diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/common.h | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 1007 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 26 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 26 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 16 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 91 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 203 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 10 |
15 files changed, 1251 insertions, 170 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index cfbe3634dfa1..85c0e41f8021 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -145,6 +145,17 @@ config DWMAC_SUNXI This selects Allwinner SoC glue layer support for the stmmac device driver. This driver is used for A20/A31 GMAC ethernet controller. + +config DWMAC_SUN8I + tristate "Allwinner sun8i GMAC support" + default ARCH_SUNXI + depends on OF && (ARCH_SUNXI || COMPILE_TEST) + ---help--- + Support for Allwinner H3 A83T A64 EMAC ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for H3/A83T/A64 + EMAC ethernet controller. endif config STMMAC_PCI diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index 700c60336674..fd4937a7fcab 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o +obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o stmmac-platform-objs:= stmmac_platform.o diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index b7ce3fbb5375..e82b4b70b7be 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -549,9 +549,11 @@ extern const struct stmmac_hwtimestamp stmmac_ptp; extern const struct stmmac_mode_ops dwmac4_ring_mode_ops; struct mac_link { - int port; - int duplex; - int speed; + u32 speed_mask; + u32 speed10; + u32 speed100; + u32 speed1000; + u32 duplex; }; struct mii_regs { diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c new file mode 100644 index 000000000000..fffd6d5fc907 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -0,0 +1,1007 @@ +/* + * dwmac-sun8i.c - Allwinner sun8i DWMAC specific glue layer + * + * Copyright (C) 2017 Corentin Labbe <clabbe.montjoie@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regmap.h> +#include <linux/stmmac.h> + +#include "stmmac.h" +#include "stmmac_platform.h" + +/* General notes on dwmac-sun8i: + * Locking: no locking is necessary in this file because all necessary locking + * is done in the "stmmac files" + */ + +/* struct emac_variant - Descrive dwmac-sun8i hardware variant + * @default_syscon_value: The default value of the EMAC register in syscon + * This value is used for disabling properly EMAC + * and used as a good starting value in case of the + * boot process(uboot) leave some stuff. + * @internal_phy: Does the MAC embed an internal PHY + * @support_mii: Does the MAC handle MII + * @support_rmii: Does the MAC handle RMII + * @support_rgmii: Does the MAC handle RGMII + */ +struct emac_variant { + u32 default_syscon_value; + int internal_phy; + bool support_mii; + bool support_rmii; + bool support_rgmii; +}; + +/* struct sunxi_priv_data - hold all sunxi private data + * @tx_clk: reference to MAC TX clock + * @ephy_clk: reference to the optional EPHY clock for the internal PHY + * @regulator: reference to the optional regulator + * @rst_ephy: reference to the optional EPHY reset for the internal PHY + * @variant: reference to the current board variant + * @regmap: regmap for using the syscon + * @use_internal_phy: Does the current PHY choice imply using the internal PHY + */ +struct sunxi_priv_data { + struct clk *tx_clk; + struct clk *ephy_clk; + struct regulator *regulator; + struct reset_control *rst_ephy; + const struct emac_variant *variant; + struct regmap *regmap; + bool use_internal_phy; +}; + +static const struct emac_variant emac_variant_h3 = { + .default_syscon_value = 0x58000, + .internal_phy = PHY_INTERFACE_MODE_MII, + .support_mii = true, + .support_rmii = true, + .support_rgmii = true +}; + +static const struct emac_variant emac_variant_v3s = { + .default_syscon_value = 0x38000, + .internal_phy = PHY_INTERFACE_MODE_MII, + .support_mii = true +}; + +static const struct emac_variant emac_variant_a83t = { + .default_syscon_value = 0, + .internal_phy = 0, + .support_mii = true, + .support_rgmii = true +}; + +static const struct emac_variant emac_variant_a64 = { + .default_syscon_value = 0, + .internal_phy = 0, + .support_mii = true, + .support_rmii = true, + .support_rgmii = true +}; + +#define EMAC_BASIC_CTL0 0x00 +#define EMAC_BASIC_CTL1 0x04 +#define EMAC_INT_STA 0x08 +#define EMAC_INT_EN 0x0C +#define EMAC_TX_CTL0 0x10 +#define EMAC_TX_CTL1 0x14 +#define EMAC_TX_FLOW_CTL 0x1C +#define EMAC_TX_DESC_LIST 0x20 +#define EMAC_RX_CTL0 0x24 +#define EMAC_RX_CTL1 0x28 +#define EMAC_RX_DESC_LIST 0x34 +#define EMAC_RX_FRM_FLT 0x38 +#define EMAC_MDIO_CMD 0x48 +#define EMAC_MDIO_DATA 0x4C +#define EMAC_MACADDR_HI(reg) (0x50 + (reg) * 8) +#define EMAC_MACADDR_LO(reg) (0x54 + (reg) * 8) +#define EMAC_TX_DMA_STA 0xB0 +#define EMAC_TX_CUR_DESC 0xB4 +#define EMAC_TX_CUR_BUF 0xB8 +#define EMAC_RX_DMA_STA 0xC0 +#define EMAC_RX_CUR_DESC 0xC4 +#define EMAC_RX_CUR_BUF 0xC8 + +/* Use in EMAC_BASIC_CTL0 */ +#define EMAC_DUPLEX_FULL BIT(0) +#define EMAC_LOOPBACK BIT(1) +#define EMAC_SPEED_1000 0 +#define EMAC_SPEED_100 (0x03 << 2) +#define EMAC_SPEED_10 (0x02 << 2) + +/* Use in EMAC_BASIC_CTL1 */ +#define EMAC_BURSTLEN_SHIFT 24 + +/* Used in EMAC_RX_FRM_FLT */ +#define EMAC_FRM_FLT_RXALL BIT(0) +#define EMAC_FRM_FLT_CTL BIT(13) +#define EMAC_FRM_FLT_MULTICAST BIT(16) + +/* Used in RX_CTL1*/ +#define EMAC_RX_MD BIT(1) +#define EMAC_RX_TH_MASK GENMASK(4, 5) +#define EMAC_RX_TH_32 0 +#define EMAC_RX_TH_64 (0x1 << 4) +#define EMAC_RX_TH_96 (0x2 << 4) +#define EMAC_RX_TH_128 (0x3 << 4) +#define EMAC_RX_DMA_EN BIT(30) +#define EMAC_RX_DMA_START BIT(31) + +/* Used in TX_CTL1*/ +#define EMAC_TX_MD BIT(1) +#define EMAC_TX_NEXT_FRM BIT(2) +#define EMAC_TX_TH_MASK GENMASK(8, 10) +#define EMAC_TX_TH_64 0 +#define EMAC_TX_TH_128 (0x1 << 8) +#define EMAC_TX_TH_192 (0x2 << 8) +#define EMAC_TX_TH_256 (0x3 << 8) +#define EMAC_TX_DMA_EN BIT(30) +#define EMAC_TX_DMA_START BIT(31) + +/* Used in RX_CTL0 */ +#define EMAC_RX_RECEIVER_EN BIT(31) +#define EMAC_RX_DO_CRC BIT(27) +#define EMAC_RX_FLOW_CTL_EN BIT(16) + +/* Used in TX_CTL0 */ +#define EMAC_TX_TRANSMITTER_EN BIT(31) + +/* Used in EMAC_TX_FLOW_CTL */ +#define EMAC_TX_FLOW_CTL_EN BIT(0) + +/* Used in EMAC_INT_STA */ +#define EMAC_TX_INT BIT(0) +#define EMAC_TX_DMA_STOP_INT BIT(1) +#define EMAC_TX_BUF_UA_INT BIT(2) +#define EMAC_TX_TIMEOUT_INT BIT(3) +#define EMAC_TX_UNDERFLOW_INT BIT(4) +#define EMAC_TX_EARLY_INT BIT(5) +#define EMAC_RX_INT BIT(8) +#define EMAC_RX_BUF_UA_INT BIT(9) +#define EMAC_RX_DMA_STOP_INT BIT(10) +#define EMAC_RX_TIMEOUT_INT BIT(11) +#define EMAC_RX_OVERFLOW_INT BIT(12) +#define EMAC_RX_EARLY_INT BIT(13) +#define EMAC_RGMII_STA_INT BIT(16) + +#define MAC_ADDR_TYPE_DST BIT(31) + +/* H3 specific bits for EPHY */ +#define H3_EPHY_ADDR_SHIFT 20 +#define H3_EPHY_CLK_SEL BIT(18) /* 1: 24MHz, 0: 25MHz */ +#define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */ +#define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */ +#define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */ + +/* H3/A64 specific bits */ +#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ + +/* Generic system control EMAC_CLK bits */ +#define SYSCON_ETXDC_MASK GENMASK(2, 0) +#define SYSCON_ETXDC_SHIFT 10 +#define SYSCON_ERXDC_MASK GENMASK(4, 0) +#define SYSCON_ERXDC_SHIFT 5 +/* EMAC PHY Interface Type */ +#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */ +#define SYSCON_ETCS_MASK GENMASK(1, 0) +#define SYSCON_ETCS_MII 0x0 +#define SYSCON_ETCS_EXT_GMII 0x1 +#define SYSCON_ETCS_INT_GMII 0x2 +#define SYSCON_EMAC_REG 0x30 + +/* sun8i_dwmac_dma_reset() - reset the EMAC + * Called from stmmac via stmmac_dma_ops->reset + */ +static int sun8i_dwmac_dma_reset(void __iomem *ioaddr) +{ + writel(0, ioaddr + EMAC_RX_CTL1); + writel(0, ioaddr + EMAC_TX_CTL1); + writel(0, ioaddr + EMAC_RX_FRM_FLT); + writel(0, ioaddr + EMAC_RX_DESC_LIST); + writel(0, ioaddr + EMAC_TX_DESC_LIST); + writel(0, ioaddr + EMAC_INT_EN); + writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); + return 0; +} + +/* sun8i_dwmac_dma_init() - initialize the EMAC + * Called from stmmac via stmmac_dma_ops->init + */ +static void sun8i_dwmac_dma_init(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 dma_tx, u32 dma_rx, int atds) +{ + /* Write TX and RX descriptors address */ + writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST); + writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST); + + writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); + writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); +} + +/* sun8i_dwmac_dump_regs() - Dump EMAC address space + * Called from stmmac_dma_ops->dump_regs + * Used for ethtool + */ +static void sun8i_dwmac_dump_regs(void __iomem *ioaddr, u32 *reg_space) +{ + int i; + + for (i = 0; i < 0xC8; i += 4) { + if (i == 0x32 || i == 0x3C) + continue; + reg_space[i / 4] = readl(ioaddr + i); + } +} + +/* sun8i_dwmac_dump_mac_regs() - Dump EMAC address space + * Called from stmmac_ops->dump_regs + * Used for ethtool + */ +static void sun8i_dwmac_dump_mac_regs(struct mac_device_info *hw, + u32 *reg_space) +{ + int i; + void __iomem *ioaddr = hw->pcsr; + + for (i = 0; i < 0xC8; i += 4) { + if (i == 0x32 || i == 0x3C) + continue; + reg_space[i / 4] = readl(ioaddr + i); + } +} + +static void sun8i_dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan) +{ + writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); +} + +static void sun8i_dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan) +{ + writel(0, ioaddr + EMAC_INT_EN); +} + +static void sun8i_dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + v |= EMAC_TX_DMA_START; + v |= EMAC_TX_DMA_EN; + writel(v, ioaddr + EMAC_TX_CTL1); +} + +static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + v |= EMAC_TX_DMA_START; + v |= EMAC_TX_DMA_EN; + writel(v, ioaddr + EMAC_TX_CTL1); +} + +static void sun8i_dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + v &= ~EMAC_TX_DMA_EN; + writel(v, ioaddr + EMAC_TX_CTL1); +} + +static void sun8i_dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL1); + v |= EMAC_RX_DMA_START; + v |= EMAC_RX_DMA_EN; + writel(v, ioaddr + EMAC_RX_CTL1); +} + +static void sun8i_dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL1); + v &= ~EMAC_RX_DMA_EN; + writel(v, ioaddr + EMAC_RX_CTL1); +} + +static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr, + struct stmmac_extra_stats *x, u32 chan) +{ + u32 v; + int ret = 0; + + v = readl(ioaddr + EMAC_INT_STA); + + if (v & EMAC_TX_INT) { + ret |= handle_tx; + x->tx_normal_irq_n++; + } + + if (v & EMAC_TX_DMA_STOP_INT) + x->tx_process_stopped_irq++; + + if (v & EMAC_TX_BUF_UA_INT) + x->tx_process_stopped_irq++; + + if (v & EMAC_TX_TIMEOUT_INT) + ret |= tx_hard_error; + + if (v & EMAC_TX_UNDERFLOW_INT) { + ret |= tx_hard_error; + x->tx_undeflow_irq++; + } + + if (v & EMAC_TX_EARLY_INT) + x->tx_early_irq++; + + if (v & EMAC_RX_INT) { + ret |= handle_rx; + x->rx_normal_irq_n++; + } + + if (v & EMAC_RX_BUF_UA_INT) + x->rx_buf_unav_irq++; + + if (v & EMAC_RX_DMA_STOP_INT) + x->rx_process_stopped_irq++; + + if (v & EMAC_RX_TIMEOUT_INT) + ret |= tx_hard_error; + + if (v & EMAC_RX_OVERFLOW_INT) { + ret |= tx_hard_error; + x->rx_overflow_irq++; + } + + if (v & EMAC_RX_EARLY_INT) + x->rx_early_irq++; + + if (v & EMAC_RGMII_STA_INT) + x->irq_rgmii_n++; + + writel(v, ioaddr + EMAC_INT_STA); + + return ret; +} + +static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode, + int rxmode, int rxfifosz) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + if (txmode == SF_DMA_MODE) { + v |= EMAC_TX_MD; + /* Undocumented bit (called TX_NEXT_FRM in BSP), the original + * comment is + * "Operating on second frame increase the performance + * especially when transmit store-and-forward is used." + */ + v |= EMAC_TX_NEXT_FRM; + } else { + v &= ~EMAC_TX_MD; + v &= ~EMAC_TX_TH_MASK; + if (txmode < 64) + v |= EMAC_TX_TH_64; + else if (txmode < 128) + v |= EMAC_TX_TH_128; + else if (txmode < 192) + v |= EMAC_TX_TH_192; + else if (txmode < 256) + v |= EMAC_TX_TH_256; + } + writel(v, ioaddr + EMAC_TX_CTL1); + + v = readl(ioaddr + EMAC_RX_CTL1); + if (rxmode == SF_DMA_MODE) { + v |= EMAC_RX_MD; + } else { + v &= ~EMAC_RX_MD; + v &= ~EMAC_RX_TH_MASK; + if (rxmode < 32) + v |= EMAC_RX_TH_32; + else if (rxmode < 64) + v |= EMAC_RX_TH_64; + else if (rxmode < 96) + v |= EMAC_RX_TH_96; + else if (rxmode < 128) + v |= EMAC_RX_TH_128; + } + writel(v, ioaddr + EMAC_RX_CTL1); +} + +static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = { + .reset = sun8i_dwmac_dma_reset, + .init = sun8i_dwmac_dma_init, + .dump_regs = sun8i_dwmac_dump_regs, + .dma_mode = sun8i_dwmac_dma_operation_mode, + .enable_dma_transmission = sun8i_dwmac_enable_dma_transmission, + .enable_dma_irq = sun8i_dwmac_enable_dma_irq, + .disable_dma_irq = sun8i_dwmac_disable_dma_irq, + .start_tx = sun8i_dwmac_dma_start_tx, + .stop_tx = sun8i_dwmac_dma_stop_tx, + .start_rx = sun8i_dwmac_dma_start_rx, + .stop_rx = sun8i_dwmac_dma_stop_rx, + .dma_interrupt = sun8i_dwmac_dma_interrupt, +}; + +static int sun8i_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct sunxi_priv_data *gmac = priv; + int ret; + + if (gmac->regulator) { + ret = regulator_enable(gmac->regulator); + if (ret) { + dev_err(&pdev->dev, "Fail to enable regulator\n"); + return ret; + } + } + + ret = clk_prepare_enable(gmac->tx_clk); + if (ret) { + if (gmac->regulator) + regulator_disable(gmac->regulator); + dev_err(&pdev->dev, "Could not enable AHB clock\n"); + return ret; + } + + return 0; +} + +static void sun8i_dwmac_core_init(struct mac_device_info *hw, int mtu) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + v = (8 << EMAC_BURSTLEN_SHIFT); /* burst len */ + writel(v, ioaddr + EMAC_BASIC_CTL1); +} + +static void sun8i_dwmac_set_mac(void __iomem *ioaddr, bool enable) +{ + u32 t, r; + + t = readl(ioaddr + EMAC_TX_CTL0); + r = readl(ioaddr + EMAC_RX_CTL0); + if (enable) { + t |= EMAC_TX_TRANSMITTER_EN; + r |= EMAC_RX_RECEIVER_EN; + } else { + t &= ~EMAC_TX_TRANSMITTER_EN; + r &= ~EMAC_RX_RECEIVER_EN; + } + writel(t, ioaddr + EMAC_TX_CTL0); + writel(r, ioaddr + EMAC_RX_CTL0); +} + +/* Set MAC address at slot reg_n + * All slot > 0 need to be enabled with MAC_ADDR_TYPE_DST + * If addr is NULL, clear the slot + */ +static void sun8i_dwmac_set_umac_addr(struct mac_device_info *hw, + unsigned char *addr, + unsigned int reg_n) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + if (!addr) { + writel(0, ioaddr + EMAC_MACADDR_HI(reg_n)); + return; + } + + stmmac_set_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n), + EMAC_MACADDR_LO(reg_n)); + if (reg_n > 0) { + v = readl(ioaddr + EMAC_MACADDR_HI(reg_n)); + v |= MAC_ADDR_TYPE_DST; + writel(v, ioaddr + EMAC_MACADDR_HI(reg_n)); + } +} + +static void sun8i_dwmac_get_umac_addr(struct mac_device_info *hw, + unsigned char *addr, + unsigned int reg_n) +{ + void __iomem *ioaddr = hw->pcsr; + + stmmac_get_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n), + EMAC_MACADDR_LO(reg_n)); +} + +/* caution this function must return non 0 to work */ +static int sun8i_dwmac_rx_ipc_enable(struct mac_device_info *hw) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL0); + v |= EMAC_RX_DO_CRC; + writel(v, ioaddr + EMAC_RX_CTL0); + + return 1; +} + +static void sun8i_dwmac_set_filter(struct mac_device_info *hw, + struct net_device *dev) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + int i = 1; + struct netdev_hw_addr *ha; + int macaddrs = netdev_uc_count(dev) + netdev_mc_count(dev) + 1; + + v = EMAC_FRM_FLT_CTL; + + if (dev->flags & IFF_PROMISC) { + v = EMAC_FRM_FLT_RXALL; + } else if (dev->flags & IFF_ALLMULTI) { + v |= EMAC_FRM_FLT_MULTICAST; + } else if (macaddrs <= hw->unicast_filter_entries) { + if (!netdev_mc_empty(dev)) { + netdev_for_each_mc_addr(ha, dev) { + sun8i_dwmac_set_umac_addr(hw, ha->addr, i); + i++; + } + } + if (!netdev_uc_empty(dev)) { + netdev_for_each_uc_addr(ha, dev) { + sun8i_dwmac_set_umac_addr(hw, ha->addr, i); + i++; + } + } + } else { + netdev_info(dev, "Too many address, switching to promiscuous\n"); + v = EMAC_FRM_FLT_RXALL; + } + + /* Disable unused address filter slots */ + while (i < hw->unicast_filter_entries) + sun8i_dwmac_set_umac_addr(hw, NULL, i++); + + writel(v, ioaddr + EMAC_RX_FRM_FLT); +} + +static void sun8i_dwmac_flow_ctrl(struct mac_device_info *hw, + unsigned int duplex, unsigned int fc, + unsigned int pause_time, u32 tx_cnt) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL0); + if (fc == FLOW_AUTO) + v |= EMAC_RX_FLOW_CTL_EN; + else + v &= ~EMAC_RX_FLOW_CTL_EN; + writel(v, ioaddr + EMAC_RX_CTL0); + + v = readl(ioaddr + EMAC_TX_FLOW_CTL); + if (fc == FLOW_AUTO) + v |= EMAC_TX_FLOW_CTL_EN; + else + v &= ~EMAC_TX_FLOW_CTL_EN; + writel(v, ioaddr + EMAC_TX_FLOW_CTL); +} + +static int sun8i_dwmac_reset(struct stmmac_priv *priv) +{ + u32 v; + int err; + + v = readl(priv->ioaddr + EMAC_BASIC_CTL1); + writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1); + + /* The timeout was previoulsy set to 10ms, but some board (OrangePI0) + * need more if no cable plugged. 100ms seems OK + */ + err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v, + !(v & 0x01), 100, 100000); + + if (err) { + dev_err(priv->device, "EMAC reset timeout\n"); + return -EFAULT; + } + return 0; +} + +static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + struct device_node *node = priv->device->of_node; + int ret; + u32 reg, val; + + regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val); + reg = gmac->variant->default_syscon_value; + if (reg != val) + dev_warn(priv->device, + "Current syscon value is not the default %x (expect %x)\n", + val, reg); + + if (gmac->variant->internal_phy) { + if (!gmac->use_internal_phy) { + /* switch to external PHY interface */ + reg &= ~H3_EPHY_SELECT; + } else { + reg |= H3_EPHY_SELECT; + reg &= ~H3_EPHY_SHUTDOWN; + dev_dbg(priv->device, "Select internal_phy %x\n", reg); + + if (of_property_read_bool(priv->plat->phy_node, + "allwinner,leds-active-low")) + reg |= H3_EPHY_LED_POL; + else + reg &= ~H3_EPHY_LED_POL; + + /* Force EPHY xtal frequency to 24MHz. */ + reg |= H3_EPHY_CLK_SEL; + + ret = of_mdio_parse_addr(priv->device, + priv->plat->phy_node); + if (ret < 0) { + dev_err(priv->device, "Could not parse MDIO addr\n"); + return ret; + } + /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY + * address. No need to mask it again. + */ + reg |= ret << H3_EPHY_ADDR_SHIFT; + } + } + + if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) { + if (val % 100) { + dev_err(priv->device, "tx-delay must be a multiple of 100\n"); + return -EINVAL; + } + val /= 100; + dev_dbg(priv->device, "set tx-delay to %x\n", val); + if (val <= SYSCON_ETXDC_MASK) { + reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT); + reg |= (val << SYSCON_ETXDC_SHIFT); + } else { + dev_err(priv->device, "Invalid TX clock delay: %d\n", + val); + return -EINVAL; + } + } + + if (!of_property_read_u32(node, "allwinner,rx-delay-ps", &val)) { + if (val % 100) { + dev_err(priv->device, "rx-delay must be a multiple of 100\n"); + return -EINVAL; + } + val /= 100; + dev_dbg(priv->device, "set rx-delay to %x\n", val); + if (val <= SYSCON_ERXDC_MASK) { + reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT); + reg |= (val << SYSCON_ERXDC_SHIFT); + } else { + dev_err(priv->device, "Invalid RX clock delay: %d\n", + val); + return -EINVAL; + } + } + + /* Clear interface mode bits */ + reg &= ~(SYSCON_ETCS_MASK | SYSCON_EPIT); + if (gmac->variant->support_rmii) + reg &= ~SYSCON_RMII_EN; + + switch (priv->plat->interface) { + case PHY_INTERFACE_MODE_MII: + /* default */ + break; + case PHY_INTERFACE_MODE_RGMII: + reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII; + break; + case PHY_INTERFACE_MODE_RMII: + reg |= SYSCON_RMII_EN | SYSCON_ETCS_EXT_GMII; + break; + default: + dev_err(priv->device, "Unsupported interface mode: %s", + phy_modes(priv->plat->interface)); + return -EINVAL; + } + + regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); + + return 0; +} + +static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac) +{ + u32 reg = gmac->variant->default_syscon_value; + + regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); +} + +static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + int ret; + + if (!gmac->use_internal_phy) + return 0; + + ret = clk_prepare_enable(gmac->ephy_clk); + if (ret) { + dev_err(priv->device, "Cannot enable ephy\n"); + return ret; + } + + /* Make sure the EPHY is properly reseted, as U-Boot may leave + * it at deasserted state, and thus it may fail to reset EMAC. + */ + reset_control_assert(gmac->rst_ephy); + + ret = reset_control_deassert(gmac->rst_ephy); + if (ret) { + dev_err(priv->device, "Cannot deassert ephy\n"); + clk_disable_unprepare(gmac->ephy_clk); + return ret; + } + + return 0; +} + +static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) +{ + if (!gmac->use_internal_phy) + return 0; + + clk_disable_unprepare(gmac->ephy_clk); + reset_control_assert(gmac->rst_ephy); + return 0; +} + +/* sun8i_power_phy() - Activate the PHY: + * In case of error, no need to call sun8i_unpower_phy(), + * it will be called anyway by sun8i_dwmac_exit() + */ +static int sun8i_power_phy(struct stmmac_priv *priv) +{ + int ret; + + ret = sun8i_dwmac_power_internal_phy(priv); + if (ret) + return ret; + + ret = sun8i_dwmac_set_syscon(priv); + if (ret) + return ret; + + /* After changing syscon value, the MAC need reset or it will use + * the last value (and so the last PHY set. + */ + ret = sun8i_dwmac_reset(priv); + if (ret) + return ret; + return 0; +} + +static void sun8i_unpower_phy(struct sunxi_priv_data *gmac) +{ + sun8i_dwmac_unset_syscon(gmac); + sun8i_dwmac_unpower_internal_phy(gmac); +} + +static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct sunxi_priv_data *gmac = priv; + + sun8i_unpower_phy(gmac); + + clk_disable_unprepare(gmac->tx_clk); + + if (gmac->regulator) + regulator_disable(gmac->regulator); +} + +static const struct stmmac_ops sun8i_dwmac_ops = { + .core_init = sun8i_dwmac_core_init, + .set_mac = sun8i_dwmac_set_mac, + .dump_regs = sun8i_dwmac_dump_mac_regs, + .rx_ipc = sun8i_dwmac_rx_ipc_enable, + .set_filter = sun8i_dwmac_set_filter, + .flow_ctrl = sun8i_dwmac_flow_ctrl, + .set_umac_addr = sun8i_dwmac_set_umac_addr, + .get_umac_addr = sun8i_dwmac_get_umac_addr, +}; + +static struct mac_device_info *sun8i_dwmac_setup(void *ppriv) +{ + struct mac_device_info *mac; + struct stmmac_priv *priv = ppriv; + int ret; + + mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL); + if (!mac) + return NULL; + + ret = sun8i_power_phy(priv); + if (ret) + return NULL; + + mac->pcsr = priv->ioaddr; + mac->mac = &sun8i_dwmac_ops; + mac->dma = &sun8i_dwmac_dma_ops; + + /* The loopback bit seems to be re-set when link change + * Simply mask it each time + * Speed 10/100/1000 are set in BIT(2)/BIT(3) + */ + mac->link.speed_mask = GENMASK(3, 2) | EMAC_LOOPBACK; + mac->link.speed10 = EMAC_SPEED_10; + mac->link.speed100 = EMAC_SPEED_100; + mac->link.speed1000 = EMAC_SPEED_1000; + mac->link.duplex = EMAC_DUPLEX_FULL; + mac->mii.addr = EMAC_MDIO_CMD; + mac->mii.data = EMAC_MDIO_DATA; + mac->mii.reg_shift = 4; + mac->mii.reg_mask = GENMASK(8, 4); + mac->mii.addr_shift = 12; + mac->mii.addr_mask = GENMASK(16, 12); + mac->mii.clk_csr_shift = 20; + mac->mii.clk_csr_mask = GENMASK(22, 20); + mac->unicast_filter_entries = 8; + + /* Synopsys Id is not available */ + priv->synopsys_id = 0; + + return mac; +} + +static int sun8i_dwmac_probe(struct platform_device *pdev) +{ + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + struct sunxi_priv_data *gmac; + struct device *dev = &pdev->dev; + int ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); + if (!gmac) + return -ENOMEM; + + gmac->variant = of_device_get_match_data(&pdev->dev); + if (!gmac->variant) { + dev_err(&pdev->dev, "Missing dwmac-sun8i variant\n"); + return -EINVAL; + } + + gmac->tx_clk = devm_clk_get(dev, "stmmaceth"); + if (IS_ERR(gmac->tx_clk)) { + dev_err(dev, "Could not get TX clock\n"); + return PTR_ERR(gmac->tx_clk); + } + + /* Optional regulator for PHY */ + gmac->regulator = devm_regulator_get_optional(dev, "phy"); + if (IS_ERR(gmac->regulator)) { + if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No regulator found\n"); + gmac->regulator = NULL; + } + + gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "syscon"); + if (IS_ERR(gmac->regmap)) { + ret = PTR_ERR(gmac->regmap); + dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret); + return ret; + } + + plat_dat->interface = of_get_phy_mode(dev->of_node); + if (plat_dat->interface == gmac->variant->internal_phy) { + dev_info(&pdev->dev, "Will use internal PHY\n"); + gmac->use_internal_phy = true; + gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0); + if (IS_ERR(gmac->ephy_clk)) { + ret = PTR_ERR(gmac->ephy_clk); + dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret); + return -EINVAL; + } + + gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL); + if (IS_ERR(gmac->rst_ephy)) { + ret = PTR_ERR(gmac->rst_ephy); + if (ret == -EPROBE_DEFER) + return ret; + dev_err(&pdev->dev, "No EPHY reset control found %d\n", + ret); + return -EINVAL; + } + } else { + dev_info(&pdev->dev, "Will use external PHY\n"); + gmac->use_internal_phy = false; + } + + /* platform data specifying hardware features and callbacks. + * hardware features were copied from Allwinner drivers. + */ + plat_dat->rx_coe = STMMAC_RX_COE_TYPE2; + plat_dat->tx_coe = 1; + plat_dat->has_sun8i = true; + plat_dat->bsp_priv = gmac; + plat_dat->init = sun8i_dwmac_init; + plat_dat->exit = sun8i_dwmac_exit; + plat_dat->setup = sun8i_dwmac_setup; + + ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv); + if (ret) + return ret; + + ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + if (ret) + sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); + + return ret; +} + +static const struct of_device_id sun8i_dwmac_match[] = { + { .compatible = "allwinner,sun8i-h3-emac", + .data = &emac_variant_h3 }, + { .compatible = "allwinner,sun8i-v3s-emac", + .data = &emac_variant_v3s }, + { .compatible = "allwinner,sun8i-a83t-emac", + .data = &emac_variant_a83t }, + { .compatible = "allwinner,sun50i-a64-emac", + .data = &emac_variant_a64 }, + { } +}; +MODULE_DEVICE_TABLE(of, sun8i_dwmac_match); + +static struct platform_driver sun8i_dwmac_driver = { + .probe = sun8i_dwmac_probe, + .remove = stmmac_pltfr_remove, + .driver = { + .name = "dwmac-sun8i", + .pm = &stmmac_pltfr_pm_ops, + .of_match_table = sun8i_dwmac_match, + }, +}; +module_platform_driver(sun8i_dwmac_driver); + +MODULE_AUTHOR("Corentin Labbe <clabbe.montjoie@gmail.com>"); +MODULE_DESCRIPTION("Allwinner sun8i DWMAC specific glue layer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index f3d9305e5f70..8a86340ff2d3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -45,15 +45,17 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu) if (hw->ps) { value |= GMAC_CONTROL_TE; - if (hw->ps == SPEED_1000) { - value &= ~GMAC_CONTROL_PS; - } else { - value |= GMAC_CONTROL_PS; - - if (hw->ps == SPEED_10) - value &= ~GMAC_CONTROL_FES; - else - value |= GMAC_CONTROL_FES; + value &= ~hw->link.speed_mask; + switch (hw->ps) { + case SPEED_1000: + value |= hw->link.speed1000; + break; + case SPEED_100: + value |= hw->link.speed100; + break; + case SPEED_10: + value |= hw->link.speed10; + break; } } @@ -531,9 +533,11 @@ struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins, mac->mac = &dwmac1000_ops; mac->dma = &dwmac1000_dma_ops; - mac->link.port = GMAC_CONTROL_PS; mac->link.duplex = GMAC_CONTROL_DM; - mac->link.speed = GMAC_CONTROL_FES; + mac->link.speed10 = GMAC_CONTROL_PS; + mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->link.speed1000 = 0; + mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES; mac->mii.addr = GMAC_MII_ADDR; mac->mii.data = GMAC_MII_DATA; mac->mii.addr_shift = 11; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 471a9aa6ac94..22cf6353ba04 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -205,8 +205,8 @@ static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space) { int i; - for (i = 0; i < 22; i++) - if ((i < 9) || (i > 17)) + for (i = 0; i < 23; i++) + if ((i < 12) || (i > 17)) reg_space[DMA_BUS_MODE / 4 + i] = readl(ioaddr + DMA_BUS_MODE + i * 4); } diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c index 1b3609105484..8ef517356313 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c @@ -175,9 +175,11 @@ struct mac_device_info *dwmac100_setup(void __iomem *ioaddr, int *synopsys_id) mac->mac = &dwmac100_ops; mac->dma = &dwmac100_dma_ops; - mac->link.port = MAC_CONTROL_PS; mac->link.duplex = MAC_CONTROL_F; - mac->link.speed = 0; + mac->link.speed10 = 0; + mac->link.speed100 = 0; + mac->link.speed1000 = 0; + mac->link.speed_mask = MAC_CONTROL_PS; mac->mii.addr = MAC_MII_ADDR; mac->mii.data = MAC_MII_DATA; mac->mii.addr_shift = 11; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 48793f2e9307..f233bf8b4ebb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -35,15 +35,17 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu) if (hw->ps) { value |= GMAC_CONFIG_TE; - if (hw->ps == SPEED_1000) { - value &= ~GMAC_CONFIG_PS; - } else { - value |= GMAC_CONFIG_PS; - - if (hw->ps == SPEED_10) - value &= ~GMAC_CONFIG_FES; - else - value |= GMAC_CONFIG_FES; + value &= hw->link.speed_mask; + switch (hw->ps) { + case SPEED_1000: + value |= hw->link.speed1000; + break; + case SPEED_100: + value |= hw->link.speed100; + break; + case SPEED_10: + value |= hw->link.speed10; + break; } } @@ -747,9 +749,11 @@ struct mac_device_info *dwmac4_setup(void __iomem *ioaddr, int mcbins, if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); - mac->link.port = GMAC_CONFIG_PS; mac->link.duplex = GMAC_CONFIG_DM; - mac->link.speed = GMAC_CONFIG_FES; + mac->link.speed10 = GMAC_CONFIG_PS; + mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS; + mac->link.speed1000 = 0; + mac->link.speed_mask = GMAC_CONFIG_FES | GMAC_CONFIG_PS; mac->mii.addr = GMAC_MDIO_ADDR; mac->mii.data = GMAC_MDIO_DATA; mac->mii.addr_shift = 21; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index eec8463057fd..e84831e1b63b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -71,9 +71,9 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) writel(value, ioaddr + DMA_SYS_BUS_MODE); } -void dwmac4_dma_init_rx_chan(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, - u32 dma_rx_phy, u32 chan) +static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 dma_rx_phy, u32 chan) { u32 value; u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; @@ -85,9 +85,9 @@ void dwmac4_dma_init_rx_chan(void __iomem *ioaddr, writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan)); } -void dwmac4_dma_init_tx_chan(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, - u32 dma_tx_phy, u32 chan) +static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 dma_tx_phy, u32 chan) { u32 value; u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; @@ -99,8 +99,8 @@ void dwmac4_dma_init_tx_chan(void __iomem *ioaddr, writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan)); } -void dwmac4_dma_init_channel(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, u32 chan) +static void dwmac4_dma_init_channel(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, u32 chan) { u32 value; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c index 38f94305aab5..67af0bdd7f10 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c @@ -248,6 +248,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; writel(data, ioaddr + low); } +EXPORT_SYMBOL_GPL(stmmac_set_mac_addr); /* Enable disable MAC RX/TX */ void stmmac_set_mac(void __iomem *ioaddr, bool enable) @@ -279,4 +280,4 @@ void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, addr[4] = hi_addr & 0xff; addr[5] = (hi_addr >> 8) & 0xff; } - +EXPORT_SYMBOL_GPL(stmmac_get_mac_addr); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 33efe7038cab..a916e13624eb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -104,7 +104,7 @@ struct stmmac_priv { /* TX Queue */ struct stmmac_tx_queue tx_queue[MTL_MAX_TX_QUEUES]; - int oldlink; + bool oldlink; int speed; int oldduplex; unsigned int flow_ctrl; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index 16808e48ca1c..babb39c646ff 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -29,7 +29,7 @@ #include "stmmac.h" #include "dwmac_dma.h" -#define REG_SPACE_SIZE 0x1054 +#define REG_SPACE_SIZE 0x1060 #define MAC100_ETHTOOL_NAME "st_mac100" #define GMAC_ETHTOOL_NAME "st_gmac" @@ -273,7 +273,6 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev, { struct stmmac_priv *priv = netdev_priv(dev); struct phy_device *phy = dev->phydev; - int rc; if (priv->hw->pcs & STMMAC_PCS_RGMII || priv->hw->pcs & STMMAC_PCS_SGMII) { @@ -364,8 +363,8 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev, "link speed / duplex setting\n", dev->name); return -EBUSY; } - rc = phy_ethtool_ksettings_get(phy, cmd); - return rc; + phy_ethtool_ksettings_get(phy, cmd); + return 0; } static int diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6e4cbc6ce0ef..1853f7ff6657 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -235,6 +235,17 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M)) priv->clk_csr = STMMAC_CSR_250_300M; } + + if (priv->plat->has_sun8i) { + if (clk_rate > 160000000) + priv->clk_csr = 0x03; + else if (clk_rate > 80000000) + priv->clk_csr = 0x02; + else if (clk_rate > 40000000) + priv->clk_csr = 0x01; + else + priv->clk_csr = 0; + } } static void print_pkt(unsigned char *buf, int len) @@ -653,6 +664,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) ptp_over_ethernet = PTP_TCR_TSIPENA; break; + case HWTSTAMP_FILTER_NTP_ALL: case HWTSTAMP_FILTER_ALL: /* time stamp any incoming packet */ config.rx_filter = HWTSTAMP_FILTER_ALL; @@ -783,7 +795,7 @@ static void stmmac_adjust_link(struct net_device *dev) struct stmmac_priv *priv = netdev_priv(dev); struct phy_device *phydev = dev->phydev; unsigned long flags; - int new_state = 0; + bool new_state = false; if (!phydev) return; @@ -796,8 +808,8 @@ static void stmmac_adjust_link(struct net_device *dev) /* Now we make sure that we can be in full duplex mode. * If not, we operate in half-duplex mode. */ if (phydev->duplex != priv->oldduplex) { - new_state = 1; - if (!(phydev->duplex)) + new_state = true; + if (!phydev->duplex) ctrl &= ~priv->hw->link.duplex; else ctrl |= priv->hw->link.duplex; @@ -808,30 +820,17 @@ static void stmmac_adjust_link(struct net_device *dev) stmmac_mac_flow_ctrl(priv, phydev->duplex); if (phydev->speed != priv->speed) { - new_state = 1; + new_state = true; + ctrl &= ~priv->hw->link.speed_mask; switch (phydev->speed) { - case 1000: - if (priv->plat->has_gmac || - priv->plat->has_gmac4) - ctrl &= ~priv->hw->link.port; + case SPEED_1000: + ctrl |= priv->hw->link.speed1000; break; - case 100: - if (priv->plat->has_gmac || - priv->plat->has_gmac4) { - ctrl |= priv->hw->link.port; - ctrl |= priv->hw->link.speed; - } else { - ctrl &= ~priv->hw->link.port; - } + case SPEED_100: + ctrl |= priv->hw->link.speed100; break; - case 10: - if (priv->plat->has_gmac || - priv->plat->has_gmac4) { - ctrl |= priv->hw->link.port; - ctrl &= ~(priv->hw->link.speed); - } else { - ctrl &= ~priv->hw->link.port; - } + case SPEED_10: + ctrl |= priv->hw->link.speed10; break; default: netif_warn(priv, link, priv->dev, @@ -847,12 +846,12 @@ static void stmmac_adjust_link(struct net_device *dev) writel(ctrl, priv->ioaddr + MAC_CTRL_REG); if (!priv->oldlink) { - new_state = 1; - priv->oldlink = 1; + new_state = true; + priv->oldlink = true; } } else if (priv->oldlink) { - new_state = 1; - priv->oldlink = 0; + new_state = true; + priv->oldlink = false; priv->speed = SPEED_UNKNOWN; priv->oldduplex = DUPLEX_UNKNOWN; } @@ -915,7 +914,7 @@ static int stmmac_init_phy(struct net_device *dev) char bus_id[MII_BUS_ID_SIZE]; int interface = priv->plat->interface; int max_speed = priv->plat->max_speed; - priv->oldlink = 0; + priv->oldlink = false; priv->speed = SPEED_UNKNOWN; priv->oldduplex = DUPLEX_UNKNOWN; @@ -1450,7 +1449,7 @@ static void free_dma_rx_desc_resources(struct stmmac_priv *priv) static void free_dma_tx_desc_resources(struct stmmac_priv *priv) { u32 tx_count = priv->plat->tx_queues_to_use; - u32 queue = 0; + u32 queue; /* Free TX queue resources */ for (queue = 0; queue < tx_count; queue++) { @@ -1499,7 +1498,7 @@ static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv) sizeof(dma_addr_t), GFP_KERNEL); if (!rx_q->rx_skbuff_dma) - return -ENOMEM; + goto err_dma; rx_q->rx_skbuff = kmalloc_array(DMA_RX_SIZE, sizeof(struct sk_buff *), @@ -1562,13 +1561,13 @@ static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv) sizeof(*tx_q->tx_skbuff_dma), GFP_KERNEL); if (!tx_q->tx_skbuff_dma) - return -ENOMEM; + goto err_dma; tx_q->tx_skbuff = kmalloc_array(DMA_TX_SIZE, sizeof(struct sk_buff *), GFP_KERNEL); if (!tx_q->tx_skbuff) - goto err_dma_buffers; + goto err_dma; if (priv->extend_desc) { tx_q->dma_etx = dma_zalloc_coherent(priv->device, @@ -1578,7 +1577,7 @@ static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv) &tx_q->dma_tx_phy, GFP_KERNEL); if (!tx_q->dma_etx) - goto err_dma_buffers; + goto err_dma; } else { tx_q->dma_tx = dma_zalloc_coherent(priv->device, DMA_TX_SIZE * @@ -1587,13 +1586,13 @@ static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv) &tx_q->dma_tx_phy, GFP_KERNEL); if (!tx_q->dma_tx) - goto err_dma_buffers; + goto err_dma; } } return 0; -err_dma_buffers: +err_dma: free_dma_tx_desc_resources(priv); return ret; @@ -2895,8 +2894,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) priv->xstats.tx_set_ic_bit++; } - if (!priv->hwts_tx_en) - skb_tx_timestamp(skb); + skb_tx_timestamp(skb); if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)) { @@ -2974,7 +2972,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Manage oversized TCP frames for GMAC4 device */ if (skb_is_gso(skb) && priv->tso) { - if (ip_hdr(skb)->protocol == IPPROTO_TCP) + if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) return stmmac_tso_xmit(skb, dev); } @@ -3105,8 +3103,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) priv->xstats.tx_set_ic_bit++; } - if (!priv->hwts_tx_en) - skb_tx_timestamp(skb); + skb_tx_timestamp(skb); /* Ready to fill the first descriptor and set the OWN bit w/o any * problems because all the descriptors are actually ready to be @@ -3969,7 +3966,9 @@ static int stmmac_hw_init(struct stmmac_priv *priv) struct mac_device_info *mac; /* Identify the MAC HW device */ - if (priv->plat->has_gmac) { + if (priv->plat->setup) { + mac = priv->plat->setup(priv); + } else if (priv->plat->has_gmac) { priv->dev->priv_flags |= IFF_UNICAST_FLT; mac = dwmac1000_setup(priv->ioaddr, priv->plat->multicast_filter_bins, @@ -3989,6 +3988,10 @@ static int stmmac_hw_init(struct stmmac_priv *priv) priv->hw = mac; + /* dwmac-sun8i only work in chain mode */ + if (priv->plat->has_sun8i) + chain_mode = 1; + /* To use the chained or ring mode */ if (priv->synopsys_id >= DWMAC_CORE_4_00) { priv->hw->mode = &dwmac4_ring_mode_ops; @@ -4135,7 +4138,7 @@ int stmmac_dvr_probe(struct device *device, NETIF_F_RXCSUM; if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) { - ndev->hw_features |= NETIF_F_TSO; + ndev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6; priv->tso = true; dev_info(priv->device, "TSO feature enabled\n"); } @@ -4314,7 +4317,7 @@ int stmmac_suspend(struct device *dev) } spin_unlock_irqrestore(&priv->lock, flags); - priv->oldlink = 0; + priv->oldlink = false; priv->speed = SPEED_UNKNOWN; priv->oldduplex = DUPLEX_UNKNOWN; return 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 22f910795be4..8d375e51a526 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -30,42 +30,39 @@ * negative value of the address means that MAC controller is not connected * with PHY. */ -struct stmmac_pci_dmi_data { - const char *name; - const char *asset_tag; +struct stmmac_pci_func_data { unsigned int func; int phy_addr; }; +struct stmmac_pci_dmi_data { + const struct stmmac_pci_func_data *func; + size_t nfuncs; +}; + struct stmmac_pci_info { - struct pci_dev *pdev; - int (*setup)(struct plat_stmmacenet_data *plat, - struct stmmac_pci_info *info); - struct stmmac_pci_dmi_data *dmi; + int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); }; -static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info) +static int stmmac_pci_find_phy_addr(struct pci_dev *pdev, + const struct dmi_system_id *dmi_list) { - const char *name = dmi_get_system_info(DMI_BOARD_NAME); - const char *asset_tag = dmi_get_system_info(DMI_BOARD_ASSET_TAG); - unsigned int func = PCI_FUNC(info->pdev->devfn); - struct stmmac_pci_dmi_data *dmi; + const struct stmmac_pci_func_data *func_data; + const struct stmmac_pci_dmi_data *dmi_data; + const struct dmi_system_id *dmi_id; + int func = PCI_FUNC(pdev->devfn); + size_t n; - /* - * Galileo boards with old firmware don't support DMI. We always return - * 1 here, so at least first found MAC controller would be probed. - */ - if (!name) - return 1; - - for (dmi = info->dmi; dmi->name && *dmi->name; dmi++) { - if (!strcmp(dmi->name, name) && dmi->func == func) { - /* If asset tag is provided, match on it as well. */ - if (dmi->asset_tag && strcmp(dmi->asset_tag, asset_tag)) - continue; - return dmi->phy_addr; - } - } + dmi_id = dmi_first_match(dmi_list); + if (!dmi_id) + return -ENODEV; + + dmi_data = dmi_id->driver_data; + func_data = dmi_data->func; + + for (n = 0; n < dmi_data->nfuncs; n++, func_data++) + if (func_data->func == func) + return func_data->phy_addr; return -ENODEV; } @@ -100,7 +97,8 @@ static void common_default_data(struct plat_stmmacenet_data *plat) plat->rx_queues_cfg[0].pkt_route = 0x0; } -static void stmmac_default_data(struct plat_stmmacenet_data *plat) +static int stmmac_default_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) { /* Set common default data first */ common_default_data(plat); @@ -112,12 +110,77 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat) plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; /* TODO: AXI */ + + return 0; } -static int quark_default_data(struct plat_stmmacenet_data *plat, - struct stmmac_pci_info *info) +static const struct stmmac_pci_info stmmac_pci_info = { + .setup = stmmac_default_data, +}; + +static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = { + { + .func = 6, + .phy_addr = 1, + }, +}; + +static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = { + .func = galileo_stmmac_func_data, + .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data), +}; + +static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = { + { + .func = 6, + .phy_addr = 1, + }, + { + .func = 7, + .phy_addr = 1, + }, +}; + +static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = { + .func = iot2040_stmmac_func_data, + .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data), +}; + +static const struct dmi_system_id quark_pci_dmi[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, + "6ES7647-0AA00-0YA2"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, + "6ES7647-0AA00-1YA2"), + }, + .driver_data = (void *)&iot2040_stmmac_dmi_data, + }, + {} +}; + +static int quark_default_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) { - struct pci_dev *pdev = info->pdev; int ret; /* Set common default data first */ @@ -127,9 +190,19 @@ static int quark_default_data(struct plat_stmmacenet_data *plat, * Refuse to load the driver and register net device if MAC controller * does not connect to any PHY interface. */ - ret = stmmac_pci_find_phy_addr(info); - if (ret < 0) - return ret; + ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi); + if (ret < 0) { + /* Return error to the caller on DMI enabled boards. */ + if (dmi_get_system_info(DMI_BOARD_NAME)) + return ret; + + /* + * Galileo boards with old firmware don't support DMI. We always + * use 1 here as PHY address, so at least the first found MAC + * controller would be probed. + */ + ret = 1; + } plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn); plat->phy_addr = ret; @@ -143,41 +216,8 @@ static int quark_default_data(struct plat_stmmacenet_data *plat, return 0; } -static struct stmmac_pci_dmi_data quark_pci_dmi_data[] = { - { - .name = "Galileo", - .func = 6, - .phy_addr = 1, - }, - { - .name = "GalileoGen2", - .func = 6, - .phy_addr = 1, - }, - { - .name = "SIMATIC IOT2000", - .asset_tag = "6ES7647-0AA00-0YA2", - .func = 6, - .phy_addr = 1, - }, - { - .name = "SIMATIC IOT2000", - .asset_tag = "6ES7647-0AA00-1YA2", - .func = 6, - .phy_addr = 1, - }, - { - .name = "SIMATIC IOT2000", - .asset_tag = "6ES7647-0AA00-1YA2", - .func = 7, - .phy_addr = 1, - }, - {} -}; - -static struct stmmac_pci_info quark_pci_info = { +static const struct stmmac_pci_info quark_pci_info = { .setup = quark_default_data, - .dmi = quark_pci_dmi_data, }; /** @@ -236,15 +276,9 @@ static int stmmac_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); - if (info) { - info->pdev = pdev; - if (info->setup) { - ret = info->setup(plat, info); - if (ret) - return ret; - } - } else - stmmac_default_data(plat); + ret = info->setup(pdev, plat); + if (ret) + return ret; pci_enable_msi(pdev); @@ -270,14 +304,21 @@ static void stmmac_pci_remove(struct pci_dev *pdev) static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_suspend, stmmac_resume); -#define STMMAC_VENDOR_ID 0x700 +/* synthetic ID, no official vendor */ +#define PCI_VENDOR_ID_STMMAC 0x700 + #define STMMAC_QUARK_ID 0x0937 #define STMMAC_DEVICE_ID 0x1108 +#define STMMAC_DEVICE(vendor_id, dev_id, info) { \ + PCI_VDEVICE(vendor_id, dev_id), \ + .driver_data = (kernel_ulong_t)&info \ + } + static const struct pci_device_id stmmac_id_table[] = { - {PCI_DEVICE(STMMAC_VENDOR_ID, STMMAC_DEVICE_ID)}, - {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_MAC)}, - {PCI_VDEVICE(INTEL, STMMAC_QUARK_ID), (kernel_ulong_t)&quark_pci_info}, + STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID, stmmac_pci_info), + STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC, stmmac_pci_info), + STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info), {} }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 7fc3a1ef395a..a366b3747eeb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -309,6 +309,13 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, struct device_node *np, struct device *dev) { bool mdio = true; + static const struct of_device_id need_mdio_ids[] = { + { .compatible = "snps,dwc-qos-ethernet-4.10" }, + { .compatible = "allwinner,sun8i-a83t-emac" }, + { .compatible = "allwinner,sun8i-h3-emac" }, + { .compatible = "allwinner,sun8i-v3s-emac" }, + { .compatible = "allwinner,sun50i-a64-emac" }, + }; /* If phy-handle property is passed from DT, use it as the PHY */ plat->phy_node = of_parse_phandle(np, "phy-handle", 0); @@ -325,8 +332,7 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, mdio = false; } - /* exception for dwmac-dwc-qos-eth glue logic */ - if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { + if (of_match_node(need_mdio_ids, np)) { plat->mdio_node = of_get_child_by_name(np, "mdio"); } else { /** |