - self->stats.tx_packets++; - self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head; - if (self->newspeed) { - bfin_sir_set_speed(port, self->newspeed); - self->speed = self->newspeed; - self->newspeed = 0; - } - bfin_sir_stop_tx(port); - bfin_sir_enable_rx(port); - /* I'm hungry! */ - netif_wake_queue(dev); - } -} - -static void bfin_sir_rx_chars(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - unsigned char ch; - - UART_CLEAR_LSR(port); - ch = UART_GET_CHAR(port); - async_unwrap_char(dev, &self->stats, &self->rx_buff, ch); -} - -static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - - spin_lock(&self->lock); - while ((UART_GET_LSR(port) & DR)) - bfin_sir_rx_chars(dev); - spin_unlock(&self->lock); - - return IRQ_HANDLED; -} - -static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - - spin_lock(&self->lock); - if (UART_GET_LSR(port) & THRE) - bfin_sir_tx_chars(dev); - spin_unlock(&self->lock); - - return IRQ_HANDLED; -} -#endif /* CONFIG_SIR_BFIN_PIO */ - -#ifdef CONFIG_SIR_BFIN_DMA -static void bfin_sir_dma_tx_chars(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - - if (!port->tx_done) - return; - port->tx_done = 0; - - if (self->tx_buff.len == 0) { - self->stats.tx_packets++; - if (self->newspeed) { - bfin_sir_set_speed(port, self->newspeed); - self->speed = self->newspeed; - self->newspeed = 0; - } - bfin_sir_enable_rx(port); - port->tx_done = 1; - netif_wake_queue(dev); - return; - } - - blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data), - (unsigned long)(self->tx_buff.data+self->tx_buff.len)); - set_dma_config(port->tx_dma_channel, - set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, - INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_start_addr(port->tx_dma_channel, - (unsigned long)(self->tx_buff.data)); - set_dma_x_count(port->tx_dma_channel, self->tx_buff.len); - set_dma_x_modify(port->tx_dma_channel, 1); - enable_dma(port->tx_dma_channel); -} - -static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - - spin_lock(&self->lock); - if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) { - clear_dma_irqstat(port->tx_dma_channel); - bfin_sir_stop_tx(port); - - self->stats.tx_packets++; - self->stats.tx_bytes += self->tx_buff.len; - self->tx_buff.len = 0; - if (self->newspeed) { - bfin_sir_set_speed(port, self->newspeed); - self->speed = self->newspeed; - self->newspeed = 0; - } - bfin_sir_enable_rx(port); - /* I'm hungry! */ - netif_wake_queue(dev); - port->tx_done = 1; - } - spin_unlock(&self->lock); - - return IRQ_HANDLED; -} - -static void bfin_sir_dma_rx_chars(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - int i; - - UART_CLEAR_LSR(port); - - for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++) - async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]); -} - -void bfin_sir_rx_dma_timeout(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - int x_pos, pos; - unsigned long flags; - - spin_lock_irqsave(&self->lock, flags); - x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel); - if (x_pos == DMA_SIR_RX_XCNT) - x_pos = 0; - - pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos; - - if (pos > port->rx_dma_buf.tail) { - port->rx_dma_buf.tail = pos; - bfin_sir_dma_rx_chars(dev); - port->rx_dma_buf.head = port->rx_dma_buf.tail; - } - spin_unlock_irqrestore(&self->lock, flags); -} - -static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - unsigned short irqstat; - - spin_lock(&self->lock); - - port->rx_dma_nrows++; - port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows; - bfin_sir_dma_rx_chars(dev); - if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) { - port->rx_dma_nrows = 0; - port->rx_dma_buf.tail = 0; - } - port->rx_dma_buf.head = port->rx_dma_buf.tail; - - irqstat = get_dma_curr_irqstat(port->rx_dma_channel); - clear_dma_irqstat(port->rx_dma_channel); - spin_unlock(&self->lock); - - mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS); - return IRQ_HANDLED; -} -#endif /* CONFIG_SIR_BFIN_DMA */ - -static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev) -{ -#ifdef CONFIG_SIR_BFIN_DMA - dma_addr_t dma_handle; -#endif /* CONFIG_SIR_BFIN_DMA */ - - if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) { - dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n"); - return -EBUSY; - } - - if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) { - dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n"); - free_dma(port->rx_dma_channel); - return -EBUSY; - } - -#ifdef CONFIG_SIR_BFIN_DMA - - set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev); - set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev); - - port->rx_dma_buf.buf = dma_alloc_coherent(NULL, PAGE_SIZE, - &dma_handle, GFP_DMA); - port->rx_dma_buf.head = 0; - port->rx_dma_buf.tail = 0; - port->rx_dma_nrows = 0; - - set_dma_config(port->rx_dma_channel, - set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, - INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8, DMA_SYNC_RESTART)); - set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT); - set_dma_x_modify(port->rx_dma_channel, 1); - set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT); - set_dma_y_modify(port->rx_dma_channel, 1); - set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf); - enable_dma(port->rx_dma_channel); - - port->rx_dma_timer.data = (unsigned long)(dev); - port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout; - -#else - - if (request_irq(port->irq, bfin_sir_rx_int, 0, "BFIN_SIR_RX", dev)) { - dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n"); - return -EBUSY; - } - - if (request_irq(port->irq+1, bfin_sir_tx_int, 0, "BFIN_SIR_TX", dev)) { - dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n"); - free_irq(port->irq, dev); - return -EBUSY; - } -#endif - - return 0; -} - -static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev) -{ - unsigned short val; - - bfin_sir_stop_rx(port); - - val = UART_GET_GCTL(port); - val &= ~(UCEN | UMOD_MASK | RPOLC); - UART_PUT_GCTL(port, val); - -#ifdef CONFIG_SIR_BFIN_DMA - disable_dma(port->tx_dma_channel); - disable_dma(port->rx_dma_channel); - del_timer(&(port->rx_dma_timer)); - dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0); -#else - free_irq(port->irq+1, dev); - free_irq(port->irq, dev); -#endif - free_dma(port->tx_dma_channel); - free_dma(port->rx_dma_channel); -} - -#ifdef CONFIG_PM -static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_sir_port *sir_port; - struct net_device *dev; - struct bfin_sir_self *self; - - sir_port = platform_get_drvdata(pdev); - if (!sir_port) - return 0; - - dev = sir_port->dev; - self = netdev_priv(dev); - if (self->open) { - flush_work(&self->work); - bfin_sir_shutdown(self->sir_port, dev); - netif_device_detach(dev); - } - - return 0; -} -static int bfin_sir_resume(struct platform_device *pdev) -{ - struct bfin_sir_port *sir_port; - struct net_device *dev; - struct bfin_sir_self *self; - struct bfin_sir_port *port; - - sir_port = platform_get_drvdata(pdev); - if (!sir_port) - return 0; - - dev = sir_port->dev; - self = netdev_priv(dev); - port = self->sir_port; - if (self->open) { - if (self->newspeed) { - self->speed = self->newspeed; - self->newspeed = 0; - } - bfin_sir_startup(port, dev); - bfin_sir_set_speed(port, 9600); - bfin_sir_enable_rx(port); - netif_device_attach(dev); - } - return 0; -} -#else -#define bfin_sir_suspend NULL -#define bfin_sir_resume NULL -#endif - -static void bfin_sir_send_work(struct work_struct *work) -{ - struct bfin_sir_self *self = container_of(work, struct bfin_sir_self, work); - struct net_device *dev = self->sir_port->dev; - struct bfin_sir_port *port = self->sir_port; - unsigned short val; - int tx_cnt = 10; - - while (bfin_sir_is_receiving(dev) && --tx_cnt) - turnaround_delay(self->mtt); - - bfin_sir_stop_rx(port); - - /* To avoid losting RX interrupt, we reset IR function before - * sending data. We also can set the speed, which will - * reset all the UART. - */ - val = UART_GET_GCTL(port); - val &= ~(UMOD_MASK | RPOLC); - UART_PUT_GCTL(port, val); - SSYNC(); - val |= UMOD_IRDA | RPOLC; - UART_PUT_GCTL(port, val); - SSYNC(); - /* bfin_sir_set_speed(port, self->speed); */ - -#ifdef CONFIG_SIR_BFIN_DMA - bfin_sir_dma_tx_chars(dev); -#endif - bfin_sir_enable_tx(port); - netif_trans_update(dev); -} - -static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - int speed = irda_get_next_speed(skb); - - netif_stop_queue(dev); - - self->mtt = irda_get_mtt(skb); - - if (speed != self->speed && speed != -1) - self->newspeed = speed; - - self->tx_buff.data = self->tx_buff.head; - if (skb->len == 0) - self->tx_buff.len = 0; - else - self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize); - - schedule_work(&self->work); - dev_kfree_skb(skb); - - return 0; -} - -static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) -{ - struct if_irda_req *rq = (struct if_irda_req *)ifreq; - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - int ret = 0; - - switch (cmd) { - case SIOCSBANDWIDTH: - if (capable(CAP_NET_ADMIN)) { - if (self->open) { - ret = bfin_sir_set_speed(port, rq->ifr_baudrate); - bfin_sir_enable_rx(port); - } else { - dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n"); - ret = 0; - } - } - break; - - case SIOCSMEDIABUSY: - ret = -EPERM; - if (capable(CAP_NET_ADMIN)) { - irda_device_set_media_busy(dev, TRUE); - ret = 0; - } - break; - - case SIOCGRECEIVING: - rq->ifr_receiving = bfin_sir_is_receiving(dev); - break; - - default: - ret = -EOPNOTSUPP; - break; - } - - return ret; -} - -static struct net_device_stats *bfin_sir_stats(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - - return &self->stats; -} - -static int bfin_sir_open(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - struct bfin_sir_port *port = self->sir_port; - int err; - - self->newspeed = 0; - self->speed = 9600; - - spin_lock_init(&self->lock); - - err = bfin_sir_startup(port, dev); - if (err) - goto err_startup; - - bfin_sir_set_speed(port, 9600); - - self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME); - if (!self->irlap) { - err = -ENOMEM; - goto err_irlap; - } - - INIT_WORK(&self->work, bfin_sir_send_work); - - /* - * Now enable the interrupt then start the queue - */ - self->open = 1; - bfin_sir_enable_rx(port); - - netif_start_queue(dev); - - return 0; - -err_irlap: - self->open = 0; - bfin_sir_shutdown(port, dev); -err_startup: - return err; -} - -static int bfin_sir_stop(struct net_device *dev) -{ - struct bfin_sir_self *self = netdev_priv(dev); - - flush_work(&self->work); - bfin_sir_shutdown(self->sir_port, dev); - - if (self->rxskb) { - dev_kfree_skb(self->rxskb); - self->rxskb = NULL; - } - - /* Stop IrLAP */ - if (self->irlap) { - irlap_close(self->irlap); - self->irlap = NULL; - } - - netif_stop_queue(dev); - self->open = 0; - - return 0; -} - -static int bfin_sir_init_iobuf(iobuff_t *io, int size) -{ - io->head = kmalloc(size, GFP_KERNEL); - if (!io->head) - return -ENOMEM; - io->truesize = size; - io->in_frame = FALSE; - io->state = OUTSIDE_FRAME; - io->data = io->head; - return 0; -} - -static const struct net_device_ops bfin_sir_ndo = { - .ndo_open = bfin_sir_open, - .ndo_stop = bfin_sir_stop, - .ndo_start_xmit = bfin_sir_hard_xmit, - .ndo_do_ioctl = bfin_sir_ioctl, - .ndo_get_stats = bfin_sir_stats, -}; - -static int bfin_sir_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct bfin_sir_self *self; - unsigned int baudrate_mask; - struct bfin_sir_port *sir_port; - int err; - - if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \ - per[pdev->id][3] == pdev->id) { - err = peripheral_request_list(per[pdev->id], DRIVER_NAME); - if (err) - return err; - } else { - dev_err(&pdev->dev, "Invalid pdev id, please check board file\n"); - return -ENODEV; - } - - err = -ENOMEM; - sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL); - if (!sir_port) - goto err_mem_0; - - bfin_sir_init_ports(sir_port, pdev); - - dev = alloc_irdadev(sizeof(*self)); - if (!dev) - goto err_mem_1; - - self = netdev_priv(dev); - self->dev = &pdev->dev; - self->sir_port = sir_port; - sir_port->dev = dev; - - err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU); - if (err) - goto err_mem_2; - err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME); - if (err) - goto err_mem_3; - - dev->netdev_ops = &bfin_sir_ndo; - dev->irq = sir_port->irq; - - irda_init_max_qos_capabilies(&self->qos); - - baudrate_mask = IR_9600; - - switch (max_rate) { - case 115200: - baudrate_mask |= IR_115200; - case 57600: - baudrate_mask |= IR_57600; - case 38400: - baudrate_mask |= IR_38400; - case 19200: - baudrate_mask |= IR_19200; - case 9600: - break; - default: - dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n"); - } - - self->qos.baud_rate.bits &= baudrate_mask; - - self->qos.min_turn_time.bits = 1; /* 10 ms or more */ - - irda_qos_bits_to_value(&self->qos); - - err = register_netdev(dev); - - if (err) { - kfree(self->tx_buff.head); -err_mem_3: - kfree(self->rx_buff.head); -err_mem_2: - free_netdev(dev); -err_mem_1: - kfree(sir_port); -err_mem_0: - peripheral_free_list(per[pdev->id]); - } else - platform_set_drvdata(pdev, sir_port); - - return err; -} - -static int bfin_sir_remove(struct platform_device *pdev) -{ - struct bfin_sir_port *sir_port; - struct net_device *dev = NULL; - struct bfin_sir_self *self; - - sir_port = platform_get_drvdata(pdev); - if (!sir_port) - return 0; - dev = sir_port->dev; - self = netdev_priv(dev); - unregister_netdev(dev); - kfree(self->tx_buff.head); - kfree(self->rx_buff.head); - free_netdev(dev); - kfree(sir_port); - - return 0; -} - -static struct platform_driver bfin_ir_driver = { - .probe = bfin_sir_probe, - .remove = bfin_sir_remove, - .suspend = bfin_sir_suspend, - .resume = bfin_sir_resume, - .driver = { - .name = DRIVER_NAME, - }, -}; - -module_platform_driver(bfin_ir_driver); - -module_param(max_rate, int, 0); -MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)"); - -MODULE_AUTHOR("Graf Yang <graf.yang@analog.com>"); -MODULE_DESCRIPTION("Blackfin IrDA driver"); -MODULE_LICENSE("GPL"); |