diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_phy.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.c | 229 |
1 files changed, 140 insertions, 89 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 23ec28f43f6d..5b54254aed4f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1717,59 +1717,76 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val; u16 phy_data, phy_data2, index, default_page, is_cm; + int len_tot = 0; + u16 len_min; + u16 len_max; switch (hw->phy.id) { + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case I347AT4_E_PHY_ID: case I210_I_PHY_ID: - /* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + - (I347AT4_PCDL + phy->addr), - &phy_data); + /* Remember the original page select and set it to 7 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); if (ret_val) - return ret_val; + goto out; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); + if (ret_val) + goto out; /* Check if the unit of cable length is meters or cm */ - ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + - I347AT4_PCDC, &phy_data2); + ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); if (ret_val) - return ret_val; + goto out; is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); - /* Populate the phy structure with cable length in meters */ - phy->min_cable_length = phy_data / (is_cm ? 100 : 1); - phy->max_cable_length = phy_data / (is_cm ? 100 : 1); - phy->cable_length = phy_data / (is_cm ? 100 : 1); - break; - case M88E1543_E_PHY_ID: - case M88E1512_E_PHY_ID: - case I347AT4_E_PHY_ID: - /* Remember the original page select and set it to 7 */ - ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, - &default_page); + /* Get cable length from Pair 0 length Regs */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDL0, &phy_data); if (ret_val) goto out; - ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); + phy->pair_length[0] = phy_data / (is_cm ? 100 : 1); + len_tot = phy->pair_length[0]; + len_min = phy->pair_length[0]; + len_max = phy->pair_length[0]; + + /* Get cable length from Pair 1 length Regs */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDL1, &phy_data); if (ret_val) goto out; - /* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), - &phy_data); + phy->pair_length[1] = phy_data / (is_cm ? 100 : 1); + len_tot += phy->pair_length[1]; + len_min = min(len_min, phy->pair_length[1]); + len_max = max(len_max, phy->pair_length[1]); + + /* Get cable length from Pair 2 length Regs */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDL2, &phy_data); if (ret_val) goto out; - /* Check if the unit of cable length is meters or cm */ - ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); + phy->pair_length[2] = phy_data / (is_cm ? 100 : 1); + len_tot += phy->pair_length[2]; + len_min = min(len_min, phy->pair_length[2]); + len_max = max(len_max, phy->pair_length[2]); + + /* Get cable length from Pair 3 length Regs */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDL3, &phy_data); if (ret_val) goto out; - is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + phy->pair_length[3] = phy_data / (is_cm ? 100 : 1); + len_tot += phy->pair_length[3]; + len_min = min(len_min, phy->pair_length[3]); + len_max = max(len_max, phy->pair_length[3]); /* Populate the phy structure with cable length in meters */ - phy->min_cable_length = phy_data / (is_cm ? 100 : 1); - phy->max_cable_length = phy_data / (is_cm ? 100 : 1); - phy->cable_length = phy_data / (is_cm ? 100 : 1); + phy->min_cable_length = len_min; + phy->max_cable_length = len_max; + phy->cable_length = len_tot / 4; /* Reset the page selec to its original value */ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, @@ -2278,6 +2295,100 @@ out: } /** + * igb_initialize_M88E1543_phy - Initialize M88E1512 PHY + * @hw: pointer to the HW structure + * + * Initialize Marvell 1543 to work correctly with Avoton. + **/ +s32 igb_initialize_M88E1543_phy(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Switch to PHY page 0xFF. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159); + if (ret_val) + goto out; + + /* Switch to PHY page 0xFB. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x0C0D); + if (ret_val) + goto out; + + /* Switch to PHY page 0x12. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12); + if (ret_val) + goto out; + + /* Change mode to SGMII-to-Copper */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001); + if (ret_val) + goto out; + + /* Switch to PHY page 1. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1); + if (ret_val) + goto out; + + /* Change mode to 1000BASE-X/SGMII and autoneg enable */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + ret_val = igb_phy_sw_reset(hw); + if (ret_val) { + hw_dbg("Error committing the PHY changes\n"); + return ret_val; + } + + /* msec_delay(1000); */ + usleep_range(1000, 2000); +out: + return ret_val; +} + +/** * igb_power_up_phy_copper - Restore copper link in case of PHY power down * @hw: pointer to the HW structure * @@ -2494,66 +2605,6 @@ out: } /** - * igb_write_phy_reg_gs40g - Write GS40G PHY register - * @hw: pointer to the HW structure - * @offset: lower half is register offset to write to - * upper half is page to use. - * @data: data to write at register offset - * - * Acquires semaphore, if necessary, then writes the data to PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) -{ - s32 ret_val; - u16 page = offset >> GS40G_PAGE_SHIFT; - - offset = offset & GS40G_OFFSET_MASK; - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); - if (ret_val) - goto release; - ret_val = igb_write_phy_reg_mdic(hw, offset, data); - -release: - hw->phy.ops.release(hw); - return ret_val; -} - -/** - * igb_read_phy_reg_gs40g - Read GS40G PHY register - * @hw: pointer to the HW structure - * @offset: lower half is register offset to read to - * upper half is page to use. - * @data: data to read at register offset - * - * Acquires semaphore, if necessary, then reads the data in the PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) -{ - s32 ret_val; - u16 page = offset >> GS40G_PAGE_SHIFT; - - offset = offset & GS40G_OFFSET_MASK; - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); - if (ret_val) - goto release; - ret_val = igb_read_phy_reg_mdic(hw, offset, data); - -release: - hw->phy.ops.release(hw); - return ret_val; -} - -/** * igb_set_master_slave_mode - Setup PHY for Master/slave mode * @hw: pointer to the HW structure * |