diff options
Diffstat (limited to 'drivers/net/ethernet/sgi')
| -rw-r--r-- | drivers/net/ethernet/sgi/Kconfig | 36 | ||||
| -rw-r--r-- | drivers/net/ethernet/sgi/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/sgi/ioc3-eth.c | 1684 | ||||
| -rw-r--r-- | drivers/net/ethernet/sgi/meth.c | 855 | ||||
| -rw-r--r-- | drivers/net/ethernet/sgi/meth.h | 243 |
5 files changed, 2824 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig new file mode 100644 index 000000000000..c1c4bb868a3b --- /dev/null +++ b/drivers/net/ethernet/sgi/Kconfig @@ -0,0 +1,36 @@ +# +# SGI device configuration +# + +config NET_VENDOR_SGI + bool "SGI devices" + default y + depends on (PCI && SGI_IP27) || SGI_IP32 + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about SGI devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_SGI + +config SGI_IOC3_ETH + bool "SGI IOC3 Ethernet" + depends on PCI && SGI_IP27 + select CRC32 + select NET_CORE + select MII + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config SGI_O2MACE_ETH + tristate "SGI O2 MACE Fast Ethernet support" + depends on SGI_IP32=y + +endif # NET_VENDOR_SGI diff --git a/drivers/net/ethernet/sgi/Makefile b/drivers/net/ethernet/sgi/Makefile new file mode 100644 index 000000000000..e5bedd271e29 --- /dev/null +++ b/drivers/net/ethernet/sgi/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SGI device drivers. +# + +obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o +obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c new file mode 100644 index 000000000000..ac149d99f78f --- /dev/null +++ b/drivers/net/ethernet/sgi/ioc3-eth.c @@ -0,0 +1,1684 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Driver for SGI's IOC3 based Ethernet cards as found in the PCI card. + * + * Copyright (C) 1999, 2000, 01, 03, 06 Ralf Baechle + * Copyright (C) 1995, 1999, 2000, 2001 by Silicon Graphics, Inc. + * + * References: + * o IOC3 ASIC specification 4.51, 1996-04-18 + * o IEEE 802.3 specification, 2000 edition + * o DP38840A Specification, National Semiconductor, March 1997 + * + * To do: + * + * o Handle allocation failures in ioc3_alloc_skb() more gracefully. + * o Handle allocation failures in ioc3_init_rings(). + * o Use prefetching for large packets. What is a good lower limit for + * prefetching? + * o We're probably allocating a bit too much memory. + * o Use hardware checksums. + * o Convert to using a IOC3 meta driver. + * o Which PHYs might possibly be attached to the IOC3 in real live, + * which workarounds are required for them? Do we ever have Lucent's? + * o For the 2.5 branch kill the mii-tool ioctls. + */ + +#define IOC3_NAME "ioc3-eth" +#define IOC3_VERSION "2.6.3-4" + +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/udp.h> +#include <linux/dma-mapping.h> +#include <linux/gfp.h> + +#ifdef CONFIG_SERIAL_8250 +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> +#endif + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <net/ip.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/uaccess.h> +#include <asm/sn/types.h> +#include <asm/sn/ioc3.h> +#include <asm/pci/bridge.h> + +/* + * 64 RX buffers. This is tunable in the range of 16 <= x < 512. The + * value must be a power of two. + */ +#define RX_BUFFS 64 + +#define ETCSR_FD ((17<<ETCSR_IPGR2_SHIFT) | (11<<ETCSR_IPGR1_SHIFT) | 21) +#define ETCSR_HD ((21<<ETCSR_IPGR2_SHIFT) | (21<<ETCSR_IPGR1_SHIFT) | 21) + +/* Private per NIC data of the driver. */ +struct ioc3_private { + struct ioc3 *regs; + unsigned long *rxr; /* pointer to receiver ring */ + struct ioc3_etxd *txr; + struct sk_buff *rx_skbs[512]; + struct sk_buff *tx_skbs[128]; + int rx_ci; /* RX consumer index */ + int rx_pi; /* RX producer index */ + int tx_ci; /* TX consumer index */ + int tx_pi; /* TX producer index */ + int txqlen; + u32 emcr, ehar_h, ehar_l; + spinlock_t ioc3_lock; + struct mii_if_info mii; + + struct pci_dev *pdev; + + /* Members used by autonegotiation */ + struct timer_list ioc3_timer; +}; + +static inline struct net_device *priv_netdev(struct ioc3_private *dev) +{ + return (void *)dev - ((sizeof(struct net_device) + 31) & ~31); +} + +static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static void ioc3_set_multicast_list(struct net_device *dev); +static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev); +static void ioc3_timeout(struct net_device *dev); +static inline unsigned int ioc3_hash(const unsigned char *addr); +static inline void ioc3_stop(struct ioc3_private *ip); +static void ioc3_init(struct net_device *dev); + +static const char ioc3_str[] = "IOC3 Ethernet"; +static const struct ethtool_ops ioc3_ethtool_ops; + +/* We use this to acquire receive skb's that we can DMA directly into. */ + +#define IOC3_CACHELINE 128UL + +static inline unsigned long aligned_rx_skb_addr(unsigned long addr) +{ + return (~addr + 1) & (IOC3_CACHELINE - 1UL); +} + +static inline struct sk_buff * ioc3_alloc_skb(unsigned long length, + unsigned int gfp_mask) +{ + struct sk_buff *skb; + + skb = alloc_skb(length + IOC3_CACHELINE - 1, gfp_mask); + if (likely(skb)) { + int offset = aligned_rx_skb_addr((unsigned long) skb->data); + if (offset) + skb_reserve(skb, offset); + } + + return skb; +} + +static inline unsigned long ioc3_map(void *ptr, unsigned long vdev) +{ +#ifdef CONFIG_SGI_IP27 + vdev <<= 57; /* Shift to PCI64_ATTR_VIRTUAL */ + + return vdev | (0xaUL << PCI64_ATTR_TARG_SHFT) | PCI64_ATTR_PREF | + ((unsigned long)ptr & TO_PHYS_MASK); +#else + return virt_to_bus(ptr); +#endif +} + +/* BEWARE: The IOC3 documentation documents the size of rx buffers as + 1644 while it's actually 1664. This one was nasty to track down ... */ +#define RX_OFFSET 10 +#define RX_BUF_ALLOC_SIZE (1664 + RX_OFFSET + IOC3_CACHELINE) + +/* DMA barrier to separate cached and uncached accesses. */ +#define BARRIER() \ + __asm__("sync" ::: "memory") + + +#define IOC3_SIZE 0x100000 + +/* + * IOC3 is a big endian device + * + * Unorthodox but makes the users of these macros more readable - the pointer + * to the IOC3's memory mapped registers is expected as struct ioc3 * ioc3 + * in the environment. + */ +#define ioc3_r_mcr() be32_to_cpu(ioc3->mcr) +#define ioc3_w_mcr(v) do { ioc3->mcr = cpu_to_be32(v); } while (0) +#define ioc3_w_gpcr_s(v) do { ioc3->gpcr_s = cpu_to_be32(v); } while (0) +#define ioc3_r_emcr() be32_to_cpu(ioc3->emcr) +#define ioc3_w_emcr(v) do { ioc3->emcr = cpu_to_be32(v); } while (0) +#define ioc3_r_eisr() be32_to_cpu(ioc3->eisr) +#define ioc3_w_eisr(v) do { ioc3->eisr = cpu_to_be32(v); } while (0) +#define ioc3_r_eier() be32_to_cpu(ioc3->eier) +#define ioc3_w_eier(v) do { ioc3->eier = cpu_to_be32(v); } while (0) +#define ioc3_r_ercsr() be32_to_cpu(ioc3->ercsr) +#define ioc3_w_ercsr(v) do { ioc3->ercsr = cpu_to_be32(v); } while (0) +#define ioc3_r_erbr_h() be32_to_cpu(ioc3->erbr_h) +#define ioc3_w_erbr_h(v) do { ioc3->erbr_h = cpu_to_be32(v); } while (0) +#define ioc3_r_erbr_l() be32_to_cpu(ioc3->erbr_l) +#define ioc3_w_erbr_l(v) do { ioc3->erbr_l = cpu_to_be32(v); } while (0) +#define ioc3_r_erbar() be32_to_cpu(ioc3->erbar) +#define ioc3_w_erbar(v) do { ioc3->erbar = cpu_to_be32(v); } while (0) +#define ioc3_r_ercir() be32_to_cpu(ioc3->ercir) +#define ioc3_w_ercir(v) do { ioc3->ercir = cpu_to_be32(v); } while (0) +#define ioc3_r_erpir() be32_to_cpu(ioc3->erpir) +#define ioc3_w_erpir(v) do { ioc3->erpir = cpu_to_be32(v); } while (0) +#define ioc3_r_ertr() be32_to_cpu(ioc3->ertr) +#define ioc3_w_ertr(v) do { ioc3->ertr = cpu_to_be32(v); } while (0) +#define ioc3_r_etcsr() be32_to_cpu(ioc3->etcsr) +#define ioc3_w_etcsr(v) do { ioc3->etcsr = cpu_to_be32(v); } while (0) +#define ioc3_r_ersr() be32_to_cpu(ioc3->ersr) +#define ioc3_w_ersr(v) do { ioc3->ersr = cpu_to_be32(v); } while (0) +#define ioc3_r_etcdc() be32_to_cpu(ioc3->etcdc) +#define ioc3_w_etcdc(v) do { ioc3->etcdc = cpu_to_be32(v); } while (0) +#define ioc3_r_ebir() be32_to_cpu(ioc3->ebir) +#define ioc3_w_ebir(v) do { ioc3->ebir = cpu_to_be32(v); } while (0) +#define ioc3_r_etbr_h() be32_to_cpu(ioc3->etbr_h) +#define ioc3_w_etbr_h(v) do { ioc3->etbr_h = cpu_to_be32(v); } while (0) +#define ioc3_r_etbr_l() be32_to_cpu(ioc3->etbr_l) +#define ioc3_w_etbr_l(v) do { ioc3->etbr_l = cpu_to_be32(v); } while (0) +#define ioc3_r_etcir() be32_to_cpu(ioc3->etcir) +#define ioc3_w_etcir(v) do { ioc3->etcir = cpu_to_be32(v); } while (0) +#define ioc3_r_etpir() be32_to_cpu(ioc3->etpir) +#define ioc3_w_etpir(v) do { ioc3->etpir = cpu_to_be32(v); } while (0) +#define ioc3_r_emar_h() be32_to_cpu(ioc3->emar_h) +#define ioc3_w_emar_h(v) do { ioc3->emar_h = cpu_to_be32(v); } while (0) +#define ioc3_r_emar_l() be32_to_cpu(ioc3->emar_l) +#define ioc3_w_emar_l(v) do { ioc3->emar_l = cpu_to_be32(v); } while (0) +#define ioc3_r_ehar_h() be32_to_cpu(ioc3->ehar_h) +#define ioc3_w_ehar_h(v) do { ioc3->ehar_h = cpu_to_be32(v); } while (0) +#define ioc3_r_ehar_l() be32_to_cpu(ioc3->ehar_l) +#define ioc3_w_ehar_l(v) do { ioc3->ehar_l = cpu_to_be32(v); } while (0) +#define ioc3_r_micr() be32_to_cpu(ioc3->micr) +#define ioc3_w_micr(v) do { ioc3->micr = cpu_to_be32(v); } while (0) +#define ioc3_r_midr_r() be32_to_cpu(ioc3->midr_r) +#define ioc3_w_midr_r(v) do { ioc3->midr_r = cpu_to_be32(v); } while (0) +#define ioc3_r_midr_w() be32_to_cpu(ioc3->midr_w) +#define ioc3_w_midr_w(v) do { ioc3->midr_w = cpu_to_be32(v); } while (0) + +static inline u32 mcr_pack(u32 pulse, u32 sample) +{ + return (pulse << 10) | (sample << 2); +} + +static int nic_wait(struct ioc3 *ioc3) +{ + u32 mcr; + + do { + mcr = ioc3_r_mcr(); + } while (!(mcr & 2)); + + return mcr & 1; +} + +static int nic_reset(struct ioc3 *ioc3) +{ + int presence; + + ioc3_w_mcr(mcr_pack(500, 65)); + presence = nic_wait(ioc3); + + ioc3_w_mcr(mcr_pack(0, 500)); + nic_wait(ioc3); + + return presence; +} + +static inline int nic_read_bit(struct ioc3 *ioc3) +{ + int result; + + ioc3_w_mcr(mcr_pack(6, 13)); + result = nic_wait(ioc3); + ioc3_w_mcr(mcr_pack(0, 100)); + nic_wait(ioc3); + + return result; +} + +static inline void nic_write_bit(struct ioc3 *ioc3, int bit) +{ + if (bit) + ioc3_w_mcr(mcr_pack(6, 110)); + else + ioc3_w_mcr(mcr_pack(80, 30)); + + nic_wait(ioc3); +} + +/* + * Read a byte from an iButton device + */ +static u32 nic_read_byte(struct ioc3 *ioc3) +{ + u32 result = 0; + int i; + + for (i = 0; i < 8; i++) + result = (result >> 1) | (nic_read_bit(ioc3) << 7); + + return result; +} + +/* + * Write a byte to an iButton device + */ +static void nic_write_byte(struct ioc3 *ioc3, int byte) +{ + int i, bit; + + for (i = 8; i; i--) { + bit = byte & 1; + byte >>= 1; + + nic_write_bit(ioc3, bit); + } +} + +static u64 nic_find(struct ioc3 *ioc3, int *last) +{ + int a, b, index, disc; + u64 address = 0; + + nic_reset(ioc3); + /* Search ROM. */ + nic_write_byte(ioc3, 0xf0); + + /* Algorithm from ``Book of iButton Standards''. */ + for (index = 0, disc = 0; index < 64; index++) { + a = nic_read_bit(ioc3); + b = nic_read_bit(ioc3); + + if (a && b) { + printk("NIC search failed (not fatal).\n"); + *last = 0; + return 0; + } + + if (!a && !b) { + if (index == *last) { + address |= 1UL << index; + } else if (index > *last) { + address &= ~(1UL << index); + disc = index; + } else if ((address & (1UL << index)) == 0) + disc = index; + nic_write_bit(ioc3, address & (1UL << index)); + continue; + } else { + if (a) + address |= 1UL << index; + else + address &= ~(1UL << index); + nic_write_bit(ioc3, a); + continue; + } + } + + *last = disc; + + return address; +} + +static int nic_init(struct ioc3 *ioc3) +{ + const char *unknown = "unknown"; + const char *type = unknown; + u8 crc; + u8 serial[6]; + int save = 0, i; + + while (1) { + u64 reg; + reg = nic_find(ioc3, &save); + + switch (reg & 0xff) { + case 0x91: + type = "DS1981U"; + break; + default: + if (save == 0) { + /* Let the caller try again. */ + return -1; + } + continue; + } + + nic_reset(ioc3); + + /* Match ROM. */ + nic_write_byte(ioc3, 0x55); + for (i = 0; i < 8; i++) + nic_write_byte(ioc3, (reg >> (i << 3)) & 0xff); + + reg >>= 8; /* Shift out type. */ + for (i = 0; i < 6; i++) { + serial[i] = reg & 0xff; + reg >>= 8; + } + crc = reg & 0xff; + break; + } + + printk("Found %s NIC", type); + if (type != unknown) + printk (" registration number %pM, CRC %02x", serial, crc); + printk(".\n"); + + return 0; +} + +/* + * Read the NIC (Number-In-a-Can) device used to store the MAC address on + * SN0 / SN00 nodeboards and PCI cards. + */ +static void ioc3_get_eaddr_nic(struct ioc3_private *ip) +{ + struct ioc3 *ioc3 = ip->regs; + u8 nic[14]; + int tries = 2; /* There may be some problem with the battery? */ + int i; + + ioc3_w_gpcr_s(1 << 21); + + while (tries--) { + if (!nic_init(ioc3)) + break; + udelay(500); + } + + if (tries < 0) { + printk("Failed to read MAC address\n"); + return; + } + + /* Read Memory. */ + nic_write_byte(ioc3, 0xf0); + nic_write_byte(ioc3, 0x00); + nic_write_byte(ioc3, 0x00); + + for (i = 13; i >= 0; i--) + nic[i] = nic_read_byte(ioc3); + + for (i = 2; i < 8; i++) + priv_netdev(ip)->dev_addr[i - 2] = nic[i]; +} + +/* + * Ok, this is hosed by design. It's necessary to know what machine the + * NIC is in in order to know how to read the NIC address. We also have + * to know if it's a PCI card or a NIC in on the node board ... + */ +static void ioc3_get_eaddr(struct ioc3_private *ip) +{ + ioc3_get_eaddr_nic(ip); + + printk("Ethernet address is %pM.\n", priv_netdev(ip)->dev_addr); +} + +static void __ioc3_set_mac_address(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + + ioc3_w_emar_h((dev->dev_addr[5] << 8) | dev->dev_addr[4]); + ioc3_w_emar_l((dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | + (dev->dev_addr[1] << 8) | dev->dev_addr[0]); +} + +static int ioc3_set_mac_address(struct net_device *dev, void *addr) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct sockaddr *sa = addr; + + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + + spin_lock_irq(&ip->ioc3_lock); + __ioc3_set_mac_address(dev); + spin_unlock_irq(&ip->ioc3_lock); + + return 0; +} + +/* + * Caller must hold the ioc3_lock ever for MII readers. This is also + * used to protect the transmitter side but it's low contention. + */ +static int ioc3_mdio_read(struct net_device *dev, int phy, int reg) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + + while (ioc3_r_micr() & MICR_BUSY); + ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG); + while (ioc3_r_micr() & MICR_BUSY); + + return ioc3_r_midr_r() & MIDR_DATA_MASK; +} + +static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + + while (ioc3_r_micr() & MICR_BUSY); + ioc3_w_midr_w(data); + ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg); + while (ioc3_r_micr() & MICR_BUSY); +} + +static int ioc3_mii_init(struct ioc3_private *ip); + +static struct net_device_stats *ioc3_get_stats(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + + dev->stats.collisions += (ioc3_r_etcdc() & ETCDC_COLLCNT_MASK); + return &dev->stats; +} + +static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len) +{ + struct ethhdr *eh = eth_hdr(skb); + uint32_t csum, ehsum; + unsigned int proto; + struct iphdr *ih; + uint16_t *ew; + unsigned char *cp; + + /* + * Did hardware handle the checksum at all? The cases we can handle + * are: + * + * - TCP and UDP checksums of IPv4 only. + * - IPv6 would be doable but we keep that for later ... + * - Only unfragmented packets. Did somebody already tell you + * fragmentation is evil? + * - don't care about packet size. Worst case when processing a + * malformed packet we'll try to access the packet at ip header + + * 64 bytes which is still inside the skb. Even in the unlikely + * case where the checksum is right the higher layers will still + * drop the packet as appropriate. + */ + if (eh->h_proto != htons(ETH_P_IP)) + return; + + ih = (struct iphdr *) ((char *)eh + ETH_HLEN); + if (ip_is_fragment(ih)) + return; + + proto = ih->protocol; + if (proto != IPPROTO_TCP && proto != IPPROTO_UDP) + return; + + /* Same as tx - compute csum of pseudo header */ + csum = hwsum + + (ih->tot_len - (ih->ihl << 2)) + + htons((uint16_t)ih->protocol) + + (ih->saddr >> 16) + (ih->saddr & 0xffff) + + (ih->daddr >> 16) + (ih->daddr & 0xffff); + + /* Sum up ethernet dest addr, src addr and protocol */ + ew = (uint16_t *) eh; + ehsum = ew[0] + ew[1] + ew[2] + ew[3] + ew[4] + ew[5] + ew[6]; + + ehsum = (ehsum & 0xffff) + (ehsum >> 16); + ehsum = (ehsum & 0xffff) + (ehsum >> 16); + + csum += 0xffff ^ ehsum; + + /* In the next step we also subtract the 1's complement + checksum of the trailing ethernet CRC. */ + cp = (char *)eh + len; /* points at trailing CRC */ + if (len & 1) { + csum += 0xffff ^ (uint16_t) ((cp[1] << 8) | cp[0]); + csum += 0xffff ^ (uint16_t) ((cp[3] << 8) | cp[2]); + } else { + csum += 0xffff ^ (uint16_t) ((cp[0] << 8) | cp[1]); + csum += 0xffff ^ (uint16_t) ((cp[2] << 8) | cp[3]); + } + + csum = (csum & 0xffff) + (csum >> 16); + csum = (csum & 0xffff) + (csum >> 16); + + if (csum == 0xffff) + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +static inline void ioc3_rx(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct sk_buff *skb, *new_skb; + struct ioc3 *ioc3 = ip->regs; + int rx_entry, n_entry, len; + struct ioc3_erxbuf *rxb; + unsigned long *rxr; + u32 w0, err; + + rxr = (unsigned long *) ip->rxr; /* Ring base */ + rx_entry = ip->rx_ci; /* RX consume index */ + n_entry = ip->rx_pi; + + skb = ip->rx_skbs[rx_entry]; + rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET); + w0 = be32_to_cpu(rxb->w0); + + while (w0 & ERXBUF_V) { + err = be32_to_cpu(rxb->err); /* It's valid ... */ + if (err & ERXBUF_GOODPKT) { + len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4; + skb_trim(skb, len); + skb->protocol = eth_type_trans(skb, dev); + + new_skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC); + if (!new_skb) { + /* Ouch, drop packet and just recycle packet + to keep the ring filled. */ + dev->stats.rx_dropped++; + new_skb = skb; + goto next; + } + + if (likely(dev->features & NETIF_F_RXCSUM)) + ioc3_tcpudp_checksum(skb, + w0 & ERXBUF_IPCKSUM_MASK, len); + + netif_rx(skb); + + ip->rx_skbs[rx_entry] = NULL; /* Poison */ + + /* Because we reserve afterwards. */ + skb_put(new_skb, (1664 + RX_OFFSET)); + rxb = (struct ioc3_erxbuf *) new_skb->data; + skb_reserve(new_skb, RX_OFFSET); + + dev->stats.rx_packets++; /* Statistics */ + dev->stats.rx_bytes += len; + } else { + /* The frame is invalid and the skb never + reached the network layer so we can just + recycle it. */ + new_skb = skb; + dev->stats.rx_errors++; + } + if (err & ERXBUF_CRCERR) /* Statistics */ + dev->stats.rx_crc_errors++; + if (err & ERXBUF_FRAMERR) + dev->stats.rx_frame_errors++; +next: + ip->rx_skbs[n_entry] = new_skb; + rxr[n_entry] = cpu_to_be64(ioc3_map(rxb, 1)); + rxb->w0 = 0; /* Clear valid flag */ + n_entry = (n_entry + 1) & 511; /* Update erpir */ + + /* Now go on to the next ring entry. */ + rx_entry = (rx_entry + 1) & 511; + skb = ip->rx_skbs[rx_entry]; + rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET); + w0 = be32_to_cpu(rxb->w0); + } + ioc3_w_erpir((n_entry << 3) | ERPIR_ARM); + ip->rx_pi = n_entry; + ip->rx_ci = rx_entry; +} + +static inline void ioc3_tx(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + unsigned long packets, bytes; + struct ioc3 *ioc3 = ip->regs; + int tx_entry, o_entry; + struct sk_buff *skb; + u32 etcir; + + spin_lock(&ip->ioc3_lock); + etcir = ioc3_r_etcir(); + + tx_entry = (etcir >> 7) & 127; + o_entry = ip->tx_ci; + packets = 0; + bytes = 0; + + while (o_entry != tx_entry) { + packets++; + skb = ip->tx_skbs[o_entry]; + bytes += skb->len; + dev_kfree_skb_irq(skb); + ip->tx_skbs[o_entry] = NULL; + + o_entry = (o_entry + 1) & 127; /* Next */ + + etcir = ioc3_r_etcir(); /* More pkts sent? */ + tx_entry = (etcir >> 7) & 127; + } + + dev->stats.tx_packets += packets; + dev->stats.tx_bytes += bytes; + ip->txqlen -= packets; + + if (ip->txqlen < 128) + netif_wake_queue(dev); + + ip->tx_ci = o_entry; + spin_unlock(&ip->ioc3_lock); +} + +/* + * Deal with fatal IOC3 errors. This condition might be caused by a hard or + * software problems, so we should try to recover + * more gracefully if this ever happens. In theory we might be flooded + * with such error interrupts if something really goes wrong, so we might + * also consider to take the interface down. + */ +static void ioc3_error(struct net_device *dev, u32 eisr) +{ + struct ioc3_private *ip = netdev_priv(dev); + unsigned char *iface = dev->name; + + spin_lock(&ip->ioc3_lock); + + if (eisr & EISR_RXOFLO) + printk(KERN_ERR "%s: RX overflow.\n", iface); + if (eisr & EISR_RXBUFOFLO) + printk(KERN_ERR "%s: RX buffer overflow.\n", iface); + if (eisr & EISR_RXMEMERR) + printk(KERN_ERR "%s: RX PCI error.\n", iface); + if (eisr & EISR_RXPARERR) + printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface); + if (eisr & EISR_TXBUFUFLO) + printk(KERN_ERR "%s: TX buffer underflow.\n", iface); + if (eisr & EISR_TXMEMERR) + printk(KERN_ERR "%s: TX PCI error.\n", iface); + + ioc3_stop(ip); + ioc3_init(dev); + ioc3_mii_init(ip); + + netif_wake_queue(dev); + + spin_unlock(&ip->ioc3_lock); +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t ioc3_interrupt(int irq, void *_dev) +{ + struct net_device *dev = (struct net_device *)_dev; + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + const u32 enabled = EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO | + EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO | + EISR_TXEXPLICIT | EISR_TXMEMERR; + u32 eisr; + + eisr = ioc3_r_eisr() & enabled; + + ioc3_w_eisr(eisr); + (void) ioc3_r_eisr(); /* Flush */ + + if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO | EISR_RXMEMERR | + EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR)) + ioc3_error(dev, eisr); + if (eisr & EISR_RXTIMERINT) + ioc3_rx(dev); + if (eisr & EISR_TXEXPLICIT) + ioc3_tx(dev); + + return IRQ_HANDLED; +} + +static inline void ioc3_setup_duplex(struct ioc3_private *ip) +{ + struct ioc3 *ioc3 = ip->regs; + + if (ip->mii.full_duplex) { + ioc3_w_etcsr(ETCSR_FD); + ip->emcr |= EMCR_DUPLEX; + } else { + ioc3_w_etcsr(ETCSR_HD); + ip->emcr &= ~EMCR_DUPLEX; + } + ioc3_w_emcr(ip->emcr); +} + +static void ioc3_timer(unsigned long data) +{ + struct ioc3_private *ip = (struct ioc3_private *) data; + + /* Print the link status if it has changed */ + mii_check_media(&ip->mii, 1, 0); + ioc3_setup_duplex(ip); + + ip->ioc3_timer.expires = jiffies + ((12 * HZ)/10); /* 1.2s */ + add_timer(&ip->ioc3_timer); +} + +/* + * Try to find a PHY. There is no apparent relation between the MII addresses + * in the SGI documentation and what we find in reality, so we simply probe + * for the PHY. It seems IOC3 PHYs usually live on address 31. One of my + * onboard IOC3s has the special oddity that probing doesn't seem to find it + * yet the interface seems to work fine, so if probing fails we for now will + * simply default to PHY 31 instead of bailing out. + */ +static int ioc3_mii_init(struct ioc3_private *ip) +{ + struct net_device *dev = priv_netdev(ip); + int i, found = 0, res = 0; + int ioc3_phy_workaround = 1; + u16 word; + + for (i = 0; i < 32; i++) { + word = ioc3_mdio_read(dev, i, MII_PHYSID1); + + if (word != 0xffff && word != 0x0000) { + found = 1; + break; /* Found a PHY */ + } + } + + if (!found) { + if (ioc3_phy_workaround) + i = 31; + else { + ip->mii.phy_id = -1; + res = -ENODEV; + goto out; + } + } + + ip->mii.phy_id = i; + +out: + return res; +} + +static void ioc3_mii_start(struct ioc3_private *ip) +{ + ip->ioc3_timer.expires = jiffies + (12 * HZ)/10; /* 1.2 sec. */ + ip->ioc3_timer.data = (unsigned long) ip; + ip->ioc3_timer.function = ioc3_timer; + add_timer(&ip->ioc3_timer); +} + +static inline void ioc3_clean_rx_ring(struct ioc3_private *ip) +{ + struct sk_buff *skb; + int i; + + for (i = ip->rx_ci; i & 15; i++) { + ip->rx_skbs[ip->rx_pi] = ip->rx_skbs[ip->rx_ci]; + ip->rxr[ip->rx_pi++] = ip->rxr[ip->rx_ci++]; + } + ip->rx_pi &= 511; + ip->rx_ci &= 511; + + for (i = ip->rx_ci; i != ip->rx_pi; i = (i+1) & 511) { + struct ioc3_erxbuf *rxb; + skb = ip->rx_skbs[i]; + rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET); + rxb->w0 = 0; + } +} + +static inline void ioc3_clean_tx_ring(struct ioc3_private *ip) +{ + struct sk_buff *skb; + int i; + + for (i=0; i < 128; i++) { + skb = ip->tx_skbs[i]; + if (skb) { + ip->tx_skbs[i] = NULL; + dev_kfree_skb_any(skb); + } + ip->txr[i].cmd = 0; + } + ip->tx_pi = 0; + ip->tx_ci = 0; +} + +static void ioc3_free_rings(struct ioc3_private *ip) +{ + struct sk_buff *skb; + int rx_entry, n_entry; + + if (ip->txr) { + ioc3_clean_tx_ring(ip); + free_pages((unsigned long)ip->txr, 2); + ip->txr = NULL; + } + + if (ip->rxr) { + n_entry = ip->rx_ci; + rx_entry = ip->rx_pi; + + while (n_entry != rx_entry) { + skb = ip->rx_skbs[n_entry]; + if (skb) + dev_kfree_skb_any(skb); + + n_entry = (n_entry + 1) & 511; + } + free_page((unsigned long)ip->rxr); + ip->rxr = NULL; + } +} + +static void ioc3_alloc_rings(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3_erxbuf *rxb; + unsigned long *rxr; + int i; + + if (ip->rxr == NULL) { + /* Allocate and initialize rx ring. 4kb = 512 entries */ + ip->rxr = (unsigned long *) get_zeroed_page(GFP_ATOMIC); + rxr = (unsigned long *) ip->rxr; + if (!rxr) + printk("ioc3_alloc_rings(): get_zeroed_page() failed!\n"); + + /* Now the rx buffers. The RX ring may be larger but + we only allocate 16 buffers for now. Need to tune + this for performance and memory later. */ + for (i = 0; i < RX_BUFFS; i++) { + struct sk_buff *skb; + + skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC); + if (!skb) { + show_free_areas(0); + continue; + } + + ip->rx_skbs[i] = skb; + + /* Because we reserve afterwards. */ + skb_put(skb, (1664 + RX_OFFSET)); + rxb = (struct ioc3_erxbuf *) skb->data; + rxr[i] = cpu_to_be64(ioc3_map(rxb, 1)); + skb_reserve(skb, RX_OFFSET); + } + ip->rx_ci = 0; + ip->rx_pi = RX_BUFFS; + } + + if (ip->txr == NULL) { + /* Allocate and initialize tx rings. 16kb = 128 bufs. */ + ip->txr = (struct ioc3_etxd *)__get_free_pages(GFP_KERNEL, 2); + if (!ip->txr) + printk("ioc3_alloc_rings(): __get_free_pages() failed!\n"); + ip->tx_pi = 0; + ip->tx_ci = 0; + } +} + +static void ioc3_init_rings(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + unsigned long ring; + + ioc3_free_rings(ip); + ioc3_alloc_rings(dev); + + ioc3_clean_rx_ring(ip); + ioc3_clean_tx_ring(ip); + + /* Now the rx ring base, consume & produce registers. */ + ring = ioc3_map(ip->rxr, 0); + ioc3_w_erbr_h(ring >> 32); + ioc3_w_erbr_l(ring & 0xffffffff); + ioc3_w_ercir(ip->rx_ci << 3); + ioc3_w_erpir((ip->rx_pi << 3) | ERPIR_ARM); + + ring = ioc3_map(ip->txr, 0); + + ip->txqlen = 0; /* nothing queued */ + + /* Now the tx ring base, consume & produce registers. */ + ioc3_w_etbr_h(ring >> 32); + ioc3_w_etbr_l(ring & 0xffffffff); + ioc3_w_etpir(ip->tx_pi << 7); + ioc3_w_etcir(ip->tx_ci << 7); + (void) ioc3_r_etcir(); /* Flush */ +} + +static inline void ioc3_ssram_disc(struct ioc3_private *ip) +{ + struct ioc3 *ioc3 = ip->regs; + volatile u32 *ssram0 = &ioc3->ssram[0x0000]; + volatile u32 *ssram1 = &ioc3->ssram[0x4000]; + unsigned int pattern = 0x5555; + + /* Assume the larger size SSRAM and enable parity checking */ + ioc3_w_emcr(ioc3_r_emcr() | (EMCR_BUFSIZ | EMCR_RAMPAR)); + + *ssram0 = pattern; + *ssram1 = ~pattern & IOC3_SSRAM_DM; + + if ((*ssram0 & IOC3_SSRAM_DM) != pattern || + (*ssram1 & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) { + /* set ssram size to 64 KB */ + ip->emcr = EMCR_RAMPAR; + ioc3_w_emcr(ioc3_r_emcr() & ~EMCR_BUFSIZ); + } else + ip->emcr = EMCR_BUFSIZ | EMCR_RAMPAR; +} + +static void ioc3_init(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + + del_timer_sync(&ip->ioc3_timer); /* Kill if running */ + + ioc3_w_emcr(EMCR_RST); /* Reset */ + (void) ioc3_r_emcr(); /* Flush WB */ + udelay(4); /* Give it time ... */ + ioc3_w_emcr(0); + (void) ioc3_r_emcr(); + + /* Misc registers */ +#ifdef CONFIG_SGI_IP27 + ioc3_w_erbar(PCI64_ATTR_BAR >> 32); /* Barrier on last store */ +#else + ioc3_w_erbar(0); /* Let PCI API get it right */ +#endif + (void) ioc3_r_etcdc(); /* Clear on read */ + ioc3_w_ercsr(15); /* RX low watermark */ + ioc3_w_ertr(0); /* Interrupt immediately */ + __ioc3_set_mac_address(dev); + ioc3_w_ehar_h(ip->ehar_h); + ioc3_w_ehar_l(ip->ehar_l); + ioc3_w_ersr(42); /* XXX should be random */ + + ioc3_init_rings(dev); + + ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) | EMCR_TXDMAEN | + EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN; + ioc3_w_emcr(ip->emcr); + ioc3_w_eier(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO | + EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO | + EISR_TXEXPLICIT | EISR_TXMEMERR); + (void) ioc3_r_eier(); +} + +static inline void ioc3_stop(struct ioc3_private *ip) +{ + struct ioc3 *ioc3 = ip->regs; + + ioc3_w_emcr(0); /* Shutup */ + ioc3_w_eier(0); /* Disable interrupts */ + (void) ioc3_r_eier(); /* Flush */ +} + +static int ioc3_open(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + + if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) { + printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq); + + return -EAGAIN; + } + + ip->ehar_h = 0; + ip->ehar_l = 0; + ioc3_init(dev); + ioc3_mii_start(ip); + + netif_start_queue(dev); + return 0; +} + +static int ioc3_close(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + + del_timer_sync(&ip->ioc3_timer); + + netif_stop_queue(dev); + + ioc3_stop(ip); + free_irq(dev->irq, dev); + + ioc3_free_rings(ip); + return 0; +} + +/* + * MENET cards have four IOC3 chips, which are attached to two sets of + * PCI slot resources each: the primary connections are on slots + * 0..3 and the secondaries are on 4..7 + * + * All four ethernets are brought out to connectors; six serial ports + * (a pair from each of the first three IOC3s) are brought out to + * MiniDINs; all other subdevices are left swinging in the wind, leave + * them disabled. + */ + +static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot) +{ + struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0)); + int ret = 0; + + if (dev) { + if (dev->vendor == PCI_VENDOR_ID_SGI && + dev->device == PCI_DEVICE_ID_SGI_IOC3) + ret = 1; + pci_dev_put(dev); + } + + return ret; +} + +static int ioc3_is_menet(struct pci_dev *pdev) +{ + return pdev->bus->parent == NULL && + ioc3_adjacent_is_ioc3(pdev, 0) && + ioc3_adjacent_is_ioc3(pdev, 1) && + ioc3_adjacent_is_ioc3(pdev, 2); +} + +#ifdef CONFIG_SERIAL_8250 +/* + * Note about serial ports and consoles: + * For console output, everyone uses the IOC3 UARTA (offset 0x178) + * connected to the master node (look in ip27_setup_console() and + * ip27prom_console_write()). + * + * For serial (/dev/ttyS0 etc), we can not have hardcoded serial port + * addresses on a partitioned machine. Since we currently use the ioc3 + * serial ports, we use dynamic serial port discovery that the serial.c + * driver uses for pci/pnp ports (there is an entry for the SGI ioc3 + * boards in pci_boards[]). Unfortunately, UARTA's pio address is greater + * than UARTB's, although UARTA on o200s has traditionally been known as + * port 0. So, we just use one serial port from each ioc3 (since the + * serial driver adds addresses to get to higher ports). + * + * The first one to do a register_console becomes the preferred console + * (if there is no kernel command line console= directive). /dev/console + * (ie 5, 1) is then "aliased" into the device number returned by the + * "device" routine referred to in this console structure + * (ip27prom_console_dev). + * + * Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working + * around ioc3 oddities in this respect. + * + * The IOC3 serials use a 22MHz clock rate with an additional divider which + * can be programmed in the SCR register if the DLAB bit is set. + * + * Register to interrupt zero because we share the interrupt with + * the serial driver which we don't properly support yet. + * + * Can't use UPF_IOREMAP as the whole of IOC3 resources have already been + * registered. + */ +static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart) +{ +#define COSMISC_CONSTANT 6 + + struct uart_port port = { + .irq = 0, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = (22000000 << 1) / COSMISC_CONSTANT, + + .membase = (unsigned char __iomem *) uart, + .mapbase = (unsigned long) uart, + }; + unsigned char lcr; + + lcr = uart->iu_lcr; + uart->iu_lcr = lcr | UART_LCR_DLAB; + uart->iu_scr = COSMISC_CONSTANT, + uart->iu_lcr = lcr; + uart->iu_lcr; + serial8250_register_port(&port); +} + +static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3) +{ + /* + * We need to recognice and treat the fourth MENET serial as it + * does not have an SuperIO chip attached to it, therefore attempting + * to access it will result in bus errors. We call something an + * MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3 + * in it. This is paranoid but we want to avoid blowing up on a + * showhorn PCI box that happens to have 4 IOC3 cards in it so it's + * not paranoid enough ... + */ + if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3) + return; + + /* + * Switch IOC3 to PIO mode. It probably already was but let's be + * paranoid + */ + ioc3->gpcr_s = GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL; + ioc3->gpcr_s; + ioc3->gppr_6 = 0; + ioc3->gppr_6; + ioc3->gppr_7 = 0; + ioc3->gppr_7; + ioc3->sscr_a = ioc3->sscr_a & ~SSCR_DMA_EN; + ioc3->sscr_a; + ioc3->sscr_b = ioc3->sscr_b & ~SSCR_DMA_EN; + ioc3->sscr_b; + /* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */ + ioc3->sio_iec &= ~ (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | + SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | + SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | + SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR); + ioc3->sio_iec |= SIO_IR_SA_INT; + ioc3->sscr_a = 0; + ioc3->sio_iec &= ~ (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | + SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | + SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | + SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR); + ioc3->sio_iec |= SIO_IR_SB_INT; + ioc3->sscr_b = 0; + + ioc3_8250_register(&ioc3->sregs.uarta); + ioc3_8250_register(&ioc3->sregs.uartb); +} +#endif + +static const struct net_device_ops ioc3_netdev_ops = { + .ndo_open = ioc3_open, + .ndo_stop = ioc3_close, + .ndo_start_xmit = ioc3_start_xmit, + .ndo_tx_timeout = ioc3_timeout, + .ndo_get_stats = ioc3_get_stats, + .ndo_set_rx_mode = ioc3_set_multicast_list, + .ndo_do_ioctl = ioc3_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ioc3_set_mac_address, + .ndo_change_mtu = eth_change_mtu, +}; + +static int __devinit ioc3_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned int sw_physid1, sw_physid2; + struct net_device *dev = NULL; + struct ioc3_private *ip; + struct ioc3 *ioc3; + unsigned long ioc3_base, ioc3_size; + u32 vendor, model, rev; + int err, pci_using_dac; + + /* Configure DMA attributes. */ + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (!err) { + pci_using_dac = 1; + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err < 0) { + printk(KERN_ERR "%s: Unable to obtain 64 bit DMA " + "for consistent allocations\n", pci_name(pdev)); + goto out; + } + } else { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + printk(KERN_ERR "%s: No usable DMA configuration, " + "aborting.\n", pci_name(pdev)); + goto out; + } + pci_using_dac = 0; + } + + if (pci_enable_device(pdev)) + return -ENODEV; + + dev = alloc_etherdev(sizeof(struct ioc3_private)); + if (!dev) { + err = -ENOMEM; + goto out_disable; + } + + if (pci_using_dac) + dev->features |= NETIF_F_HIGHDMA; + + err = pci_request_regions(pdev, "ioc3"); + if (err) + goto out_free; + + SET_NETDEV_DEV(dev, &pdev->dev); + + ip = netdev_priv(dev); + + dev->irq = pdev->irq; + + ioc3_base = pci_resource_start(pdev, 0); + ioc3_size = pci_resource_len(pdev, 0); + ioc3 = (struct ioc3 *) ioremap(ioc3_base, ioc3_size); + if (!ioc3) { + printk(KERN_CRIT "ioc3eth(%s): ioremap failed, goodbye.\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_res; + } + ip->regs = ioc3; + +#ifdef CONFIG_SERIAL_8250 + ioc3_serial_probe(pdev, ioc3); +#endif + + spin_lock_init(&ip->ioc3_lock); + init_timer(&ip->ioc3_timer); + + ioc3_stop(ip); + ioc3_init(dev); + + ip->pdev = pdev; + + ip->mii.phy_id_mask = 0x1f; + ip->mii.reg_num_mask = 0x1f; + ip->mii.dev = dev; + ip->mii.mdio_read = ioc3_mdio_read; + ip->mii.mdio_write = ioc3_mdio_write; + + ioc3_mii_init(ip); + + if (ip->mii.phy_id == -1) { + printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n", + pci_name(pdev)); + err = -ENODEV; + goto out_stop; + } + + ioc3_mii_start(ip); + ioc3_ssram_disc(ip); + ioc3_get_eaddr(ip); + + /* The IOC3-specific entries in the device structure. */ + dev->watchdog_timeo = 5 * HZ; + dev->netdev_ops = &ioc3_netdev_ops; + dev->ethtool_ops = &ioc3_ethtool_ops; + dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM; + dev->features = NETIF_F_IP_CSUM; + + sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1); + sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2); + + err = register_netdev(dev); + if (err) + goto out_stop; + + mii_check_media(&ip->mii, 1, 1); + ioc3_setup_duplex(ip); + + vendor = (sw_physid1 << 12) | (sw_physid2 >> 4); + model = (sw_physid2 >> 4) & 0x3f; + rev = sw_physid2 & 0xf; + printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, " + "rev %d.\n", dev->name, ip->mii.phy_id, vendor, model, rev); + printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name, + ip->emcr & EMCR_BUFSIZ ? 128 : 64); + + return 0; + +out_stop: + ioc3_stop(ip); + del_timer_sync(&ip->ioc3_timer); + ioc3_free_rings(ip); +out_res: + pci_release_regions(pdev); +out_free: + free_netdev(dev); +out_disable: + /* + * We should call pci_disable_device(pdev); here if the IOC3 wasn't + * such a weird device ... + */ +out: + return err; +} + +static void __devexit ioc3_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + + unregister_netdev(dev); + del_timer_sync(&ip->ioc3_timer); + + iounmap(ioc3); + pci_release_regions(pdev); + free_netdev(dev); + /* + * We should call pci_disable_device(pdev); here if the IOC3 wasn't + * such a weird device ... + */ +} + +static DEFINE_PCI_DEVICE_TABLE(ioc3_pci_tbl) = { + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl); + +static struct pci_driver ioc3_driver = { + .name = "ioc3-eth", + .id_table = ioc3_pci_tbl, + .probe = ioc3_probe, + .remove = __devexit_p(ioc3_remove_one), +}; + +static int __init ioc3_init_module(void) +{ + return pci_register_driver(&ioc3_driver); +} + +static void __exit ioc3_cleanup_module(void) +{ + pci_unregister_driver(&ioc3_driver); +} + +static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long data; + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + unsigned int len; + struct ioc3_etxd *desc; + uint32_t w0 = 0; + int produce; + + /* + * IOC3 has a fairly simple minded checksumming hardware which simply + * adds up the 1's complement checksum for the entire packet and + * inserts it at an offset which can be specified in the descriptor + * into the transmit packet. This means we have to compensate for the + * MAC header which should not be summed and the TCP/UDP pseudo headers + * manually. + */ + if (skb->ip_summed == CHECKSUM_PARTIAL) { + const struct iphdr *ih = ip_hdr(skb); + const int proto = ntohs(ih->protocol); + unsigned int csoff; + uint32_t csum, ehsum; + uint16_t *eh; + + /* The MAC header. skb->mac seem the logic approach + to find the MAC header - except it's a NULL pointer ... */ + eh = (uint16_t *) skb->data; + + /* Sum up dest addr, src addr and protocol */ + ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6]; + + /* Fold ehsum. can't use csum_fold which negates also ... */ + ehsum = (ehsum & 0xffff) + (ehsum >> 16); + ehsum = (ehsum & 0xffff) + (ehsum >> 16); + + /* Skip IP header; it's sum is always zero and was + already filled in by ip_output.c */ + csum = csum_tcpudp_nofold(ih->saddr, ih->daddr, + ih->tot_len - (ih->ihl << 2), + proto, 0xffff ^ ehsum); + + csum = (csum & 0xffff) + (csum >> 16); /* Fold again */ + csum = (csum & 0xffff) + (csum >> 16); + + csoff = ETH_HLEN + (ih->ihl << 2); + if (proto == IPPROTO_UDP) { + csoff += offsetof(struct udphdr, check); + udp_hdr(skb)->check = csum; + } + if (proto == IPPROTO_TCP) { + csoff += offsetof(struct tcphdr, check); + tcp_hdr(skb)->check = csum; + } + + w0 = ETXD_DOCHECKSUM | (csoff << ETXD_CHKOFF_SHIFT); + } + + spin_lock_irq(&ip->ioc3_lock); + + data = (unsigned long) skb->data; + len = skb->len; + + produce = ip->tx_pi; + desc = &ip->txr[produce]; + + if (len <= 104) { + /* Short packet, let's copy it directly into the ring. */ + skb_copy_from_linear_data(skb, desc->data, skb->len); + if (len < ETH_ZLEN) { + /* Very short packet, pad with zeros at the end. */ + memset(desc->data + len, 0, ETH_ZLEN - len); + len = ETH_ZLEN; + } + desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_D0V | w0); + desc->bufcnt = cpu_to_be32(len); + } else if ((data ^ (data + len - 1)) & 0x4000) { + unsigned long b2 = (data | 0x3fffUL) + 1UL; + unsigned long s1 = b2 - data; + unsigned long s2 = data + len - b2; + + desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | + ETXD_B1V | ETXD_B2V | w0); + desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) | + (s2 << ETXD_B2CNT_SHIFT)); + desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1)); + desc->p2 = cpu_to_be64(ioc3_map((void *) b2, 1)); + } else { + /* Normal sized packet that doesn't cross a page boundary. */ + desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0); + desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT); + desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1)); + } + + BARRIER(); + + ip->tx_skbs[produce] = skb; /* Remember skb */ + produce = (produce + 1) & 127; + ip->tx_pi = produce; + ioc3_w_etpir(produce << 7); /* Fire ... */ + + ip->txqlen++; + + if (ip->txqlen >= 127) + netif_stop_queue(dev); + + spin_unlock_irq(&ip->ioc3_lock); + + return NETDEV_TX_OK; +} + +static void ioc3_timeout(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + + printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name); + + spin_lock_irq(&ip->ioc3_lock); + + ioc3_stop(ip); + ioc3_init(dev); + ioc3_mii_init(ip); + ioc3_mii_start(ip); + + spin_unlock_irq(&ip->ioc3_lock); + + netif_wake_queue(dev); +} + +/* + * Given a multicast ethernet address, this routine calculates the + * address's bit index in the logical address filter mask + */ + +static inline unsigned int ioc3_hash(const unsigned char *addr) +{ + unsigned int temp = 0; + u32 crc; + int bits; + + crc = ether_crc_le(ETH_ALEN, addr); + + crc &= 0x3f; /* bit reverse lowest 6 bits for hash index */ + for (bits = 6; --bits >= 0; ) { + temp <<= 1; + temp |= (crc & 0x1); + crc >>= 1; + } + + return temp; +} + +static void ioc3_get_drvinfo (struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ioc3_private *ip = netdev_priv(dev); + + strcpy (info->driver, IOC3_NAME); + strcpy (info->version, IOC3_VERSION); + strcpy (info->bus_info, pci_name(ip->pdev)); +} + +static int ioc3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ioc3_private *ip = netdev_priv(dev); + int rc; + + spin_lock_irq(&ip->ioc3_lock); + rc = mii_ethtool_gset(&ip->mii, cmd); + spin_unlock_irq(&ip->ioc3_lock); + + return rc; +} + +static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ioc3_private *ip = netdev_priv(dev); + int rc; + + spin_lock_irq(&ip->ioc3_lock); + rc = mii_ethtool_sset(&ip->mii, cmd); + spin_unlock_irq(&ip->ioc3_lock); + + return rc; +} + +static int ioc3_nway_reset(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + int rc; + + spin_lock_irq(&ip->ioc3_lock); + rc = mii_nway_restart(&ip->mii); + spin_unlock_irq(&ip->ioc3_lock); + + return rc; +} + +static u32 ioc3_get_link(struct net_device *dev) +{ + struct ioc3_private *ip = netdev_priv(dev); + int rc; + + spin_lock_irq(&ip->ioc3_lock); + rc = mii_link_ok(&ip->mii); + spin_unlock_irq(&ip->ioc3_lock); + + return rc; +} + +static const struct ethtool_ops ioc3_ethtool_ops = { + .get_drvinfo = ioc3_get_drvinfo, + .get_settings = ioc3_get_settings, + .set_settings = ioc3_set_settings, + .nway_reset = ioc3_nway_reset, + .get_link = ioc3_get_link, +}; + +static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct ioc3_private *ip = netdev_priv(dev); + int rc; + + spin_lock_irq(&ip->ioc3_lock); + rc = generic_mii_ioctl(&ip->mii, if_mii(rq), cmd, NULL); + spin_unlock_irq(&ip->ioc3_lock); + + return rc; +} + +static void ioc3_set_multicast_list(struct net_device *dev) +{ + struct netdev_hw_addr *ha; + struct ioc3_private *ip = netdev_priv(dev); + struct ioc3 *ioc3 = ip->regs; + u64 ehar = 0; + + netif_stop_queue(dev); /* Lock out others. */ + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + ip->emcr |= EMCR_PROMISC; + ioc3_w_emcr(ip->emcr); + (void) ioc3_r_emcr(); + } else { + ip->emcr &= ~EMCR_PROMISC; + ioc3_w_emcr(ip->emcr); /* Clear promiscuous. */ + (void) ioc3_r_emcr(); + + if ((dev->flags & IFF_ALLMULTI) || + (netdev_mc_count(dev) > 64)) { + /* Too many for hashing to make sense or we want all + multicast packets anyway, so skip computing all the + hashes and just accept all packets. */ + ip->ehar_h = 0xffffffff; + ip->ehar_l = 0xffffffff; + } else { + netdev_for_each_mc_addr(ha, dev) { + ehar |= (1UL << ioc3_hash(ha->addr)); + } + ip->ehar_h = ehar >> 32; + ip->ehar_l = ehar & 0xffffffff; + } + ioc3_w_ehar_h(ip->ehar_h); + ioc3_w_ehar_l(ip->ehar_l); + } + + netif_wake_queue(dev); /* Let us get going again. */ +} + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_DESCRIPTION("SGI IOC3 Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_init(ioc3_init_module); +module_exit(ioc3_cleanup_module); diff --git a/drivers/net/ethernet/sgi/meth.c b/drivers/net/ethernet/sgi/meth.c new file mode 100644 index 000000000000..60135aa55802 --- /dev/null +++ b/drivers/net/ethernet/sgi/meth.c @@ -0,0 +1,855 @@ +/* + * meth.c -- O2 Builtin 10/100 Ethernet driver + * + * Copyright (C) 2001-2003 Ilya Volynets + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/interrupt.h> + +#include <linux/in.h> +#include <linux/in6.h> +#include <linux/device.h> /* struct device, et al */ +#include <linux/netdevice.h> /* struct device, and other headers */ +#include <linux/etherdevice.h> /* eth_type_trans */ +#include <linux/ip.h> /* struct iphdr */ +#include <linux/tcp.h> /* struct tcphdr */ +#include <linux/skbuff.h> +#include <linux/mii.h> /* MII definitions */ + +#include <asm/ip32/mace.h> +#include <asm/ip32/ip32_ints.h> + +#include <asm/io.h> + +#include "meth.h" + +#ifndef MFE_DEBUG +#define MFE_DEBUG 0 +#endif + +#if MFE_DEBUG>=1 +#define DPRINTK(str,args...) printk(KERN_DEBUG "meth: %s: " str, __func__ , ## args) +#define MFE_RX_DEBUG 2 +#else +#define DPRINTK(str,args...) +#define MFE_RX_DEBUG 0 +#endif + + +static const char *meth_str="SGI O2 Fast Ethernet"; + +/* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */ +#define TX_TIMEOUT (400*HZ/1000) + +static int timeout = TX_TIMEOUT; +module_param(timeout, int, 0); + +/* + * This structure is private to each device. It is used to pass + * packets in and out, so there is place for a packet + */ +struct meth_private { + /* in-memory copy of MAC Control register */ + unsigned long mac_ctrl; + /* in-memory copy of DMA Control register */ + unsigned long dma_ctrl; + /* address of PHY, used by mdio_* functions, initialized in mdio_probe */ + unsigned long phy_addr; + tx_packet *tx_ring; + dma_addr_t tx_ring_dma; + struct sk_buff *tx_skbs[TX_RING_ENTRIES]; + dma_addr_t tx_skb_dmas[TX_RING_ENTRIES]; + unsigned long tx_read, tx_write, tx_count; + + rx_packet *rx_ring[RX_RING_ENTRIES]; + dma_addr_t rx_ring_dmas[RX_RING_ENTRIES]; + struct sk_buff *rx_skbs[RX_RING_ENTRIES]; + unsigned long rx_write; + + spinlock_t meth_lock; +}; + +static void meth_tx_timeout(struct net_device *dev); +static irqreturn_t meth_interrupt(int irq, void *dev_id); + +/* global, initialized in ip32-setup.c */ +char o2meth_eaddr[8]={0,0,0,0,0,0,0,0}; + +static inline void load_eaddr(struct net_device *dev) +{ + int i; + u64 macaddr; + + DPRINTK("Loading MAC Address: %pM\n", dev->dev_addr); + macaddr = 0; + for (i = 0; i < 6; i++) + macaddr |= (u64)dev->dev_addr[i] << ((5 - i) * 8); + + mace->eth.mac_addr = macaddr; +} + +/* + * Waits for BUSY status of mdio bus to clear + */ +#define WAIT_FOR_PHY(___rval) \ + while ((___rval = mace->eth.phy_data) & MDIO_BUSY) { \ + udelay(25); \ + } +/*read phy register, return value read */ +static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg) +{ + unsigned long rval; + WAIT_FOR_PHY(rval); + mace->eth.phy_regs = (priv->phy_addr << 5) | (phyreg & 0x1f); + udelay(25); + mace->eth.phy_trans_go = 1; + udelay(25); + WAIT_FOR_PHY(rval); + return rval & MDIO_DATA_MASK; +} + +static int mdio_probe(struct meth_private *priv) +{ + int i; + unsigned long p2, p3, flags; + /* check if phy is detected already */ + if(priv->phy_addr>=0&&priv->phy_addr<32) + return 0; + spin_lock_irqsave(&priv->meth_lock, flags); + for (i=0;i<32;++i){ + priv->phy_addr=i; + p2=mdio_read(priv,2); + p3=mdio_read(priv,3); +#if MFE_DEBUG>=2 + switch ((p2<<12)|(p3>>4)){ + case PHY_QS6612X: + DPRINTK("PHY is QS6612X\n"); + break; + case PHY_ICS1889: + DPRINTK("PHY is ICS1889\n"); + break; + case PHY_ICS1890: + DPRINTK("PHY is ICS1890\n"); + break; + case PHY_DP83840: + DPRINTK("PHY is DP83840\n"); + break; + } +#endif + if(p2!=0xffff&&p2!=0x0000){ + DPRINTK("PHY code: %x\n",(p2<<12)|(p3>>4)); + break; + } + } + spin_unlock_irqrestore(&priv->meth_lock, flags); + if(priv->phy_addr<32) { + return 0; + } + DPRINTK("Oopsie! PHY is not known!\n"); + priv->phy_addr=-1; + return -ENODEV; +} + +static void meth_check_link(struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + unsigned long mii_advertising = mdio_read(priv, 4); + unsigned long mii_partner = mdio_read(priv, 5); + unsigned long negotiated = mii_advertising & mii_partner; + unsigned long duplex, speed; + + if (mii_partner == 0xffff) + return; + + speed = (negotiated & 0x0380) ? METH_100MBIT : 0; + duplex = ((negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040) ? + METH_PHY_FDX : 0; + + if ((priv->mac_ctrl & METH_PHY_FDX) ^ duplex) { + DPRINTK("Setting %s-duplex\n", duplex ? "full" : "half"); + if (duplex) + priv->mac_ctrl |= METH_PHY_FDX; + else + priv->mac_ctrl &= ~METH_PHY_FDX; + mace->eth.mac_ctrl = priv->mac_ctrl; + } + + if ((priv->mac_ctrl & METH_100MBIT) ^ speed) { + DPRINTK("Setting %dMbs mode\n", speed ? 100 : 10); + if (duplex) + priv->mac_ctrl |= METH_100MBIT; + else + priv->mac_ctrl &= ~METH_100MBIT; + mace->eth.mac_ctrl = priv->mac_ctrl; + } +} + + +static int meth_init_tx_ring(struct meth_private *priv) +{ + /* Init TX ring */ + priv->tx_ring = dma_alloc_coherent(NULL, TX_RING_BUFFER_SIZE, + &priv->tx_ring_dma, GFP_ATOMIC); + if (!priv->tx_ring) + return -ENOMEM; + memset(priv->tx_ring, 0, TX_RING_BUFFER_SIZE); + priv->tx_count = priv->tx_read = priv->tx_write = 0; + mace->eth.tx_ring_base = priv->tx_ring_dma; + /* Now init skb save area */ + memset(priv->tx_skbs, 0, sizeof(priv->tx_skbs)); + memset(priv->tx_skb_dmas, 0, sizeof(priv->tx_skb_dmas)); + return 0; +} + +static int meth_init_rx_ring(struct meth_private *priv) +{ + int i; + + for (i = 0; i < RX_RING_ENTRIES; i++) { + priv->rx_skbs[i] = alloc_skb(METH_RX_BUFF_SIZE, 0); + /* 8byte status vector + 3quad padding + 2byte padding, + * to put data on 64bit aligned boundary */ + skb_reserve(priv->rx_skbs[i],METH_RX_HEAD); + priv->rx_ring[i]=(rx_packet*)(priv->rx_skbs[i]->head); + /* I'll need to re-sync it after each RX */ + priv->rx_ring_dmas[i] = + dma_map_single(NULL, priv->rx_ring[i], + METH_RX_BUFF_SIZE, DMA_FROM_DEVICE); + mace->eth.rx_fifo = priv->rx_ring_dmas[i]; + } + priv->rx_write = 0; + return 0; +} +static void meth_free_tx_ring(struct meth_private *priv) +{ + int i; + + /* Remove any pending skb */ + for (i = 0; i < TX_RING_ENTRIES; i++) { + if (priv->tx_skbs[i]) + dev_kfree_skb(priv->tx_skbs[i]); + priv->tx_skbs[i] = NULL; + } + dma_free_coherent(NULL, TX_RING_BUFFER_SIZE, priv->tx_ring, + priv->tx_ring_dma); +} + +/* Presumes RX DMA engine is stopped, and RX fifo ring is reset */ +static void meth_free_rx_ring(struct meth_private *priv) +{ + int i; + + for (i = 0; i < RX_RING_ENTRIES; i++) { + dma_unmap_single(NULL, priv->rx_ring_dmas[i], + METH_RX_BUFF_SIZE, DMA_FROM_DEVICE); + priv->rx_ring[i] = 0; + priv->rx_ring_dmas[i] = 0; + kfree_skb(priv->rx_skbs[i]); + } +} + +int meth_reset(struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + + /* Reset card */ + mace->eth.mac_ctrl = SGI_MAC_RESET; + udelay(1); + mace->eth.mac_ctrl = 0; + udelay(25); + + /* Load ethernet address */ + load_eaddr(dev); + /* Should load some "errata", but later */ + + /* Check for device */ + if (mdio_probe(priv) < 0) { + DPRINTK("Unable to find PHY\n"); + return -ENODEV; + } + + /* Initial mode: 10 | Half-duplex | Accept normal packets */ + priv->mac_ctrl = METH_ACCEPT_MCAST | METH_DEFAULT_IPG; + if (dev->flags & IFF_PROMISC) + priv->mac_ctrl |= METH_PROMISC; + mace->eth.mac_ctrl = priv->mac_ctrl; + + /* Autonegotiate speed and duplex mode */ + meth_check_link(dev); + + /* Now set dma control, but don't enable DMA, yet */ + priv->dma_ctrl = (4 << METH_RX_OFFSET_SHIFT) | + (RX_RING_ENTRIES << METH_RX_DEPTH_SHIFT); + mace->eth.dma_ctrl = priv->dma_ctrl; + + return 0; +} + +/*============End Helper Routines=====================*/ + +/* + * Open and close + */ +static int meth_open(struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + int ret; + + priv->phy_addr = -1; /* No PHY is known yet... */ + + /* Initialize the hardware */ + ret = meth_reset(dev); + if (ret < 0) + return ret; + + /* Allocate the ring buffers */ + ret = meth_init_tx_ring(priv); + if (ret < 0) + return ret; + ret = meth_init_rx_ring(priv); + if (ret < 0) + goto out_free_tx_ring; + + ret = request_irq(dev->irq, meth_interrupt, 0, meth_str, dev); + if (ret) { + printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq); + goto out_free_rx_ring; + } + + /* Start DMA */ + priv->dma_ctrl |= METH_DMA_TX_EN | /*METH_DMA_TX_INT_EN |*/ + METH_DMA_RX_EN | METH_DMA_RX_INT_EN; + mace->eth.dma_ctrl = priv->dma_ctrl; + + DPRINTK("About to start queue\n"); + netif_start_queue(dev); + + return 0; + +out_free_rx_ring: + meth_free_rx_ring(priv); +out_free_tx_ring: + meth_free_tx_ring(priv); + + return ret; +} + +static int meth_release(struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + + DPRINTK("Stopping queue\n"); + netif_stop_queue(dev); /* can't transmit any more */ + /* shut down DMA */ + priv->dma_ctrl &= ~(METH_DMA_TX_EN | METH_DMA_TX_INT_EN | + METH_DMA_RX_EN | METH_DMA_RX_INT_EN); + mace->eth.dma_ctrl = priv->dma_ctrl; + free_irq(dev->irq, dev); + meth_free_tx_ring(priv); + meth_free_rx_ring(priv); + + return 0; +} + +/* + * Receive a packet: retrieve, encapsulate and pass over to upper levels + */ +static void meth_rx(struct net_device* dev, unsigned long int_status) +{ + struct sk_buff *skb; + unsigned long status, flags; + struct meth_private *priv = netdev_priv(dev); + unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8; + + spin_lock_irqsave(&priv->meth_lock, flags); + priv->dma_ctrl &= ~METH_DMA_RX_INT_EN; + mace->eth.dma_ctrl = priv->dma_ctrl; + spin_unlock_irqrestore(&priv->meth_lock, flags); + + if (int_status & METH_INT_RX_UNDERFLOW) { + fifo_rptr = (fifo_rptr - 1) & 0x0f; + } + while (priv->rx_write != fifo_rptr) { + dma_unmap_single(NULL, priv->rx_ring_dmas[priv->rx_write], + METH_RX_BUFF_SIZE, DMA_FROM_DEVICE); + status = priv->rx_ring[priv->rx_write]->status.raw; +#if MFE_DEBUG + if (!(status & METH_RX_ST_VALID)) { + DPRINTK("Not received? status=%016lx\n",status); + } +#endif + if ((!(status & METH_RX_STATUS_ERRORS)) && (status & METH_RX_ST_VALID)) { + int len = (status & 0xffff) - 4; /* omit CRC */ + /* length sanity check */ + if (len < 60 || len > 1518) { + printk(KERN_DEBUG "%s: bogus packet size: %ld, status=%#2Lx.\n", + dev->name, priv->rx_write, + priv->rx_ring[priv->rx_write]->status.raw); + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; + skb = priv->rx_skbs[priv->rx_write]; + } else { + skb = alloc_skb(METH_RX_BUFF_SIZE, GFP_ATOMIC); + if (!skb) { + /* Ouch! No memory! Drop packet on the floor */ + DPRINTK("No mem: dropping packet\n"); + dev->stats.rx_dropped++; + skb = priv->rx_skbs[priv->rx_write]; + } else { + struct sk_buff *skb_c = priv->rx_skbs[priv->rx_write]; + /* 8byte status vector + 3quad padding + 2byte padding, + * to put data on 64bit aligned boundary */ + skb_reserve(skb, METH_RX_HEAD); + /* Write metadata, and then pass to the receive level */ + skb_put(skb_c, len); + priv->rx_skbs[priv->rx_write] = skb; + skb_c->protocol = eth_type_trans(skb_c, dev); + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; + netif_rx(skb_c); + } + } + } else { + dev->stats.rx_errors++; + skb=priv->rx_skbs[priv->rx_write]; +#if MFE_DEBUG>0 + printk(KERN_WARNING "meth: RX error: status=0x%016lx\n",status); + if(status&METH_RX_ST_RCV_CODE_VIOLATION) + printk(KERN_WARNING "Receive Code Violation\n"); + if(status&METH_RX_ST_CRC_ERR) + printk(KERN_WARNING "CRC error\n"); + if(status&METH_RX_ST_INV_PREAMBLE_CTX) + printk(KERN_WARNING "Invalid Preamble Context\n"); + if(status&METH_RX_ST_LONG_EVT_SEEN) + printk(KERN_WARNING "Long Event Seen...\n"); + if(status&METH_RX_ST_BAD_PACKET) + printk(KERN_WARNING "Bad Packet\n"); + if(status&METH_RX_ST_CARRIER_EVT_SEEN) + printk(KERN_WARNING "Carrier Event Seen\n"); +#endif + } + priv->rx_ring[priv->rx_write] = (rx_packet*)skb->head; + priv->rx_ring[priv->rx_write]->status.raw = 0; + priv->rx_ring_dmas[priv->rx_write] = + dma_map_single(NULL, priv->rx_ring[priv->rx_write], + METH_RX_BUFF_SIZE, DMA_FROM_DEVICE); + mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write]; + ADVANCE_RX_PTR(priv->rx_write); + } + spin_lock_irqsave(&priv->meth_lock, flags); + /* In case there was underflow, and Rx DMA was disabled */ + priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN; + mace->eth.dma_ctrl = priv->dma_ctrl; + mace->eth.int_stat = METH_INT_RX_THRESHOLD; + spin_unlock_irqrestore(&priv->meth_lock, flags); +} + +static int meth_tx_full(struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + + return priv->tx_count >= TX_RING_ENTRIES - 1; +} + +static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) +{ + struct meth_private *priv = netdev_priv(dev); + unsigned long status, flags; + struct sk_buff *skb; + unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16; + + spin_lock_irqsave(&priv->meth_lock, flags); + + /* Stop DMA notification */ + priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN); + mace->eth.dma_ctrl = priv->dma_ctrl; + + while (priv->tx_read != rptr) { + skb = priv->tx_skbs[priv->tx_read]; + status = priv->tx_ring[priv->tx_read].header.raw; +#if MFE_DEBUG>=1 + if (priv->tx_read == priv->tx_write) + DPRINTK("Auchi! tx_read=%d,tx_write=%d,rptr=%d?\n", priv->tx_read, priv->tx_write,rptr); +#endif + if (status & METH_TX_ST_DONE) { + if (status & METH_TX_ST_SUCCESS){ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + } else { + dev->stats.tx_errors++; +#if MFE_DEBUG>=1 + DPRINTK("TX error: status=%016lx <",status); + if(status & METH_TX_ST_SUCCESS) + printk(" SUCCESS"); + if(status & METH_TX_ST_TOOLONG) + printk(" TOOLONG"); + if(status & METH_TX_ST_UNDERRUN) + printk(" UNDERRUN"); + if(status & METH_TX_ST_EXCCOLL) + printk(" EXCCOLL"); + if(status & METH_TX_ST_DEFER) + printk(" DEFER"); + if(status & METH_TX_ST_LATECOLL) + printk(" LATECOLL"); + printk(" >\n"); +#endif + } + } else { + DPRINTK("RPTR points us here, but packet not done?\n"); + break; + } + dev_kfree_skb_irq(skb); + priv->tx_skbs[priv->tx_read] = NULL; + priv->tx_ring[priv->tx_read].header.raw = 0; + priv->tx_read = (priv->tx_read+1)&(TX_RING_ENTRIES-1); + priv->tx_count--; + } + + /* wake up queue if it was stopped */ + if (netif_queue_stopped(dev) && !meth_tx_full(dev)) { + netif_wake_queue(dev); + } + + mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT; + spin_unlock_irqrestore(&priv->meth_lock, flags); +} + +static void meth_error(struct net_device* dev, unsigned status) +{ + struct meth_private *priv = netdev_priv(dev); + unsigned long flags; + + printk(KERN_WARNING "meth: error status: 0x%08x\n",status); + /* check for errors too... */ + if (status & (METH_INT_TX_LINK_FAIL)) + printk(KERN_WARNING "meth: link failure\n"); + /* Should I do full reset in this case? */ + if (status & (METH_INT_MEM_ERROR)) + printk(KERN_WARNING "meth: memory error\n"); + if (status & (METH_INT_TX_ABORT)) + printk(KERN_WARNING "meth: aborted\n"); + if (status & (METH_INT_RX_OVERFLOW)) + printk(KERN_WARNING "meth: Rx overflow\n"); + if (status & (METH_INT_RX_UNDERFLOW)) { + printk(KERN_WARNING "meth: Rx underflow\n"); + spin_lock_irqsave(&priv->meth_lock, flags); + mace->eth.int_stat = METH_INT_RX_UNDERFLOW; + /* more underflow interrupts will be delivered, + * effectively throwing us into an infinite loop. + * Thus I stop processing Rx in this case. */ + priv->dma_ctrl &= ~METH_DMA_RX_EN; + mace->eth.dma_ctrl = priv->dma_ctrl; + DPRINTK("Disabled meth Rx DMA temporarily\n"); + spin_unlock_irqrestore(&priv->meth_lock, flags); + } + mace->eth.int_stat = METH_INT_ERROR; +} + +/* + * The typical interrupt entry point + */ +static irqreturn_t meth_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct meth_private *priv = netdev_priv(dev); + unsigned long status; + + status = mace->eth.int_stat; + while (status & 0xff) { + /* First handle errors - if we get Rx underflow, + * Rx DMA will be disabled, and Rx handler will reenable + * it. I don't think it's possible to get Rx underflow, + * without getting Rx interrupt */ + if (status & METH_INT_ERROR) { + meth_error(dev, status); + } + if (status & (METH_INT_TX_EMPTY | METH_INT_TX_PKT)) { + /* a transmission is over: free the skb */ + meth_tx_cleanup(dev, status); + } + if (status & METH_INT_RX_THRESHOLD) { + if (!(priv->dma_ctrl & METH_DMA_RX_INT_EN)) + break; + /* send it to meth_rx for handling */ + meth_rx(dev, status); + } + status = mace->eth.int_stat; + } + + return IRQ_HANDLED; +} + +/* + * Transmits packets that fit into TX descriptor (are <=120B) + */ +static void meth_tx_short_prepare(struct meth_private *priv, + struct sk_buff *skb) +{ + tx_packet *desc = &priv->tx_ring[priv->tx_write]; + int len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len; + + desc->header.raw = METH_TX_CMD_INT_EN | (len-1) | ((128-len) << 16); + /* maybe I should set whole thing to 0 first... */ + skb_copy_from_linear_data(skb, desc->data.dt + (120 - len), skb->len); + if (skb->len < len) + memset(desc->data.dt + 120 - len + skb->len, 0, len-skb->len); +} +#define TX_CATBUF1 BIT(25) +static void meth_tx_1page_prepare(struct meth_private *priv, + struct sk_buff *skb) +{ + tx_packet *desc = &priv->tx_ring[priv->tx_write]; + void *buffer_data = (void *)(((unsigned long)skb->data + 7) & ~7); + int unaligned_len = (int)((unsigned long)buffer_data - (unsigned long)skb->data); + int buffer_len = skb->len - unaligned_len; + dma_addr_t catbuf; + + desc->header.raw = METH_TX_CMD_INT_EN | TX_CATBUF1 | (skb->len - 1); + + /* unaligned part */ + if (unaligned_len) { + skb_copy_from_linear_data(skb, desc->data.dt + (120 - unaligned_len), + unaligned_len); + desc->header.raw |= (128 - unaligned_len) << 16; + } + + /* first page */ + catbuf = dma_map_single(NULL, buffer_data, buffer_len, + DMA_TO_DEVICE); + desc->data.cat_buf[0].form.start_addr = catbuf >> 3; + desc->data.cat_buf[0].form.len = buffer_len - 1; +} +#define TX_CATBUF2 BIT(26) +static void meth_tx_2page_prepare(struct meth_private *priv, + struct sk_buff *skb) +{ + tx_packet *desc = &priv->tx_ring[priv->tx_write]; + void *buffer1_data = (void *)(((unsigned long)skb->data + 7) & ~7); + void *buffer2_data = (void *)PAGE_ALIGN((unsigned long)skb->data); + int unaligned_len = (int)((unsigned long)buffer1_data - (unsigned long)skb->data); + int buffer1_len = (int)((unsigned long)buffer2_data - (unsigned long)buffer1_data); + int buffer2_len = skb->len - buffer1_len - unaligned_len; + dma_addr_t catbuf1, catbuf2; + + desc->header.raw = METH_TX_CMD_INT_EN | TX_CATBUF1 | TX_CATBUF2| (skb->len - 1); + /* unaligned part */ + if (unaligned_len){ + skb_copy_from_linear_data(skb, desc->data.dt + (120 - unaligned_len), + unaligned_len); + desc->header.raw |= (128 - unaligned_len) << 16; + } + + /* first page */ + catbuf1 = dma_map_single(NULL, buffer1_data, buffer1_len, + DMA_TO_DEVICE); + desc->data.cat_buf[0].form.start_addr = catbuf1 >> 3; + desc->data.cat_buf[0].form.len = buffer1_len - 1; + /* second page */ + catbuf2 = dma_map_single(NULL, buffer2_data, buffer2_len, + DMA_TO_DEVICE); + desc->data.cat_buf[1].form.start_addr = catbuf2 >> 3; + desc->data.cat_buf[1].form.len = buffer2_len - 1; +} + +static void meth_add_to_tx_ring(struct meth_private *priv, struct sk_buff *skb) +{ + /* Remember the skb, so we can free it at interrupt time */ + priv->tx_skbs[priv->tx_write] = skb; + if (skb->len <= 120) { + /* Whole packet fits into descriptor */ + meth_tx_short_prepare(priv, skb); + } else if (PAGE_ALIGN((unsigned long)skb->data) != + PAGE_ALIGN((unsigned long)skb->data + skb->len - 1)) { + /* Packet crosses page boundary */ + meth_tx_2page_prepare(priv, skb); + } else { + /* Packet is in one page */ + meth_tx_1page_prepare(priv, skb); + } + priv->tx_write = (priv->tx_write + 1) & (TX_RING_ENTRIES - 1); + mace->eth.tx_info = priv->tx_write; + priv->tx_count++; +} + +/* + * Transmit a packet (called by the kernel) + */ +static int meth_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->meth_lock, flags); + /* Stop DMA notification */ + priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN); + mace->eth.dma_ctrl = priv->dma_ctrl; + + meth_add_to_tx_ring(priv, skb); + dev->trans_start = jiffies; /* save the timestamp */ + + /* If TX ring is full, tell the upper layer to stop sending packets */ + if (meth_tx_full(dev)) { + printk(KERN_DEBUG "TX full: stopping\n"); + netif_stop_queue(dev); + } + + /* Restart DMA notification */ + priv->dma_ctrl |= METH_DMA_TX_INT_EN; + mace->eth.dma_ctrl = priv->dma_ctrl; + + spin_unlock_irqrestore(&priv->meth_lock, flags); + + return NETDEV_TX_OK; +} + +/* + * Deal with a transmit timeout. + */ +static void meth_tx_timeout(struct net_device *dev) +{ + struct meth_private *priv = netdev_priv(dev); + unsigned long flags; + + printk(KERN_WARNING "%s: transmit timed out\n", dev->name); + + /* Protect against concurrent rx interrupts */ + spin_lock_irqsave(&priv->meth_lock,flags); + + /* Try to reset the interface. */ + meth_reset(dev); + + dev->stats.tx_errors++; + + /* Clear all rings */ + meth_free_tx_ring(priv); + meth_free_rx_ring(priv); + meth_init_tx_ring(priv); + meth_init_rx_ring(priv); + + /* Restart dma */ + priv->dma_ctrl |= METH_DMA_TX_EN | METH_DMA_RX_EN | METH_DMA_RX_INT_EN; + mace->eth.dma_ctrl = priv->dma_ctrl; + + /* Enable interrupt */ + spin_unlock_irqrestore(&priv->meth_lock, flags); + + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +/* + * Ioctl commands + */ +static int meth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + /* XXX Not yet implemented */ + switch(cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + default: + return -EOPNOTSUPP; + } +} + +static const struct net_device_ops meth_netdev_ops = { + .ndo_open = meth_open, + .ndo_stop = meth_release, + .ndo_start_xmit = meth_tx, + .ndo_do_ioctl = meth_ioctl, + .ndo_tx_timeout = meth_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + +/* + * The init function. + */ +static int __devinit meth_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct meth_private *priv; + int err; + + dev = alloc_etherdev(sizeof(struct meth_private)); + if (!dev) + return -ENOMEM; + + dev->netdev_ops = &meth_netdev_ops; + dev->watchdog_timeo = timeout; + dev->irq = MACE_ETHERNET_IRQ; + dev->base_addr = (unsigned long)&mace->eth; + memcpy(dev->dev_addr, o2meth_eaddr, 6); + + priv = netdev_priv(dev); + spin_lock_init(&priv->meth_lock); + SET_NETDEV_DEV(dev, &pdev->dev); + + err = register_netdev(dev); + if (err) { + free_netdev(dev); + return err; + } + + printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n", + dev->name, (unsigned int)(mace->eth.mac_ctrl >> 29)); + return 0; +} + +static int __exit meth_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + unregister_netdev(dev); + free_netdev(dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver meth_driver = { + .probe = meth_probe, + .remove = __exit_p(meth_remove), + .driver = { + .name = "meth", + .owner = THIS_MODULE, + } +}; + +static int __init meth_init_module(void) +{ + int err; + + err = platform_driver_register(&meth_driver); + if (err) + printk(KERN_ERR "Driver registration failed\n"); + + return err; +} + +static void __exit meth_exit_module(void) +{ + platform_driver_unregister(&meth_driver); +} + +module_init(meth_init_module); +module_exit(meth_exit_module); + +MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>"); +MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:meth"); diff --git a/drivers/net/ethernet/sgi/meth.h b/drivers/net/ethernet/sgi/meth.h new file mode 100644 index 000000000000..5b145c6bad60 --- /dev/null +++ b/drivers/net/ethernet/sgi/meth.h @@ -0,0 +1,243 @@ + +/* + * snull.h -- definitions for the network module + * + * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet + * Copyright (C) 2001 O'Reilly & Associates + * + * The source code in this file can be freely used, adapted, + * and redistributed in source or binary form, so long as an + * acknowledgment appears in derived source files. The citation + * should list that the code comes from the book "Linux Device + * Drivers" by Alessandro Rubini and Jonathan Corbet, published + * by O'Reilly & Associates. No warranty is attached; + * we cannot take responsibility for errors or fitness for use. + */ + +/* version dependencies have been confined to a separate file */ + +/* Tunable parameters */ +#define TX_RING_ENTRIES 64 /* 64-512?*/ + +#define RX_RING_ENTRIES 16 /* Do not change */ +/* Internal constants */ +#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet)) +#define RX_BUFFER_SIZE 1546 /* ethenet packet size */ +#define METH_RX_BUFF_SIZE 4096 +#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */ +#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */ +#define RX_BUCKET_SIZE 256 + +/* For more detailed explanations of what each field menas, + see Nick's great comments to #defines below (or docs, if + you are lucky enough toget hold of them :)*/ + +/* tx status vector is written over tx command header upon + dma completion. */ + +typedef struct tx_status_vector { + u64 sent:1; /* always set to 1...*/ + u64 pad0:34;/* always set to 0 */ + u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/ + u64 col_retry_cnt:4; /*collision retry count*/ + u64 len:16; /*Transmit length in bytes*/ +} tx_status_vector; + +/* + * Each packet is 128 bytes long. + * It consists of header, 0-3 concatination + * buffer pointers and up to 120 data bytes. + */ +typedef struct tx_packet_hdr { + u64 pad1:36; /*should be filled with 0 */ + u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/ + cat_ptr2_valid:1, + cat_ptr1_valid:1; + u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/ + u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/ + u64 data_offset:7; /*Starting byte offset in ring data block*/ + u64 data_len:16; /*Length of valid data in bytes-1*/ +} tx_packet_hdr; +typedef union tx_cat_ptr { + struct { + u64 pad2:16; /* should be 0 */ + u64 len:16; /*length of buffer data - 1*/ + u64 start_addr:29; /*Physical starting address*/ + u64 pad1:3; /* should be zero */ + } form; + u64 raw; +} tx_cat_ptr; + +typedef struct tx_packet { + union { + tx_packet_hdr header; + tx_status_vector res; + u64 raw; + }header; + union { + tx_cat_ptr cat_buf[3]; + char dt[120]; + } data; +} tx_packet; + +typedef union rx_status_vector { + volatile struct { + u64 pad1:1;/*fill it with ones*/ + u64 pad2:15;/*fill with 0*/ + u64 ip_chk_sum:16; + u64 seq_num:5; + u64 mac_addr_match:1; + u64 mcast_addr_match:1; + u64 carrier_event_seen:1; + u64 bad_packet:1; + u64 long_event_seen:1; + u64 invalid_preamble:1; + u64 broadcast:1; + u64 multicast:1; + u64 crc_error:1; + u64 huh:1;/*???*/ + u64 rx_code_violation:1; + u64 rx_len:16; + } parsed; + volatile u64 raw; +} rx_status_vector; + +typedef struct rx_packet { + rx_status_vector status; + u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */ + u16 pad2; + char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */ +} rx_packet; + +#define TX_INFO_RPTR 0x00FF0000 +#define TX_INFO_WPTR 0x000000FF + + /* Bits in METH_MAC */ + +#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */ +#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */ +#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */ + /* selects ignored */ +#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */ +#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */ + /* Note: when loopback is set this bit becomes collision control. Setting this bit will */ + /* cause a collision to be reported. */ + + /* Bits 5 and 6 are used to determine the Destination address filter mode */ +#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ +#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ +#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ +#define METH_PROMISC 0x60 /* 11: Promiscious mode */ + +#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */ + +#define METH_MAC_IPG 0x1ffff00 + +#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8)) + /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/ + /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */ + /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */ + /* per increment for 10BaseT */ + + /* Bits 15 through 21 are used to determine IPGR1 */ + + /* Bits 22 through 28 are used to determine IPGR2 */ + +#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */ + /* 000: Initial revision */ + /* 001: First revision, Improved TX concatenation */ + + +/* DMA control bits */ +#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */ +#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */ + +#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */ +#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */ +#define METH_DMA_RX_EN BIT(15) /* Enable RX */ +#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */ + +/* RX FIFO MCL Info bits */ +#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf) +#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf) +#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f) + +/* RX status bits */ + +#define METH_RX_ST_VALID BIT(63) +#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16) +#define METH_RX_ST_DRBL_NBL BIT(17) +#define METH_RX_ST_CRC_ERR BIT(18) +#define METH_RX_ST_MCAST_PKT BIT(19) +#define METH_RX_ST_BCAST_PKT BIT(20) +#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21) +#define METH_RX_ST_LONG_EVT_SEEN BIT(22) +#define METH_RX_ST_BAD_PACKET BIT(23) +#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24) +#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25) +#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26) + +#define METH_RX_STATUS_ERRORS \ + ( \ + METH_RX_ST_RCV_CODE_VIOLATION| \ + METH_RX_ST_CRC_ERR| \ + METH_RX_ST_INV_PREAMBLE_CTX| \ + METH_RX_ST_LONG_EVT_SEEN| \ + METH_RX_ST_BAD_PACKET| \ + METH_RX_ST_CARRIER_EVT_SEEN \ + ) + /* Bits in METH_INT */ + /* Write _1_ to corresponding bit to clear */ +#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */ +#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */ + /* 1: A TX message had the INT request bit set, the packet has been sent. */ +#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */ +#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */ + /* 1: A memory error occurred during DMA, DMA stopped, Fatal */ +#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */ +#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */ +#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */ +#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */ + +/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */ +#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/ + + /* Bits 13 through 15 are always 0. */ + +#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */ + +#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */ + + /* top of the queue */ + +#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \ + METH_INT_MEM_ERROR| \ + METH_INT_TX_ABORT| \ + METH_INT_RX_OVERFLOW| \ + METH_INT_RX_UNDERFLOW) + +#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */ + +/* TX status bits */ +#define METH_TX_ST_DONE BIT(63) /* TX complete */ +#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */ +#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */ +#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */ +#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */ +#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */ +#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */ + + +/* Tx command header bits */ +#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */ + +/* Phy MDIO interface busy flag */ +#define MDIO_BUSY BIT(16) +#define MDIO_DATA_MASK 0xFFFF +/* PHY defines */ +#define PHY_QS6612X 0x0181441 /* Quality TX */ +#define PHY_ICS1889 0x0015F41 /* ICS FX */ +#define PHY_ICS1890 0x0015F42 /* ICS TX */ +#define PHY_DP83840 0x20005C0 /* National TX */ + +#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1) |