diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_main.c | 27 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 9 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_main.c | 39 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 |
7 files changed, 108 insertions, 33 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index d7bdea79e9fa..8fd2458060a0 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -331,7 +331,8 @@ struct e1000_adapter { enum e1000_state_t { __E1000_TESTING, __E1000_RESETTING, - __E1000_DOWN + __E1000_DOWN, + __E1000_DISABLED }; #undef pr_fmt diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 1982f7917a8d..3dd4aeb2706d 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -945,7 +945,7 @@ static int e1000_init_hw_struct(struct e1000_adapter *adapter, static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; - struct e1000_adapter *adapter; + struct e1000_adapter *adapter = NULL; struct e1000_hw *hw; static int cards_found; @@ -955,6 +955,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u16 tmp = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; int bars, need_ioport; + bool disable_dev = false; /* do not allocate ioport bars when not needed */ need_ioport = e1000_is_need_ioport(pdev); @@ -1259,11 +1260,13 @@ err_mdio_ioremap: iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, bars); err_pci_reg: - pci_disable_device(pdev); + if (!adapter || disable_dev) + pci_disable_device(pdev); return err; } @@ -1281,6 +1284,7 @@ static void e1000_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + bool disable_dev; e1000_down_and_stop(adapter); e1000_release_manageability(adapter); @@ -1299,9 +1303,11 @@ static void e1000_remove(struct pci_dev *pdev) iounmap(hw->flash_address); pci_release_selected_regions(pdev, adapter->bars); + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); - pci_disable_device(pdev); + if (disable_dev) + pci_disable_device(pdev); } /** @@ -5156,7 +5162,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) if (netif_running(netdev)) e1000_free_irq(adapter); - pci_disable_device(pdev); + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); return 0; } @@ -5200,6 +5207,10 @@ static int e1000_resume(struct pci_dev *pdev) pr_err("Cannot enable PCI device from suspend\n"); return err; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); @@ -5274,7 +5285,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, if (netif_running(netdev)) e1000_down(adapter); - pci_disable_device(pdev); + + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); /* Request a slot slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -5302,6 +5315,10 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) pr_err("Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d6d4ed7acf03..31277d3bb7dc 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1367,6 +1367,9 @@ out: * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. + * + * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link + * up). **/ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { @@ -1382,7 +1385,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 0; + return 1; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) + if (ret_val) { e_dbg("Error configuring flow control\n"); + return ret_val; + } - return ret_val; + return 1; } static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 7f605221a686..a434fecfdfeb 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -2463,7 +2463,6 @@ static int fm10k_handle_resume(struct fm10k_intfc *interface) return err; } -#ifdef CONFIG_PM /** * fm10k_resume - Generic PM resume hook * @dev: generic device structure @@ -2472,7 +2471,7 @@ static int fm10k_handle_resume(struct fm10k_intfc *interface) * suspend or hibernation. This function does not need to handle lower PCIe * device state as the stack takes care of that for us. **/ -static int fm10k_resume(struct device *dev) +static int __maybe_unused fm10k_resume(struct device *dev) { struct fm10k_intfc *interface = pci_get_drvdata(to_pci_dev(dev)); struct net_device *netdev = interface->netdev; @@ -2499,7 +2498,7 @@ static int fm10k_resume(struct device *dev) * system suspend or hibernation. This function does not need to handle lower * PCIe device state as the stack takes care of that for us. **/ -static int fm10k_suspend(struct device *dev) +static int __maybe_unused fm10k_suspend(struct device *dev) { struct fm10k_intfc *interface = pci_get_drvdata(to_pci_dev(dev)); struct net_device *netdev = interface->netdev; @@ -2511,8 +2510,6 @@ static int fm10k_suspend(struct device *dev) return 0; } -#endif /* CONFIG_PM */ - /** * fm10k_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device @@ -2643,11 +2640,9 @@ static struct pci_driver fm10k_driver = { .id_table = fm10k_pci_tbl, .probe = fm10k_probe, .remove = fm10k_remove, -#ifdef CONFIG_PM .driver = { .pm = &fm10k_pm_ops, }, -#endif /* CONFIG_PM */ .sriov_configure = fm10k_iov_configure, .err_handler = &fm10k_err_handler }; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 321d8be80871..af792112a2d3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1573,11 +1573,18 @@ static int i40e_set_mac(struct net_device *netdev, void *p) else netdev_info(netdev, "set new mac address %pM\n", addr->sa_data); + /* Copy the address first, so that we avoid a possible race with + * .set_rx_mode(). If we copy after changing the address in the filter + * list, we might open ourselves to a narrow race window where + * .set_rx_mode could delete our dev_addr filter and prevent traffic + * from passing. + */ + ether_addr_copy(netdev->dev_addr, addr->sa_data); + spin_lock_bh(&vsi->mac_filter_hash_lock); i40e_del_mac_filter(vsi, netdev->dev_addr); i40e_add_mac_filter(vsi, addr->sa_data); spin_unlock_bh(&vsi->mac_filter_hash_lock); - ether_addr_copy(netdev->dev_addr, addr->sa_data); if (vsi->type == I40E_VSI_MAIN) { i40e_status ret; @@ -1923,6 +1930,14 @@ static int i40e_addr_unsync(struct net_device *netdev, const u8 *addr) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; + /* Under some circumstances, we might receive a request to delete + * our own device address from our uc list. Because we store the + * device address in the VSI's MAC/VLAN filter list, we need to ignore + * such requests and not delete our device address from this list. + */ + if (ether_addr_equal(addr, netdev->dev_addr)) + return 0; + i40e_del_mac_filter(vsi, addr); return 0; @@ -6038,8 +6053,8 @@ static int i40e_validate_and_set_switch_mode(struct i40e_vsi *vsi) /* Set Bit 7 to be valid */ mode = I40E_AQ_SET_SWITCH_BIT7_VALID; - /* Set L4type to both TCP and UDP support */ - mode |= I40E_AQ_SET_SWITCH_L4_TYPE_BOTH; + /* Set L4type for TCP support */ + mode |= I40E_AQ_SET_SWITCH_L4_TYPE_TCP; /* Set cloud filter mode */ mode |= I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL; @@ -6969,18 +6984,18 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, is_valid_ether_addr(filter->src_mac)) || (is_multicast_ether_addr(filter->dst_mac) && is_multicast_ether_addr(filter->src_mac))) - return -EINVAL; + return -EOPNOTSUPP; - /* Make sure port is specified, otherwise bail out, for channel - * specific cloud filter needs 'L4 port' to be non-zero + /* Big buffer cloud filter needs 'L4 port' to be non-zero. Also, UDP + * ports are not supported via big buffer now. */ - if (!filter->dst_port) - return -EINVAL; + if (!filter->dst_port || filter->ip_proto == IPPROTO_UDP) + return -EOPNOTSUPP; /* adding filter using src_port/src_ip is not supported at this stage */ if (filter->src_port || filter->src_ipv4 || !ipv6_addr_any(&filter->ip.v6.src_ip6)) - return -EINVAL; + return -EOPNOTSUPP; /* copy element needed to add cloud filter from filter */ i40e_set_cld_element(filter, &cld_filter.element); @@ -6991,7 +7006,7 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, is_multicast_ether_addr(filter->src_mac)) { /* MAC + IP : unsupported mode */ if (filter->dst_ipv4) - return -EINVAL; + return -EOPNOTSUPP; /* since we validated that L4 port must be valid before * we get here, start with respective "flags" value @@ -7356,7 +7371,7 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi, if (tc < 0) { dev_err(&vsi->back->pdev->dev, "Invalid traffic class\n"); - return -EINVAL; + return -EOPNOTSUPP; } if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) || @@ -7490,6 +7505,8 @@ static int i40e_setup_tc_cls_flower(struct i40e_netdev_priv *np, { struct i40e_vsi *vsi = np->vsi; + if (!tc_can_offload(vsi->netdev)) + return -EOPNOTSUPP; if (cls_flower->common.chain_index) return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 4566d66ffc7c..5bc2748ac468 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -3047,10 +3047,30 @@ bool __i40e_chk_linearize(struct sk_buff *skb) /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -3058,7 +3078,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb) if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 50864f99446d..1ba29bb85b67 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -2012,10 +2012,30 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -2023,7 +2043,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; |