diff options
Diffstat (limited to 'drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c')
-rw-r--r-- | drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 103 |
1 files changed, 88 insertions, 15 deletions
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 106a12f2a02f..5b5d2edf125d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -499,6 +499,7 @@ int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, const u8 *addr, u16 vlan) void __qlcnic_set_multi(struct net_device *netdev, u16 vlan) { struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_hardware_context *ahw = adapter->ahw; struct netdev_hw_addr *ha; static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff @@ -515,25 +516,30 @@ void __qlcnic_set_multi(struct net_device *netdev, u16 vlan) if (netdev->flags & IFF_PROMISC) { if (!(adapter->flags & QLCNIC_PROMISC_DISABLED)) mode = VPORT_MISS_MODE_ACCEPT_ALL; - goto send_fw_cmd; - } - - if ((netdev->flags & IFF_ALLMULTI) || - (netdev_mc_count(netdev) > adapter->ahw->max_mc_count)) { - mode = VPORT_MISS_MODE_ACCEPT_MULTI; - goto send_fw_cmd; + } else if (netdev->flags & IFF_ALLMULTI) { + if (netdev_mc_count(netdev) > ahw->max_mc_count) { + mode = VPORT_MISS_MODE_ACCEPT_MULTI; + } else if (!netdev_mc_empty(netdev) && + !qlcnic_sriov_vf_check(adapter)) { + netdev_for_each_mc_addr(ha, netdev) + qlcnic_nic_add_mac(adapter, ha->addr, + vlan); + } + if (mode != VPORT_MISS_MODE_ACCEPT_MULTI && + qlcnic_sriov_vf_check(adapter)) + qlcnic_vf_add_mc_list(netdev, vlan); } - if (!netdev_mc_empty(netdev) && !qlcnic_sriov_vf_check(adapter)) { - netdev_for_each_mc_addr(ha, netdev) { + /* configure unicast MAC address, if there is not sufficient space + * to store all the unicast addresses then enable promiscuous mode + */ + if (netdev_uc_count(netdev) > ahw->max_uc_count) { + mode = VPORT_MISS_MODE_ACCEPT_ALL; + } else if (!netdev_uc_empty(netdev)) { + netdev_for_each_uc_addr(ha, netdev) qlcnic_nic_add_mac(adapter, ha->addr, vlan); - } } - if (qlcnic_sriov_vf_check(adapter)) - qlcnic_vf_add_mc_list(netdev, vlan); - -send_fw_cmd: if (!qlcnic_sriov_vf_check(adapter)) { if (mode == VPORT_MISS_MODE_ACCEPT_ALL && !adapter->fdb_mac_learn) { @@ -780,7 +786,8 @@ int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) word = 0; if (enable) { word = QLCNIC_ENABLE_IPV4_LRO | QLCNIC_NO_DEST_IPV4_CHECK; - if (adapter->ahw->capabilities2 & QLCNIC_FW_CAP2_HW_LRO_IPV6) + if (adapter->ahw->extra_capability[0] & + QLCNIC_FW_CAP2_HW_LRO_IPV6) word |= QLCNIC_ENABLE_IPV6_LRO | QLCNIC_NO_DEST_IPV6_CHECK; } @@ -1503,6 +1510,21 @@ int qlcnic_82xx_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate) return rv; } +int qlcnic_get_beacon_state(struct qlcnic_adapter *adapter, u8 *h_state) +{ + struct qlcnic_cmd_args cmd; + int err; + + err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_LED_STATUS); + if (!err) { + err = qlcnic_issue_cmd(adapter, &cmd); + if (!err) + *h_state = cmd.rsp.arg[1]; + } + qlcnic_free_mbx_args(&cmd); + return err; +} + void qlcnic_82xx_get_func_no(struct qlcnic_adapter *adapter) { void __iomem *msix_base_addr; @@ -1555,3 +1577,54 @@ void qlcnic_82xx_api_unlock(struct qlcnic_adapter *adapter) { qlcnic_pcie_sem_unlock(adapter, 5); } + +int qlcnic_82xx_shutdown(struct pci_dev *pdev) +{ + struct qlcnic_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + int retval; + + netif_device_detach(netdev); + + qlcnic_cancel_idc_work(adapter); + + if (netif_running(netdev)) + qlcnic_down(adapter, netdev); + + qlcnic_clr_all_drv_state(adapter, 0); + + clear_bit(__QLCNIC_RESETTING, &adapter->state); + + retval = pci_save_state(pdev); + if (retval) + return retval; + + if (qlcnic_wol_supported(adapter)) { + pci_enable_wake(pdev, PCI_D3cold, 1); + pci_enable_wake(pdev, PCI_D3hot, 1); + } + + return 0; +} + +int qlcnic_82xx_resume(struct qlcnic_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + + err = qlcnic_start_firmware(adapter); + if (err) { + dev_err(&adapter->pdev->dev, "failed to start firmware\n"); + return err; + } + + if (netif_running(netdev)) { + err = qlcnic_up(adapter, netdev); + if (!err) + qlcnic_restore_indev_addr(netdev, NETDEV_UP); + } + + netif_device_attach(netdev); + qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY); + return err; +} |