summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/micrel/ks8695net.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/micrel/ks8695net.c')
-rw-r--r--drivers/net/ethernet/micrel/ks8695net.c102
1 files changed, 55 insertions, 47 deletions
diff --git a/drivers/net/ethernet/micrel/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
index 20cb85bc0c5f..bd51e057e915 100644
--- a/drivers/net/ethernet/micrel/ks8695net.c
+++ b/drivers/net/ethernet/micrel/ks8695net.c
@@ -519,7 +519,7 @@ static int ks8695_rx(struct ks8695_priv *ksp, int budget)
/* Relinquish the SKB to the network layer */
skb_put(skb, pktlen);
skb->protocol = eth_type_trans(skb, ndev);
- netif_receive_skb(skb);
+ napi_gro_receive(&ksp->napi, skb);
/* Record stats */
ndev->stats.rx_packets++;
@@ -561,18 +561,17 @@ rx_finished:
static int ks8695_poll(struct napi_struct *napi, int budget)
{
struct ks8695_priv *ksp = container_of(napi, struct ks8695_priv, napi);
- unsigned long work_done;
-
unsigned long isr = readl(KS8695_IRQ_VA + KS8695_INTEN);
unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
+ int work_done;
work_done = ks8695_rx(ksp, budget);
- if (work_done < budget) {
+ if (work_done < budget && napi_complete_done(napi, work_done)) {
unsigned long flags;
+
spin_lock_irqsave(&ksp->rx_lock, flags);
- __napi_complete(napi);
- /*enable rx interrupt*/
+ /* enable rx interrupt */
writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
spin_unlock_irqrestore(&ksp->rx_lock, flags);
}
@@ -855,85 +854,94 @@ ks8695_set_msglevel(struct net_device *ndev, u32 value)
}
/**
- * ks8695_wan_get_settings - Get device-specific settings.
+ * ks8695_wan_get_link_ksettings - Get device-specific settings.
* @ndev: The network device to read settings from
* @cmd: The ethtool structure to read into
*/
static int
-ks8695_wan_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+ks8695_wan_get_link_ksettings(struct net_device *ndev,
+ struct ethtool_link_ksettings *cmd)
{
struct ks8695_priv *ksp = netdev_priv(ndev);
u32 ctrl;
+ u32 supported, advertising;
/* All ports on the KS8695 support these... */
- cmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
SUPPORTED_TP | SUPPORTED_MII);
- cmd->transceiver = XCVR_INTERNAL;
- cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
- cmd->port = PORT_MII;
- cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
- cmd->phy_address = 0;
+ advertising = ADVERTISED_TP | ADVERTISED_MII;
+ cmd->base.port = PORT_MII;
+ supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
+ cmd->base.phy_address = 0;
ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
if ((ctrl & WMC_WAND) == 0) {
/* auto-negotiation is enabled */
- cmd->advertising |= ADVERTISED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
if (ctrl & WMC_WANA100F)
- cmd->advertising |= ADVERTISED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
if (ctrl & WMC_WANA100H)
- cmd->advertising |= ADVERTISED_100baseT_Half;
+ advertising |= ADVERTISED_100baseT_Half;
if (ctrl & WMC_WANA10F)
- cmd->advertising |= ADVERTISED_10baseT_Full;
+ advertising |= ADVERTISED_10baseT_Full;
if (ctrl & WMC_WANA10H)
- cmd->advertising |= ADVERTISED_10baseT_Half;
+ advertising |= ADVERTISED_10baseT_Half;
if (ctrl & WMC_WANAP)
- cmd->advertising |= ADVERTISED_Pause;
- cmd->autoneg = AUTONEG_ENABLE;
+ advertising |= ADVERTISED_Pause;
+ cmd->base.autoneg = AUTONEG_ENABLE;
- ethtool_cmd_speed_set(cmd,
- (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10);
- cmd->duplex = (ctrl & WMC_WDS) ?
+ cmd->base.speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
+ cmd->base.duplex = (ctrl & WMC_WDS) ?
DUPLEX_FULL : DUPLEX_HALF;
} else {
/* auto-negotiation is disabled */
- cmd->autoneg = AUTONEG_DISABLE;
+ cmd->base.autoneg = AUTONEG_DISABLE;
- ethtool_cmd_speed_set(cmd, ((ctrl & WMC_WANF100) ?
- SPEED_100 : SPEED_10));
- cmd->duplex = (ctrl & WMC_WANFF) ?
+ cmd->base.speed = (ctrl & WMC_WANF100) ?
+ SPEED_100 : SPEED_10;
+ cmd->base.duplex = (ctrl & WMC_WANFF) ?
DUPLEX_FULL : DUPLEX_HALF;
}
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}
/**
- * ks8695_wan_set_settings - Set device-specific settings.
+ * ks8695_wan_set_link_ksettings - Set device-specific settings.
* @ndev: The network device to configure
* @cmd: The settings to configure
*/
static int
-ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+ks8695_wan_set_link_ksettings(struct net_device *ndev,
+ const struct ethtool_link_ksettings *cmd)
{
struct ks8695_priv *ksp = netdev_priv(ndev);
u32 ctrl;
+ u32 advertising;
- if ((cmd->speed != SPEED_10) && (cmd->speed != SPEED_100))
- return -EINVAL;
- if ((cmd->duplex != DUPLEX_HALF) && (cmd->duplex != DUPLEX_FULL))
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
+
+ if ((cmd->base.speed != SPEED_10) && (cmd->base.speed != SPEED_100))
return -EINVAL;
- if (cmd->port != PORT_MII)
+ if ((cmd->base.duplex != DUPLEX_HALF) &&
+ (cmd->base.duplex != DUPLEX_FULL))
return -EINVAL;
- if (cmd->transceiver != XCVR_INTERNAL)
+ if (cmd->base.port != PORT_MII)
return -EINVAL;
- if ((cmd->autoneg != AUTONEG_DISABLE) &&
- (cmd->autoneg != AUTONEG_ENABLE))
+ if ((cmd->base.autoneg != AUTONEG_DISABLE) &&
+ (cmd->base.autoneg != AUTONEG_ENABLE))
return -EINVAL;
- if (cmd->autoneg == AUTONEG_ENABLE) {
- if ((cmd->advertising & (ADVERTISED_10baseT_Half |
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
+ if ((advertising & (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full)) == 0)
@@ -943,13 +951,13 @@ ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H |
WMC_WANA10F | WMC_WANA10H);
- if (cmd->advertising & ADVERTISED_100baseT_Full)
+ if (advertising & ADVERTISED_100baseT_Full)
ctrl |= WMC_WANA100F;
- if (cmd->advertising & ADVERTISED_100baseT_Half)
+ if (advertising & ADVERTISED_100baseT_Half)
ctrl |= WMC_WANA100H;
- if (cmd->advertising & ADVERTISED_10baseT_Full)
+ if (advertising & ADVERTISED_10baseT_Full)
ctrl |= WMC_WANA10F;
- if (cmd->advertising & ADVERTISED_10baseT_Half)
+ if (advertising & ADVERTISED_10baseT_Half)
ctrl |= WMC_WANA10H;
/* force a re-negotiation */
@@ -962,9 +970,9 @@ ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
ctrl |= WMC_WAND;
ctrl &= ~(WMC_WANF100 | WMC_WANFF);
- if (cmd->speed == SPEED_100)
+ if (cmd->base.speed == SPEED_100)
ctrl |= WMC_WANF100;
- if (cmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
ctrl |= WMC_WANFF;
writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
@@ -1043,12 +1051,12 @@ static const struct ethtool_ops ks8695_ethtool_ops = {
static const struct ethtool_ops ks8695_wan_ethtool_ops = {
.get_msglevel = ks8695_get_msglevel,
.set_msglevel = ks8695_set_msglevel,
- .get_settings = ks8695_wan_get_settings,
- .set_settings = ks8695_wan_set_settings,
.nway_reset = ks8695_wan_nwayreset,
.get_link = ethtool_op_get_link,
.get_pauseparam = ks8695_wan_get_pause,
.get_drvinfo = ks8695_get_drvinfo,
+ .get_link_ksettings = ks8695_wan_get_link_ksettings,
+ .set_link_ksettings = ks8695_wan_set_link_ksettings,
};
/* Network device interface functions */
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 01:14:13 +0300