diff options
Diffstat (limited to 'drivers/net/ethernet/intel/idpf/virtchnl2.h')
| -rw-r--r-- | drivers/net/ethernet/intel/idpf/virtchnl2.h | 1273 |
1 files changed, 1273 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/idpf/virtchnl2.h b/drivers/net/ethernet/intel/idpf/virtchnl2.h new file mode 100644 index 000000000000..07e72c72d156 --- /dev/null +++ b/drivers/net/ethernet/intel/idpf/virtchnl2.h @@ -0,0 +1,1273 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (C) 2023 Intel Corporation */ + +#ifndef _VIRTCHNL2_H_ +#define _VIRTCHNL2_H_ + +/* All opcodes associated with virtchnl2 are prefixed with virtchnl2 or + * VIRTCHNL2. Any future opcodes, offloads/capabilities, structures, + * and defines must be prefixed with virtchnl2 or VIRTCHNL2 to avoid confusion. + * + * PF/VF uses the virtchnl2 interface defined in this header file to communicate + * with device Control Plane (CP). Driver and the CP may run on different + * platforms with different endianness. To avoid byte order discrepancies, + * all the structures in this header follow little-endian format. + * + * This is an interface definition file where existing enums and their values + * must remain unchanged over time, so we specify explicit values for all enums. + */ + +#include "virtchnl2_lan_desc.h" + +/* This macro is used to generate compilation errors if a structure + * is not exactly the correct length. + */ +#define VIRTCHNL2_CHECK_STRUCT_LEN(n, X) \ + static_assert((n) == sizeof(struct X)) + +/* New major set of opcodes introduced and so leaving room for + * old misc opcodes to be added in future. Also these opcodes may only + * be used if both the PF and VF have successfully negotiated the + * VIRTCHNL version as 2.0 during VIRTCHNL2_OP_VERSION exchange. + */ +enum virtchnl2_op { + VIRTCHNL2_OP_UNKNOWN = 0, + VIRTCHNL2_OP_VERSION = 1, + VIRTCHNL2_OP_GET_CAPS = 500, + VIRTCHNL2_OP_CREATE_VPORT = 501, + VIRTCHNL2_OP_DESTROY_VPORT = 502, + VIRTCHNL2_OP_ENABLE_VPORT = 503, + VIRTCHNL2_OP_DISABLE_VPORT = 504, + VIRTCHNL2_OP_CONFIG_TX_QUEUES = 505, + VIRTCHNL2_OP_CONFIG_RX_QUEUES = 506, + VIRTCHNL2_OP_ENABLE_QUEUES = 507, + VIRTCHNL2_OP_DISABLE_QUEUES = 508, + VIRTCHNL2_OP_ADD_QUEUES = 509, + VIRTCHNL2_OP_DEL_QUEUES = 510, + VIRTCHNL2_OP_MAP_QUEUE_VECTOR = 511, + VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR = 512, + VIRTCHNL2_OP_GET_RSS_KEY = 513, + VIRTCHNL2_OP_SET_RSS_KEY = 514, + VIRTCHNL2_OP_GET_RSS_LUT = 515, + VIRTCHNL2_OP_SET_RSS_LUT = 516, + VIRTCHNL2_OP_GET_RSS_HASH = 517, + VIRTCHNL2_OP_SET_RSS_HASH = 518, + VIRTCHNL2_OP_SET_SRIOV_VFS = 519, + VIRTCHNL2_OP_ALLOC_VECTORS = 520, + VIRTCHNL2_OP_DEALLOC_VECTORS = 521, + VIRTCHNL2_OP_EVENT = 522, + VIRTCHNL2_OP_GET_STATS = 523, + VIRTCHNL2_OP_RESET_VF = 524, + VIRTCHNL2_OP_GET_EDT_CAPS = 525, + VIRTCHNL2_OP_GET_PTYPE_INFO = 526, + /* Opcode 527 and 528 are reserved for VIRTCHNL2_OP_GET_PTYPE_ID and + * VIRTCHNL2_OP_GET_PTYPE_INFO_RAW. + * Opcodes 529, 530, 531, 532 and 533 are reserved. + */ + VIRTCHNL2_OP_LOOPBACK = 534, + VIRTCHNL2_OP_ADD_MAC_ADDR = 535, + VIRTCHNL2_OP_DEL_MAC_ADDR = 536, + VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE = 537, +}; + +/** + * enum virtchnl2_vport_type - Type of virtual port. + * @VIRTCHNL2_VPORT_TYPE_DEFAULT: Default virtual port type. + */ +enum virtchnl2_vport_type { + VIRTCHNL2_VPORT_TYPE_DEFAULT = 0, +}; + +/** + * enum virtchnl2_queue_model - Type of queue model. + * @VIRTCHNL2_QUEUE_MODEL_SINGLE: Single queue model. + * @VIRTCHNL2_QUEUE_MODEL_SPLIT: Split queue model. + * + * In the single queue model, the same transmit descriptor queue is used by + * software to post descriptors to hardware and by hardware to post completed + * descriptors to software. + * Likewise, the same receive descriptor queue is used by hardware to post + * completions to software and by software to post buffers to hardware. + * + * In the split queue model, hardware uses transmit completion queues to post + * descriptor/buffer completions to software, while software uses transmit + * descriptor queues to post descriptors to hardware. + * Likewise, hardware posts descriptor completions to the receive descriptor + * queue, while software uses receive buffer queues to post buffers to hardware. + */ +enum virtchnl2_queue_model { + VIRTCHNL2_QUEUE_MODEL_SINGLE = 0, + VIRTCHNL2_QUEUE_MODEL_SPLIT = 1, +}; + +/* Checksum offload capability flags */ +enum virtchnl2_cap_txrx_csum { + VIRTCHNL2_CAP_TX_CSUM_L3_IPV4 = BIT(0), + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP = BIT(1), + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP = BIT(2), + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP = BIT(3), + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP = BIT(4), + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP = BIT(5), + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP = BIT(6), + VIRTCHNL2_CAP_TX_CSUM_GENERIC = BIT(7), + VIRTCHNL2_CAP_RX_CSUM_L3_IPV4 = BIT(8), + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP = BIT(9), + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP = BIT(10), + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP = BIT(11), + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP = BIT(12), + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP = BIT(13), + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP = BIT(14), + VIRTCHNL2_CAP_RX_CSUM_GENERIC = BIT(15), + VIRTCHNL2_CAP_TX_CSUM_L3_SINGLE_TUNNEL = BIT(16), + VIRTCHNL2_CAP_TX_CSUM_L3_DOUBLE_TUNNEL = BIT(17), + VIRTCHNL2_CAP_RX_CSUM_L3_SINGLE_TUNNEL = BIT(18), + VIRTCHNL2_CAP_RX_CSUM_L3_DOUBLE_TUNNEL = BIT(19), + VIRTCHNL2_CAP_TX_CSUM_L4_SINGLE_TUNNEL = BIT(20), + VIRTCHNL2_CAP_TX_CSUM_L4_DOUBLE_TUNNEL = BIT(21), + VIRTCHNL2_CAP_RX_CSUM_L4_SINGLE_TUNNEL = BIT(22), + VIRTCHNL2_CAP_RX_CSUM_L4_DOUBLE_TUNNEL = BIT(23), +}; + +/* Segmentation offload capability flags */ +enum virtchnl2_cap_seg { + VIRTCHNL2_CAP_SEG_IPV4_TCP = BIT(0), + VIRTCHNL2_CAP_SEG_IPV4_UDP = BIT(1), + VIRTCHNL2_CAP_SEG_IPV4_SCTP = BIT(2), + VIRTCHNL2_CAP_SEG_IPV6_TCP = BIT(3), + VIRTCHNL2_CAP_SEG_IPV6_UDP = BIT(4), + VIRTCHNL2_CAP_SEG_IPV6_SCTP = BIT(5), + VIRTCHNL2_CAP_SEG_GENERIC = BIT(6), + VIRTCHNL2_CAP_SEG_TX_SINGLE_TUNNEL = BIT(7), + VIRTCHNL2_CAP_SEG_TX_DOUBLE_TUNNEL = BIT(8), +}; + +/* Receive Side Scaling Flow type capability flags */ +enum virtchnl2_cap_rss { + VIRTCHNL2_CAP_RSS_IPV4_TCP = BIT(0), + VIRTCHNL2_CAP_RSS_IPV4_UDP = BIT(1), + VIRTCHNL2_CAP_RSS_IPV4_SCTP = BIT(2), + VIRTCHNL2_CAP_RSS_IPV4_OTHER = BIT(3), + VIRTCHNL2_CAP_RSS_IPV6_TCP = BIT(4), + VIRTCHNL2_CAP_RSS_IPV6_UDP = BIT(5), + VIRTCHNL2_CAP_RSS_IPV6_SCTP = BIT(6), + VIRTCHNL2_CAP_RSS_IPV6_OTHER = BIT(7), + VIRTCHNL2_CAP_RSS_IPV4_AH = BIT(8), + VIRTCHNL2_CAP_RSS_IPV4_ESP = BIT(9), + VIRTCHNL2_CAP_RSS_IPV4_AH_ESP = BIT(10), + VIRTCHNL2_CAP_RSS_IPV6_AH = BIT(11), + VIRTCHNL2_CAP_RSS_IPV6_ESP = BIT(12), + VIRTCHNL2_CAP_RSS_IPV6_AH_ESP = BIT(13), +}; + +/* Header split capability flags */ +enum virtchnl2_cap_rx_hsplit_at { + /* for prepended metadata */ + VIRTCHNL2_CAP_RX_HSPLIT_AT_L2 = BIT(0), + /* all VLANs go into header buffer */ + VIRTCHNL2_CAP_RX_HSPLIT_AT_L3 = BIT(1), + VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V4 = BIT(2), + VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V6 = BIT(3), +}; + +/* Receive Side Coalescing offload capability flags */ +enum virtchnl2_cap_rsc { + VIRTCHNL2_CAP_RSC_IPV4_TCP = BIT(0), + VIRTCHNL2_CAP_RSC_IPV4_SCTP = BIT(1), + VIRTCHNL2_CAP_RSC_IPV6_TCP = BIT(2), + VIRTCHNL2_CAP_RSC_IPV6_SCTP = BIT(3), +}; + +/* Other capability flags */ +enum virtchnl2_cap_other { + VIRTCHNL2_CAP_RDMA = BIT_ULL(0), + VIRTCHNL2_CAP_SRIOV = BIT_ULL(1), + VIRTCHNL2_CAP_MACFILTER = BIT_ULL(2), + VIRTCHNL2_CAP_FLOW_DIRECTOR = BIT_ULL(3), + /* Queue based scheduling using split queue model */ + VIRTCHNL2_CAP_SPLITQ_QSCHED = BIT_ULL(4), + VIRTCHNL2_CAP_CRC = BIT_ULL(5), + VIRTCHNL2_CAP_ADQ = BIT_ULL(6), + VIRTCHNL2_CAP_WB_ON_ITR = BIT_ULL(7), + VIRTCHNL2_CAP_PROMISC = BIT_ULL(8), + VIRTCHNL2_CAP_LINK_SPEED = BIT_ULL(9), + VIRTCHNL2_CAP_INLINE_IPSEC = BIT_ULL(10), + VIRTCHNL2_CAP_LARGE_NUM_QUEUES = BIT_ULL(11), + VIRTCHNL2_CAP_VLAN = BIT_ULL(12), + VIRTCHNL2_CAP_PTP = BIT_ULL(13), + /* EDT: Earliest Departure Time capability used for Timing Wheel */ + VIRTCHNL2_CAP_EDT = BIT_ULL(14), + VIRTCHNL2_CAP_ADV_RSS = BIT_ULL(15), + VIRTCHNL2_CAP_FDIR = BIT_ULL(16), + VIRTCHNL2_CAP_RX_FLEX_DESC = BIT_ULL(17), + VIRTCHNL2_CAP_PTYPE = BIT_ULL(18), + VIRTCHNL2_CAP_LOOPBACK = BIT_ULL(19), + /* Other capability 20 is reserved */ + + /* this must be the last capability */ + VIRTCHNL2_CAP_OEM = BIT_ULL(63), +}; + +/* underlying device type */ +enum virtchl2_device_type { + VIRTCHNL2_MEV_DEVICE = 0, +}; + +/** + * enum virtchnl2_txq_sched_mode - Transmit Queue Scheduling Modes. + * @VIRTCHNL2_TXQ_SCHED_MODE_QUEUE: Queue mode is the legacy mode i.e. inorder + * completions where descriptors and buffers + * are completed at the same time. + * @VIRTCHNL2_TXQ_SCHED_MODE_FLOW: Flow scheduling mode allows for out of order + * packet processing where descriptors are + * cleaned in order, but buffers can be + * completed out of order. + */ +enum virtchnl2_txq_sched_mode { + VIRTCHNL2_TXQ_SCHED_MODE_QUEUE = 0, + VIRTCHNL2_TXQ_SCHED_MODE_FLOW = 1, +}; + +/** + * enum virtchnl2_rxq_flags - Receive Queue Feature flags. + * @VIRTCHNL2_RXQ_RSC: Rx queue RSC flag. + * @VIRTCHNL2_RXQ_HDR_SPLIT: Rx queue header split flag. + * @VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK: When set, packet descriptors are flushed + * by hardware immediately after processing + * each packet. + * @VIRTCHNL2_RX_DESC_SIZE_16BYTE: Rx queue 16 byte descriptor size. + * @VIRTCHNL2_RX_DESC_SIZE_32BYTE: Rx queue 32 byte descriptor size. + */ +enum virtchnl2_rxq_flags { + VIRTCHNL2_RXQ_RSC = BIT(0), + VIRTCHNL2_RXQ_HDR_SPLIT = BIT(1), + VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK = BIT(2), + VIRTCHNL2_RX_DESC_SIZE_16BYTE = BIT(3), + VIRTCHNL2_RX_DESC_SIZE_32BYTE = BIT(4), +}; + +/* Type of RSS algorithm */ +enum virtchnl2_rss_alg { + VIRTCHNL2_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0, + VIRTCHNL2_RSS_ALG_R_ASYMMETRIC = 1, + VIRTCHNL2_RSS_ALG_TOEPLITZ_SYMMETRIC = 2, + VIRTCHNL2_RSS_ALG_XOR_SYMMETRIC = 3, +}; + +/* Type of event */ +enum virtchnl2_event_codes { + VIRTCHNL2_EVENT_UNKNOWN = 0, + VIRTCHNL2_EVENT_LINK_CHANGE = 1, + /* Event type 2, 3 are reserved */ +}; + +/* Transmit and Receive queue types are valid in legacy as well as split queue + * models. With Split Queue model, 2 additional types are introduced - + * TX_COMPLETION and RX_BUFFER. In split queue model, receive corresponds to + * the queue where hardware posts completions. + */ +enum virtchnl2_queue_type { + VIRTCHNL2_QUEUE_TYPE_TX = 0, + VIRTCHNL2_QUEUE_TYPE_RX = 1, + VIRTCHNL2_QUEUE_TYPE_TX_COMPLETION = 2, + VIRTCHNL2_QUEUE_TYPE_RX_BUFFER = 3, + VIRTCHNL2_QUEUE_TYPE_CONFIG_TX = 4, + VIRTCHNL2_QUEUE_TYPE_CONFIG_RX = 5, + /* Queue types 6, 7, 8, 9 are reserved */ + VIRTCHNL2_QUEUE_TYPE_MBX_TX = 10, + VIRTCHNL2_QUEUE_TYPE_MBX_RX = 11, +}; + +/* Interrupt throttling rate index */ +enum virtchnl2_itr_idx { + VIRTCHNL2_ITR_IDX_0 = 0, + VIRTCHNL2_ITR_IDX_1 = 1, +}; + +/** + * enum virtchnl2_mac_addr_type - MAC address types. + * @VIRTCHNL2_MAC_ADDR_PRIMARY: PF/VF driver should set this type for the + * primary/device unicast MAC address filter for + * VIRTCHNL2_OP_ADD_MAC_ADDR and + * VIRTCHNL2_OP_DEL_MAC_ADDR. This allows for the + * underlying control plane function to accurately + * track the MAC address and for VM/function reset. + * + * @VIRTCHNL2_MAC_ADDR_EXTRA: PF/VF driver should set this type for any extra + * unicast and/or multicast filters that are being + * added/deleted via VIRTCHNL2_OP_ADD_MAC_ADDR or + * VIRTCHNL2_OP_DEL_MAC_ADDR. + */ +enum virtchnl2_mac_addr_type { + VIRTCHNL2_MAC_ADDR_PRIMARY = 1, + VIRTCHNL2_MAC_ADDR_EXTRA = 2, +}; + +/* Flags used for promiscuous mode */ +enum virtchnl2_promisc_flags { + VIRTCHNL2_UNICAST_PROMISC = BIT(0), + VIRTCHNL2_MULTICAST_PROMISC = BIT(1), +}; + +/* Protocol header type within a packet segment. A segment consists of one or + * more protocol headers that make up a logical group of protocol headers. Each + * logical group of protocol headers encapsulates or is encapsulated using/by + * tunneling or encapsulation protocols for network virtualization. + */ +enum virtchnl2_proto_hdr_type { + /* VIRTCHNL2_PROTO_HDR_ANY is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_ANY = 0, + VIRTCHNL2_PROTO_HDR_PRE_MAC = 1, + /* VIRTCHNL2_PROTO_HDR_MAC is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_MAC = 2, + VIRTCHNL2_PROTO_HDR_POST_MAC = 3, + VIRTCHNL2_PROTO_HDR_ETHERTYPE = 4, + VIRTCHNL2_PROTO_HDR_VLAN = 5, + VIRTCHNL2_PROTO_HDR_SVLAN = 6, + VIRTCHNL2_PROTO_HDR_CVLAN = 7, + VIRTCHNL2_PROTO_HDR_MPLS = 8, + VIRTCHNL2_PROTO_HDR_UMPLS = 9, + VIRTCHNL2_PROTO_HDR_MMPLS = 10, + VIRTCHNL2_PROTO_HDR_PTP = 11, + VIRTCHNL2_PROTO_HDR_CTRL = 12, + VIRTCHNL2_PROTO_HDR_LLDP = 13, + VIRTCHNL2_PROTO_HDR_ARP = 14, + VIRTCHNL2_PROTO_HDR_ECP = 15, + VIRTCHNL2_PROTO_HDR_EAPOL = 16, + VIRTCHNL2_PROTO_HDR_PPPOD = 17, + VIRTCHNL2_PROTO_HDR_PPPOE = 18, + /* VIRTCHNL2_PROTO_HDR_IPV4 is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_IPV4 = 19, + /* IPv4 and IPv6 Fragment header types are only associated to + * VIRTCHNL2_PROTO_HDR_IPV4 and VIRTCHNL2_PROTO_HDR_IPV6 respectively, + * cannot be used independently. + */ + /* VIRTCHNL2_PROTO_HDR_IPV4_FRAG is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_IPV4_FRAG = 20, + /* VIRTCHNL2_PROTO_HDR_IPV6 is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_IPV6 = 21, + /* VIRTCHNL2_PROTO_HDR_IPV6_FRAG is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_IPV6_FRAG = 22, + VIRTCHNL2_PROTO_HDR_IPV6_EH = 23, + /* VIRTCHNL2_PROTO_HDR_UDP is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_UDP = 24, + /* VIRTCHNL2_PROTO_HDR_TCP is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_TCP = 25, + /* VIRTCHNL2_PROTO_HDR_SCTP is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_SCTP = 26, + /* VIRTCHNL2_PROTO_HDR_ICMP is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_ICMP = 27, + /* VIRTCHNL2_PROTO_HDR_ICMPV6 is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_ICMPV6 = 28, + VIRTCHNL2_PROTO_HDR_IGMP = 29, + VIRTCHNL2_PROTO_HDR_AH = 30, + VIRTCHNL2_PROTO_HDR_ESP = 31, + VIRTCHNL2_PROTO_HDR_IKE = 32, + VIRTCHNL2_PROTO_HDR_NATT_KEEP = 33, + /* VIRTCHNL2_PROTO_HDR_PAY is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_PAY = 34, + VIRTCHNL2_PROTO_HDR_L2TPV2 = 35, + VIRTCHNL2_PROTO_HDR_L2TPV2_CONTROL = 36, + VIRTCHNL2_PROTO_HDR_L2TPV3 = 37, + VIRTCHNL2_PROTO_HDR_GTP = 38, + VIRTCHNL2_PROTO_HDR_GTP_EH = 39, + VIRTCHNL2_PROTO_HDR_GTPCV2 = 40, + VIRTCHNL2_PROTO_HDR_GTPC_TEID = 41, + VIRTCHNL2_PROTO_HDR_GTPU = 42, + VIRTCHNL2_PROTO_HDR_GTPU_UL = 43, + VIRTCHNL2_PROTO_HDR_GTPU_DL = 44, + VIRTCHNL2_PROTO_HDR_ECPRI = 45, + VIRTCHNL2_PROTO_HDR_VRRP = 46, + VIRTCHNL2_PROTO_HDR_OSPF = 47, + /* VIRTCHNL2_PROTO_HDR_TUN is a mandatory protocol id */ + VIRTCHNL2_PROTO_HDR_TUN = 48, + VIRTCHNL2_PROTO_HDR_GRE = 49, + VIRTCHNL2_PROTO_HDR_NVGRE = 50, + VIRTCHNL2_PROTO_HDR_VXLAN = 51, + VIRTCHNL2_PROTO_HDR_VXLAN_GPE = 52, + VIRTCHNL2_PROTO_HDR_GENEVE = 53, + VIRTCHNL2_PROTO_HDR_NSH = 54, + VIRTCHNL2_PROTO_HDR_QUIC = 55, + VIRTCHNL2_PROTO_HDR_PFCP = 56, + VIRTCHNL2_PROTO_HDR_PFCP_NODE = 57, + VIRTCHNL2_PROTO_HDR_PFCP_SESSION = 58, + VIRTCHNL2_PROTO_HDR_RTP = 59, + VIRTCHNL2_PROTO_HDR_ROCE = 60, + VIRTCHNL2_PROTO_HDR_ROCEV1 = 61, + VIRTCHNL2_PROTO_HDR_ROCEV2 = 62, + /* Protocol ids up to 32767 are reserved. + * 32768 - 65534 are used for user defined protocol ids. + * VIRTCHNL2_PROTO_HDR_NO_PROTO is a mandatory protocol id. + */ + VIRTCHNL2_PROTO_HDR_NO_PROTO = 65535, +}; + +enum virtchl2_version { + VIRTCHNL2_VERSION_MINOR_0 = 0, + VIRTCHNL2_VERSION_MAJOR_2 = 2, +}; + +/** + * struct virtchnl2_edt_caps - Get EDT granularity and time horizon. + * @tstamp_granularity_ns: Timestamp granularity in nanoseconds. + * @time_horizon_ns: Total time window in nanoseconds. + * + * Associated with VIRTCHNL2_OP_GET_EDT_CAPS. + */ +struct virtchnl2_edt_caps { + __le64 tstamp_granularity_ns; + __le64 time_horizon_ns; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_edt_caps); + +/** + * struct virtchnl2_version_info - Version information. + * @major: Major version. + * @minor: Minor version. + * + * PF/VF posts its version number to the CP. CP responds with its version number + * in the same format, along with a return code. + * If there is a major version mismatch, then the PF/VF cannot operate. + * If there is a minor version mismatch, then the PF/VF can operate but should + * add a warning to the system log. + * + * This version opcode MUST always be specified as == 1, regardless of other + * changes in the API. The CP must always respond to this message without + * error regardless of version mismatch. + * + * Associated with VIRTCHNL2_OP_VERSION. + */ +struct virtchnl2_version_info { + __le32 major; + __le32 minor; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_version_info); + +/** + * struct virtchnl2_get_capabilities - Capabilities info. + * @csum_caps: See enum virtchnl2_cap_txrx_csum. + * @seg_caps: See enum virtchnl2_cap_seg. + * @hsplit_caps: See enum virtchnl2_cap_rx_hsplit_at. + * @rsc_caps: See enum virtchnl2_cap_rsc. + * @rss_caps: See enum virtchnl2_cap_rss. + * @other_caps: See enum virtchnl2_cap_other. + * @mailbox_dyn_ctl: DYN_CTL register offset and vector id for mailbox + * provided by CP. + * @mailbox_vector_id: Mailbox vector id. + * @num_allocated_vectors: Maximum number of allocated vectors for the device. + * @max_rx_q: Maximum number of supported Rx queues. + * @max_tx_q: Maximum number of supported Tx queues. + * @max_rx_bufq: Maximum number of supported buffer queues. + * @max_tx_complq: Maximum number of supported completion queues. + * @max_sriov_vfs: The PF sends the maximum VFs it is requesting. The CP + * responds with the maximum VFs granted. + * @max_vports: Maximum number of vports that can be supported. + * @default_num_vports: Default number of vports driver should allocate on load. + * @max_tx_hdr_size: Max header length hardware can parse/checksum, in bytes. + * @max_sg_bufs_per_tx_pkt: Max number of scatter gather buffers that can be + * sent per transmit packet without needing to be + * linearized. + * @pad: Padding. + * @reserved: Reserved. + * @device_type: See enum virtchl2_device_type. + * @min_sso_packet_len: Min packet length supported by device for single + * segment offload. + * @max_hdr_buf_per_lso: Max number of header buffers that can be used for + * an LSO. + * @pad1: Padding for future extensions. + * + * Dataplane driver sends this message to CP to negotiate capabilities and + * provides a virtchnl2_get_capabilities structure with its desired + * capabilities, max_sriov_vfs and num_allocated_vectors. + * CP responds with a virtchnl2_get_capabilities structure updated + * with allowed capabilities and the other fields as below. + * If PF sets max_sriov_vfs as 0, CP will respond with max number of VFs + * that can be created by this PF. For any other value 'n', CP responds + * with max_sriov_vfs set to min(n, x) where x is the max number of VFs + * allowed by CP's policy. max_sriov_vfs is not applicable for VFs. + * If dataplane driver sets num_allocated_vectors as 0, CP will respond with 1 + * which is default vector associated with the default mailbox. For any other + * value 'n', CP responds with a value <= n based on the CP's policy of + * max number of vectors for a PF. + * CP will respond with the vector ID of mailbox allocated to the PF in + * mailbox_vector_id and the number of itr index registers in itr_idx_map. + * It also responds with default number of vports that the dataplane driver + * should comeup with in default_num_vports and maximum number of vports that + * can be supported in max_vports. + * + * Associated with VIRTCHNL2_OP_GET_CAPS. + */ +struct virtchnl2_get_capabilities { + __le32 csum_caps; + __le32 seg_caps; + __le32 hsplit_caps; + __le32 rsc_caps; + __le64 rss_caps; + __le64 other_caps; + __le32 mailbox_dyn_ctl; + __le16 mailbox_vector_id; + __le16 num_allocated_vectors; + __le16 max_rx_q; + __le16 max_tx_q; + __le16 max_rx_bufq; + __le16 max_tx_complq; + __le16 max_sriov_vfs; + __le16 max_vports; + __le16 default_num_vports; + __le16 max_tx_hdr_size; + u8 max_sg_bufs_per_tx_pkt; + u8 pad[3]; + u8 reserved[4]; + __le32 device_type; + u8 min_sso_packet_len; + u8 max_hdr_buf_per_lso; + u8 pad1[10]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(80, virtchnl2_get_capabilities); + +/** + * struct virtchnl2_queue_reg_chunk - Single queue chunk. + * @type: See enum virtchnl2_queue_type. + * @start_queue_id: Start Queue ID. + * @num_queues: Number of queues in the chunk. + * @pad: Padding. + * @qtail_reg_start: Queue tail register offset. + * @qtail_reg_spacing: Queue tail register spacing. + * @pad1: Padding for future extensions. + */ +struct virtchnl2_queue_reg_chunk { + __le32 type; + __le32 start_queue_id; + __le32 num_queues; + __le32 pad; + __le64 qtail_reg_start; + __le32 qtail_reg_spacing; + u8 pad1[4]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_queue_reg_chunk); + +/** + * struct virtchnl2_queue_reg_chunks - Specify several chunks of contiguous + * queues. + * @num_chunks: Number of chunks. + * @pad: Padding. + * @chunks: Chunks of queue info. + */ +struct virtchnl2_queue_reg_chunks { + __le16 num_chunks; + u8 pad[6]; + struct virtchnl2_queue_reg_chunk chunks[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_reg_chunks); + +/** + * struct virtchnl2_create_vport - Create vport config info. + * @vport_type: See enum virtchnl2_vport_type. + * @txq_model: See virtchnl2_queue_model. + * @rxq_model: See virtchnl2_queue_model. + * @num_tx_q: Number of Tx queues. + * @num_tx_complq: Valid only if txq_model is split queue. + * @num_rx_q: Number of Rx queues. + * @num_rx_bufq: Valid only if rxq_model is split queue. + * @default_rx_q: Relative receive queue index to be used as default. + * @vport_index: Used to align PF and CP in case of default multiple vports, + * it is filled by the PF and CP returns the same value, to + * enable the driver to support multiple asynchronous parallel + * CREATE_VPORT requests and associate a response to a specific + * request. + * @max_mtu: Max MTU. CP populates this field on response. + * @vport_id: Vport id. CP populates this field on response. + * @default_mac_addr: Default MAC address. + * @pad: Padding. + * @rx_desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions. + * @tx_desc_ids: See VIRTCHNL2_TX_DESC_IDS definitions. + * @pad1: Padding. + * @rss_algorithm: RSS algorithm. + * @rss_key_size: RSS key size. + * @rss_lut_size: RSS LUT size. + * @rx_split_pos: See enum virtchnl2_cap_rx_hsplit_at. + * @pad2: Padding. + * @chunks: Chunks of contiguous queues. + * + * PF sends this message to CP to create a vport by filling in required + * fields of virtchnl2_create_vport structure. + * CP responds with the updated virtchnl2_create_vport structure containing the + * necessary fields followed by chunks which in turn will have an array of + * num_chunks entries of virtchnl2_queue_chunk structures. + * + * Associated with VIRTCHNL2_OP_CREATE_VPORT. + */ +struct virtchnl2_create_vport { + __le16 vport_type; + __le16 txq_model; + __le16 rxq_model; + __le16 num_tx_q; + __le16 num_tx_complq; + __le16 num_rx_q; + __le16 num_rx_bufq; + __le16 default_rx_q; + __le16 vport_index; + /* CP populates the following fields on response */ + __le16 max_mtu; + __le32 vport_id; + u8 default_mac_addr[ETH_ALEN]; + __le16 pad; + __le64 rx_desc_ids; + __le64 tx_desc_ids; + u8 pad1[72]; + __le32 rss_algorithm; + __le16 rss_key_size; + __le16 rss_lut_size; + __le32 rx_split_pos; + u8 pad2[20]; + struct virtchnl2_queue_reg_chunks chunks; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(160, virtchnl2_create_vport); + +/** + * struct virtchnl2_vport - Vport ID info. + * @vport_id: Vport id. + * @pad: Padding for future extensions. + * + * PF sends this message to CP to destroy, enable or disable a vport by filling + * in the vport_id in virtchnl2_vport structure. + * CP responds with the status of the requested operation. + * + * Associated with VIRTCHNL2_OP_DESTROY_VPORT, VIRTCHNL2_OP_ENABLE_VPORT, + * VIRTCHNL2_OP_DISABLE_VPORT. + */ +struct virtchnl2_vport { + __le32 vport_id; + u8 pad[4]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_vport); + +/** + * struct virtchnl2_txq_info - Transmit queue config info + * @dma_ring_addr: DMA address. + * @type: See enum virtchnl2_queue_type. + * @queue_id: Queue ID. + * @relative_queue_id: Valid only if queue model is split and type is transmit + * queue. Used in many to one mapping of transmit queues to + * completion queue. + * @model: See enum virtchnl2_queue_model. + * @sched_mode: See enum virtchnl2_txq_sched_mode. + * @qflags: TX queue feature flags. + * @ring_len: Ring length. + * @tx_compl_queue_id: Valid only if queue model is split and type is transmit + * queue. + * @peer_type: Valid only if queue type is VIRTCHNL2_QUEUE_TYPE_MAILBOX_TX + * @peer_rx_queue_id: Valid only if queue type is CONFIG_TX and used to deliver + * messages for the respective CONFIG_TX queue. + * @pad: Padding. + * @egress_pasid: Egress PASID info. + * @egress_hdr_pasid: Egress HDR passid. + * @egress_buf_pasid: Egress buf passid. + * @pad1: Padding for future extensions. + */ +struct virtchnl2_txq_info { + __le64 dma_ring_addr; + __le32 type; + __le32 queue_id; + __le16 relative_queue_id; + __le16 model; + __le16 sched_mode; + __le16 qflags; + __le16 ring_len; + __le16 tx_compl_queue_id; + __le16 peer_type; + __le16 peer_rx_queue_id; + u8 pad[4]; + __le32 egress_pasid; + __le32 egress_hdr_pasid; + __le32 egress_buf_pasid; + u8 pad1[8]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(56, virtchnl2_txq_info); + +/** + * struct virtchnl2_config_tx_queues - TX queue config. + * @vport_id: Vport id. + * @num_qinfo: Number of virtchnl2_txq_info structs. + * @pad: Padding. + * @qinfo: Tx queues config info. + * + * PF sends this message to set up parameters for one or more transmit queues. + * This message contains an array of num_qinfo instances of virtchnl2_txq_info + * structures. CP configures requested queues and returns a status code. If + * num_qinfo specified is greater than the number of queues associated with the + * vport, an error is returned and no queues are configured. + * + * Associated with VIRTCHNL2_OP_CONFIG_TX_QUEUES. + */ +struct virtchnl2_config_tx_queues { + __le32 vport_id; + __le16 num_qinfo; + u8 pad[10]; + struct virtchnl2_txq_info qinfo[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_config_tx_queues); + +/** + * struct virtchnl2_rxq_info - Receive queue config info. + * @desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions. + * @dma_ring_addr: See VIRTCHNL2_RX_DESC_IDS definitions. + * @type: See enum virtchnl2_queue_type. + * @queue_id: Queue id. + * @model: See enum virtchnl2_queue_model. + * @hdr_buffer_size: Header buffer size. + * @data_buffer_size: Data buffer size. + * @max_pkt_size: Max packet size. + * @ring_len: Ring length. + * @buffer_notif_stride: Buffer notification stride in units of 32-descriptors. + * This field must be a power of 2. + * @pad: Padding. + * @dma_head_wb_addr: Applicable only for receive buffer queues. + * @qflags: Applicable only for receive completion queues. + * See enum virtchnl2_rxq_flags. + * @rx_buffer_low_watermark: Rx buffer low watermark. + * @rx_bufq1_id: Buffer queue index of the first buffer queue associated with + * the Rx queue. Valid only in split queue model. + * @rx_bufq2_id: Buffer queue index of the second buffer queue associated with + * the Rx queue. Valid only in split queue model. + * @bufq2_ena: It indicates if there is a second buffer, rx_bufq2_id is valid + * only if this field is set. + * @pad1: Padding. + * @ingress_pasid: Ingress PASID. + * @ingress_hdr_pasid: Ingress PASID header. + * @ingress_buf_pasid: Ingress PASID buffer. + * @pad2: Padding for future extensions. + */ +struct virtchnl2_rxq_info { + __le64 desc_ids; + __le64 dma_ring_addr; + __le32 type; + __le32 queue_id; + __le16 model; + __le16 hdr_buffer_size; + __le32 data_buffer_size; + __le32 max_pkt_size; + __le16 ring_len; + u8 buffer_notif_stride; + u8 pad; + __le64 dma_head_wb_addr; + __le16 qflags; + __le16 rx_buffer_low_watermark; + __le16 rx_bufq1_id; + __le16 rx_bufq2_id; + u8 bufq2_ena; + u8 pad1[3]; + __le32 ingress_pasid; + __le32 ingress_hdr_pasid; + __le32 ingress_buf_pasid; + u8 pad2[16]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(88, virtchnl2_rxq_info); + +/** + * struct virtchnl2_config_rx_queues - Rx queues config. + * @vport_id: Vport id. + * @num_qinfo: Number of instances. + * @pad: Padding. + * @qinfo: Rx queues config info. + * + * PF sends this message to set up parameters for one or more receive queues. + * This message contains an array of num_qinfo instances of virtchnl2_rxq_info + * structures. CP configures requested queues and returns a status code. + * If the number of queues specified is greater than the number of queues + * associated with the vport, an error is returned and no queues are configured. + * + * Associated with VIRTCHNL2_OP_CONFIG_RX_QUEUES. + */ +struct virtchnl2_config_rx_queues { + __le32 vport_id; + __le16 num_qinfo; + u8 pad[18]; + struct virtchnl2_rxq_info qinfo[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_config_rx_queues); + +/** + * struct virtchnl2_add_queues - data for VIRTCHNL2_OP_ADD_QUEUES. + * @vport_id: Vport id. + * @num_tx_q: Number of Tx qieues. + * @num_tx_complq: Number of Tx completion queues. + * @num_rx_q: Number of Rx queues. + * @num_rx_bufq: Number of Rx buffer queues. + * @pad: Padding. + * @chunks: Chunks of contiguous queues. + * + * PF sends this message to request additional transmit/receive queues beyond + * the ones that were assigned via CREATE_VPORT request. virtchnl2_add_queues + * structure is used to specify the number of each type of queues. + * CP responds with the same structure with the actual number of queues assigned + * followed by num_chunks of virtchnl2_queue_chunk structures. + * + * Associated with VIRTCHNL2_OP_ADD_QUEUES. + */ +struct virtchnl2_add_queues { + __le32 vport_id; + __le16 num_tx_q; + __le16 num_tx_complq; + __le16 num_rx_q; + __le16 num_rx_bufq; + u8 pad[4]; + struct virtchnl2_queue_reg_chunks chunks; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_add_queues); + +/** + * struct virtchnl2_vector_chunk - Structure to specify a chunk of contiguous + * interrupt vectors. + * @start_vector_id: Start vector id. + * @start_evv_id: Start EVV id. + * @num_vectors: Number of vectors. + * @pad: Padding. + * @dynctl_reg_start: DYN_CTL register offset. + * @dynctl_reg_spacing: register spacing between DYN_CTL registers of 2 + * consecutive vectors. + * @itrn_reg_start: ITRN register offset. + * @itrn_reg_spacing: Register spacing between dynctl registers of 2 + * consecutive vectors. + * @itrn_index_spacing: Register spacing between itrn registers of the same + * vector where n=0..2. + * @pad1: Padding for future extensions. + * + * Register offsets and spacing provided by CP. + * Dynamic control registers are used for enabling/disabling/re-enabling + * interrupts and updating interrupt rates in the hotpath. Any changes + * to interrupt rates in the dynamic control registers will be reflected + * in the interrupt throttling rate registers. + * itrn registers are used to update interrupt rates for specific + * interrupt indices without modifying the state of the interrupt. + */ +struct virtchnl2_vector_chunk { + __le16 start_vector_id; + __le16 start_evv_id; + __le16 num_vectors; + __le16 pad; + __le32 dynctl_reg_start; + __le32 dynctl_reg_spacing; + __le32 itrn_reg_start; + __le32 itrn_reg_spacing; + __le32 itrn_index_spacing; + u8 pad1[4]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_vector_chunk); + +/** + * struct virtchnl2_vector_chunks - chunks of contiguous interrupt vectors. + * @num_vchunks: number of vector chunks. + * @pad: Padding. + * @vchunks: Chunks of contiguous vector info. + * + * PF sends virtchnl2_vector_chunks struct to specify the vectors it is giving + * away. CP performs requested action and returns status. + * + * Associated with VIRTCHNL2_OP_DEALLOC_VECTORS. + */ +struct virtchnl2_vector_chunks { + __le16 num_vchunks; + u8 pad[14]; + struct virtchnl2_vector_chunk vchunks[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_vector_chunks); + +/** + * struct virtchnl2_alloc_vectors - vector allocation info. + * @num_vectors: Number of vectors. + * @pad: Padding. + * @vchunks: Chunks of contiguous vector info. + * + * PF sends this message to request additional interrupt vectors beyond the + * ones that were assigned via GET_CAPS request. virtchnl2_alloc_vectors + * structure is used to specify the number of vectors requested. CP responds + * with the same structure with the actual number of vectors assigned followed + * by virtchnl2_vector_chunks structure identifying the vector ids. + * + * Associated with VIRTCHNL2_OP_ALLOC_VECTORS. + */ +struct virtchnl2_alloc_vectors { + __le16 num_vectors; + u8 pad[14]; + struct virtchnl2_vector_chunks vchunks; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_alloc_vectors); + +/** + * struct virtchnl2_rss_lut - RSS LUT info. + * @vport_id: Vport id. + * @lut_entries_start: Start of LUT entries. + * @lut_entries: Number of LUT entrties. + * @pad: Padding. + * @lut: RSS lookup table. + * + * PF sends this message to get or set RSS lookup table. Only supported if + * both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit during configuration + * negotiation. + * + * Associated with VIRTCHNL2_OP_GET_RSS_LUT and VIRTCHNL2_OP_SET_RSS_LUT. + */ +struct virtchnl2_rss_lut { + __le32 vport_id; + __le16 lut_entries_start; + __le16 lut_entries; + u8 pad[4]; + __le32 lut[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(12, virtchnl2_rss_lut); + +/** + * struct virtchnl2_rss_hash - RSS hash info. + * @ptype_groups: Packet type groups bitmap. + * @vport_id: Vport id. + * @pad: Padding for future extensions. + * + * PF sends these messages to get and set the hash filter enable bits for RSS. + * By default, the CP sets these to all possible traffic types that the + * hardware supports. The PF can query this value if it wants to change the + * traffic types that are hashed by the hardware. + * Only supported if both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit + * during configuration negotiation. + * + * Associated with VIRTCHNL2_OP_GET_RSS_HASH and VIRTCHNL2_OP_SET_RSS_HASH + */ +struct virtchnl2_rss_hash { + __le64 ptype_groups; + __le32 vport_id; + u8 pad[4]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_rss_hash); + +/** + * struct virtchnl2_sriov_vfs_info - VFs info. + * @num_vfs: Number of VFs. + * @pad: Padding for future extensions. + * + * This message is used to set number of SRIOV VFs to be created. The actual + * allocation of resources for the VFs in terms of vport, queues and interrupts + * is done by CP. When this call completes, the IDPF driver calls + * pci_enable_sriov to let the OS instantiate the SRIOV PCIE devices. + * The number of VFs set to 0 will destroy all the VFs of this function. + * + * Associated with VIRTCHNL2_OP_SET_SRIOV_VFS. + */ +struct virtchnl2_sriov_vfs_info { + __le16 num_vfs; + __le16 pad; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(4, virtchnl2_sriov_vfs_info); + +/** + * struct virtchnl2_ptype - Packet type info. + * @ptype_id_10: 10-bit packet type. + * @ptype_id_8: 8-bit packet type. + * @proto_id_count: Number of protocol ids the packet supports, maximum of 32 + * protocol ids are supported. + * @pad: Padding. + * @proto_id: proto_id_count decides the allocation of protocol id array. + * See enum virtchnl2_proto_hdr_type. + * + * Based on the descriptor type the PF supports, CP fills ptype_id_10 or + * ptype_id_8 for flex and base descriptor respectively. If ptype_id_10 value + * is set to 0xFFFF, PF should consider this ptype as dummy one and it is the + * last ptype. + */ +struct virtchnl2_ptype { + __le16 ptype_id_10; + u8 ptype_id_8; + u8 proto_id_count; + __le16 pad; + __le16 proto_id[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype); + +/** + * struct virtchnl2_get_ptype_info - Packet type info. + * @start_ptype_id: Starting ptype ID. + * @num_ptypes: Number of packet types from start_ptype_id. + * @pad: Padding for future extensions. + * + * The total number of supported packet types is based on the descriptor type. + * For the flex descriptor, it is 1024 (10-bit ptype), and for the base + * descriptor, it is 256 (8-bit ptype). Send this message to the CP by + * populating the 'start_ptype_id' and the 'num_ptypes'. CP responds with the + * 'start_ptype_id', 'num_ptypes', and the array of ptype (virtchnl2_ptype) that + * are added at the end of the 'virtchnl2_get_ptype_info' message (Note: There + * is no specific field for the ptypes but are added at the end of the + * ptype info message. PF/VF is expected to extract the ptypes accordingly. + * Reason for doing this is because compiler doesn't allow nested flexible + * array fields). + * + * If all the ptypes don't fit into one mailbox buffer, CP splits the + * ptype info into multiple messages, where each message will have its own + * 'start_ptype_id', 'num_ptypes', and the ptype array itself. When CP is done + * updating all the ptype information extracted from the package (the number of + * ptypes extracted might be less than what PF/VF expects), it will append a + * dummy ptype (which has 'ptype_id_10' of 'struct virtchnl2_ptype' as 0xFFFF) + * to the ptype array. + * + * PF/VF is expected to receive multiple VIRTCHNL2_OP_GET_PTYPE_INFO messages. + * + * Associated with VIRTCHNL2_OP_GET_PTYPE_INFO. + */ +struct virtchnl2_get_ptype_info { + __le16 start_ptype_id; + __le16 num_ptypes; + __le32 pad; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_get_ptype_info); + +/** + * struct virtchnl2_vport_stats - Vport statistics. + * @vport_id: Vport id. + * @pad: Padding. + * @rx_bytes: Received bytes. + * @rx_unicast: Received unicast packets. + * @rx_multicast: Received multicast packets. + * @rx_broadcast: Received broadcast packets. + * @rx_discards: Discarded packets on receive. + * @rx_errors: Receive errors. + * @rx_unknown_protocol: Unlnown protocol. + * @tx_bytes: Transmitted bytes. + * @tx_unicast: Transmitted unicast packets. + * @tx_multicast: Transmitted multicast packets. + * @tx_broadcast: Transmitted broadcast packets. + * @tx_discards: Discarded packets on transmit. + * @tx_errors: Transmit errors. + * @rx_invalid_frame_length: Packets with invalid frame length. + * @rx_overflow_drop: Packets dropped on buffer overflow. + * + * PF/VF sends this message to CP to get the update stats by specifying the + * vport_id. CP responds with stats in struct virtchnl2_vport_stats. + * + * Associated with VIRTCHNL2_OP_GET_STATS. + */ +struct virtchnl2_vport_stats { + __le32 vport_id; + u8 pad[4]; + __le64 rx_bytes; + __le64 rx_unicast; + __le64 rx_multicast; + __le64 rx_broadcast; + __le64 rx_discards; + __le64 rx_errors; + __le64 rx_unknown_protocol; + __le64 tx_bytes; + __le64 tx_unicast; + __le64 tx_multicast; + __le64 tx_broadcast; + __le64 tx_discards; + __le64 tx_errors; + __le64 rx_invalid_frame_length; + __le64 rx_overflow_drop; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(128, virtchnl2_vport_stats); + +/** + * struct virtchnl2_event - Event info. + * @event: Event opcode. See enum virtchnl2_event_codes. + * @link_speed: Link_speed provided in Mbps. + * @vport_id: Vport ID. + * @link_status: Link status. + * @pad: Padding. + * @reserved: Reserved. + * + * CP sends this message to inform the PF/VF driver of events that may affect + * it. No direct response is expected from the driver, though it may generate + * other messages in response to this one. + * + * Associated with VIRTCHNL2_OP_EVENT. + */ +struct virtchnl2_event { + __le32 event; + __le32 link_speed; + __le32 vport_id; + u8 link_status; + u8 pad; + __le16 reserved; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_event); + +/** + * struct virtchnl2_rss_key - RSS key info. + * @vport_id: Vport id. + * @key_len: Length of RSS key. + * @pad: Padding. + * @key_flex: RSS hash key, packed bytes. + * PF/VF sends this message to get or set RSS key. Only supported if both + * PF/VF and CP drivers set the VIRTCHNL2_CAP_RSS bit during configuration + * negotiation. + * + * Associated with VIRTCHNL2_OP_GET_RSS_KEY and VIRTCHNL2_OP_SET_RSS_KEY. + */ +struct virtchnl2_rss_key { + __le32 vport_id; + __le16 key_len; + u8 pad; + __DECLARE_FLEX_ARRAY(u8, key_flex); +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_rss_key); + +/** + * struct virtchnl2_queue_chunk - chunk of contiguous queues + * @type: See enum virtchnl2_queue_type. + * @start_queue_id: Starting queue id. + * @num_queues: Number of queues. + * @pad: Padding for future extensions. + */ +struct virtchnl2_queue_chunk { + __le32 type; + __le32 start_queue_id; + __le32 num_queues; + u8 pad[4]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_chunk); + +/* struct virtchnl2_queue_chunks - chunks of contiguous queues + * @num_chunks: Number of chunks. + * @pad: Padding. + * @chunks: Chunks of contiguous queues info. + */ +struct virtchnl2_queue_chunks { + __le16 num_chunks; + u8 pad[6]; + struct virtchnl2_queue_chunk chunks[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_chunks); + +/** + * struct virtchnl2_del_ena_dis_queues - Enable/disable queues info. + * @vport_id: Vport id. + * @pad: Padding. + * @chunks: Chunks of contiguous queues info. + * + * PF sends these messages to enable, disable or delete queues specified in + * chunks. PF sends virtchnl2_del_ena_dis_queues struct to specify the queues + * to be enabled/disabled/deleted. Also applicable to single queue receive or + * transmit. CP performs requested action and returns status. + * + * Associated with VIRTCHNL2_OP_ENABLE_QUEUES, VIRTCHNL2_OP_DISABLE_QUEUES and + * VIRTCHNL2_OP_DISABLE_QUEUES. + */ +struct virtchnl2_del_ena_dis_queues { + __le32 vport_id; + u8 pad[4]; + struct virtchnl2_queue_chunks chunks; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_del_ena_dis_queues); + +/** + * struct virtchnl2_queue_vector - Queue to vector mapping. + * @queue_id: Queue id. + * @vector_id: Vector id. + * @pad: Padding. + * @itr_idx: See enum virtchnl2_itr_idx. + * @queue_type: See enum virtchnl2_queue_type. + * @pad1: Padding for future extensions. + */ +struct virtchnl2_queue_vector { + __le32 queue_id; + __le16 vector_id; + u8 pad[2]; + __le32 itr_idx; + __le32 queue_type; + u8 pad1[8]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_queue_vector); + +/** + * struct virtchnl2_queue_vector_maps - Map/unmap queues info. + * @vport_id: Vport id. + * @num_qv_maps: Number of queue vector maps. + * @pad: Padding. + * @qv_maps: Queue to vector maps. + * + * PF sends this message to map or unmap queues to vectors and interrupt + * throttling rate index registers. External data buffer contains + * virtchnl2_queue_vector_maps structure that contains num_qv_maps of + * virtchnl2_queue_vector structures. CP maps the requested queue vector maps + * after validating the queue and vector ids and returns a status code. + * + * Associated with VIRTCHNL2_OP_MAP_QUEUE_VECTOR and + * VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR. + */ +struct virtchnl2_queue_vector_maps { + __le32 vport_id; + __le16 num_qv_maps; + u8 pad[10]; + struct virtchnl2_queue_vector qv_maps[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_vector_maps); + +/** + * struct virtchnl2_loopback - Loopback info. + * @vport_id: Vport id. + * @enable: Enable/disable. + * @pad: Padding for future extensions. + * + * PF/VF sends this message to transition to/from the loopback state. Setting + * the 'enable' to 1 enables the loopback state and setting 'enable' to 0 + * disables it. CP configures the state to loopback and returns status. + * + * Associated with VIRTCHNL2_OP_LOOPBACK. + */ +struct virtchnl2_loopback { + __le32 vport_id; + u8 enable; + u8 pad[3]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_loopback); + +/* struct virtchnl2_mac_addr - MAC address info. + * @addr: MAC address. + * @type: MAC type. See enum virtchnl2_mac_addr_type. + * @pad: Padding for future extensions. + */ +struct virtchnl2_mac_addr { + u8 addr[ETH_ALEN]; + u8 type; + u8 pad; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr); + +/** + * struct virtchnl2_mac_addr_list - List of MAC addresses. + * @vport_id: Vport id. + * @num_mac_addr: Number of MAC addresses. + * @pad: Padding. + * @mac_addr_list: List with MAC address info. + * + * PF/VF driver uses this structure to send list of MAC addresses to be + * added/deleted to the CP where as CP performs the action and returns the + * status. + * + * Associated with VIRTCHNL2_OP_ADD_MAC_ADDR and VIRTCHNL2_OP_DEL_MAC_ADDR. + */ +struct virtchnl2_mac_addr_list { + __le32 vport_id; + __le16 num_mac_addr; + u8 pad[2]; + struct virtchnl2_mac_addr mac_addr_list[]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr_list); + +/** + * struct virtchnl2_promisc_info - Promisc type info. + * @vport_id: Vport id. + * @flags: See enum virtchnl2_promisc_flags. + * @pad: Padding for future extensions. + * + * PF/VF sends vport id and flags to the CP where as CP performs the action + * and returns the status. + * + * Associated with VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE. + */ +struct virtchnl2_promisc_info { + __le32 vport_id; + /* See VIRTCHNL2_PROMISC_FLAGS definitions */ + __le16 flags; + u8 pad[2]; +}; +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_promisc_info); + +#endif /* _VIRTCHNL_2_H_ */ |