diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 240 |
1 files changed, 231 insertions, 9 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 0b82d38bc97d..207f68fbe3d3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -58,6 +58,10 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); static bool ixgbe_mng_enabled(struct ixgbe_hw *hw) { @@ -219,6 +223,25 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) struct ixgbe_mac_info *mac = &hw->mac; struct ixgbe_phy_info *phy = &hw->phy; s32 ret_val = 0; + u32 esdp; + + if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { + /* Store flag indicating I2C bus access control unit. */ + hw->phy.qsfp_shared_i2c_bus = true; + + /* Initialize access to QSFP+ I2C bus */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0_DIR; + esdp &= ~IXGBE_ESDP_SDP1_DIR; + esdp &= ~IXGBE_ESDP_SDP0; + esdp &= ~IXGBE_ESDP_SDP0_NATIVE; + esdp &= ~IXGBE_ESDP_SDP1_NATIVE; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; + phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; + } /* Identify the PHY or SFP module */ ret_val = phy->ops.identify(hw); @@ -397,6 +420,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599_LS: media_type = ixgbe_media_type_fiber_lco; break; + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + media_type = ixgbe_media_type_fiber_qsfp; + break; default: media_type = ixgbe_media_type_unknown; break; @@ -527,6 +553,75 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** + * ixgbe_set_fiber_fixed_speed - Set module link speed for fixed fiber + * @hw: pointer to hardware structure + * @speed: link speed to set + * + * We set the module speed differently for fixed fiber. For other + * multi-speed devices we don't have an error value so here if we + * detect an error we just log it and exit. + */ +static void ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u8 rs, eeprom_data; + + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + /* one bit mask same as setting on */ + rs = IXGBE_SFF_SOFT_RS_SELECT_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + rs = IXGBE_SFF_SOFT_RS_SELECT_1G; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; + } + + /* Set RS0 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS0\n"); + goto out; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); + goto out; + } + + /* Set RS1 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS1\n"); + goto out; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS1\n"); + goto out; + } +out: + return; +} + +/** * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -573,9 +668,14 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { + ixgbe_set_fiber_fixed_speed(hw, + IXGBE_LINK_SPEED_10GB_FULL); + } else { + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + } /* Allow module to change analog characteristics (1G->10G) */ msleep(40); @@ -625,10 +725,15 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { + ixgbe_set_fiber_fixed_speed(hw, + IXGBE_LINK_SPEED_1GB_FULL); + } else { + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + } /* Allow module to change analog characteristics (10G->1G) */ msleep(40); @@ -1872,7 +1977,7 @@ static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) goto out; else - status = ixgbe_identify_sfp_module_generic(hw); + status = ixgbe_identify_module_generic(hw); } /* Set PHY type none if no PHY detected */ @@ -1978,10 +2083,12 @@ sfp_check: switch (hw->phy.type) { case ixgbe_phy_sfp_passive_tyco: case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_qsfp_passive_unknown: physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; break; case ixgbe_phy_sfp_ftl_active: case ixgbe_phy_sfp_active_unknown: + case ixgbe_phy_qsfp_active_unknown: physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; break; case ixgbe_phy_sfp_avago: @@ -1999,6 +2106,15 @@ sfp_check: else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; break; + case ixgbe_phy_qsfp_intel: + case ixgbe_phy_qsfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; default: break; } @@ -2236,6 +2352,112 @@ reset_pipeline_out: return ret_val; } +/** + * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + +/** + * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -2300,7 +2522,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = { static struct ixgbe_phy_operations phy_ops_82599 = { .identify = &ixgbe_identify_phy_82599, - .identify_sfp = &ixgbe_identify_sfp_module_generic, + .identify_sfp = &ixgbe_identify_module_generic, .init = &ixgbe_init_phy_ops_82599, .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, |