4 files changed, 439 insertions, 165 deletions

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 08ae4655423a..3e89beab64fd 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -15,9 +15,9 @@ config IEEE802154_FAKEHARD
 	depends on  IEEE802154_DRIVERS
 	---help---
 	  Say Y here to enable the fake driver that serves as an example
-          of HardMAC device driver.
+	  of HardMAC device driver.
 
-          This driver can also be built as a module. To do so say M here.
+	  This driver can also be built as a module. To do so say M here.
 	  The module will be called 'fakehard'.
 
 config IEEE802154_FAKELB
@@ -31,17 +31,23 @@ config IEEE802154_FAKELB
 	  The module will be called 'fakelb'.
 
 config IEEE802154_AT86RF230
-        depends on IEEE802154_DRIVERS && MAC802154
-        tristate "AT86RF230/231 transceiver driver"
-        depends on SPI
+	depends on IEEE802154_DRIVERS && MAC802154
+	tristate "AT86RF230/231/233/212 transceiver driver"
+	depends on SPI
+	---help---
+	  Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'at86rf230'.
 
 config IEEE802154_MRF24J40
-       tristate "Microchip MRF24J40 transceiver driver"
-       depends on IEEE802154_DRIVERS && MAC802154
-       depends on SPI
-       ---help---
-         Say Y here to enable the MRF24J20 SPI 802.15.4 wireless
-         controller.
-
-         This driver can also be built as a module. To do so, say M here.
-         the module will be called 'mrf24j40'.
+	tristate "Microchip MRF24J40 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	---help---
+	  Say Y here to enable the MRF24J20 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'mrf24j40'.
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index ab31544bc254..89417ac41083 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -31,13 +31,13 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at86rf230.h>
 #include <linux/skbuff.h>
+#include <linux/of_gpio.h>
 
 #include <net/mac802154.h>
 #include <net/wpan-phy.h>
 
 struct at86rf230_local {
 	struct spi_device *spi;
-	int rstn, slp_tr, dig2;
 
 	u8 part;
 	u8 vers;
@@ -53,8 +53,16 @@ struct at86rf230_local {
 	spinlock_t lock;
 	bool irq_busy;
 	bool is_tx;
+	bool tx_aret;
+
+	int rssi_base_val;
 };
 
+static bool is_rf212(struct at86rf230_local *local)
+{
+	return local->part == 7;
+}
+
 #define	RG_TRX_STATUS	(0x01)
 #define	SR_TRX_STATUS		0x01, 0x1f, 0
 #define	SR_RESERVED_01_3	0x01, 0x20, 5
@@ -100,7 +108,10 @@ struct at86rf230_local {
 #define	SR_SFD_VALUE		0x0b, 0xff, 0
 #define	RG_TRX_CTRL_2	(0x0c)
 #define	SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
-#define	SR_RESERVED_0c_2	0x0c, 0x7c, 2
+#define	SR_SUB_MODE		0x0c, 0x04, 2
+#define	SR_BPSK_QPSK		0x0c, 0x08, 3
+#define	SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
+#define	SR_RESERVED_0c_5	0x0c, 0x60, 5
 #define	SR_RX_SAFE_MODE		0x0c, 0x80, 7
 #define	RG_ANT_DIV	(0x0d)
 #define	SR_ANT_CTRL		0x0d, 0x03, 0
@@ -145,7 +156,7 @@ struct at86rf230_local {
 #define	SR_RESERVED_17_5	0x17, 0x08, 3
 #define	SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
 #define	SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
-#define	SR_RESERVED_17_2	0x17, 0x40, 6
+#define	SR_CSMA_LBT_MODE	0x17, 0x40, 6
 #define	SR_RESERVED_17_1	0x17, 0x80, 7
 #define	RG_FTN_CTRL	(0x18)
 #define	SR_RESERVED_18_2	0x18, 0x7f, 0
@@ -234,6 +245,7 @@ struct at86rf230_local {
 #define STATE_TX_ON		0x09
 /* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
 #define STATE_SLEEP		0x0F
+#define STATE_PREP_DEEP_SLEEP	0x10
 #define STATE_BUSY_RX_AACK	0x11
 #define STATE_BUSY_TX_ARET	0x12
 #define STATE_RX_AACK_ON	0x16
@@ -244,6 +256,57 @@ struct at86rf230_local {
 #define STATE_TRANSITION_IN_PROGRESS 0x1F
 
 static int
+__at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part,
+		u8 *version)
+{
+	u8 data[4];
+	u8 *buf = kmalloc(2, GFP_KERNEL);
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len	= 2,
+		.tx_buf	= buf,
+		.rx_buf	= buf,
+	};
+	u8 reg;
+
+	if (!buf)
+		return -ENOMEM;
+
+	for (reg = RG_PART_NUM; reg <= RG_MAN_ID_1; reg++) {
+		buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
+		buf[1] = 0xff;
+		dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
+		spi_message_init(&msg);
+		spi_message_add_tail(&xfer, &msg);
+
+		status = spi_sync(spi, &msg);
+		dev_vdbg(&spi->dev, "status = %d\n", status);
+		if (msg.status)
+			status = msg.status;
+
+		dev_vdbg(&spi->dev, "status = %d\n", status);
+		dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
+		dev_vdbg(&spi->dev, "buf[1] = %02x\n", buf[1]);
+
+		if (status == 0)
+			data[reg - RG_PART_NUM] = buf[1];
+		else
+			break;
+	}
+
+	if (status == 0) {
+		*part = data[0];
+		*version = data[1];
+		*man_id = (data[3] << 8) | data[2];
+	}
+
+	kfree(buf);
+
+	return status;
+}
+
+static int
 __at86rf230_write(struct at86rf230_local *lp, u8 addr, u8 data)
 {
 	u8 *buf = lp->buf;
@@ -489,7 +552,9 @@ at86rf230_state(struct ieee802154_dev *dev, int state)
 	} while (val == STATE_TRANSITION_IN_PROGRESS);
 
 
-	if (val == desired_status)
+	if (val == desired_status ||
+	    (desired_status == STATE_RX_ON && val == STATE_BUSY_RX) ||
+	    (desired_status == STATE_RX_AACK_ON && val == STATE_BUSY_RX_AACK))
 		return 0;
 
 	pr_err("unexpected state change: %d, asked for %d\n", val, state);
@@ -510,7 +575,11 @@ at86rf230_start(struct ieee802154_dev *dev)
 	if (rc)
 		return rc;
 
-	return at86rf230_state(dev, STATE_RX_ON);
+	rc = at86rf230_state(dev, STATE_TX_ON);
+	if (rc)
+		return rc;
+
+	return at86rf230_state(dev, STATE_RX_AACK_ON);
 }
 
 static void
@@ -520,6 +589,39 @@ at86rf230_stop(struct ieee802154_dev *dev)
 }
 
 static int
+at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel)
+{
+	lp->rssi_base_val = -91;
+
+	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
+at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
+{
+	int rc;
+
+	if (channel == 0)
+		rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0);
+	else
+		rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1);
+	if (rc < 0)
+		return rc;
+
+	if (page == 0) {
+		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
+		lp->rssi_base_val = -100;
+	} else {
+		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
+		lp->rssi_base_val = -98;
+	}
+	if (rc < 0)
+		return rc;
+
+	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
 at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
 {
 	struct at86rf230_local *lp = dev->priv;
@@ -527,14 +629,22 @@ at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
 
 	might_sleep();
 
-	if (page != 0 || channel < 11 || channel > 26) {
+	if (page < 0 || page > 31 ||
+	    !(lp->dev->phy->channels_supported[page] & BIT(channel))) {
 		WARN_ON(1);
 		return -EINVAL;
 	}
 
-	rc = at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+	if (is_rf212(lp))
+		rc = at86rf212_set_channel(lp, page, channel);
+	else
+		rc = at86rf230_set_channel(lp, page, channel);
+	if (rc < 0)
+		return rc;
+
 	msleep(1); /* Wait for PLL */
 	dev->phy->current_channel = channel;
+	dev->phy->current_page = page;
 
 	return 0;
 }
@@ -546,12 +656,12 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
 	int rc;
 	unsigned long flags;
 
-	spin_lock(&lp->lock);
+	spin_lock_irqsave(&lp->lock, flags);
 	if  (lp->irq_busy) {
-		spin_unlock(&lp->lock);
+		spin_unlock_irqrestore(&lp->lock, flags);
 		return -EBUSY;
 	}
-	spin_unlock(&lp->lock);
+	spin_unlock_irqrestore(&lp->lock, flags);
 
 	might_sleep();
 
@@ -568,6 +678,12 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
 	if (rc)
 		goto err_rx;
 
+	if (lp->tx_aret) {
+		rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ARET_ON);
+		if (rc)
+			goto err_rx;
+	}
+
 	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_BUSY_TX);
 	if (rc)
 		goto err_rx;
@@ -630,30 +746,31 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev,
 	struct at86rf230_local *lp = dev->priv;
 
 	if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
 		dev_vdbg(&lp->spi->dev,
 			"at86rf230_set_hw_addr_filt called for saddr\n");
-		__at86rf230_write(lp, RG_SHORT_ADDR_0, filt->short_addr);
-		__at86rf230_write(lp, RG_SHORT_ADDR_1, filt->short_addr >> 8);
+		__at86rf230_write(lp, RG_SHORT_ADDR_0, addr);
+		__at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8);
 	}
 
 	if (changed & IEEE802515_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
 		dev_vdbg(&lp->spi->dev,
 			"at86rf230_set_hw_addr_filt called for pan id\n");
-		__at86rf230_write(lp, RG_PAN_ID_0, filt->pan_id);
-		__at86rf230_write(lp, RG_PAN_ID_1, filt->pan_id >> 8);
+		__at86rf230_write(lp, RG_PAN_ID_0, pan);
+		__at86rf230_write(lp, RG_PAN_ID_1, pan >> 8);
 	}
 
 	if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
 		dev_vdbg(&lp->spi->dev,
 			"at86rf230_set_hw_addr_filt called for IEEE addr\n");
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_0, filt->ieee_addr[7]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_1, filt->ieee_addr[6]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_2, filt->ieee_addr[5]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_3, filt->ieee_addr[4]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_4, filt->ieee_addr[3]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_5, filt->ieee_addr[2]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_6, filt->ieee_addr[1]);
-		at86rf230_write_subreg(lp, SR_IEEE_ADDR_7, filt->ieee_addr[0]);
+		for (i = 0; i < 8; i++)
+			__at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]);
 	}
 
 	if (changed & IEEE802515_AFILT_PANC_CHANGED) {
@@ -668,6 +785,93 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev,
 	return 0;
 }
 
+static int
+at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	/* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five
+	 * bits decrease power in 1dB steps. 0x60 represents extra PA gain of
+	 * 0dB.
+	 * thus, supported values for db range from -26 to 5, for 31dB of
+	 * reduction to 0dB of reduction.
+	 */
+	if (db > 5 || db < -26)
+		return -EINVAL;
+
+	db = -(db - 5);
+
+	return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
+}
+
+static int
+at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
+}
+
+static int
+at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
+}
+
+static int
+at86rf212_set_cca_ed_level(struct ieee802154_dev *dev, s32 level)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int desens_steps;
+
+	if (level < lp->rssi_base_val || level > 30)
+		return -EINVAL;
+
+	desens_steps = (level - lp->rssi_base_val) * 100 / 207;
+
+	return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
+}
+
+static int
+at86rf212_set_csma_params(struct ieee802154_dev *dev, u8 min_be, u8 max_be,
+			  u8 retries)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc;
+
+	if (min_be > max_be || max_be > 8 || retries > 5)
+		return -EINVAL;
+
+	rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
+	if (rc)
+		return rc;
+
+	rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
+	if (rc)
+		return rc;
+
+	return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, max_be);
+}
+
+static int
+at86rf212_set_frame_retries(struct ieee802154_dev *dev, s8 retries)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc = 0;
+
+	if (retries < -1 || retries > 15)
+		return -EINVAL;
+
+	lp->tx_aret = retries >= 0;
+
+	if (retries >= 0)
+		rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
+
+	return rc;
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -678,6 +882,22 @@ static struct ieee802154_ops at86rf230_ops = {
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
 };
 
+static struct ieee802154_ops at86rf212_ops = {
+	.owner = THIS_MODULE,
+	.xmit = at86rf230_xmit,
+	.ed = at86rf230_ed,
+	.set_channel = at86rf230_channel,
+	.start = at86rf230_start,
+	.stop = at86rf230_stop,
+	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
+	.set_txpower = at86rf212_set_txpower,
+	.set_lbt = at86rf212_set_lbt,
+	.set_cca_mode = at86rf212_set_cca_mode,
+	.set_cca_ed_level = at86rf212_set_cca_ed_level,
+	.set_csma_params = at86rf212_set_csma_params,
+	.set_frame_retries = at86rf212_set_frame_retries,
+};
+
 static void at86rf230_irqwork(struct work_struct *work)
 {
 	struct at86rf230_local *lp =
@@ -695,8 +915,8 @@ static void at86rf230_irqwork(struct work_struct *work)
 	status &= ~IRQ_TRX_UR; /* FIXME: possibly handle ???*/
 
 	if (status & IRQ_TRX_END) {
-		spin_lock_irqsave(&lp->lock, flags);
 		status &= ~IRQ_TRX_END;
+		spin_lock_irqsave(&lp->lock, flags);
 		if (lp->is_tx) {
 			lp->is_tx = 0;
 			spin_unlock_irqrestore(&lp->lock, flags);
@@ -725,10 +945,11 @@ static void at86rf230_irqwork_level(struct work_struct *work)
 static irqreturn_t at86rf230_isr(int irq, void *data)
 {
 	struct at86rf230_local *lp = data;
+	unsigned long flags;
 
-	spin_lock(&lp->lock);
+	spin_lock_irqsave(&lp->lock, flags);
 	lp->irq_busy = 1;
-	spin_unlock(&lp->lock);
+	spin_unlock_irqrestore(&lp->lock, flags);
 
 	schedule_work(&lp->irqwork);
 
@@ -752,22 +973,15 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data;
 	int rc, irq_pol;
 	u8 status;
+	u8 csma_seed[2];
 
 	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
 	if (rc)
 		return rc;
 
-	dev_info(&lp->spi->dev, "Status: %02x\n", status);
-	if (status == STATE_P_ON) {
-		rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TRX_OFF);
-		if (rc)
-			return rc;
-		msleep(1);
-		rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
-		if (rc)
-			return rc;
-		dev_info(&lp->spi->dev, "Status: %02x\n", status);
-	}
+	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_FORCE_TRX_OFF);
+	if (rc)
+		return rc;
 
 	/* configure irq polarity, defaults to high active */
 	if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
@@ -783,6 +997,14 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	if (rc)
 		return rc;
 
+	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+	if (rc)
+		return rc;
+	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+	if (rc)
+		return rc;
+
 	/* CLKM changes are applied immediately */
 	rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
 	if (rc)
@@ -795,16 +1017,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	/* Wait the next SLEEP cycle */
 	msleep(100);
 
-	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ON);
-	if (rc)
-		return rc;
-	msleep(1);
-
-	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
-	if (rc)
-		return rc;
-	dev_info(&lp->spi->dev, "Status: %02x\n", status);
-
 	rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &status);
 	if (rc)
 		return rc;
@@ -824,14 +1036,38 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	return 0;
 }
 
-static void at86rf230_fill_data(struct spi_device *spi)
+static struct at86rf230_platform_data *
+at86rf230_get_pdata(struct spi_device *spi)
 {
-	struct at86rf230_local *lp = spi_get_drvdata(spi);
-	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
+	struct at86rf230_platform_data *pdata;
+	const char *irq_type;
+
+	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node)
+		return spi->dev.platform_data;
+
+	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto done;
+
+	pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
+	pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+
+	pdata->irq_type = IRQF_TRIGGER_RISING;
+	of_property_read_string(spi->dev.of_node, "irq-type", &irq_type);
+	if (!strcmp(irq_type, "level-high"))
+		pdata->irq_type = IRQF_TRIGGER_HIGH;
+	else if (!strcmp(irq_type, "level-low"))
+		pdata->irq_type = IRQF_TRIGGER_LOW;
+	else if (!strcmp(irq_type, "edge-rising"))
+		pdata->irq_type = IRQF_TRIGGER_RISING;
+	else if (!strcmp(irq_type, "edge-falling"))
+		pdata->irq_type = IRQF_TRIGGER_FALLING;
+	else
+		dev_warn(&spi->dev, "wrong irq-type specified using edge-rising\n");
 
-	lp->rstn = pdata->rstn;
-	lp->slp_tr = pdata->slp_tr;
-	lp->dig2 = pdata->dig2;
+	spi->dev.platform_data = pdata;
+done:
+	return pdata;
 }
 
 static int at86rf230_probe(struct spi_device *spi)
@@ -839,133 +1075,146 @@ static int at86rf230_probe(struct spi_device *spi)
 	struct at86rf230_platform_data *pdata;
 	struct ieee802154_dev *dev;
 	struct at86rf230_local *lp;
-	u8 man_id_0, man_id_1, status;
+	u16 man_id = 0;
+	u8 part = 0, version = 0, status;
 	irq_handler_t irq_handler;
 	work_func_t irq_worker;
-	int rc, supported = 0;
+	int rc;
 	const char *chip;
+	struct ieee802154_ops *ops = NULL;
 
 	if (!spi->irq) {
 		dev_err(&spi->dev, "no IRQ specified\n");
 		return -EINVAL;
 	}
 
-	pdata = spi->dev.platform_data;
+	pdata = at86rf230_get_pdata(spi);
 	if (!pdata) {
 		dev_err(&spi->dev, "no platform_data\n");
 		return -EINVAL;
 	}
 
-	dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops);
-	if (!dev)
-		return -ENOMEM;
-
-	lp = dev->priv;
-	lp->dev = dev;
-
-	lp->spi = spi;
-
-	dev->parent = &spi->dev;
-	dev->extra_tx_headroom = 0;
-	/* We do support only 2.4 Ghz */
-	dev->phy->channels_supported[0] = 0x7FFF800;
-	dev->flags = IEEE802154_HW_OMIT_CKSUM;
-
-	if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		irq_worker = at86rf230_irqwork;
-		irq_handler = at86rf230_isr;
-	} else {
-		irq_worker = at86rf230_irqwork_level;
-		irq_handler = at86rf230_isr_level;
+	if (gpio_is_valid(pdata->rstn)) {
+		rc = gpio_request(pdata->rstn, "rstn");
+		if (rc)
+			return rc;
 	}
 
-	mutex_init(&lp->bmux);
-	INIT_WORK(&lp->irqwork, irq_worker);
-	spin_lock_init(&lp->lock);
-	init_completion(&lp->tx_complete);
-
-	spi_set_drvdata(spi, lp);
-
-	at86rf230_fill_data(spi);
-
-	rc = gpio_request(lp->rstn, "rstn");
-	if (rc)
-		goto err_rstn;
-
-	if (gpio_is_valid(lp->slp_tr)) {
-		rc = gpio_request(lp->slp_tr, "slp_tr");
+	if (gpio_is_valid(pdata->slp_tr)) {
+		rc = gpio_request(pdata->slp_tr, "slp_tr");
 		if (rc)
 			goto err_slp_tr;
 	}
 
-	rc = gpio_direction_output(lp->rstn, 1);
-	if (rc)
-		goto err_gpio_dir;
+	if (gpio_is_valid(pdata->rstn)) {
+		rc = gpio_direction_output(pdata->rstn, 1);
+		if (rc)
+			goto err_gpio_dir;
+	}
 
-	if (gpio_is_valid(lp->slp_tr)) {
-		rc = gpio_direction_output(lp->slp_tr, 0);
+	if (gpio_is_valid(pdata->slp_tr)) {
+		rc = gpio_direction_output(pdata->slp_tr, 0);
 		if (rc)
 			goto err_gpio_dir;
 	}
 
 	/* Reset */
-	msleep(1);
-	gpio_set_value(lp->rstn, 0);
-	msleep(1);
-	gpio_set_value(lp->rstn, 1);
-	msleep(1);
+	if (gpio_is_valid(pdata->rstn)) {
+		udelay(1);
+		gpio_set_value(pdata->rstn, 0);
+		udelay(1);
+		gpio_set_value(pdata->rstn, 1);
+		usleep_range(120, 240);
+	}
 
-	rc = at86rf230_read_subreg(lp, SR_MAN_ID_0, &man_id_0);
-	if (rc)
-		goto err_gpio_dir;
-	rc = at86rf230_read_subreg(lp, SR_MAN_ID_1, &man_id_1);
-	if (rc)
+	rc = __at86rf230_detect_device(spi, &man_id, &part, &version);
+	if (rc < 0)
 		goto err_gpio_dir;
 
-	if (man_id_1 != 0x00 || man_id_0 != 0x1f) {
+	if (man_id != 0x001f) {
 		dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
-			man_id_1, man_id_0);
+			man_id >> 8, man_id & 0xFF);
 		rc = -EINVAL;
 		goto err_gpio_dir;
 	}
 
-	rc = at86rf230_read_subreg(lp, SR_PART_NUM, &lp->part);
-	if (rc)
-		goto err_gpio_dir;
-
-	rc = at86rf230_read_subreg(lp, SR_VERSION_NUM, &lp->vers);
-	if (rc)
-		goto err_gpio_dir;
-
-	switch (lp->part) {
+	switch (part) {
 	case 2:
 		chip = "at86rf230";
-		/* supported = 1;  FIXME: should be easy to support; */
+		/* FIXME: should be easy to support; */
 		break;
 	case 3:
 		chip = "at86rf231";
-		supported = 1;
+		ops = &at86rf230_ops;
+		break;
+	case 7:
+		chip = "at86rf212";
+		if (version == 1)
+			ops = &at86rf212_ops;
+		break;
+	case 11:
+		chip = "at86rf233";
+		ops = &at86rf230_ops;
 		break;
 	default:
 		chip = "UNKNOWN";
 		break;
 	}
 
-	dev_info(&spi->dev, "Detected %s chip version %d\n", chip, lp->vers);
-	if (!supported) {
+	dev_info(&spi->dev, "Detected %s chip version %d\n", chip, version);
+	if (!ops) {
 		rc = -ENOTSUPP;
 		goto err_gpio_dir;
 	}
 
+	dev = ieee802154_alloc_device(sizeof(*lp), ops);
+	if (!dev) {
+		rc = -ENOMEM;
+		goto err_gpio_dir;
+	}
+
+	lp = dev->priv;
+	lp->dev = dev;
+	lp->part = part;
+	lp->vers = version;
+
+	lp->spi = spi;
+
+	dev->parent = &spi->dev;
+	dev->extra_tx_headroom = 0;
+	dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK;
+
+	if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		irq_worker = at86rf230_irqwork;
+		irq_handler = at86rf230_isr;
+	} else {
+		irq_worker = at86rf230_irqwork_level;
+		irq_handler = at86rf230_isr_level;
+	}
+
+	mutex_init(&lp->bmux);
+	INIT_WORK(&lp->irqwork, irq_worker);
+	spin_lock_init(&lp->lock);
+	init_completion(&lp->tx_complete);
+
+	spi_set_drvdata(spi, lp);
+
+	if (is_rf212(lp)) {
+		dev->phy->channels_supported[0] = 0x00007FF;
+		dev->phy->channels_supported[2] = 0x00007FF;
+	} else {
+		dev->phy->channels_supported[0] = 0x7FFF800;
+	}
+
 	rc = at86rf230_hw_init(lp);
 	if (rc)
-		goto err_gpio_dir;
+		goto err_hw_init;
 
 	rc = request_irq(spi->irq, irq_handler,
 			 IRQF_SHARED | pdata->irq_type,
 			 dev_name(&spi->dev), lp);
 	if (rc)
-		goto err_gpio_dir;
+		goto err_hw_init;
 
 	/* Read irq status register to reset irq line */
 	rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
@@ -980,30 +1229,37 @@ static int at86rf230_probe(struct spi_device *spi)
 
 err_irq:
 	free_irq(spi->irq, lp);
+err_hw_init:
 	flush_work(&lp->irqwork);
-err_gpio_dir:
-	if (gpio_is_valid(lp->slp_tr))
-		gpio_free(lp->slp_tr);
-err_slp_tr:
-	gpio_free(lp->rstn);
-err_rstn:
+	spi_set_drvdata(spi, NULL);
 	mutex_destroy(&lp->bmux);
 	ieee802154_free_device(lp->dev);
+
+err_gpio_dir:
+	if (gpio_is_valid(pdata->slp_tr))
+		gpio_free(pdata->slp_tr);
+err_slp_tr:
+	if (gpio_is_valid(pdata->rstn))
+		gpio_free(pdata->rstn);
 	return rc;
 }
 
 static int at86rf230_remove(struct spi_device *spi)
 {
 	struct at86rf230_local *lp = spi_get_drvdata(spi);
+	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
 
+	/* mask all at86rf230 irq's */
+	at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
 	ieee802154_unregister_device(lp->dev);
 
 	free_irq(spi->irq, lp);
 	flush_work(&lp->irqwork);
 
-	if (gpio_is_valid(lp->slp_tr))
-		gpio_free(lp->slp_tr);
-	gpio_free(lp->rstn);
+	if (gpio_is_valid(pdata->slp_tr))
+		gpio_free(pdata->slp_tr);
+	if (gpio_is_valid(pdata->rstn))
+		gpio_free(pdata->rstn);
 
 	mutex_destroy(&lp->bmux);
 	ieee802154_free_device(lp->dev);
@@ -1012,8 +1268,19 @@ static int at86rf230_remove(struct spi_device *spi)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_OF)
+static struct of_device_id at86rf230_of_match[] = {
+	{ .compatible = "atmel,at86rf230", },
+	{ .compatible = "atmel,at86rf231", },
+	{ .compatible = "atmel,at86rf233", },
+	{ .compatible = "atmel,at86rf212", },
+	{ },
+};
+#endif
+
 static struct spi_driver at86rf230_driver = {
 	.driver = {
+		.of_match_table = of_match_ptr(at86rf230_of_match),
 		.name	= "at86rf230",
 		.owner	= THIS_MODULE,
 	},
diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c
index bf0d55e2dd63..78f18be3bbf2 100644
--- a/drivers/net/ieee802154/fakehard.c
+++ b/drivers/net/ieee802154/fakehard.c
@@ -63,11 +63,11 @@ static struct wpan_phy *fake_get_phy(const struct net_device *dev)
  *
  * Return the ID of the PAN from the PIB.
  */
-static u16 fake_get_pan_id(const struct net_device *dev)
+static __le16 fake_get_pan_id(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
-	return 0xeba1;
+	return cpu_to_le16(0xeba1);
 }
 
 /**
@@ -78,11 +78,11 @@ static u16 fake_get_pan_id(const struct net_device *dev)
  * device. If the device has not yet had a short address assigned
  * then this should return 0xFFFF to indicate a lack of association.
  */
-static u16 fake_get_short_addr(const struct net_device *dev)
+static __le16 fake_get_short_addr(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
-	return 0x1;
+	return cpu_to_le16(0x1);
 }
 
 /**
@@ -149,7 +149,7 @@ static int fake_assoc_req(struct net_device *dev,
  *       802.15.4-2006 document.
  */
 static int fake_assoc_resp(struct net_device *dev,
-		struct ieee802154_addr *addr, u16 short_addr, u8 status)
+		struct ieee802154_addr *addr, __le16 short_addr, u8 status)
 {
 	return 0;
 }
@@ -191,10 +191,10 @@ static int fake_disassoc_req(struct net_device *dev,
  * Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006
  * document, with 7.3.8 describing coordinator realignment.
  */
-static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
-				u8 channel, u8 page,
-				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
-				u8 coord_realign)
+static int fake_start_req(struct net_device *dev,
+			  struct ieee802154_addr *addr, u8 channel, u8 page,
+			  u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
+			  u8 coord_realign)
 {
 	struct wpan_phy *phy = fake_to_phy(dev);
 
@@ -281,8 +281,8 @@ static int ieee802154_fake_ioctl(struct net_device *dev, struct ifreq *ifr,
 	switch (cmd) {
 	case SIOCGIFADDR:
 		/* FIXME: fixed here, get from device IRL */
-		pan_id = fake_get_pan_id(dev);
-		short_addr = fake_get_short_addr(dev);
+		pan_id = le16_to_cpu(fake_get_pan_id(dev));
+		short_addr = le16_to_cpu(fake_get_short_addr(dev));
 		if (pan_id == IEEE802154_PANID_BROADCAST ||
 		    short_addr == IEEE802154_ADDR_BROADCAST)
 			return -EADDRNOTAVAIL;
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 246befa4ba05..78a6552ed707 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -465,8 +465,8 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
 	if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
 		/* Short Addr */
 		u8 addrh, addrl;
-		addrh = filt->short_addr >> 8 & 0xff;
-		addrl = filt->short_addr & 0xff;
+		addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
+		addrl = le16_to_cpu(filt->short_addr) & 0xff;
 
 		write_short_reg(devrec, REG_SADRH, addrh);
 		write_short_reg(devrec, REG_SADRL, addrl);
@@ -476,15 +476,16 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
 
 	if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
 		/* Device Address */
-		int i;
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
 		for (i = 0; i < 8; i++)
-			write_short_reg(devrec, REG_EADR0+i,
-					filt->ieee_addr[7-i]);
+			write_short_reg(devrec, REG_EADR0 + i, addr[i]);
 
 #ifdef DEBUG
 		printk(KERN_DEBUG "Set long addr to: ");
 		for (i = 0; i < 8; i++)
-			printk("%02hhx ", filt->ieee_addr[i]);
+			printk("%02hhx ", addr[7 - i]);
 		printk(KERN_DEBUG "\n");
 #endif
 	}
@@ -492,8 +493,8 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
 	if (changed & IEEE802515_AFILT_PANID_CHANGED) {
 		/* PAN ID */
 		u8 panidl, panidh;
-		panidh = filt->pan_id >> 8 & 0xff;
-		panidl = filt->pan_id & 0xff;
+		panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
+		panidl = le16_to_cpu(filt->pan_id) & 0xff;
 		write_short_reg(devrec, REG_PANIDH, panidh);
 		write_short_reg(devrec, REG_PANIDL, panidl);